com.google.cloud.tasks.v2

Class HttpRequest.Builder

java.lang.Object

com.google.protobuf.AbstractMessageLite.Builder

com.google.protobuf.AbstractMessage.Builder<BuilderType>

com.google.protobuf.GeneratedMessageV3.Builder<HttpRequest.Builder>

com.google.cloud.tasks.v2.HttpRequest.Builder

All Implemented Interfaces:

HttpRequestOrBuilder, com.google.protobuf.Message.Builder, com.google.protobuf.MessageLite.Builder, com.google.protobuf.MessageLiteOrBuilder, com.google.protobuf.MessageOrBuilder, Cloneable

Enclosing class:

HttpRequest

public static final class HttpRequest.Builder
extends com.google.protobuf.GeneratedMessageV3.Builder<HttpRequest.Builder>
implements HttpRequestOrBuilder

 HTTP request.
 The task will be pushed to the worker as an HTTP request. If the worker
 or the redirected worker acknowledges the task by returning a successful HTTP
 response code ([`200` - `299`]), the task will be removed from the queue. If
 any other HTTP response code is returned or no response is received, the
 task will be retried according to the following:
 * User-specified throttling: [retry configuration][google.cloud.tasks.v2.Queue.retry_config],
   [rate limits][google.cloud.tasks.v2.Queue.rate_limits], and the [queue's state][google.cloud.tasks.v2.Queue.state].
 * System throttling: To prevent the worker from overloading, Cloud Tasks may
   temporarily reduce the queue's effective rate. User-specified settings
   will not be changed.
  System throttling happens because:
   * Cloud Tasks backs off on all errors. Normally the backoff specified in
     [rate limits][google.cloud.tasks.v2.Queue.rate_limits] will be used. But if the worker returns
     `429` (Too Many Requests), `503` (Service Unavailable), or the rate of
     errors is high, Cloud Tasks will use a higher backoff rate. The retry
     specified in the `Retry-After` HTTP response header is considered.
   * To prevent traffic spikes and to smooth sudden increases in traffic,
     dispatches ramp up slowly when the queue is newly created or idle and
     if large numbers of tasks suddenly become available to dispatch (due to
     spikes in create task rates, the queue being unpaused, or many tasks
     that are scheduled at the same time).
 

Protobuf type google.cloud.tasks.v2.HttpRequest

Method Summary

Modifier and Type	Method and Description
HttpRequest.Builder	addRepeatedField(com.google.protobuf.Descriptors.FieldDescriptor field, Object value)
HttpRequest	build()
HttpRequest	buildPartial()
HttpRequest.Builder	clear()
HttpRequest.Builder	clearAuthorizationHeader()
HttpRequest.Builder	clearBody() HTTP request body.
HttpRequest.Builder	clearField(com.google.protobuf.Descriptors.FieldDescriptor field)
HttpRequest.Builder	clearHeaders()
HttpRequest.Builder	clearHttpMethod() The HTTP method to use for the request.
HttpRequest.Builder	clearOauthToken() If specified, an [OAuth token](https://developers.google.com/identity/protocols/OAuth2) will be generated and attached as an `Authorization` header in the HTTP request.
HttpRequest.Builder	clearOidcToken() If specified, an [OIDC](https://developers.google.com/identity/protocols/OpenIDConnect) token will be generated and attached as an `Authorization` header in the HTTP request.
HttpRequest.Builder	clearOneof(com.google.protobuf.Descriptors.OneofDescriptor oneof)
HttpRequest.Builder	clearUrl() Required.
HttpRequest.Builder	clone()
boolean	containsHeaders(String key) HTTP request headers.
HttpRequest.AuthorizationHeaderCase	getAuthorizationHeaderCase()
com.google.protobuf.ByteString	getBody() HTTP request body.
HttpRequest	getDefaultInstanceForType()
static com.google.protobuf.Descriptors.Descriptor	getDescriptor()
com.google.protobuf.Descriptors.Descriptor	getDescriptorForType()
Map<String,String>	getHeaders() Deprecated.
int	getHeadersCount() HTTP request headers.
Map<String,String>	getHeadersMap() HTTP request headers.
String	getHeadersOrDefault(String key, String defaultValue) HTTP request headers.
String	getHeadersOrThrow(String key) HTTP request headers.
HttpMethod	getHttpMethod() The HTTP method to use for the request.
int	getHttpMethodValue() The HTTP method to use for the request.
Map<String,String>	getMutableHeaders() Deprecated.
OAuthToken	getOauthToken() If specified, an [OAuth token](https://developers.google.com/identity/protocols/OAuth2) will be generated and attached as an `Authorization` header in the HTTP request.
OAuthToken.Builder	getOauthTokenBuilder() If specified, an [OAuth token](https://developers.google.com/identity/protocols/OAuth2) will be generated and attached as an `Authorization` header in the HTTP request.
OAuthTokenOrBuilder	getOauthTokenOrBuilder() If specified, an [OAuth token](https://developers.google.com/identity/protocols/OAuth2) will be generated and attached as an `Authorization` header in the HTTP request.
OidcToken	getOidcToken() If specified, an [OIDC](https://developers.google.com/identity/protocols/OpenIDConnect) token will be generated and attached as an `Authorization` header in the HTTP request.
OidcToken.Builder	getOidcTokenBuilder() If specified, an [OIDC](https://developers.google.com/identity/protocols/OpenIDConnect) token will be generated and attached as an `Authorization` header in the HTTP request.
OidcTokenOrBuilder	getOidcTokenOrBuilder() If specified, an [OIDC](https://developers.google.com/identity/protocols/OpenIDConnect) token will be generated and attached as an `Authorization` header in the HTTP request.
String	getUrl() Required.
com.google.protobuf.ByteString	getUrlBytes() Required.
boolean	hasOauthToken() If specified, an [OAuth token](https://developers.google.com/identity/protocols/OAuth2) will be generated and attached as an `Authorization` header in the HTTP request.
boolean	hasOidcToken() If specified, an [OIDC](https://developers.google.com/identity/protocols/OpenIDConnect) token will be generated and attached as an `Authorization` header in the HTTP request.
protected com.google.protobuf.GeneratedMessageV3.FieldAccessorTable	internalGetFieldAccessorTable()
protected com.google.protobuf.MapField	internalGetMapField(int number)
protected com.google.protobuf.MapField	internalGetMutableMapField(int number)
boolean	isInitialized()
HttpRequest.Builder	mergeFrom(com.google.protobuf.CodedInputStream input, com.google.protobuf.ExtensionRegistryLite extensionRegistry)
HttpRequest.Builder	mergeFrom(HttpRequest other)
HttpRequest.Builder	mergeFrom(com.google.protobuf.Message other)
HttpRequest.Builder	mergeOauthToken(OAuthToken value) If specified, an [OAuth token](https://developers.google.com/identity/protocols/OAuth2) will be generated and attached as an `Authorization` header in the HTTP request.
HttpRequest.Builder	mergeOidcToken(OidcToken value) If specified, an [OIDC](https://developers.google.com/identity/protocols/OpenIDConnect) token will be generated and attached as an `Authorization` header in the HTTP request.
HttpRequest.Builder	mergeUnknownFields(com.google.protobuf.UnknownFieldSet unknownFields)
HttpRequest.Builder	putAllHeaders(Map<String,String> values) HTTP request headers.
HttpRequest.Builder	putHeaders(String key, String value) HTTP request headers.
HttpRequest.Builder	removeHeaders(String key) HTTP request headers.
HttpRequest.Builder	setBody(com.google.protobuf.ByteString value) HTTP request body.
HttpRequest.Builder	setField(com.google.protobuf.Descriptors.FieldDescriptor field, Object value)
HttpRequest.Builder	setHttpMethod(HttpMethod value) The HTTP method to use for the request.
HttpRequest.Builder	setHttpMethodValue(int value) The HTTP method to use for the request.
HttpRequest.Builder	setOauthToken(OAuthToken.Builder builderForValue) If specified, an [OAuth token](https://developers.google.com/identity/protocols/OAuth2) will be generated and attached as an `Authorization` header in the HTTP request.
HttpRequest.Builder	setOauthToken(OAuthToken value) If specified, an [OAuth token](https://developers.google.com/identity/protocols/OAuth2) will be generated and attached as an `Authorization` header in the HTTP request.
HttpRequest.Builder	setOidcToken(OidcToken.Builder builderForValue) If specified, an [OIDC](https://developers.google.com/identity/protocols/OpenIDConnect) token will be generated and attached as an `Authorization` header in the HTTP request.
HttpRequest.Builder	setOidcToken(OidcToken value) If specified, an [OIDC](https://developers.google.com/identity/protocols/OpenIDConnect) token will be generated and attached as an `Authorization` header in the HTTP request.
HttpRequest.Builder	setRepeatedField(com.google.protobuf.Descriptors.FieldDescriptor field, int index, Object value)
HttpRequest.Builder	setUnknownFields(com.google.protobuf.UnknownFieldSet unknownFields)
HttpRequest.Builder	setUrl(String value) Required.
HttpRequest.Builder	setUrlBytes(com.google.protobuf.ByteString value) Required.

Methods inherited from class com.google.protobuf.GeneratedMessageV3.Builder

getAllFields, getField, getFieldBuilder, getOneofFieldDescriptor, getParentForChildren, getRepeatedField, getRepeatedFieldBuilder, getRepeatedFieldCount, getUnknownFields, hasField, hasOneof, isClean, markClean, newBuilderForField, onBuilt, onChanged, setUnknownFieldsProto3

Methods inherited from class com.google.protobuf.AbstractMessage.Builder

findInitializationErrors, getInitializationErrorString, internalMergeFrom, mergeDelimitedFrom, mergeDelimitedFrom, mergeFrom, mergeFrom, mergeFrom, mergeFrom, mergeFrom, mergeFrom, mergeFrom, mergeFrom, mergeFrom, newUninitializedMessageException, toString

Methods inherited from class com.google.protobuf.AbstractMessageLite.Builder

addAll, addAll, mergeFrom, newUninitializedMessageException

Methods inherited from class java.lang.Object

equals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait

Methods inherited from interface com.google.protobuf.MessageOrBuilder

findInitializationErrors, getAllFields, getField, getInitializationErrorString, getOneofFieldDescriptor, getRepeatedField, getRepeatedFieldCount, getUnknownFields, hasField, hasOneof

Methods inherited from interface com.google.protobuf.MessageLite.Builder

mergeFrom

Method Detail

getDescriptor

public static final com.google.protobuf.Descriptors.Descriptor getDescriptor()

internalGetMapField

protected com.google.protobuf.MapField internalGetMapField(int number)

Overrides:

internalGetMapField in class com.google.protobuf.GeneratedMessageV3.Builder<HttpRequest.Builder>

internalGetMutableMapField

protected com.google.protobuf.MapField internalGetMutableMapField(int number)

Overrides:

internalGetMutableMapField in class com.google.protobuf.GeneratedMessageV3.Builder<HttpRequest.Builder>

internalGetFieldAccessorTable

protected com.google.protobuf.GeneratedMessageV3.FieldAccessorTable internalGetFieldAccessorTable()

Specified by:

internalGetFieldAccessorTable in class com.google.protobuf.GeneratedMessageV3.Builder<HttpRequest.Builder>

clear

public HttpRequest.Builder clear()

Specified by:

clear in interface com.google.protobuf.Message.Builder

Specified by:

clear in interface com.google.protobuf.MessageLite.Builder

Overrides:

clear in class com.google.protobuf.GeneratedMessageV3.Builder<HttpRequest.Builder>

getDescriptorForType

public com.google.protobuf.Descriptors.Descriptor getDescriptorForType()

Specified by:

getDescriptorForType in interface com.google.protobuf.Message.Builder

Specified by:

getDescriptorForType in interface com.google.protobuf.MessageOrBuilder

Overrides:

getDescriptorForType in class com.google.protobuf.GeneratedMessageV3.Builder<HttpRequest.Builder>

getDefaultInstanceForType

public HttpRequest getDefaultInstanceForType()

Specified by:

getDefaultInstanceForType in interface com.google.protobuf.MessageLiteOrBuilder

Specified by:

getDefaultInstanceForType in interface com.google.protobuf.MessageOrBuilder

build

public HttpRequest build()

Specified by:

build in interface com.google.protobuf.Message.Builder

Specified by:

build in interface com.google.protobuf.MessageLite.Builder

buildPartial

public HttpRequest buildPartial()

Specified by:

buildPartial in interface com.google.protobuf.Message.Builder

Specified by:

buildPartial in interface com.google.protobuf.MessageLite.Builder

clone

public HttpRequest.Builder clone()

Specified by:

clone in interface com.google.protobuf.Message.Builder

Specified by:

clone in interface com.google.protobuf.MessageLite.Builder

Overrides:

clone in class com.google.protobuf.GeneratedMessageV3.Builder<HttpRequest.Builder>

setField

public HttpRequest.Builder setField(com.google.protobuf.Descriptors.FieldDescriptor field,
                                    Object value)

Specified by:

setField in interface com.google.protobuf.Message.Builder

Overrides:

setField in class com.google.protobuf.GeneratedMessageV3.Builder<HttpRequest.Builder>

clearField

public HttpRequest.Builder clearField(com.google.protobuf.Descriptors.FieldDescriptor field)

Specified by:

clearField in interface com.google.protobuf.Message.Builder

Overrides:

clearField in class com.google.protobuf.GeneratedMessageV3.Builder<HttpRequest.Builder>

clearOneof

public HttpRequest.Builder clearOneof(com.google.protobuf.Descriptors.OneofDescriptor oneof)

Specified by:

clearOneof in interface com.google.protobuf.Message.Builder

Overrides:

clearOneof in class com.google.protobuf.GeneratedMessageV3.Builder<HttpRequest.Builder>

setRepeatedField

public HttpRequest.Builder setRepeatedField(com.google.protobuf.Descriptors.FieldDescriptor field,
                                            int index,
                                            Object value)

Specified by:

setRepeatedField in interface com.google.protobuf.Message.Builder

Overrides:

setRepeatedField in class com.google.protobuf.GeneratedMessageV3.Builder<HttpRequest.Builder>

addRepeatedField

public HttpRequest.Builder addRepeatedField(com.google.protobuf.Descriptors.FieldDescriptor field,
                                            Object value)

Specified by:

addRepeatedField in interface com.google.protobuf.Message.Builder

Overrides:

addRepeatedField in class com.google.protobuf.GeneratedMessageV3.Builder<HttpRequest.Builder>

mergeFrom

public HttpRequest.Builder mergeFrom(com.google.protobuf.Message other)

Specified by:

mergeFrom in interface com.google.protobuf.Message.Builder

Overrides:

mergeFrom in class com.google.protobuf.AbstractMessage.Builder<HttpRequest.Builder>

mergeFrom

public HttpRequest.Builder mergeFrom(HttpRequest other)

isInitialized

public final boolean isInitialized()

Specified by:

isInitialized in interface com.google.protobuf.MessageLiteOrBuilder

Overrides:

isInitialized in class com.google.protobuf.GeneratedMessageV3.Builder<HttpRequest.Builder>

mergeFrom

public HttpRequest.Builder mergeFrom(com.google.protobuf.CodedInputStream input,
                                     com.google.protobuf.ExtensionRegistryLite extensionRegistry)
                              throws IOException

Specified by:

mergeFrom in interface com.google.protobuf.Message.Builder

Specified by:

mergeFrom in interface com.google.protobuf.MessageLite.Builder

Overrides:

mergeFrom in class com.google.protobuf.AbstractMessage.Builder<HttpRequest.Builder>

Throws:

IOException

getAuthorizationHeaderCase

public HttpRequest.AuthorizationHeaderCase getAuthorizationHeaderCase()

Specified by:

getAuthorizationHeaderCase in interface HttpRequestOrBuilder

clearAuthorizationHeader

public HttpRequest.Builder clearAuthorizationHeader()

getUrl

public String getUrl()

 Required. The full url path that the request will be sent to.
 This string must begin with either "http://" or "https://". Some examples
 are: `http://acme.com` and `https://acme.com/sales:8080`. Cloud Tasks will
 encode some characters for safety and compatibility. The maximum allowed
 URL length is 2083 characters after encoding.
 The `Location` header response from a redirect response [`300` - `399`]
 may be followed. The redirect is not counted as a separate attempt.
 

string url = 1 [(.google.api.field_behavior) = REQUIRED];

Specified by:

getUrl in interface HttpRequestOrBuilder

Returns:

The url.

getUrlBytes

public com.google.protobuf.ByteString getUrlBytes()

 Required. The full url path that the request will be sent to.
 This string must begin with either "http://" or "https://". Some examples
 are: `http://acme.com` and `https://acme.com/sales:8080`. Cloud Tasks will
 encode some characters for safety and compatibility. The maximum allowed
 URL length is 2083 characters after encoding.
 The `Location` header response from a redirect response [`300` - `399`]
 may be followed. The redirect is not counted as a separate attempt.
 

string url = 1 [(.google.api.field_behavior) = REQUIRED];

Specified by:

getUrlBytes in interface HttpRequestOrBuilder

Returns:

The bytes for url.

setUrl

public HttpRequest.Builder setUrl(String value)

 Required. The full url path that the request will be sent to.
 This string must begin with either "http://" or "https://". Some examples
 are: `http://acme.com` and `https://acme.com/sales:8080`. Cloud Tasks will
 encode some characters for safety and compatibility. The maximum allowed
 URL length is 2083 characters after encoding.
 The `Location` header response from a redirect response [`300` - `399`]
 may be followed. The redirect is not counted as a separate attempt.
 

string url = 1 [(.google.api.field_behavior) = REQUIRED];

Parameters:

value - The url to set.

Returns:

This builder for chaining.

clearUrl

public HttpRequest.Builder clearUrl()

 Required. The full url path that the request will be sent to.
 This string must begin with either "http://" or "https://". Some examples
 are: `http://acme.com` and `https://acme.com/sales:8080`. Cloud Tasks will
 encode some characters for safety and compatibility. The maximum allowed
 URL length is 2083 characters after encoding.
 The `Location` header response from a redirect response [`300` - `399`]
 may be followed. The redirect is not counted as a separate attempt.
 

string url = 1 [(.google.api.field_behavior) = REQUIRED];

Returns:

This builder for chaining.

setUrlBytes

public HttpRequest.Builder setUrlBytes(com.google.protobuf.ByteString value)

 Required. The full url path that the request will be sent to.
 This string must begin with either "http://" or "https://". Some examples
 are: `http://acme.com` and `https://acme.com/sales:8080`. Cloud Tasks will
 encode some characters for safety and compatibility. The maximum allowed
 URL length is 2083 characters after encoding.
 The `Location` header response from a redirect response [`300` - `399`]
 may be followed. The redirect is not counted as a separate attempt.
 

string url = 1 [(.google.api.field_behavior) = REQUIRED];

Parameters:

value - The bytes for url to set.

Returns:

This builder for chaining.

getHttpMethodValue

public int getHttpMethodValue()

 The HTTP method to use for the request. The default is POST.
 

.google.cloud.tasks.v2.HttpMethod http_method = 2;

Specified by:

getHttpMethodValue in interface HttpRequestOrBuilder

Returns:

The enum numeric value on the wire for httpMethod.

setHttpMethodValue

public HttpRequest.Builder setHttpMethodValue(int value)

 The HTTP method to use for the request. The default is POST.
 

.google.cloud.tasks.v2.HttpMethod http_method = 2;

Parameters:

value - The enum numeric value on the wire for httpMethod to set.

Returns:

This builder for chaining.

getHttpMethod

public HttpMethod getHttpMethod()

 The HTTP method to use for the request. The default is POST.
 

.google.cloud.tasks.v2.HttpMethod http_method = 2;

Specified by:

getHttpMethod in interface HttpRequestOrBuilder

Returns:

The httpMethod.

setHttpMethod

public HttpRequest.Builder setHttpMethod(HttpMethod value)

 The HTTP method to use for the request. The default is POST.
 

.google.cloud.tasks.v2.HttpMethod http_method = 2;

Parameters:

value - The httpMethod to set.

Returns:

This builder for chaining.

clearHttpMethod

public HttpRequest.Builder clearHttpMethod()

 The HTTP method to use for the request. The default is POST.
 

.google.cloud.tasks.v2.HttpMethod http_method = 2;

Returns:

This builder for chaining.

getHeadersCount

public int getHeadersCount()

Description copied from interface: HttpRequestOrBuilder

 HTTP request headers.
 This map contains the header field names and values.
 Headers can be set when the
 [task is created][google.cloud.tasks.v2beta3.CloudTasks.CreateTask].
 These headers represent a subset of the headers that will accompany the
 task's HTTP request. Some HTTP request headers will be ignored or replaced.
 A partial list of headers that will be ignored or replaced is:
 * Host: This will be computed by Cloud Tasks and derived from
   [HttpRequest.url][google.cloud.tasks.v2.HttpRequest.url].
 * Content-Length: This will be computed by Cloud Tasks.
 * User-Agent: This will be set to `"Google-Cloud-Tasks"`.
 * `X-Google-*`: Google use only.
 * `X-AppEngine-*`: Google use only.
 `Content-Type` won't be set by Cloud Tasks. You can explicitly set
 `Content-Type` to a media type when the
  [task is created][google.cloud.tasks.v2beta3.CloudTasks.CreateTask].
  For example, `Content-Type` can be set to `"application/octet-stream"` or
  `"application/json"`.
 Headers which can have multiple values (according to RFC2616) can be
 specified using comma-separated values.
 The size of the headers must be less than 80KB.
 

map<string, string> headers = 3;

Specified by:

getHeadersCount in interface HttpRequestOrBuilder

containsHeaders

public boolean containsHeaders(String key)

 HTTP request headers.
 This map contains the header field names and values.
 Headers can be set when the
 [task is created][google.cloud.tasks.v2beta3.CloudTasks.CreateTask].
 These headers represent a subset of the headers that will accompany the
 task's HTTP request. Some HTTP request headers will be ignored or replaced.
 A partial list of headers that will be ignored or replaced is:
 * Host: This will be computed by Cloud Tasks and derived from
   [HttpRequest.url][google.cloud.tasks.v2.HttpRequest.url].
 * Content-Length: This will be computed by Cloud Tasks.
 * User-Agent: This will be set to `"Google-Cloud-Tasks"`.
 * `X-Google-*`: Google use only.
 * `X-AppEngine-*`: Google use only.
 `Content-Type` won't be set by Cloud Tasks. You can explicitly set
 `Content-Type` to a media type when the
  [task is created][google.cloud.tasks.v2beta3.CloudTasks.CreateTask].
  For example, `Content-Type` can be set to `"application/octet-stream"` or
  `"application/json"`.
 Headers which can have multiple values (according to RFC2616) can be
 specified using comma-separated values.
 The size of the headers must be less than 80KB.
 

map<string, string> headers = 3;

Specified by:

containsHeaders in interface HttpRequestOrBuilder

getHeaders

@Deprecated
public Map<String,String> getHeaders()

Deprecated.

Use getHeadersMap() instead.

Specified by:

getHeaders in interface HttpRequestOrBuilder

getHeadersMap

public Map<String,String> getHeadersMap()

 HTTP request headers.
 This map contains the header field names and values.
 Headers can be set when the
 [task is created][google.cloud.tasks.v2beta3.CloudTasks.CreateTask].
 These headers represent a subset of the headers that will accompany the
 task's HTTP request. Some HTTP request headers will be ignored or replaced.
 A partial list of headers that will be ignored or replaced is:
 * Host: This will be computed by Cloud Tasks and derived from
   [HttpRequest.url][google.cloud.tasks.v2.HttpRequest.url].
 * Content-Length: This will be computed by Cloud Tasks.
 * User-Agent: This will be set to `"Google-Cloud-Tasks"`.
 * `X-Google-*`: Google use only.
 * `X-AppEngine-*`: Google use only.
 `Content-Type` won't be set by Cloud Tasks. You can explicitly set
 `Content-Type` to a media type when the
  [task is created][google.cloud.tasks.v2beta3.CloudTasks.CreateTask].
  For example, `Content-Type` can be set to `"application/octet-stream"` or
  `"application/json"`.
 Headers which can have multiple values (according to RFC2616) can be
 specified using comma-separated values.
 The size of the headers must be less than 80KB.
 

map<string, string> headers = 3;

Specified by:

getHeadersMap in interface HttpRequestOrBuilder

getHeadersOrDefault

public String getHeadersOrDefault(String key,
                                  String defaultValue)

 HTTP request headers.
 This map contains the header field names and values.
 Headers can be set when the
 [task is created][google.cloud.tasks.v2beta3.CloudTasks.CreateTask].
 These headers represent a subset of the headers that will accompany the
 task's HTTP request. Some HTTP request headers will be ignored or replaced.
 A partial list of headers that will be ignored or replaced is:
 * Host: This will be computed by Cloud Tasks and derived from
   [HttpRequest.url][google.cloud.tasks.v2.HttpRequest.url].
 * Content-Length: This will be computed by Cloud Tasks.
 * User-Agent: This will be set to `"Google-Cloud-Tasks"`.
 * `X-Google-*`: Google use only.
 * `X-AppEngine-*`: Google use only.
 `Content-Type` won't be set by Cloud Tasks. You can explicitly set
 `Content-Type` to a media type when the
  [task is created][google.cloud.tasks.v2beta3.CloudTasks.CreateTask].
  For example, `Content-Type` can be set to `"application/octet-stream"` or
  `"application/json"`.
 Headers which can have multiple values (according to RFC2616) can be
 specified using comma-separated values.
 The size of the headers must be less than 80KB.
 

map<string, string> headers = 3;

Specified by:

getHeadersOrDefault in interface HttpRequestOrBuilder

getHeadersOrThrow

public String getHeadersOrThrow(String key)

 HTTP request headers.
 This map contains the header field names and values.
 Headers can be set when the
 [task is created][google.cloud.tasks.v2beta3.CloudTasks.CreateTask].
 These headers represent a subset of the headers that will accompany the
 task's HTTP request. Some HTTP request headers will be ignored or replaced.
 A partial list of headers that will be ignored or replaced is:
 * Host: This will be computed by Cloud Tasks and derived from
   [HttpRequest.url][google.cloud.tasks.v2.HttpRequest.url].
 * Content-Length: This will be computed by Cloud Tasks.
 * User-Agent: This will be set to `"Google-Cloud-Tasks"`.
 * `X-Google-*`: Google use only.
 * `X-AppEngine-*`: Google use only.
 `Content-Type` won't be set by Cloud Tasks. You can explicitly set
 `Content-Type` to a media type when the
  [task is created][google.cloud.tasks.v2beta3.CloudTasks.CreateTask].
  For example, `Content-Type` can be set to `"application/octet-stream"` or
  `"application/json"`.
 Headers which can have multiple values (according to RFC2616) can be
 specified using comma-separated values.
 The size of the headers must be less than 80KB.
 

map<string, string> headers = 3;

Specified by:

getHeadersOrThrow in interface HttpRequestOrBuilder

clearHeaders

public HttpRequest.Builder clearHeaders()

removeHeaders

public HttpRequest.Builder removeHeaders(String key)

 HTTP request headers.
 This map contains the header field names and values.
 Headers can be set when the
 [task is created][google.cloud.tasks.v2beta3.CloudTasks.CreateTask].
 These headers represent a subset of the headers that will accompany the
 task's HTTP request. Some HTTP request headers will be ignored or replaced.
 A partial list of headers that will be ignored or replaced is:
 * Host: This will be computed by Cloud Tasks and derived from
   [HttpRequest.url][google.cloud.tasks.v2.HttpRequest.url].
 * Content-Length: This will be computed by Cloud Tasks.
 * User-Agent: This will be set to `"Google-Cloud-Tasks"`.
 * `X-Google-*`: Google use only.
 * `X-AppEngine-*`: Google use only.
 `Content-Type` won't be set by Cloud Tasks. You can explicitly set
 `Content-Type` to a media type when the
  [task is created][google.cloud.tasks.v2beta3.CloudTasks.CreateTask].
  For example, `Content-Type` can be set to `"application/octet-stream"` or
  `"application/json"`.
 Headers which can have multiple values (according to RFC2616) can be
 specified using comma-separated values.
 The size of the headers must be less than 80KB.
 

map<string, string> headers = 3;

getMutableHeaders

@Deprecated
public Map<String,String> getMutableHeaders()

Deprecated.

Use alternate mutation accessors instead.

putHeaders

public HttpRequest.Builder putHeaders(String key,
                                      String value)

 HTTP request headers.
 This map contains the header field names and values.
 Headers can be set when the
 [task is created][google.cloud.tasks.v2beta3.CloudTasks.CreateTask].
 These headers represent a subset of the headers that will accompany the
 task's HTTP request. Some HTTP request headers will be ignored or replaced.
 A partial list of headers that will be ignored or replaced is:
 * Host: This will be computed by Cloud Tasks and derived from
   [HttpRequest.url][google.cloud.tasks.v2.HttpRequest.url].
 * Content-Length: This will be computed by Cloud Tasks.
 * User-Agent: This will be set to `"Google-Cloud-Tasks"`.
 * `X-Google-*`: Google use only.
 * `X-AppEngine-*`: Google use only.
 `Content-Type` won't be set by Cloud Tasks. You can explicitly set
 `Content-Type` to a media type when the
  [task is created][google.cloud.tasks.v2beta3.CloudTasks.CreateTask].
  For example, `Content-Type` can be set to `"application/octet-stream"` or
  `"application/json"`.
 Headers which can have multiple values (according to RFC2616) can be
 specified using comma-separated values.
 The size of the headers must be less than 80KB.
 

map<string, string> headers = 3;

putAllHeaders

public HttpRequest.Builder putAllHeaders(Map<String,String> values)

 HTTP request headers.
 This map contains the header field names and values.
 Headers can be set when the
 [task is created][google.cloud.tasks.v2beta3.CloudTasks.CreateTask].
 These headers represent a subset of the headers that will accompany the
 task's HTTP request. Some HTTP request headers will be ignored or replaced.
 A partial list of headers that will be ignored or replaced is:
 * Host: This will be computed by Cloud Tasks and derived from
   [HttpRequest.url][google.cloud.tasks.v2.HttpRequest.url].
 * Content-Length: This will be computed by Cloud Tasks.
 * User-Agent: This will be set to `"Google-Cloud-Tasks"`.
 * `X-Google-*`: Google use only.
 * `X-AppEngine-*`: Google use only.
 `Content-Type` won't be set by Cloud Tasks. You can explicitly set
 `Content-Type` to a media type when the
  [task is created][google.cloud.tasks.v2beta3.CloudTasks.CreateTask].
  For example, `Content-Type` can be set to `"application/octet-stream"` or
  `"application/json"`.
 Headers which can have multiple values (according to RFC2616) can be
 specified using comma-separated values.
 The size of the headers must be less than 80KB.
 

map<string, string> headers = 3;

getBody

public com.google.protobuf.ByteString getBody()

 HTTP request body.
 A request body is allowed only if the
 [HTTP method][google.cloud.tasks.v2.HttpRequest.http_method] is POST, PUT, or PATCH. It is an
 error to set body on a task with an incompatible [HttpMethod][google.cloud.tasks.v2.HttpMethod].
 

bytes body = 4;

Specified by:

getBody in interface HttpRequestOrBuilder

Returns:

The body.

setBody

public HttpRequest.Builder setBody(com.google.protobuf.ByteString value)

 HTTP request body.
 A request body is allowed only if the
 [HTTP method][google.cloud.tasks.v2.HttpRequest.http_method] is POST, PUT, or PATCH. It is an
 error to set body on a task with an incompatible [HttpMethod][google.cloud.tasks.v2.HttpMethod].
 

bytes body = 4;

Parameters:

value - The body to set.

Returns:

This builder for chaining.

clearBody

public HttpRequest.Builder clearBody()

 HTTP request body.
 A request body is allowed only if the
 [HTTP method][google.cloud.tasks.v2.HttpRequest.http_method] is POST, PUT, or PATCH. It is an
 error to set body on a task with an incompatible [HttpMethod][google.cloud.tasks.v2.HttpMethod].
 

bytes body = 4;

Returns:

This builder for chaining.

hasOauthToken

public boolean hasOauthToken()

 If specified, an
 [OAuth token](https://developers.google.com/identity/protocols/OAuth2)
 will be generated and attached as an `Authorization` header in the HTTP
 request.
 This type of authorization should generally only be used when calling
 Google APIs hosted on *.googleapis.com.
 

.google.cloud.tasks.v2.OAuthToken oauth_token = 5;

Specified by:

hasOauthToken in interface HttpRequestOrBuilder

Returns:

Whether the oauthToken field is set.

getOauthToken

public OAuthToken getOauthToken()

 If specified, an
 [OAuth token](https://developers.google.com/identity/protocols/OAuth2)
 will be generated and attached as an `Authorization` header in the HTTP
 request.
 This type of authorization should generally only be used when calling
 Google APIs hosted on *.googleapis.com.
 

.google.cloud.tasks.v2.OAuthToken oauth_token = 5;

Specified by:

getOauthToken in interface HttpRequestOrBuilder

Returns:

The oauthToken.

setOauthToken

public HttpRequest.Builder setOauthToken(OAuthToken value)

 If specified, an
 [OAuth token](https://developers.google.com/identity/protocols/OAuth2)
 will be generated and attached as an `Authorization` header in the HTTP
 request.
 This type of authorization should generally only be used when calling
 Google APIs hosted on *.googleapis.com.
 

.google.cloud.tasks.v2.OAuthToken oauth_token = 5;

setOauthToken

public HttpRequest.Builder setOauthToken(OAuthToken.Builder builderForValue)

 If specified, an
 [OAuth token](https://developers.google.com/identity/protocols/OAuth2)
 will be generated and attached as an `Authorization` header in the HTTP
 request.
 This type of authorization should generally only be used when calling
 Google APIs hosted on *.googleapis.com.
 

.google.cloud.tasks.v2.OAuthToken oauth_token = 5;

mergeOauthToken

public HttpRequest.Builder mergeOauthToken(OAuthToken value)

 If specified, an
 [OAuth token](https://developers.google.com/identity/protocols/OAuth2)
 will be generated and attached as an `Authorization` header in the HTTP
 request.
 This type of authorization should generally only be used when calling
 Google APIs hosted on *.googleapis.com.
 

.google.cloud.tasks.v2.OAuthToken oauth_token = 5;

clearOauthToken

public HttpRequest.Builder clearOauthToken()

 If specified, an
 [OAuth token](https://developers.google.com/identity/protocols/OAuth2)
 will be generated and attached as an `Authorization` header in the HTTP
 request.
 This type of authorization should generally only be used when calling
 Google APIs hosted on *.googleapis.com.
 

.google.cloud.tasks.v2.OAuthToken oauth_token = 5;

getOauthTokenBuilder

public OAuthToken.Builder getOauthTokenBuilder()

 If specified, an
 [OAuth token](https://developers.google.com/identity/protocols/OAuth2)
 will be generated and attached as an `Authorization` header in the HTTP
 request.
 This type of authorization should generally only be used when calling
 Google APIs hosted on *.googleapis.com.
 

.google.cloud.tasks.v2.OAuthToken oauth_token = 5;

getOauthTokenOrBuilder

public OAuthTokenOrBuilder getOauthTokenOrBuilder()

 If specified, an
 [OAuth token](https://developers.google.com/identity/protocols/OAuth2)
 will be generated and attached as an `Authorization` header in the HTTP
 request.
 This type of authorization should generally only be used when calling
 Google APIs hosted on *.googleapis.com.
 

.google.cloud.tasks.v2.OAuthToken oauth_token = 5;

Specified by:

getOauthTokenOrBuilder in interface HttpRequestOrBuilder

hasOidcToken

public boolean hasOidcToken()

 If specified, an
 [OIDC](https://developers.google.com/identity/protocols/OpenIDConnect)
 token will be generated and attached as an `Authorization` header in the
 HTTP request.
 This type of authorization can be used for many scenarios, including
 calling Cloud Run, or endpoints where you intend to validate the token
 yourself.
 

.google.cloud.tasks.v2.OidcToken oidc_token = 6;

Specified by:

hasOidcToken in interface HttpRequestOrBuilder

Returns:

Whether the oidcToken field is set.

getOidcToken

public OidcToken getOidcToken()

 If specified, an
 [OIDC](https://developers.google.com/identity/protocols/OpenIDConnect)
 token will be generated and attached as an `Authorization` header in the
 HTTP request.
 This type of authorization can be used for many scenarios, including
 calling Cloud Run, or endpoints where you intend to validate the token
 yourself.
 

.google.cloud.tasks.v2.OidcToken oidc_token = 6;

Specified by:

getOidcToken in interface HttpRequestOrBuilder

Returns:

The oidcToken.

setOidcToken

public HttpRequest.Builder setOidcToken(OidcToken value)

 If specified, an
 [OIDC](https://developers.google.com/identity/protocols/OpenIDConnect)
 token will be generated and attached as an `Authorization` header in the
 HTTP request.
 This type of authorization can be used for many scenarios, including
 calling Cloud Run, or endpoints where you intend to validate the token
 yourself.
 

.google.cloud.tasks.v2.OidcToken oidc_token = 6;

setOidcToken

public HttpRequest.Builder setOidcToken(OidcToken.Builder builderForValue)

 If specified, an
 [OIDC](https://developers.google.com/identity/protocols/OpenIDConnect)
 token will be generated and attached as an `Authorization` header in the
 HTTP request.
 This type of authorization can be used for many scenarios, including
 calling Cloud Run, or endpoints where you intend to validate the token
 yourself.
 

.google.cloud.tasks.v2.OidcToken oidc_token = 6;

mergeOidcToken

public HttpRequest.Builder mergeOidcToken(OidcToken value)

 If specified, an
 [OIDC](https://developers.google.com/identity/protocols/OpenIDConnect)
 token will be generated and attached as an `Authorization` header in the
 HTTP request.
 This type of authorization can be used for many scenarios, including
 calling Cloud Run, or endpoints where you intend to validate the token
 yourself.
 

.google.cloud.tasks.v2.OidcToken oidc_token = 6;

clearOidcToken

public HttpRequest.Builder clearOidcToken()

 If specified, an
 [OIDC](https://developers.google.com/identity/protocols/OpenIDConnect)
 token will be generated and attached as an `Authorization` header in the
 HTTP request.
 This type of authorization can be used for many scenarios, including
 calling Cloud Run, or endpoints where you intend to validate the token
 yourself.
 

.google.cloud.tasks.v2.OidcToken oidc_token = 6;

getOidcTokenBuilder

public OidcToken.Builder getOidcTokenBuilder()

 If specified, an
 [OIDC](https://developers.google.com/identity/protocols/OpenIDConnect)
 token will be generated and attached as an `Authorization` header in the
 HTTP request.
 This type of authorization can be used for many scenarios, including
 calling Cloud Run, or endpoints where you intend to validate the token
 yourself.
 

.google.cloud.tasks.v2.OidcToken oidc_token = 6;

getOidcTokenOrBuilder

public OidcTokenOrBuilder getOidcTokenOrBuilder()

 If specified, an
 [OIDC](https://developers.google.com/identity/protocols/OpenIDConnect)
 token will be generated and attached as an `Authorization` header in the
 HTTP request.
 This type of authorization can be used for many scenarios, including
 calling Cloud Run, or endpoints where you intend to validate the token
 yourself.
 

.google.cloud.tasks.v2.OidcToken oidc_token = 6;

Specified by:

getOidcTokenOrBuilder in interface HttpRequestOrBuilder

setUnknownFields

public final HttpRequest.Builder setUnknownFields(com.google.protobuf.UnknownFieldSet unknownFields)

Specified by:

setUnknownFields in interface com.google.protobuf.Message.Builder

Overrides:

setUnknownFields in class com.google.protobuf.GeneratedMessageV3.Builder<HttpRequest.Builder>

mergeUnknownFields

public final HttpRequest.Builder mergeUnknownFields(com.google.protobuf.UnknownFieldSet unknownFields)

Specified by:

mergeUnknownFields in interface com.google.protobuf.Message.Builder

Overrides:

mergeUnknownFields in class com.google.protobuf.GeneratedMessageV3.Builder<HttpRequest.Builder>