Uses of Class
com.foursoft.harness.vec.v113.VecExtendableElement

Packages that use VecExtendableElement

Package	Description
com.foursoft.harness.vec.v113

Uses of VecExtendableElement in com.foursoft.harness.vec.v113

Subclasses of VecExtendableElement in com.foursoft.harness.vec.v113

Modifier and Type	Class	Description
class	VecAbstractSlot	AnAbstractSlotis a geometrical place in a connector housing, which can contain / group cavities.
class	VecAbstractSlotReference	AnAbstractSlotReferencerepresents the usage of an AbstractSlot in the context of PartUsage or PartOccurrence.
class	VecAntennaSpecification	Specification of the electrological aspects of an antenna.
class	VecApproval	Defines the approval of an ItemVersion.
class	VecBatterySpecification	Specification of the electrological aspects of a battery.
class	VecBoltMountedFixingSpecification	Specification for fixings that are mounted onto a bolt.
class	VecBSplineCurve	A B-spline curve is a piecewise parametric polynomial or rational curve described in terms of control points and basis functions.
class	VecBuildingBlockPositioning2D	Defines the position of a BuildingBlock2D on a HarnessDrawing.
class	VecBuildingBlockPositioning3D	Defines the position of a BuildingBlock3D in the HarnessGeometry.
class	VecBuildingBlockSpecification2D	Specification for the description of a two dimensional building block.
class	VecBuildingBlockSpecification3D	Specification for the description of a three dimensional building block.
class	VecCableDuctOutlet	Specifies one outlet of the cableduct.
class	VecCableDuctRole	ACableDuctRoledefines the instance specific properties and relationships of a cable duct.
class	VecCableDuctSpecification	Specification for cable ducts.
class	VecCableLeadThrough	A CableLeadThrough specifies a hole in the grommet through which wires can pass through the grommet.
class	VecCableTieRole	CableTieRole
class	VecCableTieSpecification	Specification for the definition of cable ties.
class	VecCartesianDimension	Java class for CartesianDimension complex type.
class	VecCartesianPoint2D	A CartesianPoint2D is a point that is defined by its coordinates in a rectangular two-dimensional Cartesian coordinate system.
class	VecCartesianPoint3D	A CartesianPoint3D is a point that is defined by its coordinates in a rectangular three-dimensional Cartesian coordinate system.
class	VecCavity	A cavity is a defined space in a connector housing for location of an electrical terminal or cavity plug or seal.
class	VecCavityAccessoryRole	ACavityAccessoryRoledefines the instance specific properties and relationships of a cavity accessory.
class	VecCavityAccessorySpecification	ACavityAccessoryis an non-electrical part used in an cavity with no sealing properties (e.g.
class	VecCavityCoupling	ACavityCouplingdefines the mapping between two cavities of theConnectorHousingRolesassociated with theCouplingPoint.
class	VecCavityMounting	A CavityMounting defines the cavities (CavityReference) where the contacted elements (Terminal) will be mounted.
class	VecCavityMountingDetail	With a CavityMountingDetail it is possible to describe a detailed cavity mounting.
class	VecCavityPartSpecification	CavityPartSpecification Cavities
class	VecCavityPlugRole	A CavityPlugRole defines the instance specific properties and relationships of a cavity plug.
class	VecCavityPlugSpecification	Specification for the definition of cavity seals.
class	VecCavityReference	A CavityReference represents the usage of a Cavity in the context of PartUsage or PartOccurrence.
class	VecCavitySealRole	A CavitySealRole defines the instance specific properties and relationships of a cavity seal.
class	VecCavitySealSpecification	Specification for the definition of cavity seals.
class	VecCavitySpecification	Specification for the definition of cavities.
class	VecChangeDescription	A ChangeDescription describes the implemented issues that are reason for the aggregating ItemVersion to be either an initial or successor version.
class	VecCoding	Specifies the coding of a slot or a connector housing.
class	VecCompatibilitySpecification	A CompatibilitySpecification specifies a set of CompatibilityStatements.
class	VecCompatibilityStatement	A CompatibilityStatement is used to express compatibility between parts.
class	VecComponentConnector	AComponentConnectoris a grouping ofComponentPortsand represents a logical abstraction of a connector of anEEComponent.
class	VecComponentNode	A ComponentNode is a node where an electrological component is located.
class	VecComponentPort	Defines a port of ComponentNode.
class	VecCompositionSpecification	The CompositionSpecificiation is used to define a set of occurrences required to describe unambiguously the design of a composite part.
class	VecConductorSpecification	Specification for the definition of conducting properties of a WireElement.
class	VecConfigurableElement	Abstract base class for all elements which can be configured with a VariantConfiguration.
class	VecConformanceClass	The ConformanceClass element represents a link to a ConformanceClass to which the vec-file is compliant.
class	VecConnection	A Connection is an electrological connection between two or more ComponentPorts.
class	VecConnectionEnd	A connection end is the end of a Connection at a ComponentPort.
class	VecConnectionGroup	A ConnectionGroup references two or more Connections expressing that the physical realization of the referenced Connection shall be somehow grouped e.g.
class	VecConnectionSpecification	A ConnectionSpecification is used to define electrological connectivity.
class	VecConnectorHousingCapRole	Java class for ConnectorHousingCapRole complex type.
class	VecConnectorHousingCapSpecification	Specification for the definition of cap's (backshells) of connectors.
class	VecConnectorHousingRole	A ConnectorHousingRole defines the instance specific properties and relationships of a connector housing.
class	VecConnectorHousingSpecification	Specification for the definition of connector housings.
class	VecContactingSpecification	Java class for ContactingSpecification complex type.
class	VecContactPoint	A contact point defines the relationship between Terminals, Seals, Plugs, Cavities and Wires.
class	VecContactSystem	Java class for ContactSystem complex type.
class	VecContactSystemSpecification	Specification for the definition of ContactSystems.
class	VecContent	The VecContent is the XML-Root node for any VEC-Document.
class	VecContract	A Contract-instance describes the relationship between an ItemVersion-instance and a Company-instance additionally defining the role the company takes in reference to the ItemVersion.
class	VecCopyrightInformation	A CopyrightInformation-instance specifies copyright information for one or more Items.
class	VecCoreSpecification	Defines the properties of a circular conductor (core) which are specific for them.
class	VecCorrugatedPipeSpecification	Specification for the definition of corrugated pipes.
class	VecCouplingPoint	ACouplingPointdefines a single coupling.
class	VecCouplingSpecification	Specification for the description of a Coupling.
class	VecCreation	A Creation-instance provides additional information to the owning ItemVersion stating personal information on the creator and the creation date.
class	VecDefaultDimensionSpecification	DefaultDimensionSpecification
class	VecDimension	A Dimension defines a measurement for the distance between two Locations.
class	VecDimensionAnchor	ADimensionAnchorrepresents an abstract anchor onto which aDimensioncan be specified.
class	VecDocumentBasedInstruction	A DocumentBasedInstruction is an Instruction to a SheetOrChapter in a DocumentVersion or to a complete DocumentVersion.
class	VecDocumentVersion	The DocumentVersion is one of the two anchors for PDM information in the VEC.
class	VecEdgeMountedFixingSpecification	Specification for fixings that are mounted onto an edge.
class	VecEEComponentRole	An EEComponentRole defines the instance specific properties and relationships of an EE-component.
class	VecEEComponentSpecification	Base-class for the specification of electrological components, which are connected to the harness.
class	VecExtensionSlot	AnExtensionSlotdefines a slot within an EE-Component where other EE-Components can plugged into (modular extension).
class	VecExtensionSlotReference	A ExtensionSlotReference represents the usage of a ExtensionSlot in the context of a PartUsage or PartOccurrence.
class	VecExternalMapping	AnExternalMappingis used to relate anExtendableElementin the VEC with an element located in an external data source.
class	VecExternalMappingSpecification	AnExternalMappingSpecificationis used to define a mapping between an external data source (represented by the referencedmappedDocument) and the content of a VEC file.
class	VecFileBasedInstruction	A FileBasedInstruction is an Instruction that references a file packaged together with a VEC-document.
class	VecFillerSpecification	Specification for the definition of filler elements in the wire.
class	VecFittingOutlet	Specifies one outlet of the fitting.
class	VecFittingSpecification	Specification for the definition of fittings.
class	VecFixingRole	A FixingRole defines the instance specific properties and relationships of a fixing.
class	VecFixingSpecification	Specification for the definition of fixings.
class	VecFlatCoreSpecification	Defines the properties of a flat (rectangular) conductor which are specific for them.
class	VecFuseSpecification	Specification of the electrological aspects of a fuse.
class	VecGeneralTechnicalPartSpecification	Specification for the definition of common properties for technical parts.
class	VecGeometryNode	A GeometryNode is the geometric representation of a TopologyNode.
class	VecGeometryNode2D	A GeometryNode2D is the geometric representation of a TopologyNode in 2D-space.
class	VecGeometryNode3D	A GeometryNode3D is the geometric representation of a TopologyNode in 3D-space.
class	VecGeometrySegment	A GeometrySegment is the geometric representation of a TopologySegment.
class	VecGeometrySegment2D	A GeometrySegment2D is the geometric representation of a TopologySegment in 2D-space.
class	VecGeometrySegment3D	A GeometrySegment3D is the geometric representation of a TopologySegment in 3D-space.
class	VecGrommetRole	A GrommetRole defines the instance specific properties and relationships of a grommet.
class	VecGrommetSpecification	Specification for the definition of grommets.
class	VecHarnessDrawingSpecification2D	The HarnessDrawingSpecification2D specifies a two dimensional drawing of a harness.
class	VecHarnessGeometrySpecification3D	The HarnessGeometrieSpecification3D specifies a three dimensional model of a harness.
class	VecHoleMountedFixingSpecification	Specification for fixings that are mounted with a hole.
class	VecHousingComponent	A HousingComponent describes the interface of an EEComponent with which it can be connected to another EEComponent or a harness.
class	VecHousingComponentReference	A HousingComponentReference represents the usage of a HousingComponent in the context of a PartUsage or PartOccurrence.
class	VecInstruction	Abstract super class to specify different types of instructions.
class	VecInsulationSpecification	Specification for the definition of insulation properties of a WireElement.
class	VecInternalComponentConnection	AnInternalComponentConnectiondefines a conductive connection between a number ofPinComponentswithin anEEComponent.
class	VecInternalTerminalConnection	An InternalTerminalConnection represents an electrical connection within a terminal.
class	VecItemEquivalence	Defines two or more ItemVersions to be equivalent out of the view of a certain company.
class	VecItemHistoryEntry	An ItemHistroyEntry defines the direct relationship between ItemVersions in the terms of predecessor and successor.
class	VecItemVersion	Abstract super-class for physical objects (e.g.
class	VecLocation	A Location specifies a distinct position on a topology.
class	VecMapping	The Mapping defines the concrete mapping two parts aliased as A & B.
class	VecMappingSpecification	Specification for the description of a PinMapping.
class	VecMatingDetail	If the mating of the two terminals is not unambiguously, a MatingDetail can specify the TerminalReceptions that are mated.
class	VecMatingPoint	A MatingPoint defines the Mating of two terminals.
class	VecMeasurementPoint	Defines a reference point on a component that can be used to apply a Dimension.
class	VecMeasurementPointReference	AMeasurementPointReferenceis the instance of aMeasurementPointin the context of anOccurrenceOrUsage.
class	VecModularSlot	A ModularSlot is a place in a connector housing where different other connector housings can be placed during the assembly (e.g.
class	VecModularSlotReference	AModularSlotReferencerepresents the usage of aModularSlotin the context of PartUsage or PartOccurrence.
class	VecModuleFamily	A ModuleFamily is a mechanism to group mutually exclusive modules.
class	VecModuleFamilySpecification	Specification for the description of module families (see ModuleFamily).
class	VecModuleList	A ModuleList is a mechanism to control additional / completition PartOccurrences.
class	VecModuleListSpecification	Specification for the description of module lists (see ModuleList).
class	VecMultiCavityPlugSpecification	Specification for the definition of cavity plugs that apply to more than one cavity.
class	VecMultiCavitySealSpecification	Specification for cavity seals that apply to more than one cavity.
class	VecMultiFuseSpecification	Java class for MultiFuseSpecification complex type.
class	VecNet	A Net is an undirected link between a number ofNetworkPorts. It defines that theNetworkPortsare related to each other with theNet.
class	VecNetGroup	A NetGroup allows the grouping of the Nets.
class	VecNetSpecification	Specification for the description of electrological nets.
class	VecNetworkNode	A NetworkNode is a representative for an actor in the electric system, e.g.
class	VecNetworkPort	NetworkPort is the source or the receiver of a of a Net.
class	VecNodeLocation	Specifies a TopologyNode as a Location.
class	VecOccurrenceOrUsage	An OccurrenceOrUsage is an abstract appearance of a part in the harness.
class	VecOccurrenceOrUsageViewItem2D	An OccurrenceOrUsageViewItem2D specifies the representation of a OcurrenceOrUsage in a 2DDrawing.
class	VecOccurrenceOrUsageViewItem3D	An OccurrenceOrUsageViewItem3D specifies the representation of an OcurrenceOrUsage in a 3D-model.
class	VecOnPointPlacement	An OnPointPlacement is a placement of an OccurrenceOrUsage that places it onto discrete points, in most cases one point.
class	VecOnWayPlacement	An OnWayPlacement places an OccurrenceOrUsage onto an area of the Topology (e.g.
class	VecPartOccurrence	A PartOccurrence is an instance of a component with a specified part number (PartVersion).
class	VecPartOrUsageRelatedSpecification	Base class for all specifications which are describing aPartVersionor aPartUsage.
class	VecPartStructureSpecification	Specification for the description of a part structure.
class	VecPartSubstitutionSpecification	APartSubstitutionSpecificationdefines a set ofPartVersionsthat can be used alternatively, due to an incomplete specification for the 150% product description.
class	VecPartUsage	PartUsages shall be used for the specification of the elements on an electrical system wiring plan and for the specification of the elements on a pure geometry description.
class	VecPartUsageSpecification	Specification for the definition of PartUsages.
class	VecPartVersion	The PartVersion is one of the two anchors for PDM information in the VEC.
class	VecPartWithSubComponentsRole	A PartWithSubComponentsRole defines the instance specific properties and relationships of a part with subcomponents.
class	VecPath	Describes a path in the topology.
class	VecPathSegment	A PathSegment is a part of the 2D presentation of a GeometrySegment2D.
class	VecPermission	Describes an act of acceptance together with information about the responsible person, department and company who directly provoked the approval level and status as described in the referenced Approval-instance.
class	VecPinComponent	A PinComponent describes a pin of an EEComponent.
class	VecPinComponentBehavior	APinComponentBehaviorspecifies the electrical behavior of aPinComponent.Since the behavior of a pin is configuration dependent (e.g.
class	VecPinComponentReference	A PinComponentReference represents the usage of a PinComponent in the context of a PartUsage or PartOccurrence.
class	VecPlaceableElementRole	A PlaceableElementRole defines the instance specific properties and relationships of a PlaceableElement.
class	VecPlaceableElementSpecification	Specification for the general aspects of a component that are enabling the component to be placed in a topology.
class	VecPlacement	A placement defines the placement of a PlaceableElementRole onto a Topology.
class	VecPlacementPoint	Defines a point on the component which can be placed explicitly in the topology (e.g.
class	VecPlacementPointReference	APlacementPointReferenceis the instance of aPlacementPointin the context of anOccurrenceOrUsage.
class	VecPlacementSpecification	Specification for the description of placements.Placementsare used to connectOccurrenceOrUsageswith a topology.
class	VecPluggableTerminalRole	A PluggableTerminalRole defines the instance specific properties and relationships of a pluggable terminal.
class	VecPluggableTerminalSpecification	Specification for the definition of pluggable terminals.
class	VecPotentialDistributorSpecification	Java class for PotentialDistributorSpecification complex type.
class	VecProject	Specifies a certain vehicle project.
class	VecRelaySpecification	Specification of the electrological aspects of a relay.
class	VecRingTerminalRole	A RingTerminalRole defines the instance specific properties and relationships of a ring terminal.
class	VecRingTerminalSpecification	Specification for the definition of ring terminals.
class	VecRole	A Role is the corresponding mechanism for OccurrenceOrUsages to the PartOrUsageRelatedSpecifcations for PartVersions or PartUsages.
class	VecRoutableElement	A RoutableElement is an element that can be routed, which mean it is possible to assign it to a Path in the Topology.
class	VecRouting	A Routing is the assignment of a RoutableElement (Connection or WireElementReference) to a path in the topology.
class	VecRoutingSpecification	Specification for the description of Routings.
class	VecSegmentConnectionPoint	Specifies a point where the connector can be attached to the topology (sometimes called bundle position point or insertion point).
class	VecSegmentCrossSectionArea	Specifies the cross section area of a segment.
class	VecSegmentLength	Specifies the length of a segment.
class	VecSegmentLocation	Specifies a point on a TopologySegment as a Location.
class	VecSheetOrChapter	Documents can be structured into sheets or chapters.
class	VecShieldSpecification	Specifies the properties of a shield.
class	VecShrinkableTubeSpecification	Specification of tubes that are shrinkable.
class	VecSignal	Specifies a signal.
class	VecSignalSpecification	Specification for the definition of a list of valid signals.
class	VecSlot	A slot is a group of cavities in a connector housing with own properties.
class	VecSlotCoupling	ASlotCouplingdefines the mapping between two slots of theConnectorHousingRolesassociated with theCouplingPoint.
class	VecSlotReference	ASlotReferencerepresents the usage of aSlotin the context of PartUsage or PartOccurrence.
class	VecSlotSpecification	Specification for the definition of slots.
class	VecSpecification	Abstract super-class for all specifications.
class	VecSpecificRole	A SpecificRole is the possibility to define instance specific properties with custom properties (see ExtendableElement).
class	VecSpliceTerminalRole	A SpliceTerminalRole defines the instance specific properties and relationships of a splice terminal.
class	VecSpliceTerminalSpecification	Specification for the definition of splice terminals.
class	VecStripeSpecification	Specifies a stripe which has fixed length and width.
class	VecSwitchingState	ASwitchingStatedefines a certain static state of anEEComponent.
class	VecTapeSpecification	Specification for the description of tapes.
class	VecTerminalReception	A TerminalReception is the area of a terminal where the contacting with another terminal (e.g.
class	VecTerminalReceptionSpecification	Specification for the definition of terminal receptions.
class	VecTerminalRole	A TerminalRole defines the instance specific properties and relationships of a terminal.
class	VecTerminalSpecification	Specification for the definition of terminals.
class	VecTerminalType	Defines the type (system) of a terminal.
class	VecTextBasedInstruction	A TextBasedInstruction is used to specify human readable instructions in text.
class	VecTolerance	Enables the specification of value ranges which can be tolerated.
class	VecTopologyGroupSpecification	A TopologyGroupSpecification defines a new Topology based on the grouped Topologies.
class	VecTopologyNode	A TopologyNode is a point in the Topology where TopologySegments are starting and ending.
class	VecTopologySegment	A TopologySegment is a distance in the Topology where no intermediate electrical contacts appear.
class	VecTopologySpecification	Specification for the definition of a topology.
class	VecTransformation2D	A Transformation is a geometric transformation and specifies a transformation matrix.
class	VecTransformation3D	A Transformation is a geometric transformation and specifies a transformation matrix.
class	VecTubeSpecification	Specifies tubes.
class	VecUsageConstraint	Specifies a constraint of the possible usages for PartVersion or PartUsages.
class	VecUsageConstraintSpecification	Specification for the definition of usage constraints.
class	VecUsageNode	AUsageNoderepresents a position in an abstract vehicle.
class	VecUsageNodeSpecification	AUsageNodeSpecificationis a container for the specification ofUsageNodes.
class	VecVariantCode	VariantCodes are defining the literals on which VariantConfiguration are stated.
class	VecVariantCodeSpecification	Specification for the definition of variant codes.
class	VecVariantConfiguration	A variant configuration defines a condition with which it is possible to express the inclusion or exclusion of ConfigurableElements in different variants of a product.
class	VecVariantConfigurationSpecification	Specification for the definition of variant configurations.
class	VecVariantGroup	With a VariantGroup it is possible to group VariantCodes.
class	VecVariantGroupSpecification	Specification for the definition of variant groups.
class	VecWireElement	AWireElementspecifies aWireElementSpecificationin the context of aWireSpecification.
class	VecWireElementReference	A WireElementReference represents the usage of a WireElement in the context of a PartUsage or PartOccurrence.
class	VecWireElementSpecification	A WireElementSpecification is the basic element to describe a wire in the VEC.
class	VecWireEnd	A WireEnd is the end of a wire.
class	VecWireEndAccessoryRole	AWireEndAccessoryRoledefines the instance specific properties and relationships of aWireEndAccessory.
class	VecWireEndAccessorySpecification	WireEndAccessorySpecificationsare describing parts that are used for a treatment of a wire end before the actual terminal is attached to theWireEnd(e.g.
class	VecWireGrouping	A WireGrouping is the assignment of WireElementReferences to a WireGroupSpecification.
class	VecWireGroupingSpecification	Specification for the description of WireGroupings.
class	VecWireGroupSpecification	Specification for the definition of WireGroups.
class	VecWireLength	Defines the length of a WireElementReference.
class	VecWireMounting	A wire mouting defines the mouting of a wire end to terminal.
class	VecWireMountingDetail	With a WireMountingDetail it is possible to describe a detailed wire mounting.
class	VecWireProtectionRole	A WireProtectionRole defines the instance specific properties and relationships of a wire protection.
class	VecWireProtectionSpecification	Specification for the description of wire protections.
class	VecWireReception	A WireReception is the area of a terminal where the contacting with a wire element (e.g.
class	VecWireReceptionSpecification	Specification for the definition of wire receptions.
class	VecWireRole	A WireRole defines the instance specific properties and relationships of a wire.
class	VecWireSpecification	Specification for the definition of a wire.
class	VecZone	A Zone divides a topology in different sections / design spaces.

Fields in com.foursoft.harness.vec.v113 declared as VecExtendableElement

Modifier and Type	Field	Description
protected VecExtendableElement	VecExternalMapping.mappedElement

Methods in com.foursoft.harness.vec.v113 that return VecExtendableElement

Modifier and Type	Method	Description
VecExtendableElement	VecExternalMapping.getMappedElement()	Gets the value of the mappedElement property.
VecExtendableElement	VecCustomProperty.getParentExtendableElement()	Gets a reference to the parent of this object in the XML DOM Tree.

Methods in com.foursoft.harness.vec.v113 with parameters of type VecExtendableElement

Modifier and Type	Method	Description
void	VecExternalMapping.setMappedElement(VecExtendableElement value)	Sets the value of the mappedElement property.