String directConnectGatewayId
The ID of the Direct Connect gateway.
String proposalId
The ID of the request proposal.
String associatedGatewayOwnerAccount
The ID of the Amazon Web Services account that owns the virtual private gateway or transit gateway.
SdkInternalList<T> overrideAllowedPrefixesToDirectConnectGateway
Overrides the Amazon VPC prefixes advertised to the Direct Connect gateway.
For information about how to set the prefixes, see Allowed Prefixes in the Direct Connect User Guide.
DirectConnectGatewayAssociation directConnectGatewayAssociation
String bandwidth
The bandwidth of the connection. The possible values are 50Mbps, 100Mbps, 200Mbps, 300Mbps, 400Mbps, 500Mbps, 1Gbps, 2Gbps, 5Gbps, and 10Gbps. Note that only those Direct Connect Partners who have met specific requirements are allowed to create a 1Gbps, 2Gbps, 5Gbps or 10Gbps hosted connection.
String connectionName
The name of the provisioned connection.
String ownerAccount
The ID of the Amazon Web Services account of the customer for whom the connection will be provisioned.
String interconnectId
The ID of the interconnect on which the connection will be provisioned.
Integer vlan
The dedicated VLAN provisioned to the connection.
String ownerAccount
The ID of the Amazon Web Services account that owns the connection.
String connectionId
The ID of the connection.
String connectionName
The name of the connection.
String connectionState
The state of the connection. The following are the possible values:
ordering: The initial state of a hosted connection provisioned on an interconnect. The connection
stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
requested: The initial state of a standard connection. The connection stays in the requested state
until the Letter of Authorization (LOA) is sent to the customer.
pending: The connection has been approved and is being initialized.
available: The network link is up and the connection is ready for use.
down: The network link is down.
deleting: The connection is being deleted.
deleted: The connection has been deleted.
rejected: A hosted connection in the ordering state enters the rejected
state if it is deleted by the customer.
unknown: The state of the connection is not available.
String region
The Amazon Web Services Region where the connection is located.
String location
The location of the connection.
String bandwidth
The bandwidth of the connection.
Integer vlan
The ID of the VLAN.
String partnerName
The name of the Direct Connect service provider associated with the connection.
Date loaIssueTime
The time of the most recent call to DescribeLoa for this connection.
String lagId
The ID of the LAG.
String awsDevice
The Direct Connect endpoint on which the physical connection terminates.
Boolean jumboFrameCapable
Indicates whether jumbo frames are supported.
String awsDeviceV2
The Direct Connect endpoint that terminates the physical connection.
String awsLogicalDeviceId
The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.
String hasLogicalRedundancy
Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).
SdkInternalList<T> tags
The tags associated with the connection.
String providerName
The name of the service provider associated with the connection.
Boolean macSecCapable
Indicates whether the connection supports MAC Security (MACsec).
String portEncryptionStatus
The MAC Security (MACsec) port link status of the connection.
The valid values are Encryption Up, which means that there is an active Connection Key Name, or
Encryption Down.
String encryptionMode
The MAC Security (MACsec) connection encryption mode.
The valid values are no_encrypt, should_encrypt, and must_encrypt.
SdkInternalList<T> macSecKeys
The MAC Security (MACsec) security keys associated with the connection.
String connectionId
The ID of the interconnect or LAG.
String ownerAccount
The ID of the Amazon Web Services account ID of the customer for the connection.
String bandwidth
The bandwidth of the connection. The possible values are 50Mbps, 100Mbps, 200Mbps, 300Mbps, 400Mbps, 500Mbps, 1Gbps, 2Gbps, 5Gbps, and 10Gbps. Note that only those Direct Connect Partners who have met specific requirements are allowed to create a 1Gbps, 2Gbps, 5Gbps or 10Gbps hosted connection.
String connectionName
The name of the hosted connection.
Integer vlan
The dedicated VLAN provisioned to the hosted connection.
SdkInternalList<T> tags
The tags associated with the connection.
String ownerAccount
The ID of the Amazon Web Services account that owns the connection.
String connectionId
The ID of the connection.
String connectionName
The name of the connection.
String connectionState
The state of the connection. The following are the possible values:
ordering: The initial state of a hosted connection provisioned on an interconnect. The connection
stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
requested: The initial state of a standard connection. The connection stays in the requested state
until the Letter of Authorization (LOA) is sent to the customer.
pending: The connection has been approved and is being initialized.
available: The network link is up and the connection is ready for use.
down: The network link is down.
deleting: The connection is being deleted.
deleted: The connection has been deleted.
rejected: A hosted connection in the ordering state enters the rejected
state if it is deleted by the customer.
unknown: The state of the connection is not available.
String region
The Amazon Web Services Region where the connection is located.
String location
The location of the connection.
String bandwidth
The bandwidth of the connection.
Integer vlan
The ID of the VLAN.
String partnerName
The name of the Direct Connect service provider associated with the connection.
Date loaIssueTime
The time of the most recent call to DescribeLoa for this connection.
String lagId
The ID of the LAG.
String awsDevice
The Direct Connect endpoint on which the physical connection terminates.
Boolean jumboFrameCapable
Indicates whether jumbo frames are supported.
String awsDeviceV2
The Direct Connect endpoint that terminates the physical connection.
String awsLogicalDeviceId
The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.
String hasLogicalRedundancy
Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).
SdkInternalList<T> tags
The tags associated with the connection.
String providerName
The name of the service provider associated with the connection.
Boolean macSecCapable
Indicates whether the connection supports MAC Security (MACsec).
String portEncryptionStatus
The MAC Security (MACsec) port link status of the connection.
The valid values are Encryption Up, which means that there is an active Connection Key Name, or
Encryption Down.
String encryptionMode
The MAC Security (MACsec) connection encryption mode.
The valid values are no_encrypt, should_encrypt, and must_encrypt.
SdkInternalList<T> macSecKeys
The MAC Security (MACsec) security keys associated with the connection.
String connectionId
The ID of the connection on which the private virtual interface is provisioned.
String ownerAccount
The ID of the Amazon Web Services account that owns the virtual private interface.
NewPrivateVirtualInterfaceAllocation newPrivateVirtualInterfaceAllocation
Information about the private virtual interface.
String ownerAccount
The ID of the Amazon Web Services account that owns the virtual interface.
String virtualInterfaceId
The ID of the virtual interface.
String location
The location of the connection.
String connectionId
The ID of the connection.
String virtualInterfaceType
The type of virtual interface. The possible values are private and public.
String virtualInterfaceName
The name of the virtual interface assigned by the customer network. The name has a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a hyphen (-).
Integer vlan
The ID of the VLAN.
Integer asn
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
The valid values are 1-2147483647.
Long amazonSideAsn
The autonomous system number (ASN) for the Amazon side of the connection.
String authKey
The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.
String amazonAddress
The IP address assigned to the Amazon interface.
String customerAddress
The IP address assigned to the customer interface.
String addressFamily
The address family for the BGP peer.
String virtualInterfaceState
The state of the virtual interface. The following are the possible values:
confirming: The creation of the virtual interface is pending confirmation from the virtual interface
owner. If the owner of the virtual interface is different from the owner of the connection on which it is
provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface
owner.
verifying: This state only applies to public virtual interfaces. Each public virtual interface needs
validation before the virtual interface can be created.
pending: A virtual interface is in this state from the time that it is created until the virtual
interface is ready to forward traffic.
available: A virtual interface that is able to forward traffic.
down: A virtual interface that is BGP down.
deleting: A virtual interface is in this state immediately after calling
DeleteVirtualInterface until it can no longer forward traffic.
deleted: A virtual interface that cannot forward traffic.
rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual
interface in the Confirming state is deleted by the virtual interface owner, the virtual interface
enters the Rejected state.
unknown: The state of the virtual interface is not available.
String customerRouterConfig
The customer router configuration.
Integer mtu
The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 8500. The default value is 1500
Boolean jumboFrameCapable
Indicates whether jumbo frames are supported.
String virtualGatewayId
The ID of the virtual private gateway. Applies only to private virtual interfaces.
String directConnectGatewayId
The ID of the Direct Connect gateway.
SdkInternalList<T> routeFilterPrefixes
The routes to be advertised to the Amazon Web Services network in this Region. Applies to public virtual interfaces.
SdkInternalList<T> bgpPeers
The BGP peers configured on this virtual interface.
String region
The Amazon Web Services Region where the virtual interface is located.
String awsDeviceV2
The Direct Connect endpoint that terminates the physical connection.
String awsLogicalDeviceId
The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.
SdkInternalList<T> tags
The tags associated with the virtual interface.
Boolean siteLinkEnabled
Indicates whether SiteLink is enabled.
String connectionId
The ID of the connection on which the public virtual interface is provisioned.
String ownerAccount
The ID of the Amazon Web Services account that owns the public virtual interface.
NewPublicVirtualInterfaceAllocation newPublicVirtualInterfaceAllocation
Information about the public virtual interface.
String ownerAccount
The ID of the Amazon Web Services account that owns the virtual interface.
String virtualInterfaceId
The ID of the virtual interface.
String location
The location of the connection.
String connectionId
The ID of the connection.
String virtualInterfaceType
The type of virtual interface. The possible values are private and public.
String virtualInterfaceName
The name of the virtual interface assigned by the customer network. The name has a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a hyphen (-).
Integer vlan
The ID of the VLAN.
Integer asn
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
The valid values are 1-2147483647.
Long amazonSideAsn
The autonomous system number (ASN) for the Amazon side of the connection.
String authKey
The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.
String amazonAddress
The IP address assigned to the Amazon interface.
String customerAddress
The IP address assigned to the customer interface.
String addressFamily
The address family for the BGP peer.
String virtualInterfaceState
The state of the virtual interface. The following are the possible values:
confirming: The creation of the virtual interface is pending confirmation from the virtual interface
owner. If the owner of the virtual interface is different from the owner of the connection on which it is
provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface
owner.
verifying: This state only applies to public virtual interfaces. Each public virtual interface needs
validation before the virtual interface can be created.
pending: A virtual interface is in this state from the time that it is created until the virtual
interface is ready to forward traffic.
available: A virtual interface that is able to forward traffic.
down: A virtual interface that is BGP down.
deleting: A virtual interface is in this state immediately after calling
DeleteVirtualInterface until it can no longer forward traffic.
deleted: A virtual interface that cannot forward traffic.
rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual
interface in the Confirming state is deleted by the virtual interface owner, the virtual interface
enters the Rejected state.
unknown: The state of the virtual interface is not available.
String customerRouterConfig
The customer router configuration.
Integer mtu
The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 8500. The default value is 1500
Boolean jumboFrameCapable
Indicates whether jumbo frames are supported.
String virtualGatewayId
The ID of the virtual private gateway. Applies only to private virtual interfaces.
String directConnectGatewayId
The ID of the Direct Connect gateway.
SdkInternalList<T> routeFilterPrefixes
The routes to be advertised to the Amazon Web Services network in this Region. Applies to public virtual interfaces.
SdkInternalList<T> bgpPeers
The BGP peers configured on this virtual interface.
String region
The Amazon Web Services Region where the virtual interface is located.
String awsDeviceV2
The Direct Connect endpoint that terminates the physical connection.
String awsLogicalDeviceId
The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.
SdkInternalList<T> tags
The tags associated with the virtual interface.
Boolean siteLinkEnabled
Indicates whether SiteLink is enabled.
String connectionId
The ID of the connection on which the transit virtual interface is provisioned.
String ownerAccount
The ID of the Amazon Web Services account that owns the transit virtual interface.
NewTransitVirtualInterfaceAllocation newTransitVirtualInterfaceAllocation
Information about the transit virtual interface.
VirtualInterface virtualInterface
String ownerAccount
The ID of the Amazon Web Services account that owns the connection.
String connectionId
The ID of the connection.
String connectionName
The name of the connection.
String connectionState
The state of the connection. The following are the possible values:
ordering: The initial state of a hosted connection provisioned on an interconnect. The connection
stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
requested: The initial state of a standard connection. The connection stays in the requested state
until the Letter of Authorization (LOA) is sent to the customer.
pending: The connection has been approved and is being initialized.
available: The network link is up and the connection is ready for use.
down: The network link is down.
deleting: The connection is being deleted.
deleted: The connection has been deleted.
rejected: A hosted connection in the ordering state enters the rejected
state if it is deleted by the customer.
unknown: The state of the connection is not available.
String region
The Amazon Web Services Region where the connection is located.
String location
The location of the connection.
String bandwidth
The bandwidth of the connection.
Integer vlan
The ID of the VLAN.
String partnerName
The name of the Direct Connect service provider associated with the connection.
Date loaIssueTime
The time of the most recent call to DescribeLoa for this connection.
String lagId
The ID of the LAG.
String awsDevice
The Direct Connect endpoint on which the physical connection terminates.
Boolean jumboFrameCapable
Indicates whether jumbo frames are supported.
String awsDeviceV2
The Direct Connect endpoint that terminates the physical connection.
String awsLogicalDeviceId
The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.
String hasLogicalRedundancy
Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).
SdkInternalList<T> tags
The tags associated with the connection.
String providerName
The name of the service provider associated with the connection.
Boolean macSecCapable
Indicates whether the connection supports MAC Security (MACsec).
String portEncryptionStatus
The MAC Security (MACsec) port link status of the connection.
The valid values are Encryption Up, which means that there is an active Connection Key Name, or
Encryption Down.
String encryptionMode
The MAC Security (MACsec) connection encryption mode.
The valid values are no_encrypt, should_encrypt, and must_encrypt.
SdkInternalList<T> macSecKeys
The MAC Security (MACsec) security keys associated with the connection.
String id
The ID of the associated gateway.
String type
The type of associated gateway.
String ownerAccount
The ID of the Amazon Web Services account that owns the associated virtual private gateway or transit gateway.
String region
The Region where the associated gateway is located.
String ownerAccount
The ID of the Amazon Web Services account that owns the connection.
String connectionId
The ID of the connection.
String connectionName
The name of the connection.
String connectionState
The state of the connection. The following are the possible values:
ordering: The initial state of a hosted connection provisioned on an interconnect. The connection
stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
requested: The initial state of a standard connection. The connection stays in the requested state
until the Letter of Authorization (LOA) is sent to the customer.
pending: The connection has been approved and is being initialized.
available: The network link is up and the connection is ready for use.
down: The network link is down.
deleting: The connection is being deleted.
deleted: The connection has been deleted.
rejected: A hosted connection in the ordering state enters the rejected
state if it is deleted by the customer.
unknown: The state of the connection is not available.
String region
The Amazon Web Services Region where the connection is located.
String location
The location of the connection.
String bandwidth
The bandwidth of the connection.
Integer vlan
The ID of the VLAN.
String partnerName
The name of the Direct Connect service provider associated with the connection.
Date loaIssueTime
The time of the most recent call to DescribeLoa for this connection.
String lagId
The ID of the LAG.
String awsDevice
The Direct Connect endpoint on which the physical connection terminates.
Boolean jumboFrameCapable
Indicates whether jumbo frames are supported.
String awsDeviceV2
The Direct Connect endpoint that terminates the physical connection.
String awsLogicalDeviceId
The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.
String hasLogicalRedundancy
Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).
SdkInternalList<T> tags
The tags associated with the connection.
String providerName
The name of the service provider associated with the connection.
Boolean macSecCapable
Indicates whether the connection supports MAC Security (MACsec).
String portEncryptionStatus
The MAC Security (MACsec) port link status of the connection.
The valid values are Encryption Up, which means that there is an active Connection Key Name, or
Encryption Down.
String encryptionMode
The MAC Security (MACsec) connection encryption mode.
The valid values are no_encrypt, should_encrypt, and must_encrypt.
SdkInternalList<T> macSecKeys
The MAC Security (MACsec) security keys associated with the connection.
String connectionId
The ID of the dedicated connection (dxcon-xxxx), or the ID of the LAG (dxlag-xxxx).
You can use DescribeConnections or DescribeLags to retrieve connection ID.
String secretARN
The Amazon Resource Name (ARN) of the MAC Security (MACsec) secret key to associate with the dedicated connection.
You can use DescribeConnections or DescribeLags to retrieve the MAC Security (MACsec) secret key.
If you use this request parameter, you do not use the ckn and cak request parameters.
String ckn
The MAC Security (MACsec) CKN to associate with the dedicated connection.
You can create the CKN/CAK pair using an industry standard tool.
The valid values are 64 hexadecimal characters (0-9, A-E).
If you use this request parameter, you must use the cak request parameter and not use the
secretARN request parameter.
String cak
The MAC Security (MACsec) CAK to associate with the dedicated connection.
You can create the CKN/CAK pair using an industry standard tool.
The valid values are 64 hexadecimal characters (0-9, A-E).
If you use this request parameter, you must use the ckn request parameter and not use the
secretARN request parameter.
String connectionId
The ID of the dedicated connection (dxcon-xxxx), or the ID of the LAG (dxlag-xxxx).
SdkInternalList<T> macSecKeys
The MAC Security (MACsec) security keys associated with the dedicated connection.
String ownerAccount
The ID of the Amazon Web Services account that owns the virtual interface.
String virtualInterfaceId
The ID of the virtual interface.
String location
The location of the connection.
String connectionId
The ID of the connection.
String virtualInterfaceType
The type of virtual interface. The possible values are private and public.
String virtualInterfaceName
The name of the virtual interface assigned by the customer network. The name has a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a hyphen (-).
Integer vlan
The ID of the VLAN.
Integer asn
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
The valid values are 1-2147483647.
Long amazonSideAsn
The autonomous system number (ASN) for the Amazon side of the connection.
String authKey
The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.
String amazonAddress
The IP address assigned to the Amazon interface.
String customerAddress
The IP address assigned to the customer interface.
String addressFamily
The address family for the BGP peer.
String virtualInterfaceState
The state of the virtual interface. The following are the possible values:
confirming: The creation of the virtual interface is pending confirmation from the virtual interface
owner. If the owner of the virtual interface is different from the owner of the connection on which it is
provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface
owner.
verifying: This state only applies to public virtual interfaces. Each public virtual interface needs
validation before the virtual interface can be created.
pending: A virtual interface is in this state from the time that it is created until the virtual
interface is ready to forward traffic.
available: A virtual interface that is able to forward traffic.
down: A virtual interface that is BGP down.
deleting: A virtual interface is in this state immediately after calling
DeleteVirtualInterface until it can no longer forward traffic.
deleted: A virtual interface that cannot forward traffic.
rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual
interface in the Confirming state is deleted by the virtual interface owner, the virtual interface
enters the Rejected state.
unknown: The state of the virtual interface is not available.
String customerRouterConfig
The customer router configuration.
Integer mtu
The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 8500. The default value is 1500
Boolean jumboFrameCapable
Indicates whether jumbo frames are supported.
String virtualGatewayId
The ID of the virtual private gateway. Applies only to private virtual interfaces.
String directConnectGatewayId
The ID of the Direct Connect gateway.
SdkInternalList<T> routeFilterPrefixes
The routes to be advertised to the Amazon Web Services network in this Region. Applies to public virtual interfaces.
SdkInternalList<T> bgpPeers
The BGP peers configured on this virtual interface.
String region
The Amazon Web Services Region where the virtual interface is located.
String awsDeviceV2
The Direct Connect endpoint that terminates the physical connection.
String awsLogicalDeviceId
The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.
SdkInternalList<T> tags
The tags associated with the virtual interface.
Boolean siteLinkEnabled
Indicates whether SiteLink is enabled.
String bgpPeerId
The ID of the BGP peer.
Integer asn
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
String authKey
The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.
String addressFamily
The address family for the BGP peer.
String amazonAddress
The IP address assigned to the Amazon interface.
String customerAddress
The IP address assigned to the customer interface.
String bgpPeerState
The state of the BGP peer. The following are the possible values:
verifying: The BGP peering addresses or ASN require validation before the BGP peer can be created.
This state applies only to public virtual interfaces.
pending: The BGP peer is created, and remains in this state until it is ready to be established.
available: The BGP peer is ready to be established.
deleting: The BGP peer is being deleted.
deleted: The BGP peer is deleted and cannot be established.
String bgpStatus
The status of the BGP peer. The following are the possible values:
up: The BGP peer is established. This state does not indicate the state of the routing function.
Ensure that you are receiving routes over the BGP session.
down: The BGP peer is down.
unknown: The BGP peer status is not available.
String awsDeviceV2
The Direct Connect endpoint that terminates the BGP peer.
String awsLogicalDeviceId
The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.
String connectionId
The ID of the hosted connection.
String connectionState
The state of the connection. The following are the possible values:
ordering: The initial state of a hosted connection provisioned on an interconnect. The connection
stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
requested: The initial state of a standard connection. The connection stays in the requested state
until the Letter of Authorization (LOA) is sent to the customer.
pending: The connection has been approved and is being initialized.
available: The network link is up and the connection is ready for use.
down: The network link is down.
deleting: The connection is being deleted.
deleted: The connection has been deleted.
rejected: A hosted connection in the ordering state enters the rejected
state if it is deleted by the customer.
unknown: The state of the connection is not available.
String agreementName
The name of the customer agreement.
String status
The status of the customer agreement when the connection was created. This will be either signed or
unsigned.
String virtualInterfaceState
The state of the virtual interface. The following are the possible values:
confirming: The creation of the virtual interface is pending confirmation from the virtual interface
owner. If the owner of the virtual interface is different from the owner of the connection on which it is
provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface
owner.
verifying: This state only applies to public virtual interfaces. Each public virtual interface needs
validation before the virtual interface can be created.
pending: A virtual interface is in this state from the time that it is created until the virtual
interface is ready to forward traffic.
available: A virtual interface that is able to forward traffic.
down: A virtual interface that is BGP down.
deleting: A virtual interface is in this state immediately after calling
DeleteVirtualInterface until it can no longer forward traffic.
deleted: A virtual interface that cannot forward traffic.
rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual
interface in the Confirming state is deleted by the virtual interface owner, the virtual interface
enters the Rejected state.
unknown: The state of the virtual interface is not available.
String virtualInterfaceId
The ID of the virtual interface.
String virtualInterfaceState
The state of the virtual interface. The following are the possible values:
confirming: The creation of the virtual interface is pending confirmation from the virtual interface
owner. If the owner of the virtual interface is different from the owner of the connection on which it is
provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface
owner.
verifying: This state only applies to public virtual interfaces. Each public virtual interface needs
validation before the virtual interface can be created.
pending: A virtual interface is in this state from the time that it is created until the virtual
interface is ready to forward traffic.
available: A virtual interface that is able to forward traffic.
down: A virtual interface that is BGP down.
deleting: A virtual interface is in this state immediately after calling
DeleteVirtualInterface until it can no longer forward traffic.
deleted: A virtual interface that cannot forward traffic.
rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual
interface in the Confirming state is deleted by the virtual interface owner, the virtual interface
enters the Rejected state.
unknown: The state of the virtual interface is not available.
String virtualInterfaceState
The state of the virtual interface. The following are the possible values:
confirming: The creation of the virtual interface is pending confirmation from the virtual interface
owner. If the owner of the virtual interface is different from the owner of the connection on which it is
provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface
owner.
verifying: This state only applies to public virtual interfaces. Each public virtual interface needs
validation before the virtual interface can be created.
pending: A virtual interface is in this state from the time that it is created until the virtual
interface is ready to forward traffic.
available: A virtual interface that is able to forward traffic.
down: A virtual interface that is BGP down.
deleting: A virtual interface is in this state immediately after calling
DeleteVirtualInterface until it can no longer forward traffic.
deleted: A virtual interface that cannot forward traffic.
rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual
interface in the Confirming state is deleted by the virtual interface owner, the virtual interface
enters the Rejected state.
unknown: The state of the virtual interface is not available.
String ownerAccount
The ID of the Amazon Web Services account that owns the connection.
String connectionId
The ID of the connection.
String connectionName
The name of the connection.
String connectionState
The state of the connection. The following are the possible values:
ordering: The initial state of a hosted connection provisioned on an interconnect. The connection
stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
requested: The initial state of a standard connection. The connection stays in the requested state
until the Letter of Authorization (LOA) is sent to the customer.
pending: The connection has been approved and is being initialized.
available: The network link is up and the connection is ready for use.
down: The network link is down.
deleting: The connection is being deleted.
deleted: The connection has been deleted.
rejected: A hosted connection in the ordering state enters the rejected
state if it is deleted by the customer.
unknown: The state of the connection is not available.
String region
The Amazon Web Services Region where the connection is located.
String location
The location of the connection.
String bandwidth
The bandwidth of the connection.
Integer vlan
The ID of the VLAN.
String partnerName
The name of the Direct Connect service provider associated with the connection.
Date loaIssueTime
The time of the most recent call to DescribeLoa for this connection.
String lagId
The ID of the LAG.
String awsDevice
The Direct Connect endpoint on which the physical connection terminates.
Boolean jumboFrameCapable
Indicates whether jumbo frames are supported.
String awsDeviceV2
The Direct Connect endpoint that terminates the physical connection.
String awsLogicalDeviceId
The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.
String hasLogicalRedundancy
Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).
SdkInternalList<T> tags
The tags associated with the connection.
String providerName
The name of the service provider associated with the connection.
Boolean macSecCapable
Indicates whether the connection supports MAC Security (MACsec).
String portEncryptionStatus
The MAC Security (MACsec) port link status of the connection.
The valid values are Encryption Up, which means that there is an active Connection Key Name, or
Encryption Down.
String encryptionMode
The MAC Security (MACsec) connection encryption mode.
The valid values are no_encrypt, should_encrypt, and must_encrypt.
SdkInternalList<T> macSecKeys
The MAC Security (MACsec) security keys associated with the connection.
String virtualInterfaceId
The ID of the virtual interface.
NewBGPPeer newBGPPeer
Information about the BGP peer.
VirtualInterface virtualInterface
The virtual interface.
String location
The location of the connection.
String bandwidth
The bandwidth of the connection.
String connectionName
The name of the connection.
String lagId
The ID of the LAG.
SdkInternalList<T> tags
The tags to associate with the lag.
String providerName
The name of the service provider associated with the requested connection.
Boolean requestMACSec
Indicates whether you want the connection to support MAC Security (MACsec).
MAC Security (MACsec) is only available on dedicated connections. For information about MAC Security (MACsec) prerequisties, see MACsec prerequisties in the Direct Connect User Guide.
String ownerAccount
The ID of the Amazon Web Services account that owns the connection.
String connectionId
The ID of the connection.
String connectionName
The name of the connection.
String connectionState
The state of the connection. The following are the possible values:
ordering: The initial state of a hosted connection provisioned on an interconnect. The connection
stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
requested: The initial state of a standard connection. The connection stays in the requested state
until the Letter of Authorization (LOA) is sent to the customer.
pending: The connection has been approved and is being initialized.
available: The network link is up and the connection is ready for use.
down: The network link is down.
deleting: The connection is being deleted.
deleted: The connection has been deleted.
rejected: A hosted connection in the ordering state enters the rejected
state if it is deleted by the customer.
unknown: The state of the connection is not available.
String region
The Amazon Web Services Region where the connection is located.
String location
The location of the connection.
String bandwidth
The bandwidth of the connection.
Integer vlan
The ID of the VLAN.
String partnerName
The name of the Direct Connect service provider associated with the connection.
Date loaIssueTime
The time of the most recent call to DescribeLoa for this connection.
String lagId
The ID of the LAG.
String awsDevice
The Direct Connect endpoint on which the physical connection terminates.
Boolean jumboFrameCapable
Indicates whether jumbo frames are supported.
String awsDeviceV2
The Direct Connect endpoint that terminates the physical connection.
String awsLogicalDeviceId
The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.
String hasLogicalRedundancy
Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).
SdkInternalList<T> tags
The tags associated with the connection.
String providerName
The name of the service provider associated with the connection.
Boolean macSecCapable
Indicates whether the connection supports MAC Security (MACsec).
String portEncryptionStatus
The MAC Security (MACsec) port link status of the connection.
The valid values are Encryption Up, which means that there is an active Connection Key Name, or
Encryption Down.
String encryptionMode
The MAC Security (MACsec) connection encryption mode.
The valid values are no_encrypt, should_encrypt, and must_encrypt.
SdkInternalList<T> macSecKeys
The MAC Security (MACsec) security keys associated with the connection.
String directConnectGatewayId
The ID of the Direct Connect gateway.
String directConnectGatewayOwnerAccount
The ID of the Amazon Web Services account that owns the Direct Connect gateway.
String gatewayId
The ID of the virtual private gateway or transit gateway.
SdkInternalList<T> addAllowedPrefixesToDirectConnectGateway
The Amazon VPC prefixes to advertise to the Direct Connect gateway.
SdkInternalList<T> removeAllowedPrefixesToDirectConnectGateway
The Amazon VPC prefixes to no longer advertise to the Direct Connect gateway.
DirectConnectGatewayAssociationProposal directConnectGatewayAssociationProposal
Information about the Direct Connect gateway proposal.
String directConnectGatewayId
The ID of the Direct Connect gateway.
String gatewayId
The ID of the virtual private gateway or transit gateway.
SdkInternalList<T> addAllowedPrefixesToDirectConnectGateway
The Amazon VPC prefixes to advertise to the Direct Connect gateway
This parameter is required when you create an association to a transit gateway.
For information about how to set the prefixes, see Allowed Prefixes in the Direct Connect User Guide.
String virtualGatewayId
The ID of the virtual private gateway.
DirectConnectGatewayAssociation directConnectGatewayAssociation
The association to be created.
String directConnectGatewayName
The name of the Direct Connect gateway.
Long amazonSideAsn
The autonomous system number (ASN) for Border Gateway Protocol (BGP) to be configured on the Amazon side of the connection. The ASN must be in the private range of 64,512 to 65,534 or 4,200,000,000 to 4,294,967,294. The default is 64512.
DirectConnectGateway directConnectGateway
The Direct Connect gateway.
String interconnectName
The name of the interconnect.
String bandwidth
The port bandwidth, in Gbps. The possible values are 1 and 10.
String location
The location of the interconnect.
String lagId
The ID of the LAG.
SdkInternalList<T> tags
The tags to associate with the interconnect.
String providerName
The name of the service provider associated with the interconnect.
String interconnectId
The ID of the interconnect.
String interconnectName
The name of the interconnect.
String interconnectState
The state of the interconnect. The following are the possible values:
requested: The initial state of an interconnect. The interconnect stays in the requested state until
the Letter of Authorization (LOA) is sent to the customer.
pending: The interconnect is approved, and is being initialized.
available: The network link is up, and the interconnect is ready for use.
down: The network link is down.
deleting: The interconnect is being deleted.
deleted: The interconnect is deleted.
unknown: The state of the interconnect is not available.
String region
The Amazon Web Services Region where the connection is located.
String location
The location of the connection.
String bandwidth
The bandwidth of the connection.
Date loaIssueTime
The time of the most recent call to DescribeLoa for this connection.
String lagId
The ID of the LAG.
String awsDevice
The Direct Connect endpoint on which the physical connection terminates.
Boolean jumboFrameCapable
Indicates whether jumbo frames are supported.
String awsDeviceV2
The Direct Connect endpoint that terminates the physical connection.
String awsLogicalDeviceId
The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.
String hasLogicalRedundancy
Indicates whether the interconnect supports a secondary BGP in the same address family (IPv4/IPv6).
SdkInternalList<T> tags
The tags associated with the interconnect.
String providerName
The name of the service provider associated with the interconnect.
Integer numberOfConnections
The number of physical dedicated connections initially provisioned and bundled by the LAG. You can have a maximum of four connections when the port speed is 1G or 10G, or two when the port speed is 100G.
String location
The location for the LAG.
String connectionsBandwidth
The bandwidth of the individual physical dedicated connections bundled by the LAG. The possible values are 1Gbps and 10Gbps.
String lagName
The name of the LAG.
String connectionId
The ID of an existing dedicated connection to migrate to the LAG.
SdkInternalList<T> tags
The tags to associate with the LAG.
SdkInternalList<T> childConnectionTags
The tags to associate with the automtically created LAGs.
String providerName
The name of the service provider associated with the LAG.
Boolean requestMACSec
Indicates whether the connection will support MAC Security (MACsec).
All connections in the LAG must be capable of supporting MAC Security (MACsec). For information about MAC Security (MACsec) prerequisties, see MACsec prerequisties in the Direct Connect User Guide.
String connectionsBandwidth
The individual bandwidth of the physical connections bundled by the LAG. The possible values are 1Gbps and 10Gbps.
Integer numberOfConnections
The number of physical dedicated connections bundled by the LAG, up to a maximum of 10.
String lagId
The ID of the LAG.
String ownerAccount
The ID of the Amazon Web Services account that owns the LAG.
String lagName
The name of the LAG.
String lagState
The state of the LAG. The following are the possible values:
requested: The initial state of a LAG. The LAG stays in the requested state until the Letter of
Authorization (LOA) is available.
pending: The LAG has been approved and is being initialized.
available: The network link is established and the LAG is ready for use.
down: The network link is down.
deleting: The LAG is being deleted.
deleted: The LAG is deleted.
unknown: The state of the LAG is not available.
String location
The location of the LAG.
String region
The Amazon Web Services Region where the connection is located.
Integer minimumLinks
The minimum number of physical dedicated connections that must be operational for the LAG itself to be operational.
String awsDevice
The Direct Connect endpoint that hosts the LAG.
String awsDeviceV2
The Direct Connect endpoint that hosts the LAG.
String awsLogicalDeviceId
The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.
SdkInternalList<T> connections
The connections bundled by the LAG.
Boolean allowsHostedConnections
Indicates whether the LAG can host other connections.
Boolean jumboFrameCapable
Indicates whether jumbo frames are supported.
String hasLogicalRedundancy
Indicates whether the LAG supports a secondary BGP peer in the same address family (IPv4/IPv6).
SdkInternalList<T> tags
The tags associated with the LAG.
String providerName
The name of the service provider associated with the LAG.
Boolean macSecCapable
Indicates whether the LAG supports MAC Security (MACsec).
String encryptionMode
The LAG MAC Security (MACsec) encryption mode.
The valid values are no_encrypt, should_encrypt, and must_encrypt.
SdkInternalList<T> macSecKeys
The MAC Security (MACsec) security keys associated with the LAG.
String connectionId
The ID of the connection.
NewPrivateVirtualInterface newPrivateVirtualInterface
Information about the private virtual interface.
String ownerAccount
The ID of the Amazon Web Services account that owns the virtual interface.
String virtualInterfaceId
The ID of the virtual interface.
String location
The location of the connection.
String connectionId
The ID of the connection.
String virtualInterfaceType
The type of virtual interface. The possible values are private and public.
String virtualInterfaceName
The name of the virtual interface assigned by the customer network. The name has a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a hyphen (-).
Integer vlan
The ID of the VLAN.
Integer asn
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
The valid values are 1-2147483647.
Long amazonSideAsn
The autonomous system number (ASN) for the Amazon side of the connection.
String authKey
The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.
String amazonAddress
The IP address assigned to the Amazon interface.
String customerAddress
The IP address assigned to the customer interface.
String addressFamily
The address family for the BGP peer.
String virtualInterfaceState
The state of the virtual interface. The following are the possible values:
confirming: The creation of the virtual interface is pending confirmation from the virtual interface
owner. If the owner of the virtual interface is different from the owner of the connection on which it is
provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface
owner.
verifying: This state only applies to public virtual interfaces. Each public virtual interface needs
validation before the virtual interface can be created.
pending: A virtual interface is in this state from the time that it is created until the virtual
interface is ready to forward traffic.
available: A virtual interface that is able to forward traffic.
down: A virtual interface that is BGP down.
deleting: A virtual interface is in this state immediately after calling
DeleteVirtualInterface until it can no longer forward traffic.
deleted: A virtual interface that cannot forward traffic.
rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual
interface in the Confirming state is deleted by the virtual interface owner, the virtual interface
enters the Rejected state.
unknown: The state of the virtual interface is not available.
String customerRouterConfig
The customer router configuration.
Integer mtu
The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 8500. The default value is 1500
Boolean jumboFrameCapable
Indicates whether jumbo frames are supported.
String virtualGatewayId
The ID of the virtual private gateway. Applies only to private virtual interfaces.
String directConnectGatewayId
The ID of the Direct Connect gateway.
SdkInternalList<T> routeFilterPrefixes
The routes to be advertised to the Amazon Web Services network in this Region. Applies to public virtual interfaces.
SdkInternalList<T> bgpPeers
The BGP peers configured on this virtual interface.
String region
The Amazon Web Services Region where the virtual interface is located.
String awsDeviceV2
The Direct Connect endpoint that terminates the physical connection.
String awsLogicalDeviceId
The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.
SdkInternalList<T> tags
The tags associated with the virtual interface.
Boolean siteLinkEnabled
Indicates whether SiteLink is enabled.
String connectionId
The ID of the connection.
NewPublicVirtualInterface newPublicVirtualInterface
Information about the public virtual interface.
String ownerAccount
The ID of the Amazon Web Services account that owns the virtual interface.
String virtualInterfaceId
The ID of the virtual interface.
String location
The location of the connection.
String connectionId
The ID of the connection.
String virtualInterfaceType
The type of virtual interface. The possible values are private and public.
String virtualInterfaceName
The name of the virtual interface assigned by the customer network. The name has a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a hyphen (-).
Integer vlan
The ID of the VLAN.
Integer asn
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
The valid values are 1-2147483647.
Long amazonSideAsn
The autonomous system number (ASN) for the Amazon side of the connection.
String authKey
The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.
String amazonAddress
The IP address assigned to the Amazon interface.
String customerAddress
The IP address assigned to the customer interface.
String addressFamily
The address family for the BGP peer.
String virtualInterfaceState
The state of the virtual interface. The following are the possible values:
confirming: The creation of the virtual interface is pending confirmation from the virtual interface
owner. If the owner of the virtual interface is different from the owner of the connection on which it is
provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface
owner.
verifying: This state only applies to public virtual interfaces. Each public virtual interface needs
validation before the virtual interface can be created.
pending: A virtual interface is in this state from the time that it is created until the virtual
interface is ready to forward traffic.
available: A virtual interface that is able to forward traffic.
down: A virtual interface that is BGP down.
deleting: A virtual interface is in this state immediately after calling
DeleteVirtualInterface until it can no longer forward traffic.
deleted: A virtual interface that cannot forward traffic.
rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual
interface in the Confirming state is deleted by the virtual interface owner, the virtual interface
enters the Rejected state.
unknown: The state of the virtual interface is not available.
String customerRouterConfig
The customer router configuration.
Integer mtu
The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 8500. The default value is 1500
Boolean jumboFrameCapable
Indicates whether jumbo frames are supported.
String virtualGatewayId
The ID of the virtual private gateway. Applies only to private virtual interfaces.
String directConnectGatewayId
The ID of the Direct Connect gateway.
SdkInternalList<T> routeFilterPrefixes
The routes to be advertised to the Amazon Web Services network in this Region. Applies to public virtual interfaces.
SdkInternalList<T> bgpPeers
The BGP peers configured on this virtual interface.
String region
The Amazon Web Services Region where the virtual interface is located.
String awsDeviceV2
The Direct Connect endpoint that terminates the physical connection.
String awsLogicalDeviceId
The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.
SdkInternalList<T> tags
The tags associated with the virtual interface.
Boolean siteLinkEnabled
Indicates whether SiteLink is enabled.
String connectionId
The ID of the connection.
NewTransitVirtualInterface newTransitVirtualInterface
Information about the transit virtual interface.
VirtualInterface virtualInterface
String virtualInterfaceId
The ID of the virtual interface.
Integer asn
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
String customerAddress
The IP address assigned to the customer interface.
String bgpPeerId
The ID of the BGP peer.
VirtualInterface virtualInterface
The virtual interface.
String connectionId
The ID of the connection.
String ownerAccount
The ID of the Amazon Web Services account that owns the connection.
String connectionId
The ID of the connection.
String connectionName
The name of the connection.
String connectionState
The state of the connection. The following are the possible values:
ordering: The initial state of a hosted connection provisioned on an interconnect. The connection
stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
requested: The initial state of a standard connection. The connection stays in the requested state
until the Letter of Authorization (LOA) is sent to the customer.
pending: The connection has been approved and is being initialized.
available: The network link is up and the connection is ready for use.
down: The network link is down.
deleting: The connection is being deleted.
deleted: The connection has been deleted.
rejected: A hosted connection in the ordering state enters the rejected
state if it is deleted by the customer.
unknown: The state of the connection is not available.
String region
The Amazon Web Services Region where the connection is located.
String location
The location of the connection.
String bandwidth
The bandwidth of the connection.
Integer vlan
The ID of the VLAN.
String partnerName
The name of the Direct Connect service provider associated with the connection.
Date loaIssueTime
The time of the most recent call to DescribeLoa for this connection.
String lagId
The ID of the LAG.
String awsDevice
The Direct Connect endpoint on which the physical connection terminates.
Boolean jumboFrameCapable
Indicates whether jumbo frames are supported.
String awsDeviceV2
The Direct Connect endpoint that terminates the physical connection.
String awsLogicalDeviceId
The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.
String hasLogicalRedundancy
Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).
SdkInternalList<T> tags
The tags associated with the connection.
String providerName
The name of the service provider associated with the connection.
Boolean macSecCapable
Indicates whether the connection supports MAC Security (MACsec).
String portEncryptionStatus
The MAC Security (MACsec) port link status of the connection.
The valid values are Encryption Up, which means that there is an active Connection Key Name, or
Encryption Down.
String encryptionMode
The MAC Security (MACsec) connection encryption mode.
The valid values are no_encrypt, should_encrypt, and must_encrypt.
SdkInternalList<T> macSecKeys
The MAC Security (MACsec) security keys associated with the connection.
String proposalId
The ID of the proposal.
DirectConnectGatewayAssociationProposal directConnectGatewayAssociationProposal
The ID of the associated gateway.
DirectConnectGatewayAssociation directConnectGatewayAssociation
Information about the deleted association.
String directConnectGatewayId
The ID of the Direct Connect gateway.
DirectConnectGateway directConnectGateway
The Direct Connect gateway.
String interconnectId
The ID of the interconnect.
String interconnectState
The state of the interconnect. The following are the possible values:
requested: The initial state of an interconnect. The interconnect stays in the requested state until
the Letter of Authorization (LOA) is sent to the customer.
pending: The interconnect is approved, and is being initialized.
available: The network link is up, and the interconnect is ready for use.
down: The network link is down.
deleting: The interconnect is being deleted.
deleted: The interconnect is deleted.
unknown: The state of the interconnect is not available.
String lagId
The ID of the LAG.
String connectionsBandwidth
The individual bandwidth of the physical connections bundled by the LAG. The possible values are 1Gbps and 10Gbps.
Integer numberOfConnections
The number of physical dedicated connections bundled by the LAG, up to a maximum of 10.
String lagId
The ID of the LAG.
String ownerAccount
The ID of the Amazon Web Services account that owns the LAG.
String lagName
The name of the LAG.
String lagState
The state of the LAG. The following are the possible values:
requested: The initial state of a LAG. The LAG stays in the requested state until the Letter of
Authorization (LOA) is available.
pending: The LAG has been approved and is being initialized.
available: The network link is established and the LAG is ready for use.
down: The network link is down.
deleting: The LAG is being deleted.
deleted: The LAG is deleted.
unknown: The state of the LAG is not available.
String location
The location of the LAG.
String region
The Amazon Web Services Region where the connection is located.
Integer minimumLinks
The minimum number of physical dedicated connections that must be operational for the LAG itself to be operational.
String awsDevice
The Direct Connect endpoint that hosts the LAG.
String awsDeviceV2
The Direct Connect endpoint that hosts the LAG.
String awsLogicalDeviceId
The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.
SdkInternalList<T> connections
The connections bundled by the LAG.
Boolean allowsHostedConnections
Indicates whether the LAG can host other connections.
Boolean jumboFrameCapable
Indicates whether jumbo frames are supported.
String hasLogicalRedundancy
Indicates whether the LAG supports a secondary BGP peer in the same address family (IPv4/IPv6).
SdkInternalList<T> tags
The tags associated with the LAG.
String providerName
The name of the service provider associated with the LAG.
Boolean macSecCapable
Indicates whether the LAG supports MAC Security (MACsec).
String encryptionMode
The LAG MAC Security (MACsec) encryption mode.
The valid values are no_encrypt, should_encrypt, and must_encrypt.
SdkInternalList<T> macSecKeys
The MAC Security (MACsec) security keys associated with the LAG.
String virtualInterfaceId
The ID of the virtual interface.
String virtualInterfaceState
The state of the virtual interface. The following are the possible values:
confirming: The creation of the virtual interface is pending confirmation from the virtual interface
owner. If the owner of the virtual interface is different from the owner of the connection on which it is
provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface
owner.
verifying: This state only applies to public virtual interfaces. Each public virtual interface needs
validation before the virtual interface can be created.
pending: A virtual interface is in this state from the time that it is created until the virtual
interface is ready to forward traffic.
available: A virtual interface that is able to forward traffic.
down: A virtual interface that is BGP down.
deleting: A virtual interface is in this state immediately after calling
DeleteVirtualInterface until it can no longer forward traffic.
deleted: A virtual interface that cannot forward traffic.
rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual
interface in the Confirming state is deleted by the virtual interface owner, the virtual interface
enters the Rejected state.
unknown: The state of the virtual interface is not available.
String connectionId
The ID of the connection.
String providerName
The name of the APN partner or service provider who establishes connectivity on your behalf. If you specify this parameter, the LOA-CFA lists the provider name alongside your company name as the requester of the cross connect.
String loaContentType
The standard media type for the LOA-CFA document. The only supported value is application/pdf.
Loa loa
The Letter of Authorization - Connecting Facility Assignment (LOA-CFA).
String interconnectId
The ID of the interconnect.
SdkInternalList<T> connections
The connections.
String connectionId
The ID of the connection.
SdkInternalList<T> connections
The connections.
SdkInternalList<T> agreements
The list of customer agreements.
String nniPartnerType
The type of network-to-network interface (NNI) partner. The partner type will be one of the following:
V1: This partner can only allocate 50Mbps, 100Mbps, 200Mbps, 300Mbps, 400Mbps, or 500Mbps subgigabit connections.
V2: This partner can only allocate 1GB, 2GB, 5GB, or 10GB hosted connections.
nonPartner: The customer is not a partner.
String directConnectGatewayId
The ID of the Direct Connect gateway.
String proposalId
The ID of the proposal.
String associatedGatewayId
The ID of the associated gateway.
Integer maxResults
The maximum number of results to return with a single call. To retrieve the remaining results, make another call
with the returned nextToken value.
If MaxResults is given a value larger than 100, only 100 results are returned.
String nextToken
The token for the next page of results.
SdkInternalList<T> directConnectGatewayAssociationProposals
Describes the Direct Connect gateway association proposals.
String nextToken
The token to use to retrieve the next page of results. This value is null when there are no more
results to return.
String associationId
The ID of the Direct Connect gateway association.
String associatedGatewayId
The ID of the associated gateway.
String directConnectGatewayId
The ID of the Direct Connect gateway.
Integer maxResults
The maximum number of results to return with a single call. To retrieve the remaining results, make another call
with the returned nextToken value.
If MaxResults is given a value larger than 100, only 100 results are returned.
String nextToken
The token provided in the previous call to retrieve the next page.
String virtualGatewayId
The ID of the virtual private gateway or transit gateway.
SdkInternalList<T> directConnectGatewayAssociations
Information about the associations.
String nextToken
The token to retrieve the next page.
String directConnectGatewayId
The ID of the Direct Connect gateway.
String virtualInterfaceId
The ID of the virtual interface.
Integer maxResults
The maximum number of results to return with a single call. To retrieve the remaining results, make another call
with the returned nextToken value.
If MaxResults is given a value larger than 100, only 100 results are returned.
String nextToken
The token provided in the previous call to retrieve the next page.
SdkInternalList<T> directConnectGatewayAttachments
The attachments.
String nextToken
The token to retrieve the next page.
String directConnectGatewayId
The ID of the Direct Connect gateway.
Integer maxResults
The maximum number of results to return with a single call. To retrieve the remaining results, make another call
with the returned nextToken value.
If MaxResults is given a value larger than 100, only 100 results are returned.
String nextToken
The token provided in the previous call to retrieve the next page.
SdkInternalList<T> directConnectGateways
The Direct Connect gateways.
String nextToken
The token to retrieve the next page.
String connectionId
The ID of the interconnect or LAG.
SdkInternalList<T> connections
The connections.
String interconnectId
The ID of the interconnect.
String providerName
The name of the service provider who establishes connectivity on your behalf. If you supply this parameter, the LOA-CFA lists the provider name alongside your company name as the requester of the cross connect.
String loaContentType
The standard media type for the LOA-CFA document. The only supported value is application/pdf.
Loa loa
The Letter of Authorization - Connecting Facility Assignment (LOA-CFA).
String interconnectId
The ID of the interconnect.
SdkInternalList<T> interconnects
The interconnects.
String lagId
The ID of the LAG.
SdkInternalList<T> lags
The LAGs.
String connectionId
The ID of a connection, LAG, or interconnect.
String providerName
The name of the service provider who establishes connectivity on your behalf. If you specify this parameter, the LOA-CFA lists the provider name alongside your company name as the requester of the cross connect.
String loaContentType
The standard media type for the LOA-CFA document. The only supported value is application/pdf.
ByteBuffer loaContent
The binary contents of the LOA-CFA document.
String loaContentType
The standard media type for the LOA-CFA document. The only supported value is application/pdf.
SdkInternalList<T> locations
The locations.
String customerRouterConfig
The customer router configuration.
RouterType router
The details about the router.
String virtualInterfaceId
The ID assigned to the virtual interface.
String virtualInterfaceName
Provides the details about a virtual interface's router.
SdkInternalList<T> resourceArns
The Amazon Resource Names (ARNs) of the resources.
SdkInternalList<T> resourceTags
Information about the tags.
SdkInternalList<T> virtualGateways
The virtual private gateways.
SdkInternalList<T> virtualInterfaces
The virtual interfaces
String directConnectGatewayId
The ID of the Direct Connect gateway.
String directConnectGatewayName
The name of the Direct Connect gateway.
Long amazonSideAsn
The autonomous system number (ASN) for the Amazon side of the connection.
String ownerAccount
The ID of the Amazon Web Services account that owns the Direct Connect gateway.
String directConnectGatewayState
The state of the Direct Connect gateway. The following are the possible values:
pending: The initial state after calling CreateDirectConnectGateway.
available: The Direct Connect gateway is ready for use.
deleting: The initial state after calling DeleteDirectConnectGateway.
deleted: The Direct Connect gateway is deleted and cannot pass traffic.
String stateChangeError
The error message if the state of an object failed to advance.
String directConnectGatewayId
The ID of the Direct Connect gateway.
String directConnectGatewayOwnerAccount
The ID of the Amazon Web Services account that owns the associated gateway.
String associationState
The state of the association. The following are the possible values:
associating: The initial state after calling CreateDirectConnectGatewayAssociation.
associated: The Direct Connect gateway and virtual private gateway or transit gateway are
successfully associated and ready to pass traffic.
disassociating: The initial state after calling DeleteDirectConnectGatewayAssociation.
disassociated: The virtual private gateway or transit gateway is disassociated from the Direct
Connect gateway. Traffic flow between the Direct Connect gateway and virtual private gateway or transit gateway
is stopped.
updating: The CIDR blocks for the virtual private gateway or transit gateway are currently being
updated. This could be new CIDR blocks added or current CIDR blocks removed.
String stateChangeError
The error message if the state of an object failed to advance.
AssociatedGateway associatedGateway
Information about the associated gateway.
String associationId
The ID of the Direct Connect gateway association.
SdkInternalList<T> allowedPrefixesToDirectConnectGateway
The Amazon VPC prefixes to advertise to the Direct Connect gateway.
String virtualGatewayId
The ID of the virtual private gateway. Applies only to private virtual interfaces.
String virtualGatewayRegion
The Amazon Web Services Region where the virtual private gateway is located.
String virtualGatewayOwnerAccount
The ID of the Amazon Web Services account that owns the virtual private gateway.
String proposalId
The ID of the association proposal.
String directConnectGatewayId
The ID of the Direct Connect gateway.
String directConnectGatewayOwnerAccount
The ID of the Amazon Web Services account that owns the Direct Connect gateway.
String proposalState
The state of the proposal. The following are possible values:
accepted: The proposal has been accepted. The Direct Connect gateway association is available to use
in this state.
deleted: The proposal has been deleted by the owner that made the proposal. The Direct Connect
gateway association cannot be used in this state.
requested: The proposal has been requested. The Direct Connect gateway association cannot be used in
this state.
AssociatedGateway associatedGateway
Information about the associated gateway.
SdkInternalList<T> existingAllowedPrefixesToDirectConnectGateway
The existing Amazon VPC prefixes advertised to the Direct Connect gateway.
SdkInternalList<T> requestedAllowedPrefixesToDirectConnectGateway
The Amazon VPC prefixes to advertise to the Direct Connect gateway.
String directConnectGatewayId
The ID of the Direct Connect gateway.
String virtualInterfaceId
The ID of the virtual interface.
String virtualInterfaceRegion
The Amazon Web Services Region where the virtual interface is located.
String virtualInterfaceOwnerAccount
The ID of the Amazon Web Services account that owns the virtual interface.
String attachmentState
The state of the attachment. The following are the possible values:
attaching: The initial state after a virtual interface is created using the Direct Connect gateway.
attached: The Direct Connect gateway and virtual interface are attached and ready to pass traffic.
detaching: The initial state after calling DeleteVirtualInterface.
detached: The virtual interface is detached from the Direct Connect gateway. Traffic flow between
the Direct Connect gateway and virtual interface is stopped.
String attachmentType
The type of attachment.
String stateChangeError
The error message if the state of an object failed to advance.
String ownerAccount
The ID of the Amazon Web Services account that owns the connection.
String connectionId
The ID of the connection.
String connectionName
The name of the connection.
String connectionState
The state of the connection. The following are the possible values:
ordering: The initial state of a hosted connection provisioned on an interconnect. The connection
stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
requested: The initial state of a standard connection. The connection stays in the requested state
until the Letter of Authorization (LOA) is sent to the customer.
pending: The connection has been approved and is being initialized.
available: The network link is up and the connection is ready for use.
down: The network link is down.
deleting: The connection is being deleted.
deleted: The connection has been deleted.
rejected: A hosted connection in the ordering state enters the rejected
state if it is deleted by the customer.
unknown: The state of the connection is not available.
String region
The Amazon Web Services Region where the connection is located.
String location
The location of the connection.
String bandwidth
The bandwidth of the connection.
Integer vlan
The ID of the VLAN.
String partnerName
The name of the Direct Connect service provider associated with the connection.
Date loaIssueTime
The time of the most recent call to DescribeLoa for this connection.
String lagId
The ID of the LAG.
String awsDevice
The Direct Connect endpoint on which the physical connection terminates.
Boolean jumboFrameCapable
Indicates whether jumbo frames are supported.
String awsDeviceV2
The Direct Connect endpoint that terminates the physical connection.
String awsLogicalDeviceId
The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.
String hasLogicalRedundancy
Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).
SdkInternalList<T> tags
The tags associated with the connection.
String providerName
The name of the service provider associated with the connection.
Boolean macSecCapable
Indicates whether the connection supports MAC Security (MACsec).
String portEncryptionStatus
The MAC Security (MACsec) port link status of the connection.
The valid values are Encryption Up, which means that there is an active Connection Key Name, or
Encryption Down.
String encryptionMode
The MAC Security (MACsec) connection encryption mode.
The valid values are no_encrypt, should_encrypt, and must_encrypt.
SdkInternalList<T> macSecKeys
The MAC Security (MACsec) security keys associated with the connection.
String connectionId
The ID of the dedicated connection (dxcon-xxxx), or the ID of the LAG (dxlag-xxxx).
You can use DescribeConnections or DescribeLags to retrieve connection ID.
String secretARN
The Amazon Resource Name (ARN) of the MAC Security (MACsec) secret key.
You can use DescribeConnections to retrieve the ARN of the MAC Security (MACsec) secret key.
String connectionId
The ID of the dedicated connection (dxcon-xxxx), or the ID of the LAG (dxlag-xxxx).
SdkInternalList<T> macSecKeys
The MAC Security (MACsec) security keys no longer associated with the dedicated connection.
String interconnectId
The ID of the interconnect.
String interconnectName
The name of the interconnect.
String interconnectState
The state of the interconnect. The following are the possible values:
requested: The initial state of an interconnect. The interconnect stays in the requested state until
the Letter of Authorization (LOA) is sent to the customer.
pending: The interconnect is approved, and is being initialized.
available: The network link is up, and the interconnect is ready for use.
down: The network link is down.
deleting: The interconnect is being deleted.
deleted: The interconnect is deleted.
unknown: The state of the interconnect is not available.
String region
The Amazon Web Services Region where the connection is located.
String location
The location of the connection.
String bandwidth
The bandwidth of the connection.
Date loaIssueTime
The time of the most recent call to DescribeLoa for this connection.
String lagId
The ID of the LAG.
String awsDevice
The Direct Connect endpoint on which the physical connection terminates.
Boolean jumboFrameCapable
Indicates whether jumbo frames are supported.
String awsDeviceV2
The Direct Connect endpoint that terminates the physical connection.
String awsLogicalDeviceId
The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.
String hasLogicalRedundancy
Indicates whether the interconnect supports a secondary BGP in the same address family (IPv4/IPv6).
SdkInternalList<T> tags
The tags associated with the interconnect.
String providerName
The name of the service provider associated with the interconnect.
String connectionsBandwidth
The individual bandwidth of the physical connections bundled by the LAG. The possible values are 1Gbps and 10Gbps.
Integer numberOfConnections
The number of physical dedicated connections bundled by the LAG, up to a maximum of 10.
String lagId
The ID of the LAG.
String ownerAccount
The ID of the Amazon Web Services account that owns the LAG.
String lagName
The name of the LAG.
String lagState
The state of the LAG. The following are the possible values:
requested: The initial state of a LAG. The LAG stays in the requested state until the Letter of
Authorization (LOA) is available.
pending: The LAG has been approved and is being initialized.
available: The network link is established and the LAG is ready for use.
down: The network link is down.
deleting: The LAG is being deleted.
deleted: The LAG is deleted.
unknown: The state of the LAG is not available.
String location
The location of the LAG.
String region
The Amazon Web Services Region where the connection is located.
Integer minimumLinks
The minimum number of physical dedicated connections that must be operational for the LAG itself to be operational.
String awsDevice
The Direct Connect endpoint that hosts the LAG.
String awsDeviceV2
The Direct Connect endpoint that hosts the LAG.
String awsLogicalDeviceId
The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.
SdkInternalList<T> connections
The connections bundled by the LAG.
Boolean allowsHostedConnections
Indicates whether the LAG can host other connections.
Boolean jumboFrameCapable
Indicates whether jumbo frames are supported.
String hasLogicalRedundancy
Indicates whether the LAG supports a secondary BGP peer in the same address family (IPv4/IPv6).
SdkInternalList<T> tags
The tags associated with the LAG.
String providerName
The name of the service provider associated with the LAG.
Boolean macSecCapable
Indicates whether the LAG supports MAC Security (MACsec).
String encryptionMode
The LAG MAC Security (MACsec) encryption mode.
The valid values are no_encrypt, should_encrypt, and must_encrypt.
SdkInternalList<T> macSecKeys
The MAC Security (MACsec) security keys associated with the LAG.
String testId
The ID of the virtual interface failover test.
String virtualInterfaceId
The ID of the virtual interface that was tested.
SdkInternalList<T> bgpPeers
The BGP peers that were placed in the DOWN state during the virtual interface failover test.
String status
The status of the virtual interface failover test.
Integer maxResults
The maximum number of results to return with a single call. To retrieve the remaining results, make another call
with the returned nextToken value.
If MaxResults is given a value larger than 100, only 100 results are returned.
String nextToken
The token for the next page of results.
SdkInternalList<T> virtualInterfaceTestHistory
The ID of the tested virtual interface.
String nextToken
The token to use to retrieve the next page of results. This value is null when there are no more
results to return.
ByteBuffer loaContent
The binary contents of the LOA-CFA document.
String loaContentType
The standard media type for the LOA-CFA document. The only supported value is application/pdf.
String locationCode
The code for the location.
String locationName
The name of the location. This includes the name of the colocation partner and the physical site of the building.
String region
The Amazon Web Services Region for the location.
SdkInternalList<T> availablePortSpeeds
The available port speeds for the location.
SdkInternalList<T> availableProviders
The name of the service provider for the location.
SdkInternalList<T> availableMacSecPortSpeeds
The available MAC Security (MACsec) port speeds for the location.
String secretARN
The Amazon Resource Name (ARN) of the MAC Security (MACsec) secret key.
String ckn
The Connection Key Name (CKN) for the MAC Security secret key.
String state
The state of the MAC Security (MACsec) secret key.
The possible values are:
associating: The MAC Security (MACsec) secret key is being validated and not yet associated with the
connection or LAG.
associated: The MAC Security (MACsec) secret key is validated and associated with the connection or
LAG.
disassociating: The MAC Security (MACsec) secret key is being disassociated from the connection or
LAG
disassociated: The MAC Security (MACsec) secret key is no longer associated with the connection or
LAG.
String startOn
The date that the MAC Security (MACsec) secret key takes effect. The value is displayed in UTC format.
Integer asn
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
String authKey
The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.
String addressFamily
The address family for the BGP peer.
String amazonAddress
The IP address assigned to the Amazon interface.
String customerAddress
The IP address assigned to the customer interface.
String virtualInterfaceName
The name of the virtual interface assigned by the customer network. The name has a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a hyphen (-).
Integer vlan
The ID of the VLAN.
Integer asn
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
The valid values are 1-2147483647.
Integer mtu
The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 9001. The default value is 1500.
String authKey
The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.
String amazonAddress
The IP address assigned to the Amazon interface.
String customerAddress
The IP address assigned to the customer interface.
String addressFamily
The address family for the BGP peer.
String virtualGatewayId
The ID of the virtual private gateway.
String directConnectGatewayId
The ID of the Direct Connect gateway.
SdkInternalList<T> tags
The tags associated with the private virtual interface.
Boolean enableSiteLink
Indicates whether to enable or disable SiteLink.
String virtualInterfaceName
The name of the virtual interface assigned by the customer network. The name has a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a hyphen (-).
Integer vlan
The ID of the VLAN.
Integer asn
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
The valid values are 1-2147483647.
Integer mtu
The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 9001. The default value is 1500.
String authKey
The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.
String amazonAddress
The IP address assigned to the Amazon interface.
String addressFamily
The address family for the BGP peer.
String customerAddress
The IP address assigned to the customer interface.
SdkInternalList<T> tags
The tags associated with the private virtual interface.
String virtualInterfaceName
The name of the virtual interface assigned by the customer network. The name has a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a hyphen (-).
Integer vlan
The ID of the VLAN.
Integer asn
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
The valid values are 1-2147483647.
String authKey
The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.
String amazonAddress
The IP address assigned to the Amazon interface.
String customerAddress
The IP address assigned to the customer interface.
String addressFamily
The address family for the BGP peer.
SdkInternalList<T> routeFilterPrefixes
The routes to be advertised to the Amazon Web Services network in this Region. Applies to public virtual interfaces.
SdkInternalList<T> tags
The tags associated with the public virtual interface.
String virtualInterfaceName
The name of the virtual interface assigned by the customer network. The name has a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a hyphen (-).
Integer vlan
The ID of the VLAN.
Integer asn
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
The valid values are 1-2147483647.
String authKey
The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.
String amazonAddress
The IP address assigned to the Amazon interface.
String customerAddress
The IP address assigned to the customer interface.
String addressFamily
The address family for the BGP peer.
SdkInternalList<T> routeFilterPrefixes
The routes to be advertised to the Amazon Web Services network in this Region. Applies to public virtual interfaces.
SdkInternalList<T> tags
The tags associated with the public virtual interface.
String virtualInterfaceName
The name of the virtual interface assigned by the customer network. The name has a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a hyphen (-).
Integer vlan
The ID of the VLAN.
Integer asn
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
The valid values are 1-2147483647.
Integer mtu
The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 8500. The default value is 1500.
String authKey
The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.
String amazonAddress
The IP address assigned to the Amazon interface.
String customerAddress
The IP address assigned to the customer interface.
String addressFamily
The address family for the BGP peer.
String directConnectGatewayId
The ID of the Direct Connect gateway.
SdkInternalList<T> tags
The tags associated with the transitive virtual interface.
Boolean enableSiteLink
Indicates whether to enable or disable SiteLink.
String virtualInterfaceName
The name of the virtual interface assigned by the customer network. The name has a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a hyphen (-).
Integer vlan
The ID of the VLAN.
Integer asn
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
The valid values are 1-2147483647.
Integer mtu
The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 8500. The default value is 1500
String authKey
The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.
String amazonAddress
The IP address assigned to the Amazon interface.
String customerAddress
The IP address assigned to the customer interface.
String addressFamily
The address family for the BGP peer.
SdkInternalList<T> tags
The tags associated with the transitive virtual interface.
String resourceArn
The Amazon Resource Name (ARN) of the resource.
SdkInternalList<T> tags
The tags.
String cidr
The CIDR block for the advertised route. Separate multiple routes using commas. An IPv6 CIDR must use /64 or shorter.
String vendor
The vendor for the virtual interface's router.
String platform
The virtual interface router platform.
String software
The router software.
String xsltTemplateName
The template for the virtual interface's router.
String xsltTemplateNameForMacSec
The MAC Security (MACsec) template for the virtual interface's router.
String routerTypeIdentifier
Identifies the router by a combination of vendor, platform, and software version. For example,
CiscoSystemsInc-2900SeriesRouters-IOS124.
String virtualInterfaceId
The ID of the virtual interface you want to test.
SdkInternalList<T> bgpPeers
The BGP peers to place in the DOWN state.
Integer testDurationInMinutes
The time in minutes that the virtual interface failover test will last.
Maximum value: 4,320 minutes (72 hours).
Default: 180 minutes (3 hours).
VirtualInterfaceTestHistory virtualInterfaceTest
Information about the virtual interface failover test.
String virtualInterfaceId
The ID of the virtual interface you no longer want to test.
VirtualInterfaceTestHistory virtualInterfaceTest
Information about the virtual interface failover test.
String resourceArn
The Amazon Resource Name (ARN) of the resource.
SdkInternalList<T> tags
The tags to add.
String resourceArn
The Amazon Resource Name (ARN) of the resource.
SdkInternalList<T> tagKeys
The tag keys of the tags to remove.
String connectionId
The ID of the dedicated connection.
You can use DescribeConnections to retrieve the connection ID.
String connectionName
The name of the connection.
String encryptionMode
The connection MAC Security (MACsec) encryption mode.
The valid values are no_encrypt, should_encrypt, and must_encrypt.
String ownerAccount
The ID of the Amazon Web Services account that owns the connection.
String connectionId
The ID of the connection.
String connectionName
The name of the connection.
String connectionState
The state of the connection. The following are the possible values:
ordering: The initial state of a hosted connection provisioned on an interconnect. The connection
stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
requested: The initial state of a standard connection. The connection stays in the requested state
until the Letter of Authorization (LOA) is sent to the customer.
pending: The connection has been approved and is being initialized.
available: The network link is up and the connection is ready for use.
down: The network link is down.
deleting: The connection is being deleted.
deleted: The connection has been deleted.
rejected: A hosted connection in the ordering state enters the rejected
state if it is deleted by the customer.
unknown: The state of the connection is not available.
String region
The Amazon Web Services Region where the connection is located.
String location
The location of the connection.
String bandwidth
The bandwidth of the connection.
Integer vlan
The ID of the VLAN.
String partnerName
The name of the Direct Connect service provider associated with the connection.
Date loaIssueTime
The time of the most recent call to DescribeLoa for this connection.
String lagId
The ID of the LAG.
String awsDevice
The Direct Connect endpoint on which the physical connection terminates.
Boolean jumboFrameCapable
Indicates whether jumbo frames are supported.
String awsDeviceV2
The Direct Connect endpoint that terminates the physical connection.
String awsLogicalDeviceId
The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.
String hasLogicalRedundancy
Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).
SdkInternalList<T> tags
The tags associated with the connection.
String providerName
The name of the service provider associated with the connection.
Boolean macSecCapable
Indicates whether the connection supports MAC Security (MACsec).
String portEncryptionStatus
The MAC Security (MACsec) port link status of the connection.
The valid values are Encryption Up, which means that there is an active Connection Key Name, or
Encryption Down.
String encryptionMode
The MAC Security (MACsec) connection encryption mode.
The valid values are no_encrypt, should_encrypt, and must_encrypt.
SdkInternalList<T> macSecKeys
The MAC Security (MACsec) security keys associated with the connection.
String associationId
The ID of the Direct Connect gateway association.
SdkInternalList<T> addAllowedPrefixesToDirectConnectGateway
The Amazon VPC prefixes to advertise to the Direct Connect gateway.
SdkInternalList<T> removeAllowedPrefixesToDirectConnectGateway
The Amazon VPC prefixes to no longer advertise to the Direct Connect gateway.
DirectConnectGatewayAssociation directConnectGatewayAssociation
DirectConnectGateway directConnectGateway
String lagId
The ID of the LAG.
String lagName
The name of the LAG.
Integer minimumLinks
The minimum number of physical connections that must be operational for the LAG itself to be operational.
String encryptionMode
The LAG MAC Security (MACsec) encryption mode.
Amazon Web Services applies the value to all connections which are part of the LAG.
String connectionsBandwidth
The individual bandwidth of the physical connections bundled by the LAG. The possible values are 1Gbps and 10Gbps.
Integer numberOfConnections
The number of physical dedicated connections bundled by the LAG, up to a maximum of 10.
String lagId
The ID of the LAG.
String ownerAccount
The ID of the Amazon Web Services account that owns the LAG.
String lagName
The name of the LAG.
String lagState
The state of the LAG. The following are the possible values:
requested: The initial state of a LAG. The LAG stays in the requested state until the Letter of
Authorization (LOA) is available.
pending: The LAG has been approved and is being initialized.
available: The network link is established and the LAG is ready for use.
down: The network link is down.
deleting: The LAG is being deleted.
deleted: The LAG is deleted.
unknown: The state of the LAG is not available.
String location
The location of the LAG.
String region
The Amazon Web Services Region where the connection is located.
Integer minimumLinks
The minimum number of physical dedicated connections that must be operational for the LAG itself to be operational.
String awsDevice
The Direct Connect endpoint that hosts the LAG.
String awsDeviceV2
The Direct Connect endpoint that hosts the LAG.
String awsLogicalDeviceId
The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.
SdkInternalList<T> connections
The connections bundled by the LAG.
Boolean allowsHostedConnections
Indicates whether the LAG can host other connections.
Boolean jumboFrameCapable
Indicates whether jumbo frames are supported.
String hasLogicalRedundancy
Indicates whether the LAG supports a secondary BGP peer in the same address family (IPv4/IPv6).
SdkInternalList<T> tags
The tags associated with the LAG.
String providerName
The name of the service provider associated with the LAG.
Boolean macSecCapable
Indicates whether the LAG supports MAC Security (MACsec).
String encryptionMode
The LAG MAC Security (MACsec) encryption mode.
The valid values are no_encrypt, should_encrypt, and must_encrypt.
SdkInternalList<T> macSecKeys
The MAC Security (MACsec) security keys associated with the LAG.
String virtualInterfaceId
The ID of the virtual private interface.
Integer mtu
The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 9001. The default value is 1500.
Boolean enableSiteLink
Indicates whether to enable or disable SiteLink.
String virtualInterfaceName
The name of the virtual private interface.
String ownerAccount
The ID of the Amazon Web Services account that owns the virtual interface.
String virtualInterfaceId
The ID of the virtual interface.
String location
The location of the connection.
String connectionId
The ID of the connection.
String virtualInterfaceType
The type of virtual interface. The possible values are private and public.
String virtualInterfaceName
The name of the virtual interface assigned by the customer network. The name has a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a hyphen (-).
Integer vlan
The ID of the VLAN.
Integer asn
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
The valid values are 1-2147483647.
Long amazonSideAsn
The autonomous system number (ASN) for the Amazon side of the connection.
String authKey
The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.
String amazonAddress
The IP address assigned to the Amazon interface.
String customerAddress
The IP address assigned to the customer interface.
String addressFamily
The address family for the BGP peer.
String virtualInterfaceState
The state of the virtual interface. The following are the possible values:
confirming: The creation of the virtual interface is pending confirmation from the virtual interface
owner. If the owner of the virtual interface is different from the owner of the connection on which it is
provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface
owner.
verifying: This state only applies to public virtual interfaces. Each public virtual interface needs
validation before the virtual interface can be created.
pending: A virtual interface is in this state from the time that it is created until the virtual
interface is ready to forward traffic.
available: A virtual interface that is able to forward traffic.
down: A virtual interface that is BGP down.
deleting: A virtual interface is in this state immediately after calling
DeleteVirtualInterface until it can no longer forward traffic.
deleted: A virtual interface that cannot forward traffic.
rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual
interface in the Confirming state is deleted by the virtual interface owner, the virtual interface
enters the Rejected state.
unknown: The state of the virtual interface is not available.
String customerRouterConfig
The customer router configuration.
Integer mtu
The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 8500. The default value is 1500
Boolean jumboFrameCapable
Indicates whether jumbo frames are supported.
String virtualGatewayId
The ID of the virtual private gateway. Applies only to private virtual interfaces.
String directConnectGatewayId
The ID of the Direct Connect gateway.
SdkInternalList<T> routeFilterPrefixes
The routes to be advertised to the Amazon Web Services network in this Region. Applies to public virtual interfaces.
SdkInternalList<T> bgpPeers
The BGP peers configured on this virtual interface.
String region
The Amazon Web Services Region where the virtual interface is located.
String awsDeviceV2
The Direct Connect endpoint that terminates the physical connection.
String awsLogicalDeviceId
The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.
SdkInternalList<T> tags
The tags associated with the virtual interface.
Boolean siteLinkEnabled
Indicates whether SiteLink is enabled.
String virtualGatewayId
The ID of the virtual private gateway.
String virtualGatewayState
The state of the virtual private gateway. The following are the possible values:
pending: Initial state after creating the virtual private gateway.
available: Ready for use by a private virtual interface.
deleting: Initial state after deleting the virtual private gateway.
deleted: The virtual private gateway is deleted. The private virtual interface is unable to send
traffic over this gateway.
String ownerAccount
The ID of the Amazon Web Services account that owns the virtual interface.
String virtualInterfaceId
The ID of the virtual interface.
String location
The location of the connection.
String connectionId
The ID of the connection.
String virtualInterfaceType
The type of virtual interface. The possible values are private and public.
String virtualInterfaceName
The name of the virtual interface assigned by the customer network. The name has a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a hyphen (-).
Integer vlan
The ID of the VLAN.
Integer asn
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
The valid values are 1-2147483647.
Long amazonSideAsn
The autonomous system number (ASN) for the Amazon side of the connection.
String authKey
The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.
String amazonAddress
The IP address assigned to the Amazon interface.
String customerAddress
The IP address assigned to the customer interface.
String addressFamily
The address family for the BGP peer.
String virtualInterfaceState
The state of the virtual interface. The following are the possible values:
confirming: The creation of the virtual interface is pending confirmation from the virtual interface
owner. If the owner of the virtual interface is different from the owner of the connection on which it is
provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface
owner.
verifying: This state only applies to public virtual interfaces. Each public virtual interface needs
validation before the virtual interface can be created.
pending: A virtual interface is in this state from the time that it is created until the virtual
interface is ready to forward traffic.
available: A virtual interface that is able to forward traffic.
down: A virtual interface that is BGP down.
deleting: A virtual interface is in this state immediately after calling
DeleteVirtualInterface until it can no longer forward traffic.
deleted: A virtual interface that cannot forward traffic.
rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual
interface in the Confirming state is deleted by the virtual interface owner, the virtual interface
enters the Rejected state.
unknown: The state of the virtual interface is not available.
String customerRouterConfig
The customer router configuration.
Integer mtu
The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 8500. The default value is 1500
Boolean jumboFrameCapable
Indicates whether jumbo frames are supported.
String virtualGatewayId
The ID of the virtual private gateway. Applies only to private virtual interfaces.
String directConnectGatewayId
The ID of the Direct Connect gateway.
SdkInternalList<T> routeFilterPrefixes
The routes to be advertised to the Amazon Web Services network in this Region. Applies to public virtual interfaces.
SdkInternalList<T> bgpPeers
The BGP peers configured on this virtual interface.
String region
The Amazon Web Services Region where the virtual interface is located.
String awsDeviceV2
The Direct Connect endpoint that terminates the physical connection.
String awsLogicalDeviceId
The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.
SdkInternalList<T> tags
The tags associated with the virtual interface.
Boolean siteLinkEnabled
Indicates whether SiteLink is enabled.
String testId
The ID of the virtual interface failover test.
String virtualInterfaceId
The ID of the tested virtual interface.
SdkInternalList<T> bgpPeers
The BGP peers that were put in the DOWN state as part of the virtual interface failover test.
String status
The status of the virtual interface failover test.
String ownerAccount
The owner ID of the tested virtual interface.
Integer testDurationInMinutes
The time that the virtual interface failover test ran in minutes.
Date startTime
The time that the virtual interface moves to the DOWN state.
Date endTime
The time that the virtual interface moves out of the DOWN state.
Copyright © 2024. All rights reserved.