javax.jms

Interface Connection

All Known Subinterfaces:

QueueConnection, TopicConnection, XAConnection, XAQueueConnection, XATopicConnection

public interface Connection

A Connection object is a client's active connection to its JMS provider. It typically allocates provider resources outside the Java virtual machine (JVM).

Connections support concurrent use.

A connection serves several purposes:

• It encapsulates an open connection with a JMS provider. It typically represents an open TCP/IP socket between a client and the service provider software.
• Its creation is where client authentication takes place.
• It can specify a unique client identifier.
• It provides a ConnectionMetaData object.
• It supports an optional ExceptionListener object.

Because the creation of a connection involves setting up authentication and communication, a connection is a relatively heavyweight object. Most clients will do all their messaging with a single connection. Other more advanced applications may use several connections. The JMS API does not architect a reason for using multiple connections; however, there may be operational reasons for doing so.

A JMS client typically creates a connection, one or more sessions, and a number of message producers and consumers. When a connection is created, it is in stopped mode. That means that no messages are being delivered.

It is typical to leave the connection in stopped mode until setup is complete (that is, until all message consumers have been created). At that point, the client calls the connection's start method, and messages begin arriving at the connection's consumers. This setup convention minimizes any client confusion that may result from asynchronous message delivery while the client is still in the process of setting itself up.

A connection can be started immediately, and the setup can be done afterwards. Clients that do this must be prepared to handle asynchronous message delivery while they are still in the process of setting up.

A message producer can send messages while a connection is stopped.

Version:

1.1 - February 1, 2002

See Also:

ConnectionFactory, QueueConnection, TopicConnection

Method Summary

Methods

Modifier and Type	Method and Description
void	close() Closes the connection.
ConnectionConsumer	createConnectionConsumer(Destination destination, String messageSelector, ServerSessionPool sessionPool, int maxMessages) Creates a connection consumer for this connection (optional operation).
ConnectionConsumer	createDurableConnectionConsumer(Topic topic, String subscriptionName, String messageSelector, ServerSessionPool sessionPool, int maxMessages) Create a durable connection consumer for this connection (optional operation).
Session	createSession(boolean transacted, int acknowledgeMode) Creates a Session object.
String	getClientID() Gets the client identifier for this connection.
ExceptionListener	getExceptionListener() Gets the ExceptionListener object for this connection.
ConnectionMetaData	getMetaData() Gets the metadata for this connection.
void	setClientID(String clientID) Sets the client identifier for this connection.
void	setExceptionListener(ExceptionListener listener) Sets an exception listener for this connection.
void	start() Starts (or restarts) a connection's delivery of incoming messages.
void	stop() Temporarily stops a connection's delivery of incoming messages.

Method Detail

createSession

Session createSession(boolean transacted,
                    int acknowledgeMode)
                      throws JMSException

Creates a Session object.

Parameters:

transacted - indicates whether the session is transacted

acknowledgeMode - indicates whether the consumer or the client will acknowledge any messages it receives; ignored if the session is transacted. Legal values are Session.AUTO_ACKNOWLEDGE, Session.CLIENT_ACKNOWLEDGE, Session.DUPS_OK_ACKNOWLEDGE, and

SupportedProperty.SOL_CLIENT_ACKNOWLEDGE. (Supported since 5.1 SolOS-TR)

Returns:

a newly created session

Throws:

JMSException - if the Connection object fails to create a session due to some internal error or lack of support for the specific transaction and acknowledgement mode.

Since:

1.1

See Also:

Session.AUTO_ACKNOWLEDGE, Session.CLIENT_ACKNOWLEDGE, Session.DUPS_OK_ACKNOWLEDGE, SupportedProperty.SOL_CLIENT_ACKNOWLEDGE

getClientID

String getClientID()
                   throws JMSException

Gets the client identifier for this connection.

In releases prior to 5.0 SolOS-TR, the client identifier is automatically generated by the provider. Calls to setClientID will have no effect on ClientID.

Returns:

the unique client identifier

Throws:

JMSException - if the JMS provider fails to return the client ID for this connection due to some internal error.

Since:

5.0 SolOS-TR

setClientID

void setClientID(String clientID)
                 throws JMSException

Sets the client identifier for this connection.

Sets the Client ID used to register with the appliance running in SolOS-TR. "Client ID" is known as "Client Name" on the appliance. If specified, it must be a valid Topic name, and a maximum of 160 bytes in length when encoded as UTF-8. If not specified, an auto-generated client ID is used. In releases prior to 5.0 SolOS-TR, calls to this method will have no effect on Client ID. No exceptions can be thrown from this method.

Parameters:

clientID - the unique client identifier

Throws:

JMSException - on error

Since:

5.0 SolOS-TR

getMetaData

ConnectionMetaData getMetaData()
                               throws JMSException

Gets the metadata for this connection.

Returns:

the connection metadata

Throws:

JMSException - if the JMS provider fails to get the connection metadata for this connection.

See Also:

ConnectionMetaData

getExceptionListener

ExceptionListener getExceptionListener()
                                       throws JMSException

Gets the ExceptionListener object for this connection. Not every Connection has an ExceptionListener associated with it.

Returns:

the ExceptionListener for this connection, or null. if no ExceptionListener is associated with this connection.

Throws:

JMSException - if the JMS provider fails to get the ExceptionListener for this connection.

See Also:

setExceptionListener(javax.jms.ExceptionListener)

setExceptionListener

void setExceptionListener(ExceptionListener listener)
                          throws JMSException

Sets an exception listener for this connection.

If a JMS provider detects a serious problem with a connection, it informs the connection's ExceptionListener, if one has been registered. It does this by calling the listener's onException method, passing it a JMSException object describing the problem.

An exception listener allows a client to be notified of a problem asynchronously. Some connections only consume messages, so they would have no other way to learn their connection has failed.

A connection serializes execution of its ExceptionListener.

A JMS provider should attempt to resolve connection problems itself before it notifies the client of them.

Parameters:

listener - the exception listener

Throws:

JMSException - if the JMS provider fails to set the exception listener for this connection.

start

void start()
           throws JMSException

Starts (or restarts) a connection's delivery of incoming messages. A call to start on a connection that has already been started is ignored.

start and stop has no effect on reliable messaging.

Throws:

JMSException - if the JMS provider fails to start message delivery due to some internal error.

See Also:

stop()

stop

void stop()
          throws JMSException

Temporarily stops a connection's delivery of incoming messages. Delivery can be restarted using the connection's start method. When the connection is stopped, delivery to all the connection's message consumers is inhibited: synchronous receives block, and messages are not delivered to message listeners.

This call blocks until receives and/or message listeners in progress have completed.

Stopping a connection has no effect on its ability to send messages. A call to stop on a connection that has already been stopped is ignored.

A call to stop must not return until delivery of messages has paused. This means that a client can rely on the fact that none of its message listeners will be called and that all threads of control waiting for receive calls to return will not return with a message until the connection is restarted. The receive timers for a stopped connection continue to advance, so receives may time out while the connection is stopped.

If message listeners are running when stop is invoked, the stop call must wait until all of them have returned before it may return. While these message listeners are completing, they must have the full services of the connection available to them.

start and stop has no effect on reliable messaging.

Throws:

JMSException - if the JMS provider fails to stop message delivery due to some internal error.

See Also:

start()

close

void close()
           throws JMSException

Closes the connection.

Since a provider typically allocates significant resources outside the JVM on behalf of a connection, clients should close these resources when they are not needed. Relying on garbage collection to eventually reclaim these resources may not be timely enough.

There is no need to close the sessions, producers, and consumers of a closed connection.

Closing a connection causes all temporary destinations to be deleted.

When this method is invoked, it should not return until message processing has been shut down in an orderly fashion. This means that all message listeners that may have been running have returned, and that all pending receives have returned. A close terminates all pending message receives on the connection's sessions' consumers. The receives may return with a message or with null, depending on whether there was a message available at the time of the close. If one or more of the connection's sessions' message listeners is processing a message at the time when connection close is invoked, all the facilities of the connection and its sessions must remain available to those listeners until they return control to the JMS provider.

Closing a connection causes any of its sessions' transactions in progress to be rolled back. In the case where a session's work is coordinated by an external transaction manager, a session's commit and rollback methods are not used and the result of a closed session's work is determined later by the transaction manager. Closing a connection does NOT force an acknowledgment of client-acknowledged sessions.

Invoking the acknowledge method of a received message from a closed connection's session must throw an IllegalStateException. Closing a closed connection must NOT throw an exception.

Throws:

JMSException - if the JMS provider fails to close the connection due to some internal error. For example, a failure to release resources or to close a socket connection can cause this exception to be thrown.

createConnectionConsumer

ConnectionConsumer createConnectionConsumer(Destination destination,
                                          String messageSelector,
                                          ServerSessionPool sessionPool,
                                          int maxMessages)
                                            throws JMSException

Creates a connection consumer for this connection (optional operation). This is an expert facility not used by regular JMS clients.

Parameters:

destination - the destination to access

messageSelector - only messages with properties matching the message selector expression are delivered. A value of null or an empty string indicates that there is no message selector for the message consumer.

sessionPool - the server session pool to associate with this connection consumer

maxMessages - the maximum number of messages that can be assigned to a server session at one time

Returns:

the connection consumer

Throws:

JMSException - if the Connection object fails to create a connection consumer due to some internal error or invalid arguments for sessionPool and messageSelector.

InvalidDestinationException - if an invalid destination is specified.

InvalidSelectorException - if the message selector is invalid.

Since:

1.1

See Also:

ConnectionConsumer

createDurableConnectionConsumer

ConnectionConsumer createDurableConnectionConsumer(Topic topic,
                                                 String subscriptionName,
                                                 String messageSelector,
                                                 ServerSessionPool sessionPool,
                                                 int maxMessages)
                                                   throws JMSException

Create a durable connection consumer for this connection (optional operation). This is an expert facility not used by regular JMS clients.

Parameters:

topic - topic to access

subscriptionName - durable subscription name

messageSelector - only messages with properties matching the message selector expression are delivered. A value of null or an empty string indicates that there is no message selector for the message consumer.

sessionPool - the server session pool to associate with this durable connection consumer

maxMessages - the maximum number of messages that can be assigned to a server session at one time

Returns:

the durable connection consumer

Throws:

JMSException - if the Connection object fails to create a connection consumer due to some internal error or invalid arguments for sessionPool and messageSelector.

InvalidDestinationException - if an invalid destination is specified.

InvalidSelectorException - if the message selector is invalid.

Since:

1.1

See Also:

ConnectionConsumer