| # Apache Tomcat 6.0 |

# Apache Tomcat 6.0 ## Jasper 2 JSP Engine How To |
Table of Contents
Introduction Configuration Production Configuration Web Application Compilation Using Jikes
Introduction
Tomcat 6.0 uses the Jasper 2 JSP Engine to implement the JavaServer Pages 2.0 specification. Jasper 2 has been redesigned to significantly improve performance over the orignal Jasper. In addition to general code improvements the following changes were made: JSP Custom Tag Pooling - The java objects instantiated for JSP Custom Tags can now be pooled and reused. This significantly boosts the performance of JSP pages which use custom tags. Background JSP compilation - If you make a change to a JSP page which had already been compiled Jasper 2 can recompile that page in the background. The previously compiled JSP page will still be available to serve requests. Once the new page has been compiled successfully it will replace the old page. This helps improve availablity of your JSP pages on a production server. Recompile JSP when included page changes - Jasper 2 can now detect when a page included at compile time from a JSP has changed and then recompile the parent JSP. JDT used to compile JSP pages - The Eclipse JDT Java compiler is now used to perform JSP java source code compilation. This compiler loads source dependencies from the container classloader. Ant and javac can still be used. Jasper is implemented using the servlet class `org.apache.jasper.servlet.JspServlet`.
Configuration
By default Jasper is configured for use when doing web application development. See the section Production Configuration for information on configuring Jasper for use on a production Tomcat server. The servlet which implements Jasper is configured using init parameters in your global `$CATALINA_BASE/conf/web.xml`. checkInterval - If development is false and reloading is true, background compiles are enabled. checkInterval is the time in seconds between checks to see if a JSP page needs to be recompiled. Default `300` seconds. compiler - Which compiler Ant should use to compile JSP pages. See the Ant documentation for more information. If the value is not set, then the default Eclipse JDT Java compiler will be used instead of using Ant. No default value. classdebuginfo - Should the class file be compiled with debugging information? `true` or `false`, default `true`. classpath - Defines the class path to be used to compile the generated servlets. This parameter only has an effect if the ServletContext attribute org.apache.jasper.Constants.SERVLET_CLASSPATH is not set. This attribute is always set when Jasper is used within Tomcat. By default the classpath is created dynamically based on the current web application. compilerSourceVM - What JDK version are the source files compatible with? (Default JDK 1.4) compilerTargetVM - What JDK version are the generated files compatible with? (Default JDK 1.4) development - Is Jasper used in development mode (will check for JSP modification on every access)? `true` or `false`, default `true`. enablePooling - Determines whether tag handler pooling is enabled. `true` or `false`, default `true`. engineOptionsClass - Allows specifying the Options class used to configure Jasper. If not present, the default EmbeddedServletOptions will be used. ieClassId - The class-id value to be sent to Internet Explorer when using <jsp:plugin> tags. Default `clsid:8AD9C840-044E-11D1-B3E9-00805F499D93`. fork - Have Ant fork JSP page compiles so they are performed in a seperate JVM from Tomcat? `true` or `false`, default `true`. javaEncoding - Java file encoding to use for generating java source files. Default `UTF8`. genStringAsCharArray - Should text strings be generated as char arrays, to improve performance in some cases? Default `false`. keepgenerated - Should we keep the generated Java source code for each page instead of deleting it? `true` or `false`, default `true`. mappedfile - Should we generate static content with one print statement per input line, to ease debugging? `true` or `false`, default `true`. modificationTestInterval - Checks for modification for a given JSP file (and all its dependent files) will be performed only once every specified amount of seconds. Setting this to 0 will cause the JSP to be checked on every access. Default is `4` seconds. reloading - Should Jasper check for modified JSPs? `true` or `false`, default `false`. scratchdir - What scratch directory should we use when compiling JSP pages? Default is the work directory for the current web application. trimSpaces - Should white spaces in template text between actions or directives be trimmed ?, default `false`. The Java compiler from Eclipse JDT in included as the default compiler. It is an advanced Java compiler which will load all dependencies from the Tomcat class loader, which will help tremendously when compiling on large installations with tens of JARs. On fast servers, this will allow sub-second recompilation cycles for even large JSP pages. Apache Ant, which was used in previous Tomcat releases, can be used instead instead of the new compiler by simply removing the `lib/jasper-jdt.jar` file, and placing the `ant.jar` file from the latest Ant distribution in the `lib` folder. If you do this, you also need to use the "javac" argument to catalina.sh.
Production Configuration
The main JSP optimization which can be done is precompilation of JSPs. However, this might not be possible (for example, when using the jsp-property-group feature) or practical, in which case the configuration of the Jasper servlet becomes critical. When using Jasper 2 in a production Tomcat server you should consider making the following changes from the default configuration. development - To disable on access checks for JSP pages compilation set this to `false`. genStringAsCharArray - To generate slightly more efficient char arrays, set this to `true`. modificationTestInterval - If development has to be set to `true` for any reason (such as dynamic generation of JSPs), setting this to a high value will improve performance a lot. trimSpaces - To remove useless bytes from the response, set this to `true`.
Web Application Compilation
> Using Ant is the preferred way to compile web applications using JSPC. Use the script given below (a similar script is included in the "deployer" download) to precompile a webapp:
>     <project name="Webapp Precompilation" default="all" basedir=".">

>        <import file="${tomcat.home}/bin/catalina-tasks.xml"/>

>        <target name="jspc">

>         <jasper
>                  validateXml="false"
>                  uriroot="${webapp.path}"
>                  webXmlFragment="${webapp.path}/WEB-INF/generated_web.xml"
>                  outputDir="${webapp.path}/WEB-INF/src" />

>       </target>

>       <target name="compile">

>         <mkdir dir="${webapp.path}/WEB-INF/classes"/>
>         <mkdir dir="${webapp.path}/WEB-INF/lib"/>

>         <javac destdir="${webapp.path}/WEB-INF/classes"
>                optimize="off"
>                debug="on" failonerror="false"
>                srcdir="${webapp.path}/WEB-INF/src"
>     	   excludes="**/*.smap">
>           <classpath>
>             <pathelement location="${webapp.path}/WEB-INF/classes"/>
>             <fileset dir="${webapp.path}/WEB-INF/lib">
>               <include name="*.jar"/>
>             </fileset>
>             <pathelement location="${tomcat.home}/lib"/>
>             <fileset dir="${tomcat.home}/common/lib">
>               <include name="*.jar"/>
>             </fileset>
>             <fileset dir="${tomcat.home}/bin">
>               <include name="*.jar"/>
>             </fileset>
>           </classpath>
>           <include name="**" />
>           <exclude name="tags/**" />
>         </javac>

>       </target>

>       <target name="all" depends="jspc,compile">
>       </target>

>       <target name="cleanup">
>       	<delete>
>             <fileset dir="${webapp.path}/WEB-INF/src"/>
>             <fileset dir="${webapp.path}/WEB-INF/classes/org/apache/jsp"/>
>       	</delete>
>       </target>

>     </project>
> The following command line can be used to run the script (replacing the tokens with the Tomcat base path and the path to the webapp which should be precompiled):
>     $ANT_HOME/bin/ant -Dtomcat.home=<$TOMCAT_HOME> -Dwebapp.path=<$WEBAPP_PATH>
Then, the declarations and mappings for the servlets which were generated during the precompilation must be added to the web application deployment descriptor. Insert the `${webapp.path}/WEB-INF/generated_web.xml` at the right place inside the `${webapp.path}/WEB-INF/web.xml` file. Restart the web application (using the manager) and test it to verify it is running fine with precompiled servlets. An appropriate token placed in the web application deployment descriptor may also be used to automatically insert the generated servlet declarations and mappings using Ant filtering capabilities. This is actually how all the webapps distributed with Tomcat are automatically compiled as part of the build process. At the jasper2 task you can use the option `addWebXmlMappings` for automatic merge the `${webapp.path}/WEB-INF/generated_web.xml` with the current web application deployment descriptor at `${webapp.path}/WEB-INF/web.xml`. When you want to use Java 5 feature inside your jsp's, add the following javac compiler task attributes: `source="1.5" target="1.5"`. For live application you can also compile with `optimize="on"` and without debug info `debug="off"`. When you don't want to stop the jsp generation at first jsp syntax error, use `failOnError="false"`and with `showSuccess="true"` all successfull jsp to java generation are printed out. Sometimes it is very helpfull, when you cleanup the generate java source files at `${webapp.path}/WEB-INF/src` and the compile jsp servlet classes at `${webapp.path}/WEB-INF/classes/org/apache/jsp`. Hints: When you switch to another tomcat release, then regenerate and recompile your jsp's with this version again! Use java system property at server runtime to disable tag pooling `org.apache.jasper.runtime.JspFactoryImpl.USE_POOL=false`. and limit the buffering with `org.apache.jasper.runtime.BodyContentImpl.LIMIT_BUFFER=true`. Note that changing from the defaults may affect performance, but depending on the application.
Using Jikes
If you wish to use Jikes to compile JSP pages: From your Ant installation, copy ant.jar and (if it's available: Ant 1.5 and later) ant-launcher.jar to `$CATALINA_BASE/lib`. Download and install jikes. jikes must support the -encoding option. Execute `jikes -help` to verify that it was built with support for `-encoding`. Set the init parameter `compiler` to `jikes`. Define the property `-Dbuild.compiler.emacs=true` when starting Tomcat by adding it to your `CATALINA_OPTS` environment variable. This changes how jikes outputs error messages so that it is compatible with Jasper. If you get an error reporting that jikes can't use UTF8 encoding, try setting the init parameter `javaEncoding` to `ISO-8859-1`.
Copyright © 1999-2006, Apache Software Foundation