| Package | Description |
|---|---|
| com.amazonaws.services.mediaconvert |
AWS Elemental MediaConvert
|
| com.amazonaws.services.mediaconvert.model |
| Class and Description |
|---|
| AacAudioDescriptionBroadcasterMix
Choose BROADCASTER_MIXED_AD when the input contains pre-mixed main audio + audio description (AD) as a stereo pair.
|
| AacCodecProfile
AAC Profile.
|
| AacCodingMode
Mono (Audio Description), Mono, Stereo, or 5.1 channel layout.
|
| AacRateControlMode
Rate Control Mode.
|
| AacRawFormat
Enables LATM/LOAS AAC output.
|
| AacSettings
Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AAC.
|
| AacSpecification
Use MPEG-2 AAC instead of MPEG-4 AAC audio for raw or MPEG-2 Transport Stream containers.
|
| AacVbrQuality
VBR Quality Level - Only used if rate_control_mode is VBR.
|
| Ac3BitstreamMode
Specify the bitstream mode for the AC-3 stream that the encoder emits.
|
| Ac3CodingMode
Dolby Digital coding mode.
|
| Ac3DynamicRangeCompressionProfile
If set to FILM_STANDARD, adds dynamic range compression signaling to the output bitstream as defined in the Dolby
Digital specification.
|
| Ac3LfeFilter
Applies a 120Hz lowpass filter to the LFE channel prior to encoding.
|
| Ac3MetadataControl
When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this
audio data.
|
| Ac3Settings
Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AC3.
|
| AccelerationMode
Specify whether the service runs your job with accelerated transcoding.
|
| AccelerationSettings
Accelerated transcoding can significantly speed up jobs with long, visually complex content.
|
| AccelerationStatus
Describes whether the current job is running with accelerated transcoding.
|
| AfdSignaling
This setting only applies to H.264, H.265, and MPEG2 outputs.
|
| AiffSettings
Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value AIFF.
|
| AlphaBehavior
Ignore this setting unless this input is a QuickTime animation with an alpha channel.
|
| AncillaryConvert608To708
Specify whether this set of input captions appears in your outputs in both 608 and 708 format.
|
| AncillarySourceSettings
Settings for ancillary captions source.
|
| AncillaryTerminateCaptions
By default, the service terminates any unterminated captions at the end of each input.
|
| AntiAlias
The anti-alias filter is automatically applied to all outputs.
|
| AssociateCertificateRequest |
| AssociateCertificateResult |
| AudioCodec
Type of Audio codec.
|
| AudioCodecSettings
Audio codec settings (CodecSettings) under (AudioDescriptions) contains the group of settings related to audio
encoding.
|
| AudioDefaultSelection
Enable this setting on one audio selector to set it as the default for the job.
|
| AudioDescription
Description of audio output
|
| AudioLanguageCodeControl
Specify which source for language code takes precedence for this audio track.
|
| AudioNormalizationAlgorithm
Choose one of the following audio normalization algorithms: ITU-R BS.1770-1: Ungated loudness.
|
| AudioNormalizationAlgorithmControl
When enabled the output audio is corrected using the chosen algorithm.
|
| AudioNormalizationLoudnessLogging
If set to LOG, log each output's audio track loudness to a CSV file.
|
| AudioNormalizationPeakCalculation
If set to TRUE_PEAK, calculate and log the TruePeak for each output's audio track loudness.
|
| AudioNormalizationSettings
Advanced audio normalization settings.
|
| AudioSelector
Selector for Audio
|
| AudioSelectorGroup
Group of Audio Selectors
|
| AudioSelectorType
Specifies the type of the audio selector.
|
| AudioTypeControl
When set to FOLLOW_INPUT, if the input contains an ISO 639 audio_type, then that value is passed through to the
output.
|
| Av1AdaptiveQuantization
Adaptive quantization.
|
| Av1FramerateControl
If you are using the console, use the Framerate setting to specify the frame rate for this output.
|
| Av1FramerateConversionAlgorithm
When set to INTERPOLATE, produces smoother motion during frame rate conversion.
|
| Av1QvbrSettings
Settings for quality-defined variable bitrate encoding with the AV1 codec.
|
| Av1RateControlMode
'With AV1 outputs, for rate control mode, MediaConvert supports only quality-defined variable bitrate (QVBR).
|
| Av1Settings
Required when you set Codec, under VideoDescription>CodecSettings to the value AV1.
|
| Av1SpatialAdaptiveQuantization
Adjust quantization within each frame based on spatial variation of content complexity.
|
| AvailBlanking
Settings for Avail Blanking
|
| AWSMediaConvertException
Base exception for all service exceptions thrown by AWS Elemental MediaConvert
|
| BillingTagsSource
The tag type that AWS Billing and Cost Management will use to sort your AWS Elemental MediaConvert costs on any
billing report that you set up.
|
| BurninDestinationSettings
Burn-In Destination Settings.
|
| BurninSubtitleAlignment
If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the
bottom center of the output.
|
| BurninSubtitleBackgroundColor
Specifies the color of the rectangle behind the captions.
|
| BurninSubtitleFontColor
Specifies the color of the burned-in captions.
|
| BurninSubtitleOutlineColor
Specifies font outline color.
|
| BurninSubtitleShadowColor
Specifies the color of the shadow cast by the captions.
|
| BurninSubtitleTeletextSpacing
Only applies to jobs with input captions in Teletext or STL formats.
|
| CancelJobRequest |
| CancelJobResult |
| CaptionDescription
Description of Caption output
|
| CaptionDescriptionPreset
Caption Description for preset
|
| CaptionDestinationSettings
Specific settings required by destination type.
|
| CaptionDestinationType
Specify the format for this set of captions on this output.
|
| CaptionSelector
Set up captions in your outputs by first selecting them from your input here.
|
| CaptionSourceFramerate
Ignore this setting unless your input captions format is SCC.
|
| CaptionSourceSettings
If your input captions are SCC, TTML, STL, SMI, SRT, or IMSC in an xml file, specify the URI of the input captions
source file.
|
| CaptionSourceType
Use Source (SourceType) to identify the format of your input captions.
|
| ChannelMapping
Channel mapping (ChannelMapping) contains the group of fields that hold the remixing value for each channel.
|
| CmafAdditionalManifest
Specify the details for each pair of HLS and DASH additional manifests that you want the service to generate for this
CMAF output group.
|
| CmafClientCache
When set to ENABLED, sets #EXT-X-ALLOW-CACHE:no tag, which prevents client from saving media segments for later
replay.
|
| CmafCodecSpecification
Specification to use (RFC-6381 or the default RFC-4281) during m3u8 playlist generation.
|
| CmafEncryptionSettings
Settings for CMAF encryption
|
| CmafEncryptionType
Specify the encryption scheme that you want the service to use when encrypting your CMAF segments.
|
| CmafGroupSettings
Required when you set (Type) under (OutputGroups)>(OutputGroupSettings) to CMAF_GROUP_SETTINGS.
|
| CmafInitializationVectorInManifest
When you use DRM with CMAF outputs, choose whether the service writes the 128-bit encryption initialization vector in
the HLS and DASH manifests.
|
| CmafKeyProviderType
Specify whether your DRM encryption key is static or from a key provider that follows the SPEKE standard.
|
| CmafManifestCompression
When set to GZIP, compresses HLS playlist.
|
| CmafManifestDurationFormat
Indicates whether the output manifest should use floating point values for segment duration.
|
| CmafMpdProfile
Specify whether your DASH profile is on-demand or main.
|
| CmafSegmentControl
When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length
and Segment Length.
|
| CmafStreamInfResolution
Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.
|
| CmafWriteDASHManifest
When set to ENABLED, a DASH MPD manifest will be generated for this output.
|
| CmafWriteHLSManifest
When set to ENABLED, an Apple HLS manifest will be generated for this output.
|
| CmafWriteSegmentTimelineInRepresentation
When you enable Precise segment duration in DASH manifests (writeSegmentTimelineInRepresentation), your DASH manifest
shows precise segment durations.
|
| CmfcScte35Esam
Use this setting only when you specify SCTE-35 markers from ESAM.
|
| CmfcScte35Source
Ignore this setting unless you have SCTE-35 markers in your input video file.
|
| CmfcSettings
Settings for MP4 segments in CMAF
|
| ColorCorrector
Settings for color correction.
|
| ColorMetadata
Choose Insert (INSERT) for this setting to include color metadata in this output.
|
| ColorSpace
If your input video has accurate color space metadata, or if you don't know about color space, leave this set to the
default value Follow (FOLLOW).
|
| ColorSpaceConversion
Specify the color space you want for this output.
|
| ColorSpaceUsage
There are two sources for color metadata, the input file and the job input settings Color space (ColorSpace) and HDR
master display information settings(Hdr10Metadata).
|
| Commitment
The length of the term of your reserved queue pricing plan commitment.
|
| ContainerSettings
Container specific settings.
|
| ContainerType
Container for this output.
|
| CreateJobRequest |
| CreateJobResult |
| CreateJobTemplateRequest |
| CreateJobTemplateResult |
| CreatePresetRequest |
| CreatePresetResult |
| CreateQueueRequest |
| CreateQueueResult |
| DashAdditionalManifest
Specify the details for each additional DASH manifest that you want the service to generate for this output group.
|
| DashIsoEncryptionSettings
Specifies DRM settings for DASH outputs.
|
| DashIsoGroupSettings
Required when you set (Type) under (OutputGroups)>(OutputGroupSettings) to DASH_ISO_GROUP_SETTINGS.
|
| DashIsoHbbtvCompliance
Supports HbbTV specification as indicated
|
| DashIsoMpdProfile
Specify whether your DASH profile is on-demand or main.
|
| DashIsoPlaybackDeviceCompatibility
This setting can improve the compatibility of your output with video players on obsolete devices.
|
| DashIsoSegmentControl
When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length
and Segment Length.
|
| DashIsoWriteSegmentTimelineInRepresentation
When you enable Precise segment duration in manifests (writeSegmentTimelineInRepresentation), your DASH manifest
shows precise segment durations.
|
| DecryptionMode
Specify the encryption mode that you used to encrypt your input files.
|
| DeinterlaceAlgorithm
Only applies when you set Deinterlacer (DeinterlaceMode) to Deinterlace (DEINTERLACE) or Adaptive (ADAPTIVE).
|
| Deinterlacer
Settings for deinterlacer
|
| DeinterlacerControl
- When set to NORMAL (default), the deinterlacer does not convert frames that are tagged in metadata as progressive.
|
| DeinterlacerMode
Use Deinterlacer (DeinterlaceMode) to choose how the service will do deinterlacing.
|
| DeleteJobTemplateRequest |
| DeleteJobTemplateResult |
| DeletePresetRequest |
| DeletePresetResult |
| DeleteQueueRequest |
| DeleteQueueResult |
| DescribeEndpointsMode
Optional field, defaults to DEFAULT.
|
| DescribeEndpointsRequest
DescribeEndpointsRequest
|
| DescribeEndpointsResult |
| DestinationSettings
Settings associated with the destination.
|
| DisassociateCertificateRequest |
| DisassociateCertificateResult |
| DolbyVision
Settings for Dolby Vision
|
| DolbyVisionLevel6Metadata
Use these settings when you set DolbyVisionLevel6Mode to SPECIFY to override the MaxCLL and MaxFALL values in your
input with new values.
|
| DolbyVisionLevel6Mode
Use Dolby Vision Mode to choose how the service will handle Dolby Vision MaxCLL and MaxFALL properies.
|
| DolbyVisionProfile
In the current MediaConvert implementation, the Dolby Vision profile is always 5 (PROFILE_5).
|
| DropFrameTimecode
Applies only to 29.97 fps outputs.
|
| DvbNitSettings
Inserts DVB Network Information Table (NIT) at the specified table repetition interval.
|
| DvbSdtSettings
Inserts DVB Service Description Table (NIT) at the specified table repetition interval.
|
| DvbSubDestinationSettings
DVB-Sub Destination Settings
|
| DvbSubSourceSettings
DVB Sub Source Settings
|
| DvbSubtitleAlignment
If no explicit x_position or y_position is provided, setting alignment to centered will place the captions at the
bottom center of the output.
|
| DvbSubtitleBackgroundColor
Specifies the color of the rectangle behind the captions.
|
| DvbSubtitleFontColor
Specifies the color of the burned-in captions.
|
| DvbSubtitleOutlineColor
Specifies font outline color.
|
| DvbSubtitleShadowColor
Specifies the color of the shadow cast by the captions.
|
| DvbSubtitleTeletextSpacing
Only applies to jobs with input captions in Teletext or STL formats.
|
| DvbSubtitlingType
Specify whether your DVB subtitles are standard or for hearing impaired.
|
| DvbTdtSettings
Inserts DVB Time and Date Table (TDT) at the specified table repetition interval.
|
| Eac3AtmosBitstreamMode
Specify the bitstream mode for the E-AC-3 stream that the encoder emits.
|
| Eac3AtmosCodingMode
The coding mode for Dolby Digital Plus JOC (Atmos) is always 9.1.6 (CODING_MODE_9_1_6).
|
| Eac3AtmosDialogueIntelligence
Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
|
| Eac3AtmosDynamicRangeCompressionLine
Specify the absolute peak level for a signal with dynamic range compression.
|
| Eac3AtmosDynamicRangeCompressionRf
Specify how the service limits the audio dynamic range when compressing the audio.
|
| Eac3AtmosMeteringMode
Choose how the service meters the loudness of your audio.
|
| Eac3AtmosSettings
Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3_ATMOS.
|
| Eac3AtmosStereoDownmix
Choose how the service does stereo downmixing.
|
| Eac3AtmosSurroundExMode
Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and
right surround channels.
|
| Eac3AttenuationControl
If set to ATTENUATE_3_DB, applies a 3 dB attenuation to the surround channels.
|
| Eac3BitstreamMode
Specify the bitstream mode for the E-AC-3 stream that the encoder emits.
|
| Eac3CodingMode
Dolby Digital Plus coding mode.
|
| Eac3DcFilter
Activates a DC highpass filter for all input channels.
|
| Eac3DynamicRangeCompressionLine
Specify the absolute peak level for a signal with dynamic range compression.
|
| Eac3DynamicRangeCompressionRf
Specify how the service limits the audio dynamic range when compressing the audio.
|
| Eac3LfeControl
When encoding 3/2 audio, controls whether the LFE channel is enabled
|
| Eac3LfeFilter
Applies a 120Hz lowpass filter to the LFE channel prior to encoding.
|
| Eac3MetadataControl
When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this
audio data.
|
| Eac3PassthroughControl
When set to WHEN_POSSIBLE, input DD+ audio will be passed through if it is present on the input.
|
| Eac3PhaseControl
Controls the amount of phase-shift applied to the surround channels.
|
| Eac3Settings
Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3.
|
| Eac3StereoDownmix
Choose how the service does stereo downmixing.
|
| Eac3SurroundExMode
When encoding 3/2 audio, sets whether an extra center back surround channel is matrix encoded into the left and right
surround channels.
|
| Eac3SurroundMode
When encoding 2/0 audio, sets whether Dolby Surround is matrix encoded into the two channels.
|
| EmbeddedConvert608To708
Specify whether this set of input captions appears in your outputs in both 608 and 708 format.
|
| EmbeddedDestinationSettings
Settings specific to embedded/ancillary caption outputs, including 608/708 Channel destination number.
|
| EmbeddedSourceSettings
Settings for embedded captions Source
|
| EmbeddedTerminateCaptions
By default, the service terminates any unterminated captions at the end of each input.
|
| Endpoint
Describes an account-specific API endpoint.
|
| EsamManifestConfirmConditionNotification
ESAM ManifestConfirmConditionNotification defined by OC-SP-ESAM-API-I03-131025.
|
| EsamSettings
Settings for Event Signaling And Messaging (ESAM).
|
| EsamSignalProcessingNotification
ESAM SignalProcessingNotification data defined by OC-SP-ESAM-API-I03-131025.
|
| F4vMoovPlacement
If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for
progressive downloading.
|
| F4vSettings
Settings for F4v container
|
| FileGroupSettings
Required when you set (Type) under (OutputGroups)>(OutputGroupSettings) to FILE_GROUP_SETTINGS.
|
| FileSourceConvert608To708
Specify whether this set of input captions appears in your outputs in both 608 and 708 format.
|
| FileSourceSettings
If your input captions are SCC, SMI, SRT, STL, TTML, or IMSC 1.1 in an xml file, specify the URI of the input caption
source file.
|
| FontScript
Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the
script type.
|
| FrameCaptureSettings
Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value FRAME_CAPTURE.
|
| GetJobRequest |
| GetJobResult |
| GetJobTemplateRequest |
| GetJobTemplateResult |
| GetPresetRequest |
| GetPresetResult |
| GetQueueRequest |
| GetQueueResult |
| H264AdaptiveQuantization
Adaptive quantization.
|
| H264CodecLevel
Specify an H.264 level that is consistent with your output video settings.
|
| H264CodecProfile
H.264 Profile.
|
| H264DynamicSubGop
Choose Adaptive to improve subjective video quality for high-motion content.
|
| H264EntropyEncoding
Entropy encoding mode.
|
| H264FieldEncoding
Choosing FORCE_FIELD disables PAFF encoding for interlaced outputs.
|
| H264FlickerAdaptiveQuantization
Adjust quantization within each frame to reduce flicker or 'pop' on I-frames.
|
| H264FramerateControl
If you are using the console, use the Framerate setting to specify the frame rate for this output.
|
| H264FramerateConversionAlgorithm
When set to INTERPOLATE, produces smoother motion during frame rate conversion.
|
| H264GopBReference
If enable, use reference B frames for GOP structures that have B frames > 1.
|
| H264GopSizeUnits
Indicates if the GOP Size in H264 is specified in frames or seconds.
|
| H264InterlaceMode
Use Interlace mode (InterlaceMode) to choose the scan line type for the output.
|
| H264ParControl
Using the API, enable ParFollowSource if you want the service to use the pixel aspect ratio from the input.
|
| H264QualityTuningLevel
Use Quality tuning level (H264QualityTuningLevel) to specifiy whether to use fast single-pass, high-quality
singlepass, or high-quality multipass video encoding.
|
| H264QvbrSettings
Settings for quality-defined variable bitrate encoding with the H.264 codec.
|
| H264RateControlMode
Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or
quality-defined variable bitrate (QVBR).
|
| H264RepeatPps
Places a PPS header on each encoded picture, even if repeated.
|
| H264SceneChangeDetect
Enable this setting to insert I-frames at scene changes that the service automatically detects.
|
| H264Settings
Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value H_264.
|
| H264SlowPal
Enables Slow PAL rate conversion.
|
| H264SpatialAdaptiveQuantization
Adjust quantization within each frame based on spatial variation of content complexity.
|
| H264Syntax
Produces a bitstream compliant with SMPTE RP-2027.
|
| H264Telecine
This field applies only if the Streams > Advanced > Framerate (framerate) field is set to 29.970.
|
| H264TemporalAdaptiveQuantization
Adjust quantization within each frame based on temporal variation of content complexity.
|
| H264UnregisteredSeiTimecode
Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
|
| H265AdaptiveQuantization
Adaptive quantization.
|
| H265AlternateTransferFunctionSei
Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer
Function (EOTF).
|
| H265CodecLevel
H.265 Level.
|
| H265CodecProfile
Represents the Profile and Tier, per the HEVC (H.265) specification.
|
| H265DynamicSubGop
Choose Adaptive to improve subjective video quality for high-motion content.
|
| H265FlickerAdaptiveQuantization
Adjust quantization within each frame to reduce flicker or 'pop' on I-frames.
|
| H265FramerateControl
If you are using the console, use the Framerate setting to specify the frame rate for this output.
|
| H265FramerateConversionAlgorithm
When set to INTERPOLATE, produces smoother motion during frame rate conversion.
|
| H265GopBReference
If enable, use reference B frames for GOP structures that have B frames > 1.
|
| H265GopSizeUnits
Indicates if the GOP Size in H265 is specified in frames or seconds.
|
| H265InterlaceMode
Choose the scan line type for the output.
|
| H265ParControl
Using the API, enable ParFollowSource if you want the service to use the pixel aspect ratio from the input.
|
| H265QualityTuningLevel
Use Quality tuning level (H265QualityTuningLevel) to specifiy whether to use fast single-pass, high-quality
singlepass, or high-quality multipass video encoding.
|
| H265QvbrSettings
Settings for quality-defined variable bitrate encoding with the H.265 codec.
|
| H265RateControlMode
Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or
quality-defined variable bitrate (QVBR).
|
| H265SampleAdaptiveOffsetFilterMode
Specify Sample Adaptive Offset (SAO) filter strength.
|
| H265SceneChangeDetect
Enable this setting to insert I-frames at scene changes that the service automatically detects.
|
| H265Settings
Settings for H265 codec
|
| H265SlowPal
Enables Slow PAL rate conversion.
|
| H265SpatialAdaptiveQuantization
Adjust quantization within each frame based on spatial variation of content complexity.
|
| H265Telecine
This field applies only if the Streams > Advanced > Framerate (framerate) field is set to 29.970.
|
| H265TemporalAdaptiveQuantization
Adjust quantization within each frame based on temporal variation of content complexity.
|
| H265TemporalIds
Enables temporal layer identifiers in the encoded bitstream.
|
| H265Tiles
Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
|
| H265UnregisteredSeiTimecode
Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
|
| H265WriteMp4PackagingType
If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting.
|
| Hdr10Metadata
Use these settings to specify static color calibration metadata, as defined by SMPTE ST 2086.
|
| HlsAdditionalManifest
Specify the details for each additional HLS manifest that you want the service to generate for this output group.
|
| HlsAdMarkers |
| HlsAudioOnlyContainer
Use this setting only in audio-only outputs.
|
| HlsAudioTrackType
Four types of audio-only tracks are supported: Audio-Only Variant Stream The client can play back this audio-only
stream instead of video in low-bandwidth scenarios.
|
| HlsCaptionLanguageMapping
Caption Language Mapping
|
| HlsCaptionLanguageSetting
Applies only to 608 Embedded output captions.
|
| HlsClientCache
When set to ENABLED, sets #EXT-X-ALLOW-CACHE:no tag, which prevents client from saving media segments for later
replay.
|
| HlsCodecSpecification
Specification to use (RFC-6381 or the default RFC-4281) during m3u8 playlist generation.
|
| HlsDirectoryStructure
Indicates whether segments should be placed in subdirectories.
|
| HlsEncryptionSettings
Settings for HLS encryption
|
| HlsEncryptionType
Encrypts the segments with the given encryption scheme.
|
| HlsGroupSettings
Required when you set (Type) under (OutputGroups)>(OutputGroupSettings) to HLS_GROUP_SETTINGS.
|
| HlsIFrameOnlyManifest
When set to INCLUDE, writes I-Frame Only Manifest in addition to the HLS manifest
|
| HlsInitializationVectorInManifest
The Initialization Vector is a 128-bit number used in conjunction with the key for encrypting blocks.
|
| HlsKeyProviderType
Specify whether your DRM encryption key is static or from a key provider that follows the SPEKE standard.
|
| HlsManifestCompression
When set to GZIP, compresses HLS playlist.
|
| HlsManifestDurationFormat
Indicates whether the output manifest should use floating point values for segment duration.
|
| HlsOfflineEncrypted
Enable this setting to insert the EXT-X-SESSION-KEY element into the master playlist.
|
| HlsOutputSelection
Indicates whether the .m3u8 manifest file should be generated for this HLS output group.
|
| HlsProgramDateTime
Includes or excludes EXT-X-PROGRAM-DATE-TIME tag in .m3u8 manifest files.
|
| HlsSegmentControl
When set to SINGLE_FILE, emits program as a single media resource (.ts) file, uses #EXT-X-BYTERANGE tags to index
segment for playback.
|
| HlsSettings
Settings for HLS output groups
|
| HlsStreamInfResolution
Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.
|
| HlsTimedMetadataId3Frame
Indicates ID3 frame that has the timecode.
|
| HopDestination
Optional.
|
| Id3Insertion
To insert ID3 tags in your output, specify two values.
|
| ImageInserter
Enable the image inserter feature to include a graphic overlay on your video.
|
| ImscDestinationSettings
Settings specific to IMSC caption outputs.
|
| ImscStylePassthrough
Keep this setting enabled to have MediaConvert use the font style and position information from the captions source
in the output.
|
| Input
Specifies media input
|
| InputClipping
To transcode only portions of your input (clips), include one Input clipping (one instance of InputClipping in the
JSON job file) for each input clip.
|
| InputDeblockFilter
Enable Deblock (InputDeblockFilter) to produce smoother motion in the output.
|
| InputDecryptionSettings
Settings for decrypting any input files that you encrypt before you upload them to Amazon S3.
|
| InputDenoiseFilter
Enable Denoise (InputDenoiseFilter) to filter noise from the input.
|
| InputFilterEnable
Use Filter enable (InputFilterEnable) to specify how the transcoding service applies the denoise and deblock filters.
|
| InputPsiControl
Set PSI control (InputPsiControl) for transport stream inputs to specify which data the demux process to scans.
|
| InputRotate
Use Rotate (InputRotate) to specify how the service rotates your video.
|
| InputTemplate
Specified video input in a template.
|
| InputTimecodeSource
Use this Timecode source setting, located under the input settings (InputTimecodeSource), to specify how the service
counts input video frames.
|
| InsertableImage
Settings that specify how your still graphic overlay appears.
|
| Job
Each job converts an input file into an output file or files.
|
| JobMessages
Provides messages from the service about jobs that you have already successfully submitted.
|
| JobPhase
A job's phase can be PROBING, TRANSCODING OR UPLOADING
|
| JobSettings
JobSettings contains all the transcode settings for a job.
|
| JobStatus
A job's status can be SUBMITTED, PROGRESSING, COMPLETE, CANCELED, or ERROR.
|
| JobTemplate
A job template is a pre-made set of encoding instructions that you can use to quickly create a job.
|
| JobTemplateListBy
Optional.
|
| JobTemplateSettings
JobTemplateSettings contains all the transcode settings saved in the template that will be applied to jobs created
from it.
|
| LanguageCode
Specify the language, using the ISO 639-2 three-letter code listed at
https://www.loc.gov/standards/iso639-2/php/code_list.php.
|
| ListJobsRequest |
| ListJobsResult |
| ListJobTemplatesRequest |
| ListJobTemplatesResult |
| ListPresetsRequest |
| ListPresetsResult |
| ListQueuesRequest |
| ListQueuesResult |
| ListTagsForResourceRequest |
| ListTagsForResourceResult |
| M2tsAudioBufferModel
Selects between the DVB and ATSC buffer models for Dolby Digital audio.
|
| M2tsBufferModel
Controls what buffer model to use for accurate interleaving.
|
| M2tsEbpAudioInterval
When set to VIDEO_AND_FIXED_INTERVALS, audio EBP markers will be added to partitions 3 and 4.
|
| M2tsEbpPlacement
Selects which PIDs to place EBP markers on.
|
| M2tsEsRateInPes
Controls whether to include the ES Rate field in the PES header.
|
| M2tsForceTsVideoEbpOrder
Keep the default value (DEFAULT) unless you know that your audio EBP markers are incorrectly appearing before your
video EBP markers.
|
| M2tsNielsenId3
If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag
will be inserted in the output.
|
| M2tsPcrControl
When set to PCR_EVERY_PES_PACKET, a Program Clock Reference value is inserted for every Packetized Elementary Stream
(PES) header.
|
| M2tsRateMode
When set to CBR, inserts null packets into transport stream to fill specified bitrate.
|
| M2tsScte35Esam
Settings for SCTE-35 signals from ESAM.
|
| M2tsScte35Source
For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in
your input to also appear in this output.
|
| M2tsSegmentationMarkers
Inserts segmentation markers at each segmentation_time period.
|
| M2tsSegmentationStyle
The segmentation style parameter controls how segmentation markers are inserted into the transport stream.
|
| M2tsSettings
MPEG-2 TS container settings.
|
| M3u8NielsenId3
If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag
will be inserted in the output.
|
| M3u8PcrControl
When set to PCR_EVERY_PES_PACKET a Program Clock Reference value is inserted for every Packetized Elementary Stream
(PES) header.
|
| M3u8Scte35Source
For SCTE-35 markers from your input-- Choose Passthrough (PASSTHROUGH) if you want SCTE-35 markers that appear in
your input to also appear in this output.
|
| M3u8Settings
Settings for TS segments in HLS
|
| MotionImageInserter
Overlay motion graphics on top of your video at the time that you specify.
|
| MotionImageInsertionFramerate
For motion overlays that don't have a built-in frame rate, specify the frame rate of the overlay in frames per
second, as a fraction.
|
| MotionImageInsertionMode
Choose the type of motion graphic asset that you are providing for your overlay.
|
| MotionImageInsertionOffset
Specify the offset between the upper-left corner of the video frame and the top left corner of the overlay.
|
| MotionImagePlayback
Specify whether your motion graphic overlay repeats on a loop or plays only once.
|
| MovClapAtom
When enabled, include 'clap' atom if appropriate for the video output settings.
|
| MovCslgAtom
When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample)
box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1
amendment 1.
|
| MovMpeg2FourCCControl
When set to XDCAM, writes MPEG2 video streams into the QuickTime file using XDCAM fourcc codes.
|
| MovPaddingControl
If set to OMNEON, inserts Omneon-compatible padding
|
| MovReference
Always keep the default value (SELF_CONTAINED) for this setting.
|
| MovSettings
Settings for MOV Container.
|
| Mp2Settings
Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value MP2.
|
| Mp3RateControlMode
Specify whether the service encodes this MP3 audio output with a constant bitrate (CBR) or a variable bitrate (VBR).
|
| Mp3Settings
Required when you set Codec, under AudioDescriptions>CodecSettings, to the value MP3.
|
| Mp4CslgAtom
When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample)
box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1
amendment 1.
|
| Mp4FreeSpaceBox
Inserts a free-space box immediately after the moov box.
|
| Mp4MoovPlacement
If set to PROGRESSIVE_DOWNLOAD, the MOOV atom is relocated to the beginning of the archive as required for
progressive downloading.
|
| Mp4Settings
Settings for MP4 container.
|
| MpdCaptionContainerType
Use this setting only in DASH output groups that include sidecar TTML or IMSC captions.
|
| MpdScte35Esam
Use this setting only when you specify SCTE-35 markers from ESAM.
|
| MpdScte35Source
Ignore this setting unless you have SCTE-35 markers in your input video file.
|
| MpdSettings
Settings for MP4 segments in DASH
|
| Mpeg2AdaptiveQuantization
Adaptive quantization.
|
| Mpeg2CodecLevel
Use Level (Mpeg2CodecLevel) to set the MPEG-2 level for the video output.
|
| Mpeg2CodecProfile
Use Profile (Mpeg2CodecProfile) to set the MPEG-2 profile for the video output.
|
| Mpeg2DynamicSubGop
Choose Adaptive to improve subjective video quality for high-motion content.
|
| Mpeg2FramerateControl
If you are using the console, use the Framerate setting to specify the frame rate for this output.
|
| Mpeg2FramerateConversionAlgorithm
When set to INTERPOLATE, produces smoother motion during frame rate conversion.
|
| Mpeg2GopSizeUnits
Indicates if the GOP Size in MPEG2 is specified in frames or seconds.
|
| Mpeg2InterlaceMode
Use Interlace mode (InterlaceMode) to choose the scan line type for the output.
|
| Mpeg2IntraDcPrecision
Use Intra DC precision (Mpeg2IntraDcPrecision) to set quantization precision for intra-block DC coefficients.
|
| Mpeg2ParControl
Using the API, enable ParFollowSource if you want the service to use the pixel aspect ratio from the input.
|
| Mpeg2QualityTuningLevel
Use Quality tuning level (Mpeg2QualityTuningLevel) to specifiy whether to use single-pass or multipass video
encoding.
|
| Mpeg2RateControlMode
Use Rate control mode (Mpeg2RateControlMode) to specifiy whether the bitrate is variable (vbr) or constant (cbr).
|
| Mpeg2SceneChangeDetect
Enable this setting to insert I-frames at scene changes that the service automatically detects.
|
| Mpeg2Settings
Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value MPEG2.
|
| Mpeg2SlowPal
Enables Slow PAL rate conversion.
|
| Mpeg2SpatialAdaptiveQuantization
Adjust quantization within each frame based on spatial variation of content complexity.
|
| Mpeg2Syntax
Produces a Type D-10 compatible bitstream (SMPTE 356M-2001).
|
| Mpeg2Telecine
Only use Telecine (Mpeg2Telecine) when you set Framerate (Framerate) to 29.970.
|
| Mpeg2TemporalAdaptiveQuantization
Adjust quantization within each frame based on temporal variation of content complexity.
|
| MsSmoothAdditionalManifest
Specify the details for each additional Microsoft Smooth Streaming manifest that you want the service to generate for
this output group.
|
| MsSmoothAudioDeduplication
COMBINE_DUPLICATE_STREAMS combines identical audio encoding settings across a Microsoft Smooth output group into a
single audio stream.
|
| MsSmoothEncryptionSettings
If you are using DRM, set DRM System (MsSmoothEncryptionSettings) to specify the value SpekeKeyProvider.
|
| MsSmoothGroupSettings
Required when you set (Type) under (OutputGroups)>(OutputGroupSettings) to MS_SMOOTH_GROUP_SETTINGS.
|
| MsSmoothManifestEncoding
Use Manifest encoding (MsSmoothManifestEncoding) to specify the encoding format for the server and client manifest.
|
| MxfAfdSignaling
Optional.
|
| MxfSettings
MXF settings
|
| NielsenConfiguration
Settings for your Nielsen configuration.
|
| NoiseReducer
Enable the Noise reducer (NoiseReducer) feature to remove noise from your video output if necessary.
|
| NoiseReducerFilter
Use Noise reducer filter (NoiseReducerFilter) to select one of the following spatial image filtering functions.
|
| NoiseReducerFilterSettings
Settings for a noise reducer filter
|
| NoiseReducerSpatialFilterSettings
Noise reducer filter settings for spatial filter.
|
| NoiseReducerTemporalFilterSettings
Noise reducer filter settings for temporal filter.
|
| Order
Optional.
|
| Output
An output object describes the settings for a single output file or stream in an output group.
|
| OutputChannelMapping
OutputChannel mapping settings.
|
| OutputDetail
Details regarding output
|
| OutputGroup
Group of outputs
|
| OutputGroupDetail
Contains details about the output groups specified in the job settings.
|
| OutputGroupSettings
Output Group settings, including type
|
| OutputGroupType
Type of output group (File group, Apple HLS, DASH ISO, Microsoft Smooth Streaming, CMAF)
|
| OutputSdt
Selects method of inserting SDT information into output stream.
|
| OutputSettings
Specific settings for this type of output.
|
| Preset
A preset is a collection of preconfigured media conversion settings that you want MediaConvert to apply to the output
during the conversion process.
|
| PresetListBy
Optional.
|
| PresetSettings
Settings for preset
|
| PricingPlan
Specifies whether the pricing plan for the queue is on-demand or reserved.
|
| ProresCodecProfile
Use Profile (ProResCodecProfile) to specifiy the type of Apple ProRes codec to use for this output.
|
| ProresFramerateControl
If you are using the console, use the Framerate setting to specify the frame rate for this output.
|
| ProresFramerateConversionAlgorithm
When set to INTERPOLATE, produces smoother motion during frame rate conversion.
|
| ProresInterlaceMode
Use Interlace mode (InterlaceMode) to choose the scan line type for the output.
|
| ProresParControl
Use (ProresParControl) to specify how the service determines the pixel aspect ratio.
|
| ProresSettings
Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value PRORES.
|
| ProresSlowPal
Enables Slow PAL rate conversion.
|
| ProresTelecine
Only use Telecine (ProresTelecine) when you set Framerate (Framerate) to 29.970.
|
| Queue
You can use queues to manage the resources that are available to your AWS account for running multiple transcoding
jobs at the same time.
|
| QueueListBy
Optional.
|
| QueueStatus
Queues can be ACTIVE or PAUSED.
|
| QueueTransition
Description of the source and destination queues between which the job has moved, along with the timestamp of the
move
|
| Rectangle
Use Rectangle to identify a specific area of the video frame.
|
| RemixSettings
Use Manual audio remixing (RemixSettings) to adjust audio levels for each audio channel in each output of your job.
|
| RenewalType
Specifies whether the term of your reserved queue pricing plan is automatically extended (AUTO_RENEW) or expires
(EXPIRE) at the end of the term.
|
| ReservationPlan
Details about the pricing plan for your reserved queue.
|
| ReservationPlanSettings
Details about the pricing plan for your reserved queue.
|
| ReservationPlanStatus
Specifies whether the pricing plan for your reserved queue is ACTIVE or EXPIRED.
|
| ResourceTags
The Amazon Resource Name (ARN) and tags for an AWS Elemental MediaConvert resource.
|
| RespondToAfd
Use Respond to AFD (RespondToAfd) to specify how the service changes the video itself in response to AFD values in
the input.
|
| S3DestinationAccessControl
Optional.
|
| S3DestinationSettings
Settings associated with S3 destination
|
| S3EncryptionSettings
Settings for how your job outputs are encrypted as they are uploaded to Amazon S3.
|
| S3ObjectCannedAcl
Choose an Amazon S3 canned ACL for MediaConvert to apply to this output.
|
| S3ServerSideEncryptionType
Specify how you want your data keys managed.
|
| ScalingBehavior
Specify how the service handles outputs that have a different aspect ratio from the input aspect ratio.
|
| SccDestinationFramerate
Set Framerate (SccDestinationFramerate) to make sure that the captions and the video are synchronized in the output.
|
| SccDestinationSettings
Settings for SCC caption output.
|
| SimulateReservedQueue
Enable this setting when you run a test job to estimate how many reserved transcoding slots (RTS) you need.
|
| SpekeKeyProvider
If your output group type is HLS, DASH, or Microsoft Smooth, use these settings when doing DRM encryption with a
SPEKE-compliant key provider.
|
| SpekeKeyProviderCmaf
If your output group type is CMAF, use these settings when doing DRM encryption with a SPEKE-compliant key provider.
|
| StaticKeyProvider
Use these settings to set up encryption with a static key provider.
|
| StatusUpdateInterval
Specify how often MediaConvert sends STATUS_UPDATE events to Amazon CloudWatch Events.
|
| TagResourceRequest |
| TagResourceResult |
| TeletextDestinationSettings
Settings for Teletext caption output
|
| TeletextPageType
A page type as defined in the standard ETSI EN 300 468, Table 94
|
| TeletextSourceSettings
Settings specific to Teletext caption sources, including Page number.
|
| TimecodeBurnin
Timecode burn-in (TimecodeBurnIn)--Burns the output timecode and specified prefix into the output.
|
| TimecodeBurninPosition
Use Position (Position) under under Timecode burn-in (TimecodeBurnIn) to specify the location the burned-in timecode
on output video.
|
| TimecodeConfig
These settings control how the service handles timecodes throughout the job.
|
| TimecodeSource
Use Source (TimecodeSource) to set how timecodes are handled within this job.
|
| TimedMetadata
Applies only to HLS outputs.
|
| TimedMetadataInsertion
Enable Timed metadata insertion (TimedMetadataInsertion) to include ID3 tags in your job.
|
| Timing
Information about when jobs are submitted, started, and finished is specified in Unix epoch format in seconds.
|
| TrackSourceSettings
Settings specific to caption sources that are specified by track number.
|
| TtmlDestinationSettings
Settings specific to TTML caption outputs, including Pass style information (TtmlStylePassthrough).
|
| TtmlStylePassthrough
Pass through style and position information from a TTML-like input source (TTML, SMPTE-TT) to the TTML output.
|
| Type |
| UntagResourceRequest |
| UntagResourceResult |
| UpdateJobTemplateRequest |
| UpdateJobTemplateResult |
| UpdatePresetRequest |
| UpdatePresetResult |
| UpdateQueueRequest |
| UpdateQueueResult |
| VideoCodec
Type of video codec
|
| VideoCodecSettings
Video codec settings, (CodecSettings) under (VideoDescription), contains the group of settings related to video
encoding.
|
| VideoDescription
Settings for video outputs
|
| VideoDetail
Contains details about the output's video stream
|
| VideoPreprocessor
Find additional transcoding features under Preprocessors (VideoPreprocessors).
|
| VideoSelector
Selector for video.
|
| VideoTimecodeInsertion
Applies only to H.264, H.265, MPEG2, and ProRes outputs.
|
| WavFormat
The service defaults to using RIFF for WAV outputs.
|
| WavSettings
Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value WAV.
|
Copyright © 2020. All rights reserved.