@Generated(value="com.amazonaws:aws-java-sdk-code-generator") public interface AWSOpsWorksCM
Note: Do not directly implement this interface, new methods are added to it regularly. Extend from
AbstractAWSOpsWorksCM instead.
AWS OpsWorks for configuration management (CM) is a service that runs and manages configuration management servers. You can use AWS OpsWorks CM to create and manage AWS OpsWorks for Chef Automate and AWS OpsWorks for Puppet Enterprise servers, and add or remove nodes for the servers to manage.
Glossary of terms
Server: A configuration management server that can be highly-available. The configuration management server runs on an Amazon Elastic Compute Cloud (EC2) instance, and may use various other AWS services, such as Amazon Relational Database Service (RDS) and Elastic Load Balancing. A server is a generic abstraction over the configuration manager that you want to use, much like Amazon RDS. In AWS OpsWorks CM, you do not start or stop servers. After you create servers, they continue to run until they are deleted.
Engine: The engine is the specific configuration manager that you want to use. Valid values in this release
include ChefAutomate and Puppet.
Backup: This is an application-level backup of the data that the configuration manager stores. AWS OpsWorks CM creates an S3 bucket for backups when you launch the first server. A backup maintains a snapshot of a server's configuration-related attributes at the time the backup starts.
Events: Events are always related to a server. Events are written during server creation, when health checks run, when backups are created, when system maintenance is performed, etc. When you delete a server, the server's events are also deleted.
Account attributes: Every account has attributes that are assigned in the AWS OpsWorks CM database. These attributes store information about configuration limits (servers, backups, etc.) and your customer account.
Endpoints
AWS OpsWorks CM supports the following endpoints, all HTTPS. You must connect to one of the following endpoints. Your servers can only be accessed or managed within the endpoint in which they are created.
opsworks-cm.us-east-1.amazonaws.com
opsworks-cm.us-east-2.amazonaws.com
opsworks-cm.us-west-1.amazonaws.com
opsworks-cm.us-west-2.amazonaws.com
opsworks-cm.ap-northeast-1.amazonaws.com
opsworks-cm.ap-southeast-1.amazonaws.com
opsworks-cm.ap-southeast-2.amazonaws.com
opsworks-cm.eu-central-1.amazonaws.com
opsworks-cm.eu-west-1.amazonaws.com
For more information, see AWS OpsWorks endpoints and quotas in the AWS General Reference.
Throttling limits
All API operations allow for five requests per second with a burst of 10 requests per second.
| Modifier and Type | Field and Description |
|---|---|
static String |
ENDPOINT_PREFIX
The region metadata service name for computing region endpoints.
|
| Modifier and Type | Method and Description |
|---|---|
AssociateNodeResult |
associateNode(AssociateNodeRequest associateNodeRequest)
Associates a new node with the server.
|
CreateBackupResult |
createBackup(CreateBackupRequest createBackupRequest)
Creates an application-level backup of a server.
|
CreateServerResult |
createServer(CreateServerRequest createServerRequest)
Creates and immedately starts a new server.
|
DeleteBackupResult |
deleteBackup(DeleteBackupRequest deleteBackupRequest)
Deletes a backup.
|
DeleteServerResult |
deleteServer(DeleteServerRequest deleteServerRequest)
Deletes the server and the underlying AWS CloudFormation stacks (including the server's EC2 instance).
|
DescribeAccountAttributesResult |
describeAccountAttributes(DescribeAccountAttributesRequest describeAccountAttributesRequest)
Describes your OpsWorks-CM account attributes.
|
DescribeBackupsResult |
describeBackups(DescribeBackupsRequest describeBackupsRequest)
Describes backups.
|
DescribeEventsResult |
describeEvents(DescribeEventsRequest describeEventsRequest)
Describes events for a specified server.
|
DescribeNodeAssociationStatusResult |
describeNodeAssociationStatus(DescribeNodeAssociationStatusRequest describeNodeAssociationStatusRequest)
Returns the current status of an existing association or disassociation request.
|
DescribeServersResult |
describeServers(DescribeServersRequest describeServersRequest)
Lists all configuration management servers that are identified with your account.
|
DisassociateNodeResult |
disassociateNode(DisassociateNodeRequest disassociateNodeRequest)
Disassociates a node from an AWS OpsWorks CM server, and removes the node from the server's managed nodes.
|
ExportServerEngineAttributeResult |
exportServerEngineAttribute(ExportServerEngineAttributeRequest exportServerEngineAttributeRequest)
Exports a specified server engine attribute as a base64-encoded string.
|
ResponseMetadata |
getCachedResponseMetadata(AmazonWebServiceRequest request)
Returns additional metadata for a previously executed successful request, typically used for debugging issues
where a service isn't acting as expected.
|
ListTagsForResourceResult |
listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)
Returns a list of tags that are applied to the specified AWS OpsWorks for Chef Automate or AWS OpsWorks for
Puppet Enterprise servers or backups.
|
RestoreServerResult |
restoreServer(RestoreServerRequest restoreServerRequest)
Restores a backup to a server that is in a
CONNECTION_LOST, HEALTHY,
RUNNING, UNHEALTHY, or TERMINATED state. |
void |
setEndpoint(String endpoint)
Deprecated.
use
AwsClientBuilder#setEndpointConfiguration(AwsClientBuilder.EndpointConfiguration) for
example:
builder.setEndpointConfiguration(new EndpointConfiguration(endpoint, signingRegion)); |
void |
setRegion(Region region)
Deprecated.
use
AwsClientBuilder#setRegion(String) |
void |
shutdown()
Shuts down this client object, releasing any resources that might be held open.
|
StartMaintenanceResult |
startMaintenance(StartMaintenanceRequest startMaintenanceRequest)
Manually starts server maintenance.
|
TagResourceResult |
tagResource(TagResourceRequest tagResourceRequest)
Applies tags to an AWS OpsWorks for Chef Automate or AWS OpsWorks for Puppet Enterprise server, or to server
backups.
|
UntagResourceResult |
untagResource(UntagResourceRequest untagResourceRequest)
Removes specified tags from an AWS OpsWorks-CM server or backup.
|
UpdateServerResult |
updateServer(UpdateServerRequest updateServerRequest)
Updates settings for a server.
|
UpdateServerEngineAttributesResult |
updateServerEngineAttributes(UpdateServerEngineAttributesRequest updateServerEngineAttributesRequest)
Updates engine-specific attributes on a specified server.
|
AWSOpsWorksCMWaiters |
waiters() |
static final String ENDPOINT_PREFIX
@Deprecated void setEndpoint(String endpoint)
AwsClientBuilder#setEndpointConfiguration(AwsClientBuilder.EndpointConfiguration) for
example:
builder.setEndpointConfiguration(new EndpointConfiguration(endpoint, signingRegion));
Callers can pass in just the endpoint (ex: "opsworks-cm.us-east-1.amazonaws.com") or a full URL, including the
protocol (ex: "opsworks-cm.us-east-1.amazonaws.com"). If the protocol is not specified here, the default protocol
from this client's ClientConfiguration will be used, which by default is HTTPS.
For more information on using AWS regions with the AWS SDK for Java, and a complete list of all available endpoints for all AWS services, see: https://docs.aws.amazon.com/sdk-for-java/v1/developer-guide/java-dg-region-selection.html#region-selection- choose-endpoint
This method is not threadsafe. An endpoint should be configured when the client is created and before any service requests are made. Changing it afterwards creates inevitable race conditions for any service requests in transit or retrying.
endpoint - The endpoint (ex: "opsworks-cm.us-east-1.amazonaws.com") or a full URL, including the protocol (ex:
"opsworks-cm.us-east-1.amazonaws.com") of the region specific AWS endpoint this client will communicate
with.@Deprecated void setRegion(Region region)
AwsClientBuilder#setRegion(String)setEndpoint(String), sets the regional endpoint for this client's service
calls. Callers can use this method to control which AWS region they want to work with.
By default, all service endpoints in all regions use the https protocol. To use http instead, specify it in the
ClientConfiguration supplied at construction.
This method is not threadsafe. A region should be configured when the client is created and before any service requests are made. Changing it afterwards creates inevitable race conditions for any service requests in transit or retrying.
region - The region this client will communicate with. See Region.getRegion(com.amazonaws.regions.Regions)
for accessing a given region. Must not be null and must be a region where the service is available.Region.getRegion(com.amazonaws.regions.Regions),
Region.createClient(Class, com.amazonaws.auth.AWSCredentialsProvider, ClientConfiguration),
Region.isServiceSupported(String)AssociateNodeResult associateNode(AssociateNodeRequest associateNodeRequest)
Associates a new node with the server. For more information about how to disassociate a node, see DisassociateNode.
On a Chef server: This command is an alternative to knife bootstrap.
Example (Chef):
aws opsworks-cm associate-node --server-name MyServer --node-name MyManagedNode --engine-attributes "Name=CHEF_ORGANIZATION,Value=default" "Name=CHEF_NODE_PUBLIC_KEY,Value=public-key-pem"
On a Puppet server, this command is an alternative to the puppet cert sign command that signs a
Puppet node CSR.
Example (Puppet):
aws opsworks-cm associate-node --server-name MyServer --node-name MyManagedNode --engine-attributes "Name=PUPPET_NODE_CSR,Value=csr-pem"
A node can can only be associated with servers that are in a HEALTHY state. Otherwise, an
InvalidStateException is thrown. A ResourceNotFoundException is thrown when the server
does not exist. A ValidationException is raised when parameters of the request are not valid. The
AssociateNode API call can be integrated into Auto Scaling configurations, AWS Cloudformation templates, or the
user data of a server's instance.
associateNodeRequest - InvalidStateException - The resource is in a state that does not allow you to perform a specified action.ResourceNotFoundException - The requested resource does not exist, or access was denied.ValidationException - One or more of the provided request parameters are not valid.CreateBackupResult createBackup(CreateBackupRequest createBackupRequest)
Creates an application-level backup of a server. While the server is in the BACKING_UP state, the
server cannot be changed, and no additional backup can be created.
Backups can be created for servers in RUNNING, HEALTHY, and UNHEALTHY
states. By default, you can create a maximum of 50 manual backups.
This operation is asynchronous.
A LimitExceededException is thrown when the maximum number of manual backups is reached. An
InvalidStateException is thrown when the server is not in any of the following states: RUNNING,
HEALTHY, or UNHEALTHY. A ResourceNotFoundException is thrown when the server is not found. A
ValidationException is thrown when parameters of the request are not valid.
createBackupRequest - InvalidStateException - The resource is in a state that does not allow you to perform a specified action.LimitExceededException - The limit of servers or backups has been reached.ResourceNotFoundException - The requested resource does not exist, or access was denied.ValidationException - One or more of the provided request parameters are not valid.CreateServerResult createServer(CreateServerRequest createServerRequest)
Creates and immedately starts a new server. The server is ready to use when it is in the HEALTHY
state. By default, you can create a maximum of 10 servers.
This operation is asynchronous.
A LimitExceededException is thrown when you have created the maximum number of servers (10). A
ResourceAlreadyExistsException is thrown when a server with the same name already exists in the
account. A ResourceNotFoundException is thrown when you specify a backup ID that is not valid or is
for a backup that does not exist. A ValidationException is thrown when parameters of the request are
not valid.
If you do not specify a security group by adding the SecurityGroupIds parameter, AWS OpsWorks
creates a new security group.
Chef Automate: The default security group opens the Chef server to the world on TCP port 443. If a KeyName is present, AWS OpsWorks enables SSH access. SSH is also open to the world on TCP port 22.
Puppet Enterprise: The default security group opens TCP ports 22, 443, 4433, 8140, 8142, 8143, and 8170. If a KeyName is present, AWS OpsWorks enables SSH access. SSH is also open to the world on TCP port 22.
By default, your server is accessible from any IP address. We recommend that you update your security group rules to allow access from known IP addresses and address ranges only. To edit security group rules, open Security Groups in the navigation pane of the EC2 management console.
To specify your own domain for a server, and provide your own self-signed or CA-signed certificate and private
key, specify values for CustomDomain, CustomCertificate, and
CustomPrivateKey.
createServerRequest - LimitExceededException - The limit of servers or backups has been reached.ResourceAlreadyExistsException - The requested resource cannot be created because it already exists.ResourceNotFoundException - The requested resource does not exist, or access was denied.ValidationException - One or more of the provided request parameters are not valid.DeleteBackupResult deleteBackup(DeleteBackupRequest deleteBackupRequest)
Deletes a backup. You can delete both manual and automated backups. This operation is asynchronous.
An InvalidStateException is thrown when a backup deletion is already in progress. A
ResourceNotFoundException is thrown when the backup does not exist. A
ValidationException is thrown when parameters of the request are not valid.
deleteBackupRequest - InvalidStateException - The resource is in a state that does not allow you to perform a specified action.ResourceNotFoundException - The requested resource does not exist, or access was denied.ValidationException - One or more of the provided request parameters are not valid.DeleteServerResult deleteServer(DeleteServerRequest deleteServerRequest)
Deletes the server and the underlying AWS CloudFormation stacks (including the server's EC2 instance). When you
run this command, the server state is updated to DELETING. After the server is deleted, it is no
longer returned by DescribeServer requests. If the AWS CloudFormation stack cannot be deleted, the
server cannot be deleted.
This operation is asynchronous.
An InvalidStateException is thrown when a server deletion is already in progress. A
ResourceNotFoundException is thrown when the server does not exist. A
ValidationException is raised when parameters of the request are not valid.
deleteServerRequest - InvalidStateException - The resource is in a state that does not allow you to perform a specified action.ResourceNotFoundException - The requested resource does not exist, or access was denied.ValidationException - One or more of the provided request parameters are not valid.DescribeAccountAttributesResult describeAccountAttributes(DescribeAccountAttributesRequest describeAccountAttributesRequest)
Describes your OpsWorks-CM account attributes.
This operation is synchronous.
describeAccountAttributesRequest - DescribeBackupsResult describeBackups(DescribeBackupsRequest describeBackupsRequest)
Describes backups. The results are ordered by time, with newest backups first. If you do not specify a BackupId or ServerName, the command returns all backups.
This operation is synchronous.
A ResourceNotFoundException is thrown when the backup does not exist. A
ValidationException is raised when parameters of the request are not valid.
describeBackupsRequest - ValidationException - One or more of the provided request parameters are not valid.ResourceNotFoundException - The requested resource does not exist, or access was denied.InvalidNextTokenException - This occurs when the provided nextToken is not valid.DescribeEventsResult describeEvents(DescribeEventsRequest describeEventsRequest)
Describes events for a specified server. Results are ordered by time, with newest events first.
This operation is synchronous.
A ResourceNotFoundException is thrown when the server does not exist. A
ValidationException is raised when parameters of the request are not valid.
describeEventsRequest - ValidationException - One or more of the provided request parameters are not valid.InvalidNextTokenException - This occurs when the provided nextToken is not valid.ResourceNotFoundException - The requested resource does not exist, or access was denied.DescribeNodeAssociationStatusResult describeNodeAssociationStatus(DescribeNodeAssociationStatusRequest describeNodeAssociationStatusRequest)
Returns the current status of an existing association or disassociation request.
A ResourceNotFoundException is thrown when no recent association or disassociation request with the
specified token is found, or when the server does not exist. A ValidationException is raised when
parameters of the request are not valid.
describeNodeAssociationStatusRequest - ResourceNotFoundException - The requested resource does not exist, or access was denied.ValidationException - One or more of the provided request parameters are not valid.DescribeServersResult describeServers(DescribeServersRequest describeServersRequest)
Lists all configuration management servers that are identified with your account. Only the stored results from Amazon DynamoDB are returned. AWS OpsWorks CM does not query other services.
This operation is synchronous.
A ResourceNotFoundException is thrown when the server does not exist. A
ValidationException is raised when parameters of the request are not valid.
describeServersRequest - ValidationException - One or more of the provided request parameters are not valid.ResourceNotFoundException - The requested resource does not exist, or access was denied.InvalidNextTokenException - This occurs when the provided nextToken is not valid.DisassociateNodeResult disassociateNode(DisassociateNodeRequest disassociateNodeRequest)
Disassociates a node from an AWS OpsWorks CM server, and removes the node from the server's managed nodes. After a node is disassociated, the node key pair is no longer valid for accessing the configuration manager's API. For more information about how to associate a node, see AssociateNode.
A node can can only be disassociated from a server that is in a HEALTHY state. Otherwise, an
InvalidStateException is thrown. A ResourceNotFoundException is thrown when the server
does not exist. A ValidationException is raised when parameters of the request are not valid.
disassociateNodeRequest - InvalidStateException - The resource is in a state that does not allow you to perform a specified action.ResourceNotFoundException - The requested resource does not exist, or access was denied.ValidationException - One or more of the provided request parameters are not valid.ExportServerEngineAttributeResult exportServerEngineAttribute(ExportServerEngineAttributeRequest exportServerEngineAttributeRequest)
Exports a specified server engine attribute as a base64-encoded string. For example, you can export user data that you can use in EC2 to associate nodes with a server.
This operation is synchronous.
A ValidationException is raised when parameters of the request are not valid. A
ResourceNotFoundException is thrown when the server does not exist. An
InvalidStateException is thrown when the server is in any of the following states: CREATING,
TERMINATED, FAILED or DELETING.
exportServerEngineAttributeRequest - ValidationException - One or more of the provided request parameters are not valid.ResourceNotFoundException - The requested resource does not exist, or access was denied.InvalidStateException - The resource is in a state that does not allow you to perform a specified action.ListTagsForResourceResult listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)
Returns a list of tags that are applied to the specified AWS OpsWorks for Chef Automate or AWS OpsWorks for Puppet Enterprise servers or backups.
listTagsForResourceRequest - ResourceNotFoundException - The requested resource does not exist, or access was denied.ValidationException - One or more of the provided request parameters are not valid.RestoreServerResult restoreServer(RestoreServerRequest restoreServerRequest)
Restores a backup to a server that is in a CONNECTION_LOST, HEALTHY,
RUNNING, UNHEALTHY, or TERMINATED state. When you run RestoreServer, the
server's EC2 instance is deleted, and a new EC2 instance is configured. RestoreServer maintains the existing
server endpoint, so configuration management of the server's client devices (nodes) should continue to work.
Restoring from a backup is performed by creating a new EC2 instance. If restoration is successful, and the server
is in a HEALTHY state, AWS OpsWorks CM switches traffic over to the new instance. After restoration
is finished, the old EC2 instance is maintained in a Running or Stopped state, but is
eventually terminated.
This operation is asynchronous.
An InvalidStateException is thrown when the server is not in a valid state. A
ResourceNotFoundException is thrown when the server does not exist. A
ValidationException is raised when parameters of the request are not valid.
restoreServerRequest - InvalidStateException - The resource is in a state that does not allow you to perform a specified action.ResourceNotFoundException - The requested resource does not exist, or access was denied.ValidationException - One or more of the provided request parameters are not valid.StartMaintenanceResult startMaintenance(StartMaintenanceRequest startMaintenanceRequest)
Manually starts server maintenance. This command can be useful if an earlier maintenance attempt failed, and the
underlying cause of maintenance failure has been resolved. The server is in an UNDER_MAINTENANCE
state while maintenance is in progress.
Maintenance can only be started on servers in HEALTHY and UNHEALTHY states. Otherwise,
an InvalidStateException is thrown. A ResourceNotFoundException is thrown when the
server does not exist. A ValidationException is raised when parameters of the request are not valid.
startMaintenanceRequest - InvalidStateException - The resource is in a state that does not allow you to perform a specified action.ResourceNotFoundException - The requested resource does not exist, or access was denied.ValidationException - One or more of the provided request parameters are not valid.TagResourceResult tagResource(TagResourceRequest tagResourceRequest)
Applies tags to an AWS OpsWorks for Chef Automate or AWS OpsWorks for Puppet Enterprise server, or to server backups.
tagResourceRequest - ResourceNotFoundException - The requested resource does not exist, or access was denied.ValidationException - One or more of the provided request parameters are not valid.InvalidStateException - The resource is in a state that does not allow you to perform a specified action.UntagResourceResult untagResource(UntagResourceRequest untagResourceRequest)
Removes specified tags from an AWS OpsWorks-CM server or backup.
untagResourceRequest - ResourceNotFoundException - The requested resource does not exist, or access was denied.ValidationException - One or more of the provided request parameters are not valid.InvalidStateException - The resource is in a state that does not allow you to perform a specified action.UpdateServerResult updateServer(UpdateServerRequest updateServerRequest)
Updates settings for a server.
This operation is synchronous.
updateServerRequest - InvalidStateException - The resource is in a state that does not allow you to perform a specified action.ResourceNotFoundException - The requested resource does not exist, or access was denied.ValidationException - One or more of the provided request parameters are not valid.UpdateServerEngineAttributesResult updateServerEngineAttributes(UpdateServerEngineAttributesRequest updateServerEngineAttributesRequest)
Updates engine-specific attributes on a specified server. The server enters the MODIFYING state when
this operation is in progress. Only one update can occur at a time. You can use this command to reset a Chef
server's public key (CHEF_PIVOTAL_KEY) or a Puppet server's admin password (
PUPPET_ADMIN_PASSWORD).
This operation is asynchronous.
This operation can only be called for servers in HEALTHY or UNHEALTHY states.
Otherwise, an InvalidStateException is raised. A ResourceNotFoundException is thrown
when the server does not exist. A ValidationException is raised when parameters of the request are
not valid.
updateServerEngineAttributesRequest - InvalidStateException - The resource is in a state that does not allow you to perform a specified action.ResourceNotFoundException - The requested resource does not exist, or access was denied.ValidationException - One or more of the provided request parameters are not valid.void shutdown()
ResponseMetadata getCachedResponseMetadata(AmazonWebServiceRequest request)
Response metadata is only cached for a limited period of time, so if you need to access this extra diagnostic information for an executed request, you should use this method to retrieve it as soon as possible after executing a request.
request - The originally executed request.AWSOpsWorksCMWaiters waiters()
Copyright © 2024. All rights reserved.