Package com.datastax.oss.pulsar.jms

Class PulsarMessage

java.lang.Object
com.datastax.oss.pulsar.jms.PulsarMessage
All Implemented Interfaces:
javax.jms.Message
Direct Known Subclasses:
PulsarBytesMessage, PulsarMapMessage, PulsarObjectMessage, PulsarSimpleMessage, PulsarStreamMessage, PulsarTextMessage
public abstract class PulsarMessage extends Object implements javax.jms.Message

  • Field Details

    • writable

      protected boolean writable

    • properties

      protected final Map<String,String> properties

  • Constructor Details

    • PulsarMessage

      public PulsarMessage()

  • Method Details

    • getJMSMessageID

      public String getJMSMessageID() throws javax.jms.JMSException
      Gets the message ID.

      The JMSMessageID header field contains a value that uniquely identifies each message sent by a provider.

      When a message is sent, JMSMessageID can be ignored. When the send or publish method returns, it contains a provider-assigned value.

      A JMSMessageID is a String value that should function as a unique key for identifying messages in a historical repository. The exact scope of uniqueness is provider-defined. It should at least cover all messages for a specific installation of a provider, where an installation is some connected set of message routers.

      All JMSMessageID values must start with the prefix 'ID:'. Uniqueness of message ID values across different providers is not required.

      Since message IDs take some effort to create and increase a message's size, some JMS providers may be able to optimize message overhead if they are given a hint that the message ID is not used by an application. By calling the MessageProducer.setDisableMessageID method, a JMS client enables this potential optimization for all messages sent by that message producer. If the JMS provider accepts this hint, these messages must have the message ID set to null; if the provider ignores the hint, the message ID must be set to its normal unique value.

      Specified by:
      getJMSMessageID in interface javax.jms.Message
      Returns:
      the message ID
      Throws:
      javax.jms.JMSException - if the JMS provider fails to get the message ID due to some internal error.
      See Also:
      • Message.setJMSMessageID(String)
      • MessageProducer.setDisableMessageID(boolean)

    • setJMSMessageID

      public void setJMSMessageID(String id) throws javax.jms.JMSException
      Sets the message ID.

      This method is for use by JMS providers only to set this field when a message is sent. This message cannot be used by clients to configure the message ID. This method is public to allow a JMS provider to set this field when sending a message whose implementation is not its own.

      Specified by:
      setJMSMessageID in interface javax.jms.Message
      Parameters:
      id - the ID of the message
      Throws:
      javax.jms.JMSException - if the JMS provider fails to set the message ID due to some internal error.
      See Also:
      • Message.getJMSMessageID()

    • getJMSTimestamp

      public long getJMSTimestamp() throws javax.jms.JMSException
      Gets the message timestamp.

      The JMSTimestamp header field contains the time a message was handed off to a provider to be sent. It is not the time the message was actually transmitted, because the actual send may occur later due to transactions or other client-side queueing of messages.

      When a message is sent, JMSTimestamp is ignored. When the send or publish method returns, it contains a time value somewhere in the interval between the call and the return. The value is in the format of a normal millis time value in the Java programming language.

      Since timestamps take some effort to create and increase a message's size, some JMS providers may be able to optimize message overhead if they are given a hint that the timestamp is not used by an application. By calling the MessageProducer.setDisableMessageTimestamp method, a JMS client enables this potential optimization for all messages sent by that message producer. If the JMS provider accepts this hint, these messages must have the timestamp set to zero; if the provider ignores the hint, the timestamp must be set to its normal value.

      Specified by:
      getJMSTimestamp in interface javax.jms.Message
      Returns:
      the message timestamp
      Throws:
      javax.jms.JMSException - if the JMS provider fails to get the timestamp due to some internal error.
      See Also:
      • Message.setJMSTimestamp(long)
      • MessageProducer.setDisableMessageTimestamp(boolean)

    • setJMSTimestamp

      public void setJMSTimestamp(long timestamp) throws javax.jms.JMSException
      Sets the message timestamp.

      This method is for use by JMS providers only to set this field when a message is sent. This message cannot be used by clients to configure the message timestamp. This method is public to allow a JMS provider to set this field when sending a message whose implementation is not its own.

      Specified by:
      setJMSTimestamp in interface javax.jms.Message
      Parameters:
      timestamp - the timestamp for this message
      Throws:
      javax.jms.JMSException - if the JMS provider fails to set the timestamp due to some internal error.
      See Also:
      • Message.getJMSTimestamp()

    • getJMSCorrelationIDAsBytes

      public byte[] getJMSCorrelationIDAsBytes() throws javax.jms.JMSException
      Gets the correlation ID as an array of bytes for the message.

      The use of a byte[] value for JMSCorrelationID is non-portable.

      Specified by:
      getJMSCorrelationIDAsBytes in interface javax.jms.Message
      Returns:
      the correlation ID of a message as an array of bytes
      Throws:
      javax.jms.JMSException - if the JMS provider fails to get the correlation ID due to some internal error.
      See Also:
      • Message.setJMSCorrelationID(String)
      • Message.getJMSCorrelationID()
      • Message.setJMSCorrelationIDAsBytes(byte[])

    • setJMSCorrelationIDAsBytes

      public void setJMSCorrelationIDAsBytes(byte[] correlationID) throws javax.jms.JMSException
      Sets the correlation ID as an array of bytes for the message.

      The array is copied before the method returns, so future modifications to the array will not alter this message header.

      If a provider supports the native concept of correlation ID, a JMS client may need to assign specific JMSCorrelationID values to match those expected by native messaging clients. JMS providers without native correlation ID values are not required to support this method and its corresponding get method; their implementation may throw a java.lang.UnsupportedOperationException.

      The use of a byte[] value for JMSCorrelationID is non-portable.

      Specified by:
      setJMSCorrelationIDAsBytes in interface javax.jms.Message
      Parameters:
      correlationID - the correlation ID value as an array of bytes
      Throws:
      javax.jms.JMSException - if the JMS provider fails to set the correlation ID due to some internal error.
      See Also:
      • Message.setJMSCorrelationID(String)
      • Message.getJMSCorrelationID()
      • Message.getJMSCorrelationIDAsBytes()

    • setJMSCorrelationID

      public void setJMSCorrelationID(String correlationID) throws javax.jms.JMSException
      Sets the correlation ID for the message.

      A client can use the JMSCorrelationID header field to link one message with another. A typical use is to link a response message with its request message.

      JMSCorrelationID can hold one of the following:

      • A provider-specific message ID
      • An application-specific String
      • A provider-native byte[] value

      Since each message sent by a JMS provider is assigned a message ID value, it is convenient to link messages via message ID. All message ID values must start with the 'ID:' prefix.

      In some cases, an application (made up of several clients) needs to use an application-specific value for linking messages. For instance, an application may use JMSCorrelationID to hold a value referencing some external information. Application-specified values must not start with the 'ID:' prefix; this is reserved for provider-generated message ID values.

      If a provider supports the native concept of correlation ID, a JMS client may need to assign specific JMSCorrelationID values to match those expected by clients that do not use the JMS API. A byte[] value is used for this purpose. JMS providers without native correlation ID values are not required to support byte[] values. The use of a byte[] value for JMSCorrelationID is non-portable.

      Specified by:
      setJMSCorrelationID in interface javax.jms.Message
      Parameters:
      correlationID - the message ID of a message being referred to
      Throws:
      javax.jms.JMSException - if the JMS provider fails to set the correlation ID due to some internal error.
      See Also:
      • Message.getJMSCorrelationID()
      • Message.getJMSCorrelationIDAsBytes()
      • Message.setJMSCorrelationIDAsBytes(byte[])

    • getJMSCorrelationID

      public String getJMSCorrelationID() throws javax.jms.JMSException
      Gets the correlation ID for the message.

      This method is used to return correlation ID values that are either provider-specific message IDs or application-specific String values.

      Specified by:
      getJMSCorrelationID in interface javax.jms.Message
      Returns:
      the correlation ID of a message as a String
      Throws:
      javax.jms.JMSException - if the JMS provider fails to get the correlation ID due to some internal error.
      See Also:
      • Message.setJMSCorrelationID(String)
      • Message.getJMSCorrelationIDAsBytes()
      • Message.setJMSCorrelationIDAsBytes(byte[])

    • getJMSReplyTo

      public javax.jms.Destination getJMSReplyTo() throws javax.jms.JMSException
      Gets the Destination object to which a reply to this message should be sent.
      Specified by:
      getJMSReplyTo in interface javax.jms.Message
      Returns:
      Destination to which to send a response to this message
      Throws:
      javax.jms.JMSException - if the JMS provider fails to get the JMSReplyTo destination due to some internal error.
      See Also:
      • Message.setJMSReplyTo(Destination)

    • setJMSReplyTo

      public void setJMSReplyTo(javax.jms.Destination replyTo) throws javax.jms.JMSException
      Sets the Destination object to which a reply to this message should be sent.

      The JMSReplyTo header field contains the destination where a reply to the current message should be sent. If it is null, no reply is expected. The destination may be either a Queue object or a Topic object.

      Messages sent with a null JMSReplyTo value may be a notification of some event, or they may just be some data the sender thinks is of interest.

      Messages with a JMSReplyTo value typically expect a response. A response is optional; it is up to the client to decide. These messages are called requests. A message sent in response to a request is called a reply.

      In some cases a client may wish to match a request it sent earlier with a reply it has just received. The client can use the JMSCorrelationID header field for this purpose.

      Specified by:
      setJMSReplyTo in interface javax.jms.Message
      Parameters:
      replyTo - Destination to which to send a response to this message
      Throws:
      javax.jms.JMSException - if the JMS provider fails to set the JMSReplyTo destination due to some internal error.
      See Also:
      • Message.getJMSReplyTo()

    • getJMSDestination

      public javax.jms.Destination getJMSDestination() throws javax.jms.JMSException
      Gets the Destination object for this message.

      The JMSDestination header field contains the destination to which the message is being sent.

      When a message is sent, this field is ignored. After completion of the send or publish method, the field holds the destination specified by the method.

      When a message is received, its JMSDestination value must be equivalent to the value assigned when it was sent.

      Specified by:
      getJMSDestination in interface javax.jms.Message
      Returns:
      the destination of this message
      Throws:
      javax.jms.JMSException - if the JMS provider fails to get the destination due to some internal error.
      See Also:
      • Message.setJMSDestination(Destination)

    • setJMSDestination

      public void setJMSDestination(javax.jms.Destination destination) throws javax.jms.JMSException
      Sets the Destination object for this message.

      This method is for use by JMS providers only to set this field when a message is sent. This message cannot be used by clients to configure the destination of the message. This method is public to allow a JMS provider to set this field when sending a message whose implementation is not its own.

      Specified by:
      setJMSDestination in interface javax.jms.Message
      Parameters:
      destination - the destination for this message
      Throws:
      javax.jms.JMSException - if the JMS provider fails to set the destination due to some internal error.
      See Also:
      • Message.getJMSDestination()

    • getJMSDeliveryMode

      public int getJMSDeliveryMode() throws javax.jms.JMSException
      Gets the DeliveryMode value specified for this message.
      Specified by:
      getJMSDeliveryMode in interface javax.jms.Message
      Returns:
      the delivery mode for this message
      Throws:
      javax.jms.JMSException - if the JMS provider fails to get the delivery mode due to some internal error.
      See Also:
      • Message.setJMSDeliveryMode(int)
      • DeliveryMode

    • setJMSDeliveryMode

      public void setJMSDeliveryMode(int deliveryMode) throws javax.jms.JMSException
      Sets the DeliveryMode value for this message.

      This method is for use by JMS providers only to set this field when a message is sent. This message cannot be used by clients to configure the delivery mode of the message. This method is public to allow a JMS provider to set this field when sending a message whose implementation is not its own.

      Specified by:
      setJMSDeliveryMode in interface javax.jms.Message
      Parameters:
      deliveryMode - the delivery mode for this message
      Throws:
      javax.jms.JMSException - if the JMS provider fails to set the delivery mode due to some internal error.
      See Also:
      • Message.getJMSDeliveryMode()
      • DeliveryMode

    • getJMSRedelivered

      public boolean getJMSRedelivered() throws javax.jms.JMSException
      Gets an indication of whether this message is being redelivered.

      If a client receives a message with the JMSRedelivered field set, it is likely, but not guaranteed, that this message was delivered earlier but that its receipt was not acknowledged at that time.

      Specified by:
      getJMSRedelivered in interface javax.jms.Message
      Returns:
      true if this message is being redelivered
      Throws:
      javax.jms.JMSException - if the JMS provider fails to get the redelivered state due to some internal error.
      See Also:
      • Message.setJMSRedelivered(boolean)

    • setJMSRedelivered

      public void setJMSRedelivered(boolean redelivered) throws javax.jms.JMSException
      Specifies whether this message is being redelivered.

      This method is for use by JMS providers only to set this field when a message is delivered. This message cannot be used by clients to configure the redelivered status of the message. This method is public to allow a JMS provider to set this field when sending a message whose implementation is not its own.

      Specified by:
      setJMSRedelivered in interface javax.jms.Message
      Parameters:
      redelivered - an indication of whether this message is being redelivered
      Throws:
      javax.jms.JMSException - if the JMS provider fails to set the redelivered state due to some internal error.
      See Also:
      • Message.getJMSRedelivered()

    • getJMSType

      public String getJMSType() throws javax.jms.JMSException
      Gets the message type identifier supplied by the client when the message was sent.
      Specified by:
      getJMSType in interface javax.jms.Message
      Returns:
      the message type
      Throws:
      javax.jms.JMSException - if the JMS provider fails to get the message type due to some internal error.
      See Also:
      • Message.setJMSType(String)

    • setJMSType

      public void setJMSType(String type) throws javax.jms.JMSException
      Sets the message type.

      Some JMS providers use a message repository that contains the definitions of messages sent by applications. The JMSType header field may reference a message's definition in the provider's repository.

      The JMS API does not define a standard message definition repository, nor does it define a naming policy for the definitions it contains.

      Some messaging systems require that a message type definition for each application message be created and that each message specify its type. In order to work with such JMS providers, JMS clients should assign a value to JMSType, whether the application makes use of it or not. This ensures that the field is properly set for those providers that require it.

      To ensure portability, JMS clients should use symbolic values for JMSType that can be configured at installation time to the values defined in the current provider's message repository. If string literals are used, they may not be valid type names for some JMS providers.

      Specified by:
      setJMSType in interface javax.jms.Message
      Parameters:
      type - the message type
      Throws:
      javax.jms.JMSException - if the JMS provider fails to set the message type due to some internal error.
      See Also:
      • Message.getJMSType()

    • getJMSExpiration

      public long getJMSExpiration() throws javax.jms.JMSException
      Gets the message's expiration time.

      When a message is sent, the JMSExpiration header field is left unassigned. After completion of the send or publish method, it holds the expiration time of the message. This is the the difference, measured in milliseconds, between the expiration time and midnight, January 1, 1970 UTC.

      If the time-to-live is specified as zero, JMSExpiration is set to zero to indicate that the message does not expire.

      When a message's expiration time is reached, a provider should discard it. The JMS API does not define any form of notification of message expiration.

      Clients should not receive messages that have expired; however, the JMS API does not guarantee that this will not happen.

      Specified by:
      getJMSExpiration in interface javax.jms.Message
      Returns:
      the message's expiration time value
      Throws:
      javax.jms.JMSException - if the JMS provider fails to get the message expiration due to some internal error.
      See Also:
      • Message.setJMSExpiration(long)

    • setJMSExpiration

      public void setJMSExpiration(long expiration) throws javax.jms.JMSException
      Sets the message's expiration value.

      This method is for use by JMS providers only to set this field when a message is sent. This message cannot be used by clients to configure the expiration time of the message. This method is public to allow a JMS provider to set this field when sending a message whose implementation is not its own.

      Specified by:
      setJMSExpiration in interface javax.jms.Message
      Parameters:
      expiration - the message's expiration time
      Throws:
      javax.jms.JMSException - if the JMS provider fails to set the message expiration due to some internal error.
      See Also:
      • Message.getJMSExpiration()

    • getJMSDeliveryTime

      public long getJMSDeliveryTime() throws javax.jms.JMSException
      Gets the message's delivery time value.

      When a message is sent, the JMSDeliveryTime header field is left unassigned. After completion of the send or publish method, it holds the delivery time of the message. This is the the difference, measured in milliseconds, between the delivery time and midnight, January 1, 1970 UTC.

      A message's delivery time is the earliest time when a JMS provider may deliver the message to a consumer. The provider must not deliver messages before the delivery time has been reached.

      Specified by:
      getJMSDeliveryTime in interface javax.jms.Message
      Returns:
      the message's delivery time value
      Throws:
      javax.jms.JMSException - if the JMS provider fails to get the delivery time due to some internal error.
      Since:
      JMS 2.0
      See Also:
      • Message.setJMSDeliveryTime(long)

    • setJMSDeliveryTime

      public void setJMSDeliveryTime(long deliveryTime) throws javax.jms.JMSException
      Sets the message's delivery time value.

      This method is for use by JMS providers only to set this field when a message is sent. This message cannot be used by clients to configure the delivery time of the message. This method is public to allow a JMS provider to set this field when sending a message whose implementation is not its own.

      Specified by:
      setJMSDeliveryTime in interface javax.jms.Message
      Parameters:
      deliveryTime - the message's delivery time value
      Throws:
      javax.jms.JMSException - if the JMS provider fails to set the delivery time due to some internal error.
      Since:
      JMS 2.0
      See Also:
      • Message.getJMSDeliveryTime()

    • getJMSPriority

      public int getJMSPriority() throws javax.jms.JMSException
      Gets the message priority level.

      The JMS API defines ten levels of priority value, with 0 as the lowest priority and 9 as the highest. In addition, clients should consider priorities 0-4 as gradations of normal priority and priorities 5-9 as gradations of expedited priority.

      The JMS API does not require that a provider strictly implement priority ordering of messages; however, it should do its best to deliver expedited messages ahead of normal messages.

      Specified by:
      getJMSPriority in interface javax.jms.Message
      Returns:
      the default message priority
      Throws:
      javax.jms.JMSException - if the JMS provider fails to get the message priority due to some internal error.
      See Also:
      • Message.setJMSPriority(int)

    • setJMSPriority

      public void setJMSPriority(int priority) throws javax.jms.JMSException
      Sets the priority level for this message.

      This method is for use by JMS providers only to set this field when a message is sent. This message cannot be used by clients to configure the priority level of the message. This method is public to allow a JMS provider to set this field when sending a message whose implementation is not its own.

      Specified by:
      setJMSPriority in interface javax.jms.Message
      Parameters:
      priority - the priority of this message
      Throws:
      javax.jms.JMSException - if the JMS provider fails to set the message priority due to some internal error.
      See Also:
      • Message.getJMSPriority()

    • clearProperties

      public void clearProperties() throws javax.jms.JMSException
      Clears a message's properties.

      The message's header fields and body are not cleared.

      Specified by:
      clearProperties in interface javax.jms.Message
      Throws:
      javax.jms.JMSException - if the JMS provider fails to clear the message properties due to some internal error.

    • propertyExists

      public boolean propertyExists(String name) throws javax.jms.JMSException
      Indicates whether a property value exists.
      Specified by:
      propertyExists in interface javax.jms.Message
      Parameters:
      name - the name of the property to test
      Returns:
      true if the property exists
      Throws:
      javax.jms.JMSException - if the JMS provider fails to determine if the property exists due to some internal error.

    • getBooleanProperty

      public boolean getBooleanProperty(String name) throws javax.jms.JMSException
      Returns the value of the boolean property with the specified name.
      Specified by:
      getBooleanProperty in interface javax.jms.Message
      Parameters:
      name - the name of the boolean property
      Returns:
      the boolean property value for the specified name
      Throws:
      javax.jms.JMSException - if the JMS provider fails to get the property value due to some internal error.
      javax.jms.MessageFormatException - if this type conversion is invalid.

    • getByteProperty

      public byte getByteProperty(String name) throws javax.jms.JMSException
      Returns the value of the byte property with the specified name.
      Specified by:
      getByteProperty in interface javax.jms.Message
      Parameters:
      name - the name of the byte property
      Returns:
      the byte property value for the specified name
      Throws:
      javax.jms.JMSException - if the JMS provider fails to get the property value due to some internal error.
      javax.jms.MessageFormatException - if this type conversion is invalid.

    • getShortProperty

      public short getShortProperty(String name) throws javax.jms.JMSException
      Returns the value of the short property with the specified name.
      Specified by:
      getShortProperty in interface javax.jms.Message
      Parameters:
      name - the name of the short property
      Returns:
      the short property value for the specified name
      Throws:
      javax.jms.JMSException - if the JMS provider fails to get the property value due to some internal error.
      javax.jms.MessageFormatException - if this type conversion is invalid.

    • getIntProperty

      public int getIntProperty(String name) throws javax.jms.JMSException
      Returns the value of the int property with the specified name.
      Specified by:
      getIntProperty in interface javax.jms.Message
      Parameters:
      name - the name of the int property
      Returns:
      the int property value for the specified name
      Throws:
      javax.jms.JMSException - if the JMS provider fails to get the property value due to some internal error.
      javax.jms.MessageFormatException - if this type conversion is invalid.

    • getLongProperty

      public long getLongProperty(String name) throws javax.jms.JMSException
      Returns the value of the long property with the specified name.
      Specified by:
      getLongProperty in interface javax.jms.Message
      Parameters:
      name - the name of the long property
      Returns:
      the long property value for the specified name
      Throws:
      javax.jms.JMSException - if the JMS provider fails to get the property value due to some internal error.
      javax.jms.MessageFormatException - if this type conversion is invalid.

    • getFloatProperty

      public float getFloatProperty(String name) throws javax.jms.JMSException
      Returns the value of the float property with the specified name.
      Specified by:
      getFloatProperty in interface javax.jms.Message
      Parameters:
      name - the name of the float property
      Returns:
      the float property value for the specified name
      Throws:
      javax.jms.JMSException - if the JMS provider fails to get the property value due to some internal error.
      javax.jms.MessageFormatException - if this type conversion is invalid.

    • getDoubleProperty

      public double getDoubleProperty(String name) throws javax.jms.JMSException
      Returns the value of the double property with the specified name.
      Specified by:
      getDoubleProperty in interface javax.jms.Message
      Parameters:
      name - the name of the double property
      Returns:
      the double property value for the specified name
      Throws:
      javax.jms.JMSException - if the JMS provider fails to get the property value due to some internal error.
      javax.jms.MessageFormatException - if this type conversion is invalid.

    • getStringProperty

      public String getStringProperty(String name) throws javax.jms.JMSException
      Returns the value of the String property with the specified name.
      Specified by:
      getStringProperty in interface javax.jms.Message
      Parameters:
      name - the name of the String property
      Returns:
      the String property value for the specified name; if there is no property by this name, a null value is returned
      Throws:
      javax.jms.JMSException - if the JMS provider fails to get the property value due to some internal error.
      javax.jms.MessageFormatException - if this type conversion is invalid.

    • getObjectProperty

      public Object getObjectProperty(String name) throws javax.jms.JMSException
      Returns the value of the Java object property with the specified name.

      This method can be used to return, in objectified format, an object that has been stored as a property in the message with the equivalent setObjectProperty method call, or its equivalent primitive settypeProperty method.

      Specified by:
      getObjectProperty in interface javax.jms.Message
      Parameters:
      name - the name of the Java object property
      Returns:
      the Java object property value with the specified name, in objectified format (for example, if the property was set as an int, an Integer is returned); if there is no property by this name, a null value is returned
      Throws:
      javax.jms.JMSException - if the JMS provider fails to get the property value due to some internal error.

    • getPropertyNames

      public Enumeration getPropertyNames() throws javax.jms.JMSException
      Returns an Enumeration of all the property names.

      Note that JMS standard header fields are not considered properties and are not returned in this enumeration.

      Specified by:
      getPropertyNames in interface javax.jms.Message
      Returns:
      an enumeration of all the names of property values
      Throws:
      javax.jms.JMSException - if the JMS provider fails to get the property names due to some internal error.

    • setBooleanProperty

      public void setBooleanProperty(String name, boolean value) throws javax.jms.JMSException
      Sets a boolean property value with the specified name into the message.
      Specified by:
      setBooleanProperty in interface javax.jms.Message
      Parameters:
      name - the name of the boolean property
      value - the boolean property value to set
      Throws:
      javax.jms.JMSException - if the JMS provider fails to set the property due to some internal error.
      IllegalArgumentException - if the name is null or if the name is an empty string.
      javax.jms.MessageNotWriteableException - if properties are read-only

    • setByteProperty

      public void setByteProperty(String name, byte value) throws javax.jms.JMSException
      Sets a byte property value with the specified name into the message.
      Specified by:
      setByteProperty in interface javax.jms.Message
      Parameters:
      name - the name of the byte property
      value - the byte property value to set
      Throws:
      javax.jms.JMSException - if the JMS provider fails to set the property due to some internal error.
      IllegalArgumentException - if the name is null or if the name is an empty string.
      javax.jms.MessageNotWriteableException - if properties are read-only

    • setShortProperty

      public void setShortProperty(String name, short value) throws javax.jms.JMSException
      Sets a short property value with the specified name into the message.
      Specified by:
      setShortProperty in interface javax.jms.Message
      Parameters:
      name - the name of the short property
      value - the short property value to set
      Throws:
      javax.jms.JMSException - if the JMS provider fails to set the property due to some internal error.
      IllegalArgumentException - if the name is null or if the name is an empty string.
      javax.jms.MessageNotWriteableException - if properties are read-only

    • setIntProperty

      public void setIntProperty(String name, int value) throws javax.jms.JMSException
      Sets an int property value with the specified name into the message.
      Specified by:
      setIntProperty in interface javax.jms.Message
      Parameters:
      name - the name of the int property
      value - the int property value to set
      Throws:
      javax.jms.JMSException - if the JMS provider fails to set the property due to some internal error.
      IllegalArgumentException - if the name is null or if the name is an empty string.
      javax.jms.MessageNotWriteableException - if properties are read-only

    • setLongProperty

      public void setLongProperty(String name, long value) throws javax.jms.JMSException
      Sets a long property value with the specified name into the message.
      Specified by:
      setLongProperty in interface javax.jms.Message
      Parameters:
      name - the name of the long property
      value - the long property value to set
      Throws:
      javax.jms.JMSException - if the JMS provider fails to set the property due to some internal error.
      IllegalArgumentException - if the name is null or if the name is an empty string.
      javax.jms.MessageNotWriteableException - if properties are read-only

    • setFloatProperty

      public void setFloatProperty(String name, float value) throws javax.jms.JMSException
      Sets a float property value with the specified name into the message.
      Specified by:
      setFloatProperty in interface javax.jms.Message
      Parameters:
      name - the name of the float property
      value - the float property value to set
      Throws:
      javax.jms.JMSException - if the JMS provider fails to set the property due to some internal error.
      IllegalArgumentException - if the name is null or if the name is an empty string.
      javax.jms.MessageNotWriteableException - if properties are read-only

    • setDoubleProperty

      public void setDoubleProperty(String name, double value) throws javax.jms.JMSException
      Sets a double property value with the specified name into the message.
      Specified by:
      setDoubleProperty in interface javax.jms.Message
      Parameters:
      name - the name of the double property
      value - the double property value to set
      Throws:
      javax.jms.JMSException - if the JMS provider fails to set the property due to some internal error.
      IllegalArgumentException - if the name is null or if the name is an empty string.
      javax.jms.MessageNotWriteableException - if properties are read-only

    • setStringProperty

      public void setStringProperty(String name, String value) throws javax.jms.JMSException
      Sets a String property value with the specified name into the message.
      Specified by:
      setStringProperty in interface javax.jms.Message
      Parameters:
      name - the name of the String property
      value - the String property value to set
      Throws:
      javax.jms.JMSException - if the JMS provider fails to set the property due to some internal error.
      IllegalArgumentException - if the name is null or if the name is an empty string.
      javax.jms.MessageNotWriteableException - if properties are read-only

    • setObjectProperty

      public void setObjectProperty(String name, Object value) throws javax.jms.JMSException
      Sets a Java object property value with the specified name into the message.

      Note that this method works only for the objectified primitive object types ( Integer, Double, Long ...) and String objects.

      Specified by:
      setObjectProperty in interface javax.jms.Message
      Parameters:
      name - the name of the Java object property
      value - the Java object property value to set
      Throws:
      javax.jms.JMSException - if the JMS provider fails to set the property due to some internal error.
      IllegalArgumentException - if the name is null or if the name is an empty string.
      javax.jms.MessageFormatException - if the object is invalid
      javax.jms.MessageNotWriteableException - if properties are read-only

    • acknowledge

      public void acknowledge() throws javax.jms.JMSException
      Acknowledges all consumed messages of the session of this consumed message.

      All consumed JMS messages support the acknowledge method for use when a client has specified that its JMS session's consumed messages are to be explicitly acknowledged. By invoking acknowledge on a consumed message, a client acknowledges all messages consumed by the session that the message was delivered to.

      Calls to acknowledge are ignored for both transacted sessions and sessions specified to use implicit acknowledgement modes.

      A client may individually acknowledge each message as it is consumed, or it may choose to acknowledge messages as an application-defined group (which is done by calling acknowledge on the last received message of the group, thereby acknowledging all messages consumed by the session.)

      Messages that have been received but not acknowledged may be redelivered.

      Specified by:
      acknowledge in interface javax.jms.Message
      Throws:
      javax.jms.JMSException - if the JMS provider fails to acknowledge the messages due to some internal error.
      javax.jms.IllegalStateException - if this method is called on a closed session.
      See Also:
      • Session.CLIENT_ACKNOWLEDGE

    • negativeAck

      public void negativeAck()

    • checkWritable

      protected final void checkWritable() throws javax.jms.MessageNotWriteableException
      Throws:
      javax.jms.MessageNotWriteableException

    • checkReadable

      protected final void checkReadable() throws javax.jms.MessageNotReadableException
      Throws:
      javax.jms.MessageNotReadableException

    • checkWritableProperty

      protected final void checkWritableProperty(String name) throws javax.jms.JMSException
      Throws:
      javax.jms.JMSException

    • messageType

      protected abstract String messageType()

    • prepareForSend

      protected abstract void prepareForSend(org.apache.pulsar.client.api.TypedMessageBuilder<byte[]> producer) throws javax.jms.JMSException
      Throws:
      javax.jms.JMSException

    • applyMessage

      protected PulsarMessage applyMessage(org.apache.pulsar.client.api.Message<?> msg, PulsarMessageConsumer consumer, org.apache.pulsar.client.api.Consumer<?> pulsarConsumer)

    • validateWritableObject

      protected static void validateWritableObject(Object value) throws javax.jms.MessageFormatException
      Throws:
      javax.jms.MessageFormatException

    • isReceivedFromConsumer

      public boolean isReceivedFromConsumer(PulsarMessageConsumer consumer)

    • handleExceptionAccordingToMessageSpecs

      protected static javax.jms.JMSException handleExceptionAccordingToMessageSpecs(Throwable t) throws javax.jms.JMSException
      Throws:
      javax.jms.JMSException

    • setWritable

      public void setWritable(boolean b)

    • acknowledgeInternalInTransaction

      public CompletableFuture<?> acknowledgeInternalInTransaction(org.apache.pulsar.client.api.transaction.Transaction transaction)

    • getReceivedPulsarMessage

      public org.apache.pulsar.client.api.Message<?> getReceivedPulsarMessage()

    • readJMSPriority

      public static int readJMSPriority(org.apache.pulsar.client.api.Message<?> msg)