public class AmazonDynamoDBAsyncClient extends AmazonDynamoDBClient implements AmazonDynamoDBAsync
This is the Amazon DynamoDB API Reference. This guide provides descriptions and samples of the low-level DynamoDB API. For information about DynamoDB application development, go to the Amazon DynamoDB Developer Guide .
Instead of making the requests to the low-level DynamoDB API directly from your application, we recommend that you use the AWS Software Development Kits (SDKs). The easy-to-use libraries in the AWS SDKs make it unnecessary to call the low-level DynamoDB API directly from your application. The libraries take care of request authentication, serialization, and connection management. For more information, go to Using the AWS SDKs with DynamoDB in the Amazon DynamoDB Developer Guide .
If you decide to code against the low-level DynamoDB API directly, you will need to write the necessary code to authenticate your requests. For more information on signing your requests, go to Using the DynamoDB API in the Amazon DynamoDB Developer Guide .
The following are short descriptions of each low-level API action, organized by function.
Managing Tables
CreateTable - Creates a table with user-specified provisioned throughput settings. You must designate one attribute as the hash primary key for the table; you can optionally designate a second attribute as the range primary key. DynamoDB creates indexes on these key attributes for fast data access. Optionally, you can create one or more secondary indexes, which provide fast data access using non-key attributes.
DescribeTable - Returns metadata for a table, such as table size, status, and index information.
UpdateTable - Modifies the provisioned throughput settings for a table. Optionally, you can modify the provisioned throughput settings for global secondary indexes on the table.
ListTables - Returns a list of all tables associated with the current AWS account and endpoint.
DeleteTable - Deletes a table and all of its indexes.
For conceptual information about managing tables, go to Working with Tables in the Amazon DynamoDB Developer Guide .
Reading Data
GetItem - Returns a set of attributes for the item that has a given primary key. By default, GetItem performs an eventually consistent read; however, applications can specify a strongly consistent read instead.
BatchGetItem - Performs multiple GetItem requests for data items using their primary keys, from one table or multiple tables. The response from BatchGetItem has a size limit of 1 MB and returns a maximum of 100 items. Both eventually consistent and strongly consistent reads can be used.
Query - Returns one or more items from a table or a secondary index. You must provide a specific hash key value. You can narrow the scope of the query using comparison operators against a range key value, or on the index key. Query supports either eventual or strong consistency. A single response has a size limit of 1 MB.
Scan - Reads every item in a table; the result set is eventually consistent. You can limit the number of items returned by filtering the data attributes, using conditional expressions. Scan can be used to enable ad-hoc querying of a table against non-key attributes; however, since this is a full table scan without using an index, Scan should not be used for any application query use case that requires predictable performance.
For conceptual information about reading data, go to Working with Items and Query and Scan Operations in the Amazon DynamoDB Developer Guide .
Modifying Data
PutItem - Creates a new item, or replaces an existing item with a new item (including all the attributes). By default, if an item in the table already exists with the same primary key, the new item completely replaces the existing item. You can use conditional operators to replace an item only if its attribute values match certain conditions, or to insert a new item only if that item doesn't already exist.
UpdateItem - Modifies the attributes of an existing item. You can also use conditional operators to perform an update only if the item's attribute values match certain conditions.
DeleteItem - Deletes an item in a table by primary key. You can use conditional operators to perform a delete an item only if the item's attribute values match certain conditions.
BatchWriteItem - Performs multiple PutItem and DeleteItem requests across multiple tables in a single request. A failure of any request(s) in the batch will not cause the entire BatchWriteItem operation to fail. Supports batches of up to 25 items to put or delete, with a maximum total request size of 1 MB.
For conceptual information about modifying data, go to Working with Items and Query and Scan Operations in the Amazon DynamoDB Developer Guide .
jsonErrorUnmarshallersclient, clientConfiguration, endpoint, LOGGING_AWS_REQUEST_METRIC, requestHandler2s, timeOffset| Constructor and Description |
|---|
AmazonDynamoDBAsyncClient()
Constructs a new asynchronous client to invoke service methods on
AmazonDynamoDBv2.
|
AmazonDynamoDBAsyncClient(AWSCredentials awsCredentials)
Constructs a new asynchronous client to invoke service methods on
AmazonDynamoDBv2 using the specified AWS account credentials.
|
AmazonDynamoDBAsyncClient(AWSCredentials awsCredentials,
ClientConfiguration clientConfiguration,
java.util.concurrent.ExecutorService executorService)
Constructs a new asynchronous client to invoke service methods on
AmazonDynamoDBv2 using the specified AWS account credentials,
executor service, and client configuration options.
|
AmazonDynamoDBAsyncClient(AWSCredentials awsCredentials,
java.util.concurrent.ExecutorService executorService)
Constructs a new asynchronous client to invoke service methods on
AmazonDynamoDBv2 using the specified AWS account credentials
and executor service.
|
AmazonDynamoDBAsyncClient(AWSCredentialsProvider awsCredentialsProvider)
Constructs a new asynchronous client to invoke service methods on
AmazonDynamoDBv2 using the specified AWS account credentials provider.
|
AmazonDynamoDBAsyncClient(AWSCredentialsProvider awsCredentialsProvider,
ClientConfiguration clientConfiguration)
Constructs a new asynchronous client to invoke service methods on
AmazonDynamoDBv2 using the specified AWS account credentials
provider and client configuration options.
|
AmazonDynamoDBAsyncClient(AWSCredentialsProvider awsCredentialsProvider,
ClientConfiguration clientConfiguration,
java.util.concurrent.ExecutorService executorService)
Constructs a new asynchronous client to invoke service methods on
AmazonDynamoDBv2 using the specified AWS account credentials
provider, executor service, and client configuration options.
|
AmazonDynamoDBAsyncClient(AWSCredentialsProvider awsCredentialsProvider,
java.util.concurrent.ExecutorService executorService)
Constructs a new asynchronous client to invoke service methods on
AmazonDynamoDBv2 using the specified AWS account credentials provider
and executor service.
|
AmazonDynamoDBAsyncClient(ClientConfiguration clientConfiguration)
Constructs a new asynchronous client to invoke service methods on
AmazonDynamoDBv2.
|
| Modifier and Type | Method and Description |
|---|---|
java.util.concurrent.Future<BatchGetItemResult> |
batchGetItemAsync(BatchGetItemRequest batchGetItemRequest)
The BatchGetItem operation returns the attributes of one or
more items from one or more tables.
|
java.util.concurrent.Future<BatchGetItemResult> |
batchGetItemAsync(BatchGetItemRequest batchGetItemRequest,
AsyncHandler<BatchGetItemRequest,BatchGetItemResult> asyncHandler)
The BatchGetItem operation returns the attributes of one or
more items from one or more tables.
|
java.util.concurrent.Future<BatchWriteItemResult> |
batchWriteItemAsync(BatchWriteItemRequest batchWriteItemRequest)
The BatchWriteItem operation puts or deletes multiple items in
one or more tables.
|
java.util.concurrent.Future<BatchWriteItemResult> |
batchWriteItemAsync(BatchWriteItemRequest batchWriteItemRequest,
AsyncHandler<BatchWriteItemRequest,BatchWriteItemResult> asyncHandler)
The BatchWriteItem operation puts or deletes multiple items in
one or more tables.
|
java.util.concurrent.Future<CreateTableResult> |
createTableAsync(CreateTableRequest createTableRequest)
The CreateTable operation adds a new table to your account.
|
java.util.concurrent.Future<CreateTableResult> |
createTableAsync(CreateTableRequest createTableRequest,
AsyncHandler<CreateTableRequest,CreateTableResult> asyncHandler)
The CreateTable operation adds a new table to your account.
|
java.util.concurrent.Future<DeleteItemResult> |
deleteItemAsync(DeleteItemRequest deleteItemRequest)
Deletes a single item in a table by primary key.
|
java.util.concurrent.Future<DeleteItemResult> |
deleteItemAsync(DeleteItemRequest deleteItemRequest,
AsyncHandler<DeleteItemRequest,DeleteItemResult> asyncHandler)
Deletes a single item in a table by primary key.
|
java.util.concurrent.Future<DeleteTableResult> |
deleteTableAsync(DeleteTableRequest deleteTableRequest)
The DeleteTable operation deletes a table and all of its
items.
|
java.util.concurrent.Future<DeleteTableResult> |
deleteTableAsync(DeleteTableRequest deleteTableRequest,
AsyncHandler<DeleteTableRequest,DeleteTableResult> asyncHandler)
The DeleteTable operation deletes a table and all of its
items.
|
java.util.concurrent.Future<DescribeTableResult> |
describeTableAsync(DescribeTableRequest describeTableRequest)
Returns information about the table, including the current status of
the table, when it was created, the primary key schema, and any
indexes on the table.
|
java.util.concurrent.Future<DescribeTableResult> |
describeTableAsync(DescribeTableRequest describeTableRequest,
AsyncHandler<DescribeTableRequest,DescribeTableResult> asyncHandler)
Returns information about the table, including the current status of
the table, when it was created, the primary key schema, and any
indexes on the table.
|
java.util.concurrent.ExecutorService |
getExecutorService()
Returns the executor service used by this async client to execute
requests.
|
java.util.concurrent.Future<GetItemResult> |
getItemAsync(GetItemRequest getItemRequest)
The GetItem operation returns a set of attributes for the item
with the given primary key.
|
java.util.concurrent.Future<GetItemResult> |
getItemAsync(GetItemRequest getItemRequest,
AsyncHandler<GetItemRequest,GetItemResult> asyncHandler)
The GetItem operation returns a set of attributes for the item
with the given primary key.
|
java.util.concurrent.Future<ListTablesResult> |
listTablesAsync(ListTablesRequest listTablesRequest)
Returns an array of table names associated with the current account
and endpoint.
|
java.util.concurrent.Future<ListTablesResult> |
listTablesAsync(ListTablesRequest listTablesRequest,
AsyncHandler<ListTablesRequest,ListTablesResult> asyncHandler)
Returns an array of table names associated with the current account
and endpoint.
|
java.util.concurrent.Future<PutItemResult> |
putItemAsync(PutItemRequest putItemRequest)
Creates a new item, or replaces an old item with a new item.
|
java.util.concurrent.Future<PutItemResult> |
putItemAsync(PutItemRequest putItemRequest,
AsyncHandler<PutItemRequest,PutItemResult> asyncHandler)
Creates a new item, or replaces an old item with a new item.
|
java.util.concurrent.Future<QueryResult> |
queryAsync(QueryRequest queryRequest)
A Query operation directly accesses items from a table using
the table primary key, or from an index using the index key.
|
java.util.concurrent.Future<QueryResult> |
queryAsync(QueryRequest queryRequest,
AsyncHandler<QueryRequest,QueryResult> asyncHandler)
A Query operation directly accesses items from a table using
the table primary key, or from an index using the index key.
|
java.util.concurrent.Future<ScanResult> |
scanAsync(ScanRequest scanRequest)
The Scan operation returns one or more items and item
attributes by accessing every item in the table.
|
java.util.concurrent.Future<ScanResult> |
scanAsync(ScanRequest scanRequest,
AsyncHandler<ScanRequest,ScanResult> asyncHandler)
The Scan operation returns one or more items and item
attributes by accessing every item in the table.
|
void |
shutdown()
Shuts down the client, releasing all managed resources.
|
java.util.concurrent.Future<UpdateItemResult> |
updateItemAsync(UpdateItemRequest updateItemRequest)
Edits an existing item's attributes, or inserts a new item if it does
not already exist.
|
java.util.concurrent.Future<UpdateItemResult> |
updateItemAsync(UpdateItemRequest updateItemRequest,
AsyncHandler<UpdateItemRequest,UpdateItemResult> asyncHandler)
Edits an existing item's attributes, or inserts a new item if it does
not already exist.
|
java.util.concurrent.Future<UpdateTableResult> |
updateTableAsync(UpdateTableRequest updateTableRequest)
Updates the provisioned throughput for the given table.
|
java.util.concurrent.Future<UpdateTableResult> |
updateTableAsync(UpdateTableRequest updateTableRequest,
AsyncHandler<UpdateTableRequest,UpdateTableResult> asyncHandler)
Updates the provisioned throughput for the given table.
|
batchGetItem, batchGetItem, batchGetItem, batchWriteItem, batchWriteItem, createTable, createTable, deleteItem, deleteItem, deleteItem, deleteTable, deleteTable, describeTable, describeTable, getCachedResponseMetadata, getItem, getItem, getItem, listTables, listTables, listTables, listTables, listTables, putItem, putItem, putItem, query, scan, scan, scan, scan, setEndpoint, setEndpoint, updateItem, updateItem, updateItem, updateTable, updateTableaddRequestHandler, addRequestHandler, configSigner, configSigner, convertToHttpRequest, createExecutionContext, createExecutionContext, createExecutionContext, endClientExecution, endClientExecution, findRequestMetricCollector, getRequestMetricsCollector, getServiceAbbreviation, getServiceName, getServiceNameIntern, getSigner, getSignerByURI, getSignerRegionOverride, getTimeOffset, isProfilingEnabled, isRequestMetricsEnabled, removeRequestHandler, removeRequestHandler, requestMetricCollector, setConfiguration, setRegion, setServiceNameIntern, setSignerRegionOverride, setTimeOffset, withTimeOffsetclone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, waitbatchGetItem, batchGetItem, batchGetItem, batchWriteItem, batchWriteItem, createTable, createTable, deleteItem, deleteItem, deleteItem, deleteTable, deleteTable, describeTable, describeTable, getCachedResponseMetadata, getItem, getItem, getItem, listTables, listTables, listTables, listTables, listTables, putItem, putItem, putItem, query, scan, scan, scan, scan, setEndpoint, setRegion, updateItem, updateItem, updateItem, updateTable, updateTablepublic AmazonDynamoDBAsyncClient()
All service calls made using this new client object are blocking, and will not return until the service call completes.
DefaultAWSCredentialsProviderChainpublic AmazonDynamoDBAsyncClient(ClientConfiguration clientConfiguration)
All service calls made using this new client object are blocking, and will not return until the service call completes.
clientConfiguration - The client configuration options controlling how this
client connects to AmazonDynamoDBv2
(ex: proxy settings, retry counts, etc.).DefaultAWSCredentialsProviderChainpublic AmazonDynamoDBAsyncClient(AWSCredentials awsCredentials)
All calls made using this new client object are non-blocking, and will immediately return a Java Future object that the caller can later check to see if the service call has actually completed.
awsCredentials - The AWS credentials (access key ID and secret key) to use
when authenticating with AWS services.public AmazonDynamoDBAsyncClient(AWSCredentials awsCredentials, java.util.concurrent.ExecutorService executorService)
All calls made using this new client object are non-blocking, and will immediately return a Java Future object that the caller can later check to see if the service call has actually completed.
awsCredentials - The AWS credentials (access key ID and secret key) to use
when authenticating with AWS services.executorService - The executor service by which all asynchronous requests will
be executed.public AmazonDynamoDBAsyncClient(AWSCredentials awsCredentials, ClientConfiguration clientConfiguration, java.util.concurrent.ExecutorService executorService)
All calls made using this new client object are non-blocking, and will immediately return a Java Future object that the caller can later check to see if the service call has actually completed.
awsCredentials - The AWS credentials (access key ID and secret key) to use
when authenticating with AWS services.clientConfiguration - Client configuration options (ex: max retry limit, proxy
settings, etc).executorService - The executor service by which all asynchronous requests will
be executed.public AmazonDynamoDBAsyncClient(AWSCredentialsProvider awsCredentialsProvider)
All calls made using this new client object are non-blocking, and will immediately return a Java Future object that the caller can later check to see if the service call has actually completed.
awsCredentialsProvider - The AWS credentials provider which will provide credentials
to authenticate requests with AWS services.public AmazonDynamoDBAsyncClient(AWSCredentialsProvider awsCredentialsProvider, java.util.concurrent.ExecutorService executorService)
All calls made using this new client object are non-blocking, and will immediately return a Java Future object that the caller can later check to see if the service call has actually completed.
awsCredentialsProvider - The AWS credentials provider which will provide credentials
to authenticate requests with AWS services.executorService - The executor service by which all asynchronous requests will
be executed.public AmazonDynamoDBAsyncClient(AWSCredentialsProvider awsCredentialsProvider, ClientConfiguration clientConfiguration)
All calls made using this new client object are non-blocking, and will immediately return a Java Future object that the caller can later check to see if the service call has actually completed.
awsCredentialsProvider - The AWS credentials provider which will provide credentials
to authenticate requests with AWS services.clientConfiguration - Client configuration options (ex: max retry limit, proxy
settings, etc).public AmazonDynamoDBAsyncClient(AWSCredentialsProvider awsCredentialsProvider, ClientConfiguration clientConfiguration, java.util.concurrent.ExecutorService executorService)
All calls made using this new client object are non-blocking, and will immediately return a Java Future object that the caller can later check to see if the service call has actually completed.
awsCredentialsProvider - The AWS credentials provider which will provide credentials
to authenticate requests with AWS services.clientConfiguration - Client configuration options (ex: max retry limit, proxy
settings, etc).executorService - The executor service by which all asynchronous requests will
be executed.public java.util.concurrent.ExecutorService getExecutorService()
public void shutdown()
shutdown in interface AmazonDynamoDBshutdown in class AmazonWebServiceClientpublic java.util.concurrent.Future<ScanResult> scanAsync(ScanRequest scanRequest) throws AmazonServiceException, AmazonClientException
The Scan operation returns one or more items and item attributes by accessing every item in the table. To have DynamoDB return fewer items, you can provide a ScanFilter .
If the total number of scanned items exceeds the maximum data set size limit of 1 MB, the scan stops and results are returned to the user with a LastEvaluatedKey to continue the scan in a subsequent operation. The results also include the number of items exceeding the limit. A scan can result in no table data meeting the filter criteria.
The result set is eventually consistent.
By default, Scan operations proceed sequentially; however, for faster performance on large tables, applications can request a parallel Scan by specifying the Segment and TotalSegments parameters. For more information, see Parallel Scan in the Amazon DynamoDB Developer Guide.
scanAsync in interface AmazonDynamoDBAsyncscanRequest - Container for the necessary parameters to execute
the Scan operation on AmazonDynamoDBv2.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonDynamoDBv2 indicating
either a problem with the data in the request, or a server side issue.public java.util.concurrent.Future<ScanResult> scanAsync(ScanRequest scanRequest, AsyncHandler<ScanRequest,ScanResult> asyncHandler) throws AmazonServiceException, AmazonClientException
The Scan operation returns one or more items and item attributes by accessing every item in the table. To have DynamoDB return fewer items, you can provide a ScanFilter .
If the total number of scanned items exceeds the maximum data set size limit of 1 MB, the scan stops and results are returned to the user with a LastEvaluatedKey to continue the scan in a subsequent operation. The results also include the number of items exceeding the limit. A scan can result in no table data meeting the filter criteria.
The result set is eventually consistent.
By default, Scan operations proceed sequentially; however, for faster performance on large tables, applications can request a parallel Scan by specifying the Segment and TotalSegments parameters. For more information, see Parallel Scan in the Amazon DynamoDB Developer Guide.
scanAsync in interface AmazonDynamoDBAsyncscanRequest - Container for the necessary parameters to execute
the Scan operation on AmazonDynamoDBv2.asyncHandler - Asynchronous callback handler for events in the
life-cycle of the request. Users could provide the implementation of
the four callback methods in this interface to process the operation
result or handle the exception.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonDynamoDBv2 indicating
either a problem with the data in the request, or a server side issue.public java.util.concurrent.Future<UpdateTableResult> updateTableAsync(UpdateTableRequest updateTableRequest) throws AmazonServiceException, AmazonClientException
Updates the provisioned throughput for the given table. Setting the throughput for a table helps you manage performance and is part of the provisioned throughput feature of DynamoDB.
The provisioned throughput values can be upgraded or downgraded based on the maximums and minimums listed in the Limits section in the Amazon DynamoDB Developer Guide.
The table must be in the ACTIVE state for this operation
to succeed. UpdateTable is an asynchronous operation; while
executing the operation, the table is in the UPDATING
state. While the table is in the UPDATING state, the
table still has the provisioned throughput from before the call. The
new provisioned throughput setting is in effect only when the table
returns to the ACTIVE state after the UpdateTable
operation.
You cannot add, modify or delete indexes using UpdateTable . Indexes can only be defined at table creation time.
updateTableAsync in interface AmazonDynamoDBAsyncupdateTableRequest - Container for the necessary parameters to
execute the UpdateTable operation on AmazonDynamoDBv2.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonDynamoDBv2 indicating
either a problem with the data in the request, or a server side issue.public java.util.concurrent.Future<UpdateTableResult> updateTableAsync(UpdateTableRequest updateTableRequest, AsyncHandler<UpdateTableRequest,UpdateTableResult> asyncHandler) throws AmazonServiceException, AmazonClientException
Updates the provisioned throughput for the given table. Setting the throughput for a table helps you manage performance and is part of the provisioned throughput feature of DynamoDB.
The provisioned throughput values can be upgraded or downgraded based on the maximums and minimums listed in the Limits section in the Amazon DynamoDB Developer Guide.
The table must be in the ACTIVE state for this operation
to succeed. UpdateTable is an asynchronous operation; while
executing the operation, the table is in the UPDATING
state. While the table is in the UPDATING state, the
table still has the provisioned throughput from before the call. The
new provisioned throughput setting is in effect only when the table
returns to the ACTIVE state after the UpdateTable
operation.
You cannot add, modify or delete indexes using UpdateTable . Indexes can only be defined at table creation time.
updateTableAsync in interface AmazonDynamoDBAsyncupdateTableRequest - Container for the necessary parameters to
execute the UpdateTable operation on AmazonDynamoDBv2.asyncHandler - Asynchronous callback handler for events in the
life-cycle of the request. Users could provide the implementation of
the four callback methods in this interface to process the operation
result or handle the exception.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonDynamoDBv2 indicating
either a problem with the data in the request, or a server side issue.public java.util.concurrent.Future<DeleteTableResult> deleteTableAsync(DeleteTableRequest deleteTableRequest) throws AmazonServiceException, AmazonClientException
The DeleteTable operation deletes a table and all of its
items. After a DeleteTable request, the specified table is in
the DELETING state until DynamoDB completes the deletion.
If the table is in the ACTIVE state, you can delete it.
If a table is in CREATING or UPDATING
states, then DynamoDB returns a ResourceInUseException . If the
specified table does not exist, DynamoDB returns a
ResourceNotFoundException . If table is already in the
DELETING state, no error is returned.
NOTE: DynamoDB might continue to accept data read and write operations, such as GetItem and PutItem, on a table in the DELETING state until the table deletion is complete.
When you delete a table, any indexes on that table are also deleted.
Use the DescribeTable API to check the status of the table.
deleteTableAsync in interface AmazonDynamoDBAsyncdeleteTableRequest - Container for the necessary parameters to
execute the DeleteTable operation on AmazonDynamoDBv2.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonDynamoDBv2 indicating
either a problem with the data in the request, or a server side issue.public java.util.concurrent.Future<DeleteTableResult> deleteTableAsync(DeleteTableRequest deleteTableRequest, AsyncHandler<DeleteTableRequest,DeleteTableResult> asyncHandler) throws AmazonServiceException, AmazonClientException
The DeleteTable operation deletes a table and all of its
items. After a DeleteTable request, the specified table is in
the DELETING state until DynamoDB completes the deletion.
If the table is in the ACTIVE state, you can delete it.
If a table is in CREATING or UPDATING
states, then DynamoDB returns a ResourceInUseException . If the
specified table does not exist, DynamoDB returns a
ResourceNotFoundException . If table is already in the
DELETING state, no error is returned.
NOTE: DynamoDB might continue to accept data read and write operations, such as GetItem and PutItem, on a table in the DELETING state until the table deletion is complete.
When you delete a table, any indexes on that table are also deleted.
Use the DescribeTable API to check the status of the table.
deleteTableAsync in interface AmazonDynamoDBAsyncdeleteTableRequest - Container for the necessary parameters to
execute the DeleteTable operation on AmazonDynamoDBv2.asyncHandler - Asynchronous callback handler for events in the
life-cycle of the request. Users could provide the implementation of
the four callback methods in this interface to process the operation
result or handle the exception.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonDynamoDBv2 indicating
either a problem with the data in the request, or a server side issue.public java.util.concurrent.Future<BatchWriteItemResult> batchWriteItemAsync(BatchWriteItemRequest batchWriteItemRequest) throws AmazonServiceException, AmazonClientException
The BatchWriteItem operation puts or deletes multiple items in one or more tables. A single call to BatchWriteItem can write up to 1 MB of data, which can comprise as many as 25 put or delete requests. Individual items to be written can be as large as 64 KB.
NOTE: BatchWriteItem cannot update items. To update items, use the UpdateItem API.
The individual PutItem and DeleteItem operations specified in BatchWriteItem are atomic; however BatchWriteItem as a whole is not. If any requested operations fail because the table's provisioned throughput is exceeded or an internal processing failure occurs, the failed operations are returned in the UnprocessedItems response parameter. You can investigate and optionally resend the requests. Typically, you would call BatchWriteItem in a loop. Each iteration would check for unprocessed items and submit a new BatchWriteItem request with those unprocessed items until all items have been processed.
Note that if none of the items can be processed due to insufficient provisioned throughput on all of the tables in the request, then BatchGetItem will throw a ProvisionedThroughputExceededException .
To write one item, you can use the PutItem operation; to delete one item, you can use the DeleteItem operation.
With BatchWriteItem , you can efficiently write or delete large amounts of data, such as from Amazon Elastic MapReduce (EMR), or copy data from another database into DynamoDB. In order to improve performance with these large-scale operations, BatchWriteItem does not behave in the same way as individual PutItem and DeleteItem calls would For example, you cannot specify conditions on individual put and delete requests, and BatchWriteItem does not return deleted items in the response.
If you use a programming language that supports concurrency, such as Java, you can use threads to write items in parallel. Your application must include the necessary logic to manage the threads. With languages that don't support threading, such as PHP, you must update or delete the specified items one at a time. In both situations, BatchWriteItem provides an alternative where the API performs the specified put and delete operations in parallel, giving you the power of the thread pool approach without having to introduce complexity into your application.
Parallel processing reduces latency, but each specified put and delete request consumes the same number of write capacity units whether it is processed in parallel or not. Delete operations on nonexistent items consume one write capacity unit.
If one or more of the following is true, DynamoDB rejects the entire batch write operation:
One or more tables specified in the BatchWriteItem request does not exist.
Primary key attributes specified on an item in the request do not match those in the corresponding table's primary key schema.
You try to perform multiple operations on the same item in the same BatchWriteItem request. For example, you cannot put and delete the same item in the same BatchWriteItem request.
The total request size exceeds 1 MB.
Any individual item in a batch exceeds 64 KB.
batchWriteItemAsync in interface AmazonDynamoDBAsyncbatchWriteItemRequest - Container for the necessary parameters to
execute the BatchWriteItem operation on AmazonDynamoDBv2.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonDynamoDBv2 indicating
either a problem with the data in the request, or a server side issue.public java.util.concurrent.Future<BatchWriteItemResult> batchWriteItemAsync(BatchWriteItemRequest batchWriteItemRequest, AsyncHandler<BatchWriteItemRequest,BatchWriteItemResult> asyncHandler) throws AmazonServiceException, AmazonClientException
The BatchWriteItem operation puts or deletes multiple items in one or more tables. A single call to BatchWriteItem can write up to 1 MB of data, which can comprise as many as 25 put or delete requests. Individual items to be written can be as large as 64 KB.
NOTE: BatchWriteItem cannot update items. To update items, use the UpdateItem API.
The individual PutItem and DeleteItem operations specified in BatchWriteItem are atomic; however BatchWriteItem as a whole is not. If any requested operations fail because the table's provisioned throughput is exceeded or an internal processing failure occurs, the failed operations are returned in the UnprocessedItems response parameter. You can investigate and optionally resend the requests. Typically, you would call BatchWriteItem in a loop. Each iteration would check for unprocessed items and submit a new BatchWriteItem request with those unprocessed items until all items have been processed.
Note that if none of the items can be processed due to insufficient provisioned throughput on all of the tables in the request, then BatchGetItem will throw a ProvisionedThroughputExceededException .
To write one item, you can use the PutItem operation; to delete one item, you can use the DeleteItem operation.
With BatchWriteItem , you can efficiently write or delete large amounts of data, such as from Amazon Elastic MapReduce (EMR), or copy data from another database into DynamoDB. In order to improve performance with these large-scale operations, BatchWriteItem does not behave in the same way as individual PutItem and DeleteItem calls would For example, you cannot specify conditions on individual put and delete requests, and BatchWriteItem does not return deleted items in the response.
If you use a programming language that supports concurrency, such as Java, you can use threads to write items in parallel. Your application must include the necessary logic to manage the threads. With languages that don't support threading, such as PHP, you must update or delete the specified items one at a time. In both situations, BatchWriteItem provides an alternative where the API performs the specified put and delete operations in parallel, giving you the power of the thread pool approach without having to introduce complexity into your application.
Parallel processing reduces latency, but each specified put and delete request consumes the same number of write capacity units whether it is processed in parallel or not. Delete operations on nonexistent items consume one write capacity unit.
If one or more of the following is true, DynamoDB rejects the entire batch write operation:
One or more tables specified in the BatchWriteItem request does not exist.
Primary key attributes specified on an item in the request do not match those in the corresponding table's primary key schema.
You try to perform multiple operations on the same item in the same BatchWriteItem request. For example, you cannot put and delete the same item in the same BatchWriteItem request.
The total request size exceeds 1 MB.
Any individual item in a batch exceeds 64 KB.
batchWriteItemAsync in interface AmazonDynamoDBAsyncbatchWriteItemRequest - Container for the necessary parameters to
execute the BatchWriteItem operation on AmazonDynamoDBv2.asyncHandler - Asynchronous callback handler for events in the
life-cycle of the request. Users could provide the implementation of
the four callback methods in this interface to process the operation
result or handle the exception.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonDynamoDBv2 indicating
either a problem with the data in the request, or a server side issue.public java.util.concurrent.Future<DescribeTableResult> describeTableAsync(DescribeTableRequest describeTableRequest) throws AmazonServiceException, AmazonClientException
Returns information about the table, including the current status of the table, when it was created, the primary key schema, and any indexes on the table.
describeTableAsync in interface AmazonDynamoDBAsyncdescribeTableRequest - Container for the necessary parameters to
execute the DescribeTable operation on AmazonDynamoDBv2.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonDynamoDBv2 indicating
either a problem with the data in the request, or a server side issue.public java.util.concurrent.Future<DescribeTableResult> describeTableAsync(DescribeTableRequest describeTableRequest, AsyncHandler<DescribeTableRequest,DescribeTableResult> asyncHandler) throws AmazonServiceException, AmazonClientException
Returns information about the table, including the current status of the table, when it was created, the primary key schema, and any indexes on the table.
describeTableAsync in interface AmazonDynamoDBAsyncdescribeTableRequest - Container for the necessary parameters to
execute the DescribeTable operation on AmazonDynamoDBv2.asyncHandler - Asynchronous callback handler for events in the
life-cycle of the request. Users could provide the implementation of
the four callback methods in this interface to process the operation
result or handle the exception.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonDynamoDBv2 indicating
either a problem with the data in the request, or a server side issue.public java.util.concurrent.Future<GetItemResult> getItemAsync(GetItemRequest getItemRequest) throws AmazonServiceException, AmazonClientException
The GetItem operation returns a set of attributes for the item with the given primary key. If there is no matching item, GetItem does not return any data.
GetItem provides an eventually consistent read by default. If
your application requires a strongly consistent read, set
ConsistentRead to true . Although a strongly
consistent read might take more time than an eventually consistent
read, it always returns the last updated value.
getItemAsync in interface AmazonDynamoDBAsyncgetItemRequest - Container for the necessary parameters to
execute the GetItem operation on AmazonDynamoDBv2.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonDynamoDBv2 indicating
either a problem with the data in the request, or a server side issue.public java.util.concurrent.Future<GetItemResult> getItemAsync(GetItemRequest getItemRequest, AsyncHandler<GetItemRequest,GetItemResult> asyncHandler) throws AmazonServiceException, AmazonClientException
The GetItem operation returns a set of attributes for the item with the given primary key. If there is no matching item, GetItem does not return any data.
GetItem provides an eventually consistent read by default. If
your application requires a strongly consistent read, set
ConsistentRead to true . Although a strongly
consistent read might take more time than an eventually consistent
read, it always returns the last updated value.
getItemAsync in interface AmazonDynamoDBAsyncgetItemRequest - Container for the necessary parameters to
execute the GetItem operation on AmazonDynamoDBv2.asyncHandler - Asynchronous callback handler for events in the
life-cycle of the request. Users could provide the implementation of
the four callback methods in this interface to process the operation
result or handle the exception.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonDynamoDBv2 indicating
either a problem with the data in the request, or a server side issue.public java.util.concurrent.Future<DeleteItemResult> deleteItemAsync(DeleteItemRequest deleteItemRequest) throws AmazonServiceException, AmazonClientException
Deletes a single item in a table by primary key. You can perform a conditional delete operation that deletes the item if it exists, or if it has an expected attribute value.
In addition to deleting an item, you can also return the item's attribute values in the same operation, using the ReturnValues parameter.
Unless you specify conditions, the DeleteItem is an idempotent operation; running it multiple times on the same item or attribute does not result in an error response.
Conditional deletes are useful for only deleting items if specific conditions are met. If those conditions are met, DynamoDB performs the delete. Otherwise, the item is not deleted.
deleteItemAsync in interface AmazonDynamoDBAsyncdeleteItemRequest - Container for the necessary parameters to
execute the DeleteItem operation on AmazonDynamoDBv2.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonDynamoDBv2 indicating
either a problem with the data in the request, or a server side issue.public java.util.concurrent.Future<DeleteItemResult> deleteItemAsync(DeleteItemRequest deleteItemRequest, AsyncHandler<DeleteItemRequest,DeleteItemResult> asyncHandler) throws AmazonServiceException, AmazonClientException
Deletes a single item in a table by primary key. You can perform a conditional delete operation that deletes the item if it exists, or if it has an expected attribute value.
In addition to deleting an item, you can also return the item's attribute values in the same operation, using the ReturnValues parameter.
Unless you specify conditions, the DeleteItem is an idempotent operation; running it multiple times on the same item or attribute does not result in an error response.
Conditional deletes are useful for only deleting items if specific conditions are met. If those conditions are met, DynamoDB performs the delete. Otherwise, the item is not deleted.
deleteItemAsync in interface AmazonDynamoDBAsyncdeleteItemRequest - Container for the necessary parameters to
execute the DeleteItem operation on AmazonDynamoDBv2.asyncHandler - Asynchronous callback handler for events in the
life-cycle of the request. Users could provide the implementation of
the four callback methods in this interface to process the operation
result or handle the exception.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonDynamoDBv2 indicating
either a problem with the data in the request, or a server side issue.public java.util.concurrent.Future<CreateTableResult> createTableAsync(CreateTableRequest createTableRequest) throws AmazonServiceException, AmazonClientException
The CreateTable operation adds a new table to your account. In an AWS account, table names must be unique within each region. That is, you can have two tables with same name if you create the tables in different regions.
CreateTable is an asynchronous operation. Upon receiving a
CreateTable request, DynamoDB immediately returns a response
with a TableStatus of CREATING . After the table
is created, DynamoDB sets the TableStatus to
ACTIVE . You can perform read and write operations only
on an ACTIVE table.
If you want to create multiple tables with secondary indexes on them,
you must create them sequentially. Only one table with secondary
indexes can be in the CREATING state at any given time.
You can use the DescribeTable API to check the table status.
createTableAsync in interface AmazonDynamoDBAsynccreateTableRequest - Container for the necessary parameters to
execute the CreateTable operation on AmazonDynamoDBv2.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonDynamoDBv2 indicating
either a problem with the data in the request, or a server side issue.public java.util.concurrent.Future<CreateTableResult> createTableAsync(CreateTableRequest createTableRequest, AsyncHandler<CreateTableRequest,CreateTableResult> asyncHandler) throws AmazonServiceException, AmazonClientException
The CreateTable operation adds a new table to your account. In an AWS account, table names must be unique within each region. That is, you can have two tables with same name if you create the tables in different regions.
CreateTable is an asynchronous operation. Upon receiving a
CreateTable request, DynamoDB immediately returns a response
with a TableStatus of CREATING . After the table
is created, DynamoDB sets the TableStatus to
ACTIVE . You can perform read and write operations only
on an ACTIVE table.
If you want to create multiple tables with secondary indexes on them,
you must create them sequentially. Only one table with secondary
indexes can be in the CREATING state at any given time.
You can use the DescribeTable API to check the table status.
createTableAsync in interface AmazonDynamoDBAsynccreateTableRequest - Container for the necessary parameters to
execute the CreateTable operation on AmazonDynamoDBv2.asyncHandler - Asynchronous callback handler for events in the
life-cycle of the request. Users could provide the implementation of
the four callback methods in this interface to process the operation
result or handle the exception.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonDynamoDBv2 indicating
either a problem with the data in the request, or a server side issue.public java.util.concurrent.Future<QueryResult> queryAsync(QueryRequest queryRequest) throws AmazonServiceException, AmazonClientException
A Query operation directly accesses items from a table using the table primary key, or from an index using the index key. You must provide a specific hash key value. You can narrow the scope of the query by using comparison operators on the range key value, or on the index key. You can use the ScanIndexForward parameter to get results in forward or reverse order, by range key or by index key.
Queries that do not return results consume the minimum read capacity units according to the type of read.
If the total number of items meeting the query criteria exceeds the result set size limit of 1 MB, the query stops and results are returned to the user with a LastEvaluatedKey to continue the query in a subsequent operation. Unlike a Scan operation, a Query operation never returns an empty result set and a LastEvaluatedKey . The LastEvaluatedKey is only provided if the results exceed 1 MB, or if you have used Limit .
You can query a table, a local secondary index, or a global secondary index. For a query on a table or on a local secondary index, you can set ConsistentRead to true and obtain a strongly consistent result. Global secondary indexes support eventually consistent reads only, so do not specify ConsistentRead when querying a global secondary index.
queryAsync in interface AmazonDynamoDBAsyncqueryRequest - Container for the necessary parameters to execute
the Query operation on AmazonDynamoDBv2.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonDynamoDBv2 indicating
either a problem with the data in the request, or a server side issue.public java.util.concurrent.Future<QueryResult> queryAsync(QueryRequest queryRequest, AsyncHandler<QueryRequest,QueryResult> asyncHandler) throws AmazonServiceException, AmazonClientException
A Query operation directly accesses items from a table using the table primary key, or from an index using the index key. You must provide a specific hash key value. You can narrow the scope of the query by using comparison operators on the range key value, or on the index key. You can use the ScanIndexForward parameter to get results in forward or reverse order, by range key or by index key.
Queries that do not return results consume the minimum read capacity units according to the type of read.
If the total number of items meeting the query criteria exceeds the result set size limit of 1 MB, the query stops and results are returned to the user with a LastEvaluatedKey to continue the query in a subsequent operation. Unlike a Scan operation, a Query operation never returns an empty result set and a LastEvaluatedKey . The LastEvaluatedKey is only provided if the results exceed 1 MB, or if you have used Limit .
You can query a table, a local secondary index, or a global secondary index. For a query on a table or on a local secondary index, you can set ConsistentRead to true and obtain a strongly consistent result. Global secondary indexes support eventually consistent reads only, so do not specify ConsistentRead when querying a global secondary index.
queryAsync in interface AmazonDynamoDBAsyncqueryRequest - Container for the necessary parameters to execute
the Query operation on AmazonDynamoDBv2.asyncHandler - Asynchronous callback handler for events in the
life-cycle of the request. Users could provide the implementation of
the four callback methods in this interface to process the operation
result or handle the exception.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonDynamoDBv2 indicating
either a problem with the data in the request, or a server side issue.public java.util.concurrent.Future<PutItemResult> putItemAsync(PutItemRequest putItemRequest) throws AmazonServiceException, AmazonClientException
Creates a new item, or replaces an old item with a new item. If an item already exists in the specified table with the same primary key, the new item completely replaces the existing item. You can perform a conditional put (insert a new item if one with the specified primary key doesn't exist), or replace an existing item if it has certain attribute values.
In addition to putting an item, you can also return the item's attribute values in the same operation, using the ReturnValues parameter.
When you add an item, the primary key attribute(s) are the only required attributes. Attribute values cannot be null. String and binary type attributes must have lengths greater than zero. Set type attributes cannot be empty. Requests with empty values will be rejected with a ValidationException .
You can request that PutItem return either a copy of the old item (before the update) or a copy of the new item (after the update). For more information, see the ReturnValues description.
NOTE: To prevent a new item from replacing an existing item, use a conditional put operation with ComparisonOperator set to NULL for the primary key attribute, or attributes.
For more information about using this API, see Working with Items in the Amazon DynamoDB Developer Guide.
putItemAsync in interface AmazonDynamoDBAsyncputItemRequest - Container for the necessary parameters to
execute the PutItem operation on AmazonDynamoDBv2.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonDynamoDBv2 indicating
either a problem with the data in the request, or a server side issue.public java.util.concurrent.Future<PutItemResult> putItemAsync(PutItemRequest putItemRequest, AsyncHandler<PutItemRequest,PutItemResult> asyncHandler) throws AmazonServiceException, AmazonClientException
Creates a new item, or replaces an old item with a new item. If an item already exists in the specified table with the same primary key, the new item completely replaces the existing item. You can perform a conditional put (insert a new item if one with the specified primary key doesn't exist), or replace an existing item if it has certain attribute values.
In addition to putting an item, you can also return the item's attribute values in the same operation, using the ReturnValues parameter.
When you add an item, the primary key attribute(s) are the only required attributes. Attribute values cannot be null. String and binary type attributes must have lengths greater than zero. Set type attributes cannot be empty. Requests with empty values will be rejected with a ValidationException .
You can request that PutItem return either a copy of the old item (before the update) or a copy of the new item (after the update). For more information, see the ReturnValues description.
NOTE: To prevent a new item from replacing an existing item, use a conditional put operation with ComparisonOperator set to NULL for the primary key attribute, or attributes.
For more information about using this API, see Working with Items in the Amazon DynamoDB Developer Guide.
putItemAsync in interface AmazonDynamoDBAsyncputItemRequest - Container for the necessary parameters to
execute the PutItem operation on AmazonDynamoDBv2.asyncHandler - Asynchronous callback handler for events in the
life-cycle of the request. Users could provide the implementation of
the four callback methods in this interface to process the operation
result or handle the exception.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonDynamoDBv2 indicating
either a problem with the data in the request, or a server side issue.public java.util.concurrent.Future<ListTablesResult> listTablesAsync(ListTablesRequest listTablesRequest) throws AmazonServiceException, AmazonClientException
Returns an array of table names associated with the current account and endpoint. The output from ListTables is paginated, with each page returning a maximum of 100 table names.
listTablesAsync in interface AmazonDynamoDBAsynclistTablesRequest - Container for the necessary parameters to
execute the ListTables operation on AmazonDynamoDBv2.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonDynamoDBv2 indicating
either a problem with the data in the request, or a server side issue.public java.util.concurrent.Future<ListTablesResult> listTablesAsync(ListTablesRequest listTablesRequest, AsyncHandler<ListTablesRequest,ListTablesResult> asyncHandler) throws AmazonServiceException, AmazonClientException
Returns an array of table names associated with the current account and endpoint. The output from ListTables is paginated, with each page returning a maximum of 100 table names.
listTablesAsync in interface AmazonDynamoDBAsynclistTablesRequest - Container for the necessary parameters to
execute the ListTables operation on AmazonDynamoDBv2.asyncHandler - Asynchronous callback handler for events in the
life-cycle of the request. Users could provide the implementation of
the four callback methods in this interface to process the operation
result or handle the exception.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonDynamoDBv2 indicating
either a problem with the data in the request, or a server side issue.public java.util.concurrent.Future<UpdateItemResult> updateItemAsync(UpdateItemRequest updateItemRequest) throws AmazonServiceException, AmazonClientException
Edits an existing item's attributes, or inserts a new item if it does not already exist. You can put, delete, or add attribute values. You can also perform a conditional update (insert a new attribute name-value pair if it doesn't exist, or replace an existing name-value pair if it has certain expected attribute values).
In addition to updating an item, you can also return the item's attribute values in the same operation, using the ReturnValues parameter.
updateItemAsync in interface AmazonDynamoDBAsyncupdateItemRequest - Container for the necessary parameters to
execute the UpdateItem operation on AmazonDynamoDBv2.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonDynamoDBv2 indicating
either a problem with the data in the request, or a server side issue.public java.util.concurrent.Future<UpdateItemResult> updateItemAsync(UpdateItemRequest updateItemRequest, AsyncHandler<UpdateItemRequest,UpdateItemResult> asyncHandler) throws AmazonServiceException, AmazonClientException
Edits an existing item's attributes, or inserts a new item if it does not already exist. You can put, delete, or add attribute values. You can also perform a conditional update (insert a new attribute name-value pair if it doesn't exist, or replace an existing name-value pair if it has certain expected attribute values).
In addition to updating an item, you can also return the item's attribute values in the same operation, using the ReturnValues parameter.
updateItemAsync in interface AmazonDynamoDBAsyncupdateItemRequest - Container for the necessary parameters to
execute the UpdateItem operation on AmazonDynamoDBv2.asyncHandler - Asynchronous callback handler for events in the
life-cycle of the request. Users could provide the implementation of
the four callback methods in this interface to process the operation
result or handle the exception.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonDynamoDBv2 indicating
either a problem with the data in the request, or a server side issue.public java.util.concurrent.Future<BatchGetItemResult> batchGetItemAsync(BatchGetItemRequest batchGetItemRequest) throws AmazonServiceException, AmazonClientException
The BatchGetItem operation returns the attributes of one or more items from one or more tables. You identify requested items by primary key.
A single operation can retrieve up to 1 MB of data, which can contain as many as 100 items. BatchGetItem will return a partial result if the response size limit is exceeded, the table's provisioned throughput is exceeded, or an internal processing failure occurs. If a partial result is returned, the operation returns a value for UnprocessedKeys . You can use this value to retry the operation starting with the next item to get.
For example, if you ask to retrieve 100 items, but each individual item is 50 KB in size, the system returns 20 items (1 MB) and an appropriate UnprocessedKeys value so you can get the next page of results. If desired, your application can include its own logic to assemble the pages of results into one dataset.
If none of the items can be processed due to insufficient provisioned throughput on all of the tables in the request, then BatchGetItem will throw a ProvisionedThroughputExceededException . If at least one of the items is successfully processed, then BatchGetItem completes successfully, while returning the keys of the unread items in UnprocessedKeys .
By default, BatchGetItem performs eventually consistent reads
on every table in the request. If you want strongly consistent reads
instead, you can set ConsistentRead to true for
any or all tables.
In order to minimize response latency, BatchGetItem retrieves items in parallel.
When designing your application, keep in mind that DynamoDB does not return attributes in any particular order. To help parse the response by item, include the primary key values for the items in your request in the AttributesToGet parameter.
If a requested item does not exist, it is not returned in the result. Requests for nonexistent items consume the minimum read capacity units according to the type of read. For more information, see Capacity Units Calculations in the Amazon DynamoDB Developer Guide.
batchGetItemAsync in interface AmazonDynamoDBAsyncbatchGetItemRequest - Container for the necessary parameters to
execute the BatchGetItem operation on AmazonDynamoDBv2.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonDynamoDBv2 indicating
either a problem with the data in the request, or a server side issue.public java.util.concurrent.Future<BatchGetItemResult> batchGetItemAsync(BatchGetItemRequest batchGetItemRequest, AsyncHandler<BatchGetItemRequest,BatchGetItemResult> asyncHandler) throws AmazonServiceException, AmazonClientException
The BatchGetItem operation returns the attributes of one or more items from one or more tables. You identify requested items by primary key.
A single operation can retrieve up to 1 MB of data, which can contain as many as 100 items. BatchGetItem will return a partial result if the response size limit is exceeded, the table's provisioned throughput is exceeded, or an internal processing failure occurs. If a partial result is returned, the operation returns a value for UnprocessedKeys . You can use this value to retry the operation starting with the next item to get.
For example, if you ask to retrieve 100 items, but each individual item is 50 KB in size, the system returns 20 items (1 MB) and an appropriate UnprocessedKeys value so you can get the next page of results. If desired, your application can include its own logic to assemble the pages of results into one dataset.
If none of the items can be processed due to insufficient provisioned throughput on all of the tables in the request, then BatchGetItem will throw a ProvisionedThroughputExceededException . If at least one of the items is successfully processed, then BatchGetItem completes successfully, while returning the keys of the unread items in UnprocessedKeys .
By default, BatchGetItem performs eventually consistent reads
on every table in the request. If you want strongly consistent reads
instead, you can set ConsistentRead to true for
any or all tables.
In order to minimize response latency, BatchGetItem retrieves items in parallel.
When designing your application, keep in mind that DynamoDB does not return attributes in any particular order. To help parse the response by item, include the primary key values for the items in your request in the AttributesToGet parameter.
If a requested item does not exist, it is not returned in the result. Requests for nonexistent items consume the minimum read capacity units according to the type of read. For more information, see Capacity Units Calculations in the Amazon DynamoDB Developer Guide.
batchGetItemAsync in interface AmazonDynamoDBAsyncbatchGetItemRequest - Container for the necessary parameters to
execute the BatchGetItem operation on AmazonDynamoDBv2.asyncHandler - Asynchronous callback handler for events in the
life-cycle of the request. Users could provide the implementation of
the four callback methods in this interface to process the operation
result or handle the exception.AmazonClientException - If any internal errors are encountered inside the client while
attempting to make the request or handle the response. For example
if a network connection is not available.AmazonServiceException - If an error response is returned by AmazonDynamoDBv2 indicating
either a problem with the data in the request, or a server side issue.