Package com.google.spanner.v1

Class ExecuteBatchDmlResponse.Builder

  • All Implemented Interfaces:
    com.google.protobuf.Message.Builder, com.google.protobuf.MessageLite.Builder, com.google.protobuf.MessageLiteOrBuilder, com.google.protobuf.MessageOrBuilder, ExecuteBatchDmlResponseOrBuilder, Cloneable
    Enclosing class:
    ExecuteBatchDmlResponse
    public static final class ExecuteBatchDmlResponse.Builder
extends com.google.protobuf.GeneratedMessageV3.Builder<ExecuteBatchDmlResponse.Builder>
implements ExecuteBatchDmlResponseOrBuilder
     The response for [ExecuteBatchDml][google.spanner.v1.Spanner.ExecuteBatchDml]. Contains a list
 of [ResultSet][google.spanner.v1.ResultSet] messages, one for each DML statement that has successfully
 executed, in the same order as the statements in the request. If a statement
 fails, the status in the response body identifies the cause of the failure.
 To check for DML statements that failed, use the following approach:
 1. Check the status in the response message. The [google.rpc.Code][google.rpc.Code] enum
    value `OK` indicates that all statements were executed successfully.
 2. If the status was not `OK`, check the number of result sets in the
    response. If the response contains `N` [ResultSet][google.spanner.v1.ResultSet] messages, then
    statement `N+1` in the request failed.
 Example 1:
 * Request: 5 DML statements, all executed successfully.
 * Response: 5 [ResultSet][google.spanner.v1.ResultSet] messages, with the status `OK`.
 Example 2:
 * Request: 5 DML statements. The third statement has a syntax error.
 * Response: 2 [ResultSet][google.spanner.v1.ResultSet] messages, and a syntax error (`INVALID_ARGUMENT`)
   status. The number of [ResultSet][google.spanner.v1.ResultSet] messages indicates that the third
   statement failed, and the fourth and fifth statements were not executed.
    Protobuf type google.spanner.v1.ExecuteBatchDmlResponse

    • Method Detail

      • getDescriptor

        public static final com.google.protobuf.Descriptors.Descriptor getDescriptor()

      • internalGetFieldAccessorTable

        protected com.google.protobuf.GeneratedMessageV3.FieldAccessorTable internalGetFieldAccessorTable()
        Specified by:
        internalGetFieldAccessorTable in class com.google.protobuf.GeneratedMessageV3.Builder<ExecuteBatchDmlResponse.Builder>

      • clear

        public ExecuteBatchDmlResponse.Builder clear()
        Specified by:
        clear in interface com.google.protobuf.Message.Builder
        Specified by:
        clear in interface com.google.protobuf.MessageLite.Builder
        Overrides:
        clear in class com.google.protobuf.GeneratedMessageV3.Builder<ExecuteBatchDmlResponse.Builder>

      • getDescriptorForType

        public com.google.protobuf.Descriptors.Descriptor getDescriptorForType()
        Specified by:
        getDescriptorForType in interface com.google.protobuf.Message.Builder
        Specified by:
        getDescriptorForType in interface com.google.protobuf.MessageOrBuilder
        Overrides:
        getDescriptorForType in class com.google.protobuf.GeneratedMessageV3.Builder<ExecuteBatchDmlResponse.Builder>

      • getDefaultInstanceForType

        public ExecuteBatchDmlResponse getDefaultInstanceForType()
        Specified by:
        getDefaultInstanceForType in interface com.google.protobuf.MessageLiteOrBuilder
        Specified by:
        getDefaultInstanceForType in interface com.google.protobuf.MessageOrBuilder

      • build

        public ExecuteBatchDmlResponse build()
        Specified by:
        build in interface com.google.protobuf.Message.Builder
        Specified by:
        build in interface com.google.protobuf.MessageLite.Builder

      • buildPartial

        public ExecuteBatchDmlResponse buildPartial()
        Specified by:
        buildPartial in interface com.google.protobuf.Message.Builder
        Specified by:
        buildPartial in interface com.google.protobuf.MessageLite.Builder

      • clone

        public ExecuteBatchDmlResponse.Builder clone()
        Specified by:
        clone in interface com.google.protobuf.Message.Builder
        Specified by:
        clone in interface com.google.protobuf.MessageLite.Builder
        Overrides:
        clone in class com.google.protobuf.GeneratedMessageV3.Builder<ExecuteBatchDmlResponse.Builder>

      • clearField

        public ExecuteBatchDmlResponse.Builder clearField​(com.google.protobuf.Descriptors.FieldDescriptor field)
        Specified by:
        clearField in interface com.google.protobuf.Message.Builder
        Overrides:
        clearField in class com.google.protobuf.GeneratedMessageV3.Builder<ExecuteBatchDmlResponse.Builder>

      • clearOneof

        public ExecuteBatchDmlResponse.Builder clearOneof​(com.google.protobuf.Descriptors.OneofDescriptor oneof)
        Specified by:
        clearOneof in interface com.google.protobuf.Message.Builder
        Overrides:
        clearOneof in class com.google.protobuf.GeneratedMessageV3.Builder<ExecuteBatchDmlResponse.Builder>

      • setRepeatedField

        public ExecuteBatchDmlResponse.Builder setRepeatedField​(com.google.protobuf.Descriptors.FieldDescriptor field,
                                                        int index,
                                                        Object value)
        Specified by:
        setRepeatedField in interface com.google.protobuf.Message.Builder
        Overrides:
        setRepeatedField in class com.google.protobuf.GeneratedMessageV3.Builder<ExecuteBatchDmlResponse.Builder>

      • addRepeatedField

        public ExecuteBatchDmlResponse.Builder addRepeatedField​(com.google.protobuf.Descriptors.FieldDescriptor field,
                                                        Object value)
        Specified by:
        addRepeatedField in interface com.google.protobuf.Message.Builder
        Overrides:
        addRepeatedField in class com.google.protobuf.GeneratedMessageV3.Builder<ExecuteBatchDmlResponse.Builder>

      • isInitialized

        public final boolean isInitialized()
        Specified by:
        isInitialized in interface com.google.protobuf.MessageLiteOrBuilder
        Overrides:
        isInitialized in class com.google.protobuf.GeneratedMessageV3.Builder<ExecuteBatchDmlResponse.Builder>

      • mergeFrom

        public ExecuteBatchDmlResponse.Builder mergeFrom​(com.google.protobuf.CodedInputStream input,
                                                 com.google.protobuf.ExtensionRegistryLite extensionRegistry)
                                          throws IOException
        Specified by:
        mergeFrom in interface com.google.protobuf.Message.Builder
        Specified by:
        mergeFrom in interface com.google.protobuf.MessageLite.Builder
        Overrides:
        mergeFrom in class com.google.protobuf.AbstractMessage.Builder<ExecuteBatchDmlResponse.Builder>
        Throws:
        IOException

      • getResultSetsList

        public List<ResultSet> getResultSetsList()
         One [ResultSet][google.spanner.v1.ResultSet] for each statement in the request that ran successfully,
 in the same order as the statements in the request. Each [ResultSet][google.spanner.v1.ResultSet] does
 not contain any rows. The [ResultSetStats][google.spanner.v1.ResultSetStats] in each [ResultSet][google.spanner.v1.ResultSet] contain
 the number of rows modified by the statement.
 Only the first [ResultSet][google.spanner.v1.ResultSet] in the response contains valid
 [ResultSetMetadata][google.spanner.v1.ResultSetMetadata].
        repeated .google.spanner.v1.ResultSet result_sets = 1;
        Specified by:
        getResultSetsList in interface ExecuteBatchDmlResponseOrBuilder

      • getResultSetsCount

        public int getResultSetsCount()
         One [ResultSet][google.spanner.v1.ResultSet] for each statement in the request that ran successfully,
 in the same order as the statements in the request. Each [ResultSet][google.spanner.v1.ResultSet] does
 not contain any rows. The [ResultSetStats][google.spanner.v1.ResultSetStats] in each [ResultSet][google.spanner.v1.ResultSet] contain
 the number of rows modified by the statement.
 Only the first [ResultSet][google.spanner.v1.ResultSet] in the response contains valid
 [ResultSetMetadata][google.spanner.v1.ResultSetMetadata].
        repeated .google.spanner.v1.ResultSet result_sets = 1;
        Specified by:
        getResultSetsCount in interface ExecuteBatchDmlResponseOrBuilder

      • getResultSets

        public ResultSet getResultSets​(int index)
         One [ResultSet][google.spanner.v1.ResultSet] for each statement in the request that ran successfully,
 in the same order as the statements in the request. Each [ResultSet][google.spanner.v1.ResultSet] does
 not contain any rows. The [ResultSetStats][google.spanner.v1.ResultSetStats] in each [ResultSet][google.spanner.v1.ResultSet] contain
 the number of rows modified by the statement.
 Only the first [ResultSet][google.spanner.v1.ResultSet] in the response contains valid
 [ResultSetMetadata][google.spanner.v1.ResultSetMetadata].
        repeated .google.spanner.v1.ResultSet result_sets = 1;
        Specified by:
        getResultSets in interface ExecuteBatchDmlResponseOrBuilder

      • setResultSets

        public ExecuteBatchDmlResponse.Builder setResultSets​(int index,
                                                     ResultSet value)
         One [ResultSet][google.spanner.v1.ResultSet] for each statement in the request that ran successfully,
 in the same order as the statements in the request. Each [ResultSet][google.spanner.v1.ResultSet] does
 not contain any rows. The [ResultSetStats][google.spanner.v1.ResultSetStats] in each [ResultSet][google.spanner.v1.ResultSet] contain
 the number of rows modified by the statement.
 Only the first [ResultSet][google.spanner.v1.ResultSet] in the response contains valid
 [ResultSetMetadata][google.spanner.v1.ResultSetMetadata].
        repeated .google.spanner.v1.ResultSet result_sets = 1;

      • setResultSets

        public ExecuteBatchDmlResponse.Builder setResultSets​(int index,
                                                     ResultSet.Builder builderForValue)
         One [ResultSet][google.spanner.v1.ResultSet] for each statement in the request that ran successfully,
 in the same order as the statements in the request. Each [ResultSet][google.spanner.v1.ResultSet] does
 not contain any rows. The [ResultSetStats][google.spanner.v1.ResultSetStats] in each [ResultSet][google.spanner.v1.ResultSet] contain
 the number of rows modified by the statement.
 Only the first [ResultSet][google.spanner.v1.ResultSet] in the response contains valid
 [ResultSetMetadata][google.spanner.v1.ResultSetMetadata].
        repeated .google.spanner.v1.ResultSet result_sets = 1;

      • addResultSets

        public ExecuteBatchDmlResponse.Builder addResultSets​(ResultSet value)
         One [ResultSet][google.spanner.v1.ResultSet] for each statement in the request that ran successfully,
 in the same order as the statements in the request. Each [ResultSet][google.spanner.v1.ResultSet] does
 not contain any rows. The [ResultSetStats][google.spanner.v1.ResultSetStats] in each [ResultSet][google.spanner.v1.ResultSet] contain
 the number of rows modified by the statement.
 Only the first [ResultSet][google.spanner.v1.ResultSet] in the response contains valid
 [ResultSetMetadata][google.spanner.v1.ResultSetMetadata].
        repeated .google.spanner.v1.ResultSet result_sets = 1;

      • addResultSets

        public ExecuteBatchDmlResponse.Builder addResultSets​(int index,
                                                     ResultSet value)
         One [ResultSet][google.spanner.v1.ResultSet] for each statement in the request that ran successfully,
 in the same order as the statements in the request. Each [ResultSet][google.spanner.v1.ResultSet] does
 not contain any rows. The [ResultSetStats][google.spanner.v1.ResultSetStats] in each [ResultSet][google.spanner.v1.ResultSet] contain
 the number of rows modified by the statement.
 Only the first [ResultSet][google.spanner.v1.ResultSet] in the response contains valid
 [ResultSetMetadata][google.spanner.v1.ResultSetMetadata].
        repeated .google.spanner.v1.ResultSet result_sets = 1;

      • addResultSets

        public ExecuteBatchDmlResponse.Builder addResultSets​(ResultSet.Builder builderForValue)
         One [ResultSet][google.spanner.v1.ResultSet] for each statement in the request that ran successfully,
 in the same order as the statements in the request. Each [ResultSet][google.spanner.v1.ResultSet] does
 not contain any rows. The [ResultSetStats][google.spanner.v1.ResultSetStats] in each [ResultSet][google.spanner.v1.ResultSet] contain
 the number of rows modified by the statement.
 Only the first [ResultSet][google.spanner.v1.ResultSet] in the response contains valid
 [ResultSetMetadata][google.spanner.v1.ResultSetMetadata].
        repeated .google.spanner.v1.ResultSet result_sets = 1;

      • addResultSets

        public ExecuteBatchDmlResponse.Builder addResultSets​(int index,
                                                     ResultSet.Builder builderForValue)
         One [ResultSet][google.spanner.v1.ResultSet] for each statement in the request that ran successfully,
 in the same order as the statements in the request. Each [ResultSet][google.spanner.v1.ResultSet] does
 not contain any rows. The [ResultSetStats][google.spanner.v1.ResultSetStats] in each [ResultSet][google.spanner.v1.ResultSet] contain
 the number of rows modified by the statement.
 Only the first [ResultSet][google.spanner.v1.ResultSet] in the response contains valid
 [ResultSetMetadata][google.spanner.v1.ResultSetMetadata].
        repeated .google.spanner.v1.ResultSet result_sets = 1;

      • addAllResultSets

        public ExecuteBatchDmlResponse.Builder addAllResultSets​(Iterable<? extends ResultSet> values)
         One [ResultSet][google.spanner.v1.ResultSet] for each statement in the request that ran successfully,
 in the same order as the statements in the request. Each [ResultSet][google.spanner.v1.ResultSet] does
 not contain any rows. The [ResultSetStats][google.spanner.v1.ResultSetStats] in each [ResultSet][google.spanner.v1.ResultSet] contain
 the number of rows modified by the statement.
 Only the first [ResultSet][google.spanner.v1.ResultSet] in the response contains valid
 [ResultSetMetadata][google.spanner.v1.ResultSetMetadata].
        repeated .google.spanner.v1.ResultSet result_sets = 1;

      • clearResultSets

        public ExecuteBatchDmlResponse.Builder clearResultSets()
         One [ResultSet][google.spanner.v1.ResultSet] for each statement in the request that ran successfully,
 in the same order as the statements in the request. Each [ResultSet][google.spanner.v1.ResultSet] does
 not contain any rows. The [ResultSetStats][google.spanner.v1.ResultSetStats] in each [ResultSet][google.spanner.v1.ResultSet] contain
 the number of rows modified by the statement.
 Only the first [ResultSet][google.spanner.v1.ResultSet] in the response contains valid
 [ResultSetMetadata][google.spanner.v1.ResultSetMetadata].
        repeated .google.spanner.v1.ResultSet result_sets = 1;

      • removeResultSets

        public ExecuteBatchDmlResponse.Builder removeResultSets​(int index)
         One [ResultSet][google.spanner.v1.ResultSet] for each statement in the request that ran successfully,
 in the same order as the statements in the request. Each [ResultSet][google.spanner.v1.ResultSet] does
 not contain any rows. The [ResultSetStats][google.spanner.v1.ResultSetStats] in each [ResultSet][google.spanner.v1.ResultSet] contain
 the number of rows modified by the statement.
 Only the first [ResultSet][google.spanner.v1.ResultSet] in the response contains valid
 [ResultSetMetadata][google.spanner.v1.ResultSetMetadata].
        repeated .google.spanner.v1.ResultSet result_sets = 1;

      • getResultSetsBuilder

        public ResultSet.Builder getResultSetsBuilder​(int index)
         One [ResultSet][google.spanner.v1.ResultSet] for each statement in the request that ran successfully,
 in the same order as the statements in the request. Each [ResultSet][google.spanner.v1.ResultSet] does
 not contain any rows. The [ResultSetStats][google.spanner.v1.ResultSetStats] in each [ResultSet][google.spanner.v1.ResultSet] contain
 the number of rows modified by the statement.
 Only the first [ResultSet][google.spanner.v1.ResultSet] in the response contains valid
 [ResultSetMetadata][google.spanner.v1.ResultSetMetadata].
        repeated .google.spanner.v1.ResultSet result_sets = 1;

      • getResultSetsOrBuilder

        public ResultSetOrBuilder getResultSetsOrBuilder​(int index)
         One [ResultSet][google.spanner.v1.ResultSet] for each statement in the request that ran successfully,
 in the same order as the statements in the request. Each [ResultSet][google.spanner.v1.ResultSet] does
 not contain any rows. The [ResultSetStats][google.spanner.v1.ResultSetStats] in each [ResultSet][google.spanner.v1.ResultSet] contain
 the number of rows modified by the statement.
 Only the first [ResultSet][google.spanner.v1.ResultSet] in the response contains valid
 [ResultSetMetadata][google.spanner.v1.ResultSetMetadata].
        repeated .google.spanner.v1.ResultSet result_sets = 1;
        Specified by:
        getResultSetsOrBuilder in interface ExecuteBatchDmlResponseOrBuilder

      • getResultSetsOrBuilderList

        public List<? extends ResultSetOrBuilder> getResultSetsOrBuilderList()
         One [ResultSet][google.spanner.v1.ResultSet] for each statement in the request that ran successfully,
 in the same order as the statements in the request. Each [ResultSet][google.spanner.v1.ResultSet] does
 not contain any rows. The [ResultSetStats][google.spanner.v1.ResultSetStats] in each [ResultSet][google.spanner.v1.ResultSet] contain
 the number of rows modified by the statement.
 Only the first [ResultSet][google.spanner.v1.ResultSet] in the response contains valid
 [ResultSetMetadata][google.spanner.v1.ResultSetMetadata].
        repeated .google.spanner.v1.ResultSet result_sets = 1;
        Specified by:
        getResultSetsOrBuilderList in interface ExecuteBatchDmlResponseOrBuilder

      • addResultSetsBuilder

        public ResultSet.Builder addResultSetsBuilder()
         One [ResultSet][google.spanner.v1.ResultSet] for each statement in the request that ran successfully,
 in the same order as the statements in the request. Each [ResultSet][google.spanner.v1.ResultSet] does
 not contain any rows. The [ResultSetStats][google.spanner.v1.ResultSetStats] in each [ResultSet][google.spanner.v1.ResultSet] contain
 the number of rows modified by the statement.
 Only the first [ResultSet][google.spanner.v1.ResultSet] in the response contains valid
 [ResultSetMetadata][google.spanner.v1.ResultSetMetadata].
        repeated .google.spanner.v1.ResultSet result_sets = 1;

      • addResultSetsBuilder

        public ResultSet.Builder addResultSetsBuilder​(int index)
         One [ResultSet][google.spanner.v1.ResultSet] for each statement in the request that ran successfully,
 in the same order as the statements in the request. Each [ResultSet][google.spanner.v1.ResultSet] does
 not contain any rows. The [ResultSetStats][google.spanner.v1.ResultSetStats] in each [ResultSet][google.spanner.v1.ResultSet] contain
 the number of rows modified by the statement.
 Only the first [ResultSet][google.spanner.v1.ResultSet] in the response contains valid
 [ResultSetMetadata][google.spanner.v1.ResultSetMetadata].
        repeated .google.spanner.v1.ResultSet result_sets = 1;

      • getResultSetsBuilderList

        public List<ResultSet.Builder> getResultSetsBuilderList()
         One [ResultSet][google.spanner.v1.ResultSet] for each statement in the request that ran successfully,
 in the same order as the statements in the request. Each [ResultSet][google.spanner.v1.ResultSet] does
 not contain any rows. The [ResultSetStats][google.spanner.v1.ResultSetStats] in each [ResultSet][google.spanner.v1.ResultSet] contain
 the number of rows modified by the statement.
 Only the first [ResultSet][google.spanner.v1.ResultSet] in the response contains valid
 [ResultSetMetadata][google.spanner.v1.ResultSetMetadata].
        repeated .google.spanner.v1.ResultSet result_sets = 1;

      • hasStatus

        public boolean hasStatus()
         If all DML statements are executed successfully, the status is `OK`.
 Otherwise, the error status of the first failed statement.
        .google.rpc.Status status = 2;
        Specified by:
        hasStatus in interface ExecuteBatchDmlResponseOrBuilder
        Returns:
        Whether the status field is set.

      • getStatus

        public com.google.rpc.Status getStatus()
         If all DML statements are executed successfully, the status is `OK`.
 Otherwise, the error status of the first failed statement.
        .google.rpc.Status status = 2;
        Specified by:
        getStatus in interface ExecuteBatchDmlResponseOrBuilder
        Returns:
        The status.

      • setStatus

        public ExecuteBatchDmlResponse.Builder setStatus​(com.google.rpc.Status value)
         If all DML statements are executed successfully, the status is `OK`.
 Otherwise, the error status of the first failed statement.
        .google.rpc.Status status = 2;

      • setStatus

        public ExecuteBatchDmlResponse.Builder setStatus​(com.google.rpc.Status.Builder builderForValue)
         If all DML statements are executed successfully, the status is `OK`.
 Otherwise, the error status of the first failed statement.
        .google.rpc.Status status = 2;

      • mergeStatus

        public ExecuteBatchDmlResponse.Builder mergeStatus​(com.google.rpc.Status value)
         If all DML statements are executed successfully, the status is `OK`.
 Otherwise, the error status of the first failed statement.
        .google.rpc.Status status = 2;

      • clearStatus

        public ExecuteBatchDmlResponse.Builder clearStatus()
         If all DML statements are executed successfully, the status is `OK`.
 Otherwise, the error status of the first failed statement.
        .google.rpc.Status status = 2;

      • getStatusBuilder

        public com.google.rpc.Status.Builder getStatusBuilder()
         If all DML statements are executed successfully, the status is `OK`.
 Otherwise, the error status of the first failed statement.
        .google.rpc.Status status = 2;

      • getStatusOrBuilder

        public com.google.rpc.StatusOrBuilder getStatusOrBuilder()
         If all DML statements are executed successfully, the status is `OK`.
 Otherwise, the error status of the first failed statement.
        .google.rpc.Status status = 2;
        Specified by:
        getStatusOrBuilder in interface ExecuteBatchDmlResponseOrBuilder

      • setUnknownFields

        public final ExecuteBatchDmlResponse.Builder setUnknownFields​(com.google.protobuf.UnknownFieldSet unknownFields)
        Specified by:
        setUnknownFields in interface com.google.protobuf.Message.Builder
        Overrides:
        setUnknownFields in class com.google.protobuf.GeneratedMessageV3.Builder<ExecuteBatchDmlResponse.Builder>

      • mergeUnknownFields

        public final ExecuteBatchDmlResponse.Builder mergeUnknownFields​(com.google.protobuf.UnknownFieldSet unknownFields)
        Specified by:
        mergeUnknownFields in interface com.google.protobuf.Message.Builder
        Overrides:
        mergeUnknownFields in class com.google.protobuf.GeneratedMessageV3.Builder<ExecuteBatchDmlResponse.Builder>