NettyComponentBuilderFactory.NettyComponentBuilder (Camel

All Superinterfaces:

ComponentBuilder<org.apache.camel.component.netty.NettyComponent>

All Known Implementing Classes:

NettyComponentBuilderFactory.NettyComponentBuilderImpl

Enclosing interface:

NettyComponentBuilderFactory
```
public static interface NettyComponentBuilderFactory.NettyComponentBuilder
extends ComponentBuilder<org.apache.camel.component.netty.NettyComponent>
```
Builder for the Netty component.

Method Summary

All Methods Instance Methods Default Methods
Modifier and Type	Method and Description
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`allowDefaultCodec(boolean allowDefaultCodec)` The netty component installs a default codec if both, encoder/decoder is null and textline is false.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`allowSerializedHeaders(boolean allowSerializedHeaders)` Only used for TCP when transferExchange is true.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`autoAppendDelimiter(boolean autoAppendDelimiter)` Whether or not to auto append missing end delimiter when sending using the textline codec.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`autowiredEnabled(boolean autowiredEnabled)` Whether autowiring is enabled.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`backlog(int backlog)` Allows to configure a backlog for netty consumer (server).
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`bossCount(int bossCount)` When netty works on nio mode, it uses default bossCount parameter from Netty, which is 1.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`bossGroup(io.netty.channel.EventLoopGroup bossGroup)` Set the BossGroup which could be used for handling the new connection of the server side across the NettyEndpoint.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`bridgeErrorHandler(boolean bridgeErrorHandler)` Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`broadcast(boolean broadcast)` Setting to choose Multicast over UDP.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`channelGroup(io.netty.channel.group.ChannelGroup channelGroup)` To use a explicit ChannelGroup.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`clientInitializerFactory(org.apache.camel.component.netty.ClientInitializerFactory clientInitializerFactory)` To use a custom ClientInitializerFactory.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`clientMode(boolean clientMode)` If the clientMode is true, netty consumer will connect the address as a TCP client.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`configuration(org.apache.camel.component.netty.NettyConfiguration configuration)` To use the NettyConfiguration as configuration when creating endpoints.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`connectTimeout(int connectTimeout)` Time to wait for a socket connection to be available.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`correlationManager(org.apache.camel.component.netty.NettyCamelStateCorrelationManager correlationManager)` To use a custom correlation manager to manage how request and reply messages are mapped when using request/reply with the netty producer.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`decoderMaxLineLength(int decoderMaxLineLength)` The max line length to use for the textline codec.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`decoders(List<io.netty.channel.ChannelHandler> decoders)` A list of decoders to be used.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`delimiter(org.apache.camel.component.netty.TextLineDelimiter delimiter)` The delimiter to use for the textline codec.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`disconnect(boolean disconnect)` Whether or not to disconnect(close) from Netty Channel right after use.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`disconnectOnNoReply(boolean disconnectOnNoReply)` If sync is enabled then this option dictates NettyConsumer if it should disconnect where there is no reply to send back.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`enabledProtocols(String enabledProtocols)` Which protocols to enable when using SSL.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`encoders(List<io.netty.channel.ChannelHandler> encoders)` A list of encoders to be used.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`encoding(String encoding)` The encoding (a charset name) to use for the textline codec.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`executorService(io.netty.util.concurrent.EventExecutorGroup executorService)` To use the given EventExecutorGroup.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`hostnameVerification(boolean hostnameVerification)` To enable/disable hostname verification on SSLEngine.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`keepAlive(boolean keepAlive)` Setting to ensure socket is not closed due to inactivity.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`keyStoreFile(File keyStoreFile)` Client side certificate keystore to be used for encryption.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`keyStoreFormat(String keyStoreFormat)` Keystore format to be used for payload encryption.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`keyStoreResource(String keyStoreResource)` Client side certificate keystore to be used for encryption.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`lazyChannelCreation(boolean lazyChannelCreation)` Channels can be lazily created to avoid exceptions, if the remote server is not up and running when the Camel producer is started.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`lazyStartProducer(boolean lazyStartProducer)` Whether the producer should be started lazy (on the first message).
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`maximumPoolSize(int maximumPoolSize)` Sets a maximum thread pool size for the netty consumer ordered thread pool.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`nativeTransport(boolean nativeTransport)` Whether to use native transport instead of NIO.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`needClientAuth(boolean needClientAuth)` Configures whether the server needs client authentication when using SSL.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`nettyServerBootstrapFactory(org.apache.camel.component.netty.NettyServerBootstrapFactory nettyServerBootstrapFactory)` To use a custom NettyServerBootstrapFactory.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`networkInterface(String networkInterface)` When using UDP then this option can be used to specify a network interface by its name, such as eth0 to join a multicast group.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`noReplyLogLevel(org.apache.camel.LoggingLevel noReplyLogLevel)` If sync is enabled this option dictates NettyConsumer which logging level to use when logging a there is no reply to send back.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`options(Map<String,Object> options)` Allows to configure additional netty options using option.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`passphrase(String passphrase)` Password setting to use in order to encrypt/decrypt payloads sent using SSH.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`producerPoolEnabled(boolean producerPoolEnabled)` Whether producer pool is enabled or not.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`producerPoolMaxActive(int producerPoolMaxActive)` Sets the cap on the number of objects that can be allocated by the pool (checked out to clients, or idle awaiting checkout) at a given time.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`producerPoolMaxIdle(int producerPoolMaxIdle)` Sets the cap on the number of idle instances in the pool.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`producerPoolMinEvictableIdle(long producerPoolMinEvictableIdle)` Sets the minimum amount of time (value in millis) an object may sit idle in the pool before it is eligible for eviction by the idle object evictor.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`producerPoolMinIdle(int producerPoolMinIdle)` Sets the minimum number of instances allowed in the producer pool before the evictor thread (if active) spawns new objects.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`receiveBufferSize(int receiveBufferSize)` The TCP/UDP buffer sizes to be used during inbound communication.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`receiveBufferSizePredictor(int receiveBufferSizePredictor)` Configures the buffer size predictor.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`reconnect(boolean reconnect)` Used only in clientMode in consumer, the consumer will attempt to reconnect on disconnection if this is enabled.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`reconnectInterval(int reconnectInterval)` Used if reconnect and clientMode is enabled.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`requestTimeout(long requestTimeout)` Allows to use a timeout for the Netty producer when calling a remote server.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`reuseAddress(boolean reuseAddress)` Setting to facilitate socket multiplexing.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`reuseChannel(boolean reuseChannel)` This option allows producers and consumers (in client mode) to reuse the same Netty Channel for the lifecycle of processing the Exchange.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`securityProvider(String securityProvider)` Security provider to be used for payload encryption.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`sendBufferSize(int sendBufferSize)` The TCP/UDP buffer sizes to be used during outbound communication.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`serverClosedChannelExceptionCaughtLogLevel(org.apache.camel.LoggingLevel serverClosedChannelExceptionCaughtLogLevel)` If the server (NettyConsumer) catches an java.nio.channels.ClosedChannelException then its logged using this logging level.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`serverExceptionCaughtLogLevel(org.apache.camel.LoggingLevel serverExceptionCaughtLogLevel)` If the server (NettyConsumer) catches an exception then its logged using this logging level.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`serverInitializerFactory(org.apache.camel.component.netty.ServerInitializerFactory serverInitializerFactory)` To use a custom ServerInitializerFactory.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`ssl(boolean ssl)` Setting to specify whether SSL encryption is applied to this endpoint.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`sslClientCertHeaders(boolean sslClientCertHeaders)` When enabled and in SSL mode, then the Netty consumer will enrich the Camel Message with headers having information about the client certificate such as subject name, issuer name, serial number, and the valid date range.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`sslContextParameters(org.apache.camel.support.jsse.SSLContextParameters sslContextParameters)` To configure security using SSLContextParameters.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`sslHandler(io.netty.handler.ssl.SslHandler sslHandler)` Reference to a class that could be used to return an SSL Handler.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`sync(boolean sync)` Setting to set endpoint as one-way or request-response.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`tcpNoDelay(boolean tcpNoDelay)` Setting to improve TCP protocol performance.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`textline(boolean textline)` Only used for TCP.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`transferExchange(boolean transferExchange)` Only used for TCP.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`trustStoreFile(File trustStoreFile)` Server side certificate keystore to be used for encryption.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`trustStoreResource(String trustStoreResource)` Server side certificate keystore to be used for encryption.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`udpByteArrayCodec(boolean udpByteArrayCodec)` For UDP only.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`udpConnectionlessSending(boolean udpConnectionlessSending)` This option supports connection less udp sending which is a real fire and forget.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`useByteBuf(boolean useByteBuf)` If the useByteBuf is true, netty producer will turn the message body into ByteBuf before sending it out.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`useGlobalSslContextParameters(boolean useGlobalSslContextParameters)` Enable usage of global SSL context parameters.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`usingExecutorService(boolean usingExecutorService)` Whether to use ordered thread pool, to ensure events are processed orderly on the same channel.
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`workerCount(int workerCount)` When netty works on nio mode, it uses default workerCount parameter from Netty (which is cpu_core_threads x 2).
`default NettyComponentBuilderFactory.NettyComponentBuilder`	`workerGroup(io.netty.channel.EventLoopGroup workerGroup)` To use a explicit EventLoopGroup as the boss thread pool.

Methods inherited from interface org.apache.camel.builder.component.ComponentBuilder
build, build, doSetProperty, register

- Method Detail
  - configuration
```
default NettyComponentBuilderFactory.NettyComponentBuilder configuration(org.apache.camel.component.netty.NettyConfiguration configuration)
```
    To use the NettyConfiguration as configuration when creating endpoints. The option is a: <code>org.apache.camel.component.netty.NettyConfiguration</code> type. Group: common
    
    Parameters:
    
    configuration - the value to set
    
    Returns:
    
    the dsl builder
  - disconnect
```
default NettyComponentBuilderFactory.NettyComponentBuilder disconnect(boolean disconnect)
```
    Whether or not to disconnect(close) from Netty Channel right after use. Can be used for both consumer and producer. The option is a: <code>boolean</code> type. Default: false Group: common
    
    Parameters:
    
    disconnect - the value to set
    
    Returns:
    
    the dsl builder
  - keepAlive
```
default NettyComponentBuilderFactory.NettyComponentBuilder keepAlive(boolean keepAlive)
```
    Setting to ensure socket is not closed due to inactivity. The option is a: <code>boolean</code> type. Default: true Group: common
    
    Parameters:
    
    keepAlive - the value to set
    
    Returns:
    
    the dsl builder
  - reuseAddress
```
default NettyComponentBuilderFactory.NettyComponentBuilder reuseAddress(boolean reuseAddress)
```
    Setting to facilitate socket multiplexing. The option is a: <code>boolean</code> type. Default: true Group: common
    
    Parameters:
    
    reuseAddress - the value to set
    
    Returns:
    
    the dsl builder
  - reuseChannel
```
default NettyComponentBuilderFactory.NettyComponentBuilder reuseChannel(boolean reuseChannel)
```
    This option allows producers and consumers (in client mode) to reuse the same Netty Channel for the lifecycle of processing the Exchange. This is useful if you need to call a server multiple times in a Camel route and want to use the same network connection. When using this, the channel is not returned to the connection pool until the Exchange is done; or disconnected if the disconnect option is set to true. The reused Channel is stored on the Exchange as an exchange property with the key NettyConstants#NETTY_CHANNEL which allows you to obtain the channel during routing and use it as well. The option is a: <code>boolean</code> type. Default: false Group: common
    
    Parameters:
    
    reuseChannel - the value to set
    
    Returns:
    
    the dsl builder
  - sync
```
default NettyComponentBuilderFactory.NettyComponentBuilder sync(boolean sync)
```
    Setting to set endpoint as one-way or request-response. The option is a: <code>boolean</code> type. Default: true Group: common
    
    Parameters:
    
    sync - the value to set
    
    Returns:
    
    the dsl builder
  - tcpNoDelay
```
default NettyComponentBuilderFactory.NettyComponentBuilder tcpNoDelay(boolean tcpNoDelay)
```
    Setting to improve TCP protocol performance. The option is a: <code>boolean</code> type. Default: true Group: common
    
    Parameters:
    
    tcpNoDelay - the value to set
    
    Returns:
    
    the dsl builder
  - bridgeErrorHandler
```
default NettyComponentBuilderFactory.NettyComponentBuilder bridgeErrorHandler(boolean bridgeErrorHandler)
```
    Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. The option is a: <code>boolean</code> type. Default: false Group: consumer
    
    Parameters:
    
    bridgeErrorHandler - the value to set
    
    Returns:
    
    the dsl builder
  - broadcast
```
default NettyComponentBuilderFactory.NettyComponentBuilder broadcast(boolean broadcast)
```
    Setting to choose Multicast over UDP. The option is a: <code>boolean</code> type. Default: false Group: consumer
    
    Parameters:
    
    broadcast - the value to set
    
    Returns:
    
    the dsl builder
  - clientMode
```
default NettyComponentBuilderFactory.NettyComponentBuilder clientMode(boolean clientMode)
```
    If the clientMode is true, netty consumer will connect the address as a TCP client. The option is a: <code>boolean</code> type. Default: false Group: consumer
    
    Parameters:
    
    clientMode - the value to set
    
    Returns:
    
    the dsl builder
  - reconnect
```
default NettyComponentBuilderFactory.NettyComponentBuilder reconnect(boolean reconnect)
```
    Used only in clientMode in consumer, the consumer will attempt to reconnect on disconnection if this is enabled. The option is a: <code>boolean</code> type. Default: true Group: consumer
    
    Parameters:
    
    reconnect - the value to set
    
    Returns:
    
    the dsl builder
  - reconnectInterval
```
default NettyComponentBuilderFactory.NettyComponentBuilder reconnectInterval(int reconnectInterval)
```
    Used if reconnect and clientMode is enabled. The interval in milli seconds to attempt reconnection. The option is a: <code>int</code> type. Default: 10000 Group: consumer
    
    Parameters:
    
    reconnectInterval - the value to set
    
    Returns:
    
    the dsl builder
  - backlog
```
default NettyComponentBuilderFactory.NettyComponentBuilder backlog(int backlog)
```
    Allows to configure a backlog for netty consumer (server). Note the backlog is just a best effort depending on the OS. Setting this option to a value such as 200, 500 or 1000, tells the TCP stack how long the accept queue can be If this option is not configured, then the backlog depends on OS setting. The option is a: <code>int</code> type. Group: consumer (advanced)
    
    Parameters:
    
    backlog - the value to set
    
    Returns:
    
    the dsl builder
  - bossCount
```
default NettyComponentBuilderFactory.NettyComponentBuilder bossCount(int bossCount)
```
    When netty works on nio mode, it uses default bossCount parameter from Netty, which is 1. User can use this option to override the default bossCount from Netty. The option is a: <code>int</code> type. Default: 1 Group: consumer (advanced)
    
    Parameters:
    
    bossCount - the value to set
    
    Returns:
    
    the dsl builder
  - bossGroup
```
default NettyComponentBuilderFactory.NettyComponentBuilder bossGroup(io.netty.channel.EventLoopGroup bossGroup)
```
    Set the BossGroup which could be used for handling the new connection of the server side across the NettyEndpoint. The option is a: <code>io.netty.channel.EventLoopGroup</code> type. Group: consumer (advanced)
    
    Parameters:
    
    bossGroup - the value to set
    
    Returns:
    
    the dsl builder
  - disconnectOnNoReply
```
default NettyComponentBuilderFactory.NettyComponentBuilder disconnectOnNoReply(boolean disconnectOnNoReply)
```
    If sync is enabled then this option dictates NettyConsumer if it should disconnect where there is no reply to send back. The option is a: <code>boolean</code> type. Default: true Group: consumer (advanced)
    
    Parameters:
    
    disconnectOnNoReply - the value to set
    
    Returns:
    
    the dsl builder
  - executorService
```
default NettyComponentBuilderFactory.NettyComponentBuilder executorService(io.netty.util.concurrent.EventExecutorGroup executorService)
```
    To use the given EventExecutorGroup. The option is a: <code>io.netty.util.concurrent.EventExecutorGroup</code> type. Group: consumer (advanced)
    
    Parameters:
    
    executorService - the value to set
    
    Returns:
    
    the dsl builder
  - maximumPoolSize
```
default NettyComponentBuilderFactory.NettyComponentBuilder maximumPoolSize(int maximumPoolSize)
```
    Sets a maximum thread pool size for the netty consumer ordered thread pool. The default size is 2 x cpu_core plus 1. Setting this value to eg 10 will then use 10 threads unless 2 x cpu_core plus 1 is a higher value, which then will override and be used. For example if there are 8 cores, then the consumer thread pool will be 17. This thread pool is used to route messages received from Netty by Camel. We use a separate thread pool to ensure ordering of messages and also in case some messages will block, then nettys worker threads (event loop) wont be affected. The option is a: <code>int</code> type. Group: consumer (advanced)
    
    Parameters:
    
    maximumPoolSize - the value to set
    
    Returns:
    
    the dsl builder
  - nettyServerBootstrapFactory
```
default NettyComponentBuilderFactory.NettyComponentBuilder nettyServerBootstrapFactory(org.apache.camel.component.netty.NettyServerBootstrapFactory nettyServerBootstrapFactory)
```
    To use a custom NettyServerBootstrapFactory. The option is a: <code>org.apache.camel.component.netty.NettyServerBootstrapFactory</code> type. Group: consumer (advanced)
    
    Parameters:
    
    nettyServerBootstrapFactory - the value to set
    
    Returns:
    
    the dsl builder
  - networkInterface
```
default NettyComponentBuilderFactory.NettyComponentBuilder networkInterface(String networkInterface)
```
    When using UDP then this option can be used to specify a network interface by its name, such as eth0 to join a multicast group. The option is a: <code>java.lang.String</code> type. Group: consumer (advanced)
    
    Parameters:
    
    networkInterface - the value to set
    
    Returns:
    
    the dsl builder
  - noReplyLogLevel
```
default NettyComponentBuilderFactory.NettyComponentBuilder noReplyLogLevel(org.apache.camel.LoggingLevel noReplyLogLevel)
```
    If sync is enabled this option dictates NettyConsumer which logging level to use when logging a there is no reply to send back. The option is a: <code>org.apache.camel.LoggingLevel</code> type. Default: WARN Group: consumer (advanced)
    
    Parameters:
    
    noReplyLogLevel - the value to set
    
    Returns:
    
    the dsl builder
  - serverClosedChannelExceptionCaughtLogLevel
```
default NettyComponentBuilderFactory.NettyComponentBuilder serverClosedChannelExceptionCaughtLogLevel(org.apache.camel.LoggingLevel serverClosedChannelExceptionCaughtLogLevel)
```
    If the server (NettyConsumer) catches an java.nio.channels.ClosedChannelException then its logged using this logging level. This is used to avoid logging the closed channel exceptions, as clients can disconnect abruptly and then cause a flood of closed exceptions in the Netty server. The option is a: <code>org.apache.camel.LoggingLevel</code> type. Default: DEBUG Group: consumer (advanced)
    
    Parameters:
    
    serverClosedChannelExceptionCaughtLogLevel - the value to set
    
    Returns:
    
    the dsl builder
  - serverExceptionCaughtLogLevel
```
default NettyComponentBuilderFactory.NettyComponentBuilder serverExceptionCaughtLogLevel(org.apache.camel.LoggingLevel serverExceptionCaughtLogLevel)
```
    If the server (NettyConsumer) catches an exception then its logged using this logging level. The option is a: <code>org.apache.camel.LoggingLevel</code> type. Default: WARN Group: consumer (advanced)
    
    Parameters:
    
    serverExceptionCaughtLogLevel - the value to set
    
    Returns:
    
    the dsl builder
  - serverInitializerFactory
```
default NettyComponentBuilderFactory.NettyComponentBuilder serverInitializerFactory(org.apache.camel.component.netty.ServerInitializerFactory serverInitializerFactory)
```
    To use a custom ServerInitializerFactory. The option is a: <code>org.apache.camel.component.netty.ServerInitializerFactory</code> type. Group: consumer (advanced)
    
    Parameters:
    
    serverInitializerFactory - the value to set
    
    Returns:
    
    the dsl builder
  - usingExecutorService
```
default NettyComponentBuilderFactory.NettyComponentBuilder usingExecutorService(boolean usingExecutorService)
```
    Whether to use ordered thread pool, to ensure events are processed orderly on the same channel. The option is a: <code>boolean</code> type. Default: true Group: consumer (advanced)
    
    Parameters:
    
    usingExecutorService - the value to set
    
    Returns:
    
    the dsl builder
  - connectTimeout
```
default NettyComponentBuilderFactory.NettyComponentBuilder connectTimeout(int connectTimeout)
```
    Time to wait for a socket connection to be available. Value is in milliseconds. The option is a: <code>int</code> type. Default: 10000 Group: producer
    
    Parameters:
    
    connectTimeout - the value to set
    
    Returns:
    
    the dsl builder
  - lazyStartProducer
```
default NettyComponentBuilderFactory.NettyComponentBuilder lazyStartProducer(boolean lazyStartProducer)
```
    Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel's routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. The option is a: <code>boolean</code> type. Default: false Group: producer
    
    Parameters:
    
    lazyStartProducer - the value to set
    
    Returns:
    
    the dsl builder
  - requestTimeout
```
default NettyComponentBuilderFactory.NettyComponentBuilder requestTimeout(long requestTimeout)
```
    Allows to use a timeout for the Netty producer when calling a remote server. By default no timeout is in use. The value is in milli seconds, so eg 30000 is 30 seconds. The requestTimeout is using Netty's ReadTimeoutHandler to trigger the timeout. The option is a: <code>long</code> type. Group: producer
    
    Parameters:
    
    requestTimeout - the value to set
    
    Returns:
    
    the dsl builder
  - clientInitializerFactory
```
default NettyComponentBuilderFactory.NettyComponentBuilder clientInitializerFactory(org.apache.camel.component.netty.ClientInitializerFactory clientInitializerFactory)
```
    To use a custom ClientInitializerFactory. The option is a: <code>org.apache.camel.component.netty.ClientInitializerFactory</code> type. Group: producer (advanced)
    
    Parameters:
    
    clientInitializerFactory - the value to set
    
    Returns:
    
    the dsl builder
  - correlationManager
```
default NettyComponentBuilderFactory.NettyComponentBuilder correlationManager(org.apache.camel.component.netty.NettyCamelStateCorrelationManager correlationManager)
```
    To use a custom correlation manager to manage how request and reply messages are mapped when using request/reply with the netty producer. This should only be used if you have a way to map requests together with replies such as if there is correlation ids in both the request and reply messages. This can be used if you want to multiplex concurrent messages on the same channel (aka connection) in netty. When doing this you must have a way to correlate the request and reply messages so you can store the right reply on the inflight Camel Exchange before its continued routed. We recommend extending the TimeoutCorrelationManagerSupport when you build custom correlation managers. This provides support for timeout and other complexities you otherwise would need to implement as well. See also the producerPoolEnabled option for more details. The option is a: <code>org.apache.camel.component.netty.NettyCamelStateCorrelationManager</code> type. Group: producer (advanced)
    
    Parameters:
    
    correlationManager - the value to set
    
    Returns:
    
    the dsl builder
  - lazyChannelCreation
```
default NettyComponentBuilderFactory.NettyComponentBuilder lazyChannelCreation(boolean lazyChannelCreation)
```
    Channels can be lazily created to avoid exceptions, if the remote server is not up and running when the Camel producer is started. The option is a: <code>boolean</code> type. Default: true Group: producer (advanced)
    
    Parameters:
    
    lazyChannelCreation - the value to set
    
    Returns:
    
    the dsl builder
  - producerPoolEnabled
```
default NettyComponentBuilderFactory.NettyComponentBuilder producerPoolEnabled(boolean producerPoolEnabled)
```
    Whether producer pool is enabled or not. Important: If you turn this off then a single shared connection is used for the producer, also if you are doing request/reply. That means there is a potential issue with interleaved responses if replies comes back out-of-order. Therefore you need to have a correlation id in both the request and reply messages so you can properly correlate the replies to the Camel callback that is responsible for continue processing the message in Camel. To do this you need to implement NettyCamelStateCorrelationManager as correlation manager and configure it via the correlationManager option. See also the correlationManager option for more details. The option is a: <code>boolean</code> type. Default: true Group: producer (advanced)
    
    Parameters:
    
    producerPoolEnabled - the value to set
    
    Returns:
    
    the dsl builder
  - producerPoolMaxActive
```
default NettyComponentBuilderFactory.NettyComponentBuilder producerPoolMaxActive(int producerPoolMaxActive)
```
    Sets the cap on the number of objects that can be allocated by the pool (checked out to clients, or idle awaiting checkout) at a given time. Use a negative value for no limit. The option is a: <code>int</code> type. Default: -1 Group: producer (advanced)
    
    Parameters:
    
    producerPoolMaxActive - the value to set
    
    Returns:
    
    the dsl builder
  - producerPoolMaxIdle
```
default NettyComponentBuilderFactory.NettyComponentBuilder producerPoolMaxIdle(int producerPoolMaxIdle)
```
    Sets the cap on the number of idle instances in the pool. The option is a: <code>int</code> type. Default: 100 Group: producer (advanced)
    
    Parameters:
    
    producerPoolMaxIdle - the value to set
    
    Returns:
    
    the dsl builder
  - producerPoolMinEvictableIdle
```
default NettyComponentBuilderFactory.NettyComponentBuilder producerPoolMinEvictableIdle(long producerPoolMinEvictableIdle)
```
    Sets the minimum amount of time (value in millis) an object may sit idle in the pool before it is eligible for eviction by the idle object evictor. The option is a: <code>long</code> type. Default: 300000 Group: producer (advanced)
    
    Parameters:
    
    producerPoolMinEvictableIdle - the value to set
    
    Returns:
    
    the dsl builder
  - producerPoolMinIdle
```
default NettyComponentBuilderFactory.NettyComponentBuilder producerPoolMinIdle(int producerPoolMinIdle)
```
    Sets the minimum number of instances allowed in the producer pool before the evictor thread (if active) spawns new objects. The option is a: <code>int</code> type. Group: producer (advanced)
    
    Parameters:
    
    producerPoolMinIdle - the value to set
    
    Returns:
    
    the dsl builder
  - udpConnectionlessSending
```
default NettyComponentBuilderFactory.NettyComponentBuilder udpConnectionlessSending(boolean udpConnectionlessSending)
```
    This option supports connection less udp sending which is a real fire and forget. A connected udp send receive the PortUnreachableException if no one is listen on the receiving port. The option is a: <code>boolean</code> type. Default: false Group: producer (advanced)
    
    Parameters:
    
    udpConnectionlessSending - the value to set
    
    Returns:
    
    the dsl builder
  - useByteBuf
```
default NettyComponentBuilderFactory.NettyComponentBuilder useByteBuf(boolean useByteBuf)
```
    If the useByteBuf is true, netty producer will turn the message body into ByteBuf before sending it out. The option is a: <code>boolean</code> type. Default: false Group: producer (advanced)
    
    Parameters:
    
    useByteBuf - the value to set
    
    Returns:
    
    the dsl builder
  - hostnameVerification
```
default NettyComponentBuilderFactory.NettyComponentBuilder hostnameVerification(boolean hostnameVerification)
```
    To enable/disable hostname verification on SSLEngine. The option is a: <code>boolean</code> type. Default: false Group: security
    
    Parameters:
    
    hostnameVerification - the value to set
    
    Returns:
    
    the dsl builder
  - allowSerializedHeaders
```
default NettyComponentBuilderFactory.NettyComponentBuilder allowSerializedHeaders(boolean allowSerializedHeaders)
```
    Only used for TCP when transferExchange is true. When set to true, serializable objects in headers and properties will be added to the exchange. Otherwise Camel will exclude any non-serializable objects and log it at WARN level. The option is a: <code>boolean</code> type. Default: false Group: advanced
    
    Parameters:
    
    allowSerializedHeaders - the value to set
    
    Returns:
    
    the dsl builder
  - autowiredEnabled
```
default NettyComponentBuilderFactory.NettyComponentBuilder autowiredEnabled(boolean autowiredEnabled)
```
    Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. The option is a: <code>boolean</code> type. Default: true Group: advanced
    
    Parameters:
    
    autowiredEnabled - the value to set
    
    Returns:
    
    the dsl builder
  - channelGroup
```
default NettyComponentBuilderFactory.NettyComponentBuilder channelGroup(io.netty.channel.group.ChannelGroup channelGroup)
```
    To use a explicit ChannelGroup. The option is a: <code>io.netty.channel.group.ChannelGroup</code> type. Group: advanced
    
    Parameters:
    
    channelGroup - the value to set
    
    Returns:
    
    the dsl builder
  - nativeTransport
```
default NettyComponentBuilderFactory.NettyComponentBuilder nativeTransport(boolean nativeTransport)
```
    Whether to use native transport instead of NIO. Native transport takes advantage of the host operating system and is only supported on some platforms. You need to add the netty JAR for the host operating system you are using. See more details at: http://netty.io/wiki/native-transports.html. The option is a: <code>boolean</code> type. Default: false Group: advanced
    
    Parameters:
    
    nativeTransport - the value to set
    
    Returns:
    
    the dsl builder
  - options
```
default NettyComponentBuilderFactory.NettyComponentBuilder options(Map<String,Object> options)
```
    Allows to configure additional netty options using option. as prefix. For example option.child.keepAlive=false to set the netty option child.keepAlive=false. See the Netty documentation for possible options that can be used. The option is a: <code>java.util.Map<java.lang.String, java.lang.Object></code> type. Group: advanced
    
    Parameters:
    
    options - the value to set
    
    Returns:
    
    the dsl builder
  - receiveBufferSize
```
default NettyComponentBuilderFactory.NettyComponentBuilder receiveBufferSize(int receiveBufferSize)
```
    The TCP/UDP buffer sizes to be used during inbound communication. Size is bytes. The option is a: <code>int</code> type. Default: 65536 Group: advanced
    
    Parameters:
    
    receiveBufferSize - the value to set
    
    Returns:
    
    the dsl builder
  - receiveBufferSizePredictor
```
default NettyComponentBuilderFactory.NettyComponentBuilder receiveBufferSizePredictor(int receiveBufferSizePredictor)
```
    Configures the buffer size predictor. See details at Jetty documentation and this mail thread. The option is a: <code>int</code> type. Group: advanced
    
    Parameters:
    
    receiveBufferSizePredictor - the value to set
    
    Returns:
    
    the dsl builder
  - sendBufferSize
```
default NettyComponentBuilderFactory.NettyComponentBuilder sendBufferSize(int sendBufferSize)
```
    The TCP/UDP buffer sizes to be used during outbound communication. Size is bytes. The option is a: <code>int</code> type. Default: 65536 Group: advanced
    
    Parameters:
    
    sendBufferSize - the value to set
    
    Returns:
    
    the dsl builder
  - transferExchange
```
default NettyComponentBuilderFactory.NettyComponentBuilder transferExchange(boolean transferExchange)
```
    Only used for TCP. You can transfer the exchange over the wire instead of just the body. The following fields are transferred: In body, Out body, fault body, In headers, Out headers, fault headers, exchange properties, exchange exception. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level. The option is a: <code>boolean</code> type. Default: false Group: advanced
    
    Parameters:
    
    transferExchange - the value to set
    
    Returns:
    
    the dsl builder
  - udpByteArrayCodec
```
default NettyComponentBuilderFactory.NettyComponentBuilder udpByteArrayCodec(boolean udpByteArrayCodec)
```
    For UDP only. If enabled the using byte array codec instead of Java serialization protocol. The option is a: <code>boolean</code> type. Default: false Group: advanced
    
    Parameters:
    
    udpByteArrayCodec - the value to set
    
    Returns:
    
    the dsl builder
  - workerCount
```
default NettyComponentBuilderFactory.NettyComponentBuilder workerCount(int workerCount)
```
    When netty works on nio mode, it uses default workerCount parameter from Netty (which is cpu_core_threads x 2). User can use this option to override the default workerCount from Netty. The option is a: <code>int</code> type. Group: advanced
    
    Parameters:
    
    workerCount - the value to set
    
    Returns:
    
    the dsl builder
  - workerGroup
```
default NettyComponentBuilderFactory.NettyComponentBuilder workerGroup(io.netty.channel.EventLoopGroup workerGroup)
```
    To use a explicit EventLoopGroup as the boss thread pool. For example to share a thread pool with multiple consumers or producers. By default each consumer or producer has their own worker pool with 2 x cpu count core threads. The option is a: <code>io.netty.channel.EventLoopGroup</code> type. Group: advanced
    
    Parameters:
    
    workerGroup - the value to set
    
    Returns:
    
    the dsl builder
  - allowDefaultCodec
```
default NettyComponentBuilderFactory.NettyComponentBuilder allowDefaultCodec(boolean allowDefaultCodec)
```
    The netty component installs a default codec if both, encoder/decoder is null and textline is false. Setting allowDefaultCodec to false prevents the netty component from installing a default codec as the first element in the filter chain. The option is a: <code>boolean</code> type. Default: true Group: codec
    
    Parameters:
    
    allowDefaultCodec - the value to set
    
    Returns:
    
    the dsl builder
  - autoAppendDelimiter
```
default NettyComponentBuilderFactory.NettyComponentBuilder autoAppendDelimiter(boolean autoAppendDelimiter)
```
    Whether or not to auto append missing end delimiter when sending using the textline codec. The option is a: <code>boolean</code> type. Default: true Group: codec
    
    Parameters:
    
    autoAppendDelimiter - the value to set
    
    Returns:
    
    the dsl builder
  - decoderMaxLineLength
```
default NettyComponentBuilderFactory.NettyComponentBuilder decoderMaxLineLength(int decoderMaxLineLength)
```
    The max line length to use for the textline codec. The option is a: <code>int</code> type. Default: 1024 Group: codec
    
    Parameters:
    
    decoderMaxLineLength - the value to set
    
    Returns:
    
    the dsl builder
  - decoders
```
default NettyComponentBuilderFactory.NettyComponentBuilder decoders(List<io.netty.channel.ChannelHandler> decoders)
```
    A list of decoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup. The option is a: <code>java.util.List<io.netty.channel.ChannelHandler></code> type. Group: codec
    
    Parameters:
    
    decoders - the value to set
    
    Returns:
    
    the dsl builder
  - delimiter
```
default NettyComponentBuilderFactory.NettyComponentBuilder delimiter(org.apache.camel.component.netty.TextLineDelimiter delimiter)
```
    The delimiter to use for the textline codec. Possible values are LINE and NULL. The option is a: <code>org.apache.camel.component.netty.TextLineDelimiter</code> type. Default: LINE Group: codec
    
    Parameters:
    
    delimiter - the value to set
    
    Returns:
    
    the dsl builder
  - encoders
```
default NettyComponentBuilderFactory.NettyComponentBuilder encoders(List<io.netty.channel.ChannelHandler> encoders)
```
    A list of encoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup. The option is a: <code>java.util.List<io.netty.channel.ChannelHandler></code> type. Group: codec
    
    Parameters:
    
    encoders - the value to set
    
    Returns:
    
    the dsl builder
  - encoding
```
default NettyComponentBuilderFactory.NettyComponentBuilder encoding(String encoding)
```
    The encoding (a charset name) to use for the textline codec. If not provided, Camel will use the JVM default Charset. The option is a: <code>java.lang.String</code> type. Group: codec
    
    Parameters:
    
    encoding - the value to set
    
    Returns:
    
    the dsl builder
  - textline
```
default NettyComponentBuilderFactory.NettyComponentBuilder textline(boolean textline)
```
    Only used for TCP. If no codec is specified, you can use this flag to indicate a text line based codec; if not specified or the value is false, then Object Serialization is assumed over TCP - however only Strings are allowed to be serialized by default. The option is a: <code>boolean</code> type. Default: false Group: codec
    
    Parameters:
    
    textline - the value to set
    
    Returns:
    
    the dsl builder
  - enabledProtocols
```
default NettyComponentBuilderFactory.NettyComponentBuilder enabledProtocols(String enabledProtocols)
```
    Which protocols to enable when using SSL. The option is a: <code>java.lang.String</code> type. Default: TLSv1,TLSv1.1,TLSv1.2 Group: security
    
    Parameters:
    
    enabledProtocols - the value to set
    
    Returns:
    
    the dsl builder
  - keyStoreFile
```
default NettyComponentBuilderFactory.NettyComponentBuilder keyStoreFile(File keyStoreFile)
```
    Client side certificate keystore to be used for encryption. The option is a: <code>java.io.File</code> type. Group: security
    
    Parameters:
    
    keyStoreFile - the value to set
    
    Returns:
    
    the dsl builder
  - keyStoreFormat
```
default NettyComponentBuilderFactory.NettyComponentBuilder keyStoreFormat(String keyStoreFormat)
```
    Keystore format to be used for payload encryption. Defaults to JKS if not set. The option is a: <code>java.lang.String</code> type. Group: security
    
    Parameters:
    
    keyStoreFormat - the value to set
    
    Returns:
    
    the dsl builder
  - keyStoreResource
```
default NettyComponentBuilderFactory.NettyComponentBuilder keyStoreResource(String keyStoreResource)
```
    Client side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems. The option is a: <code>java.lang.String</code> type. Group: security
    
    Parameters:
    
    keyStoreResource - the value to set
    
    Returns:
    
    the dsl builder
  - needClientAuth
```
default NettyComponentBuilderFactory.NettyComponentBuilder needClientAuth(boolean needClientAuth)
```
    Configures whether the server needs client authentication when using SSL. The option is a: <code>boolean</code> type. Default: false Group: security
    
    Parameters:
    
    needClientAuth - the value to set
    
    Returns:
    
    the dsl builder
  - passphrase
```
default NettyComponentBuilderFactory.NettyComponentBuilder passphrase(String passphrase)
```
    Password setting to use in order to encrypt/decrypt payloads sent using SSH. The option is a: <code>java.lang.String</code> type. Group: security
    
    Parameters:
    
    passphrase - the value to set
    
    Returns:
    
    the dsl builder
  - securityProvider
```
default NettyComponentBuilderFactory.NettyComponentBuilder securityProvider(String securityProvider)
```
    Security provider to be used for payload encryption. Defaults to SunX509 if not set. The option is a: <code>java.lang.String</code> type. Group: security
    
    Parameters:
    
    securityProvider - the value to set
    
    Returns:
    
    the dsl builder
  - ssl
```
default NettyComponentBuilderFactory.NettyComponentBuilder ssl(boolean ssl)
```
    Setting to specify whether SSL encryption is applied to this endpoint. The option is a: <code>boolean</code> type. Default: false Group: security
    
    Parameters:
    
    ssl - the value to set
    
    Returns:
    
    the dsl builder
  - sslClientCertHeaders
```
default NettyComponentBuilderFactory.NettyComponentBuilder sslClientCertHeaders(boolean sslClientCertHeaders)
```
    When enabled and in SSL mode, then the Netty consumer will enrich the Camel Message with headers having information about the client certificate such as subject name, issuer name, serial number, and the valid date range. The option is a: <code>boolean</code> type. Default: false Group: security
    
    Parameters:
    
    sslClientCertHeaders - the value to set
    
    Returns:
    
    the dsl builder
  - sslContextParameters
```
default NettyComponentBuilderFactory.NettyComponentBuilder sslContextParameters(org.apache.camel.support.jsse.SSLContextParameters sslContextParameters)
```
    To configure security using SSLContextParameters. The option is a: <code>org.apache.camel.support.jsse.SSLContextParameters</code> type. Group: security
    
    Parameters:
    
    sslContextParameters - the value to set
    
    Returns:
    
    the dsl builder
  - sslHandler
```
default NettyComponentBuilderFactory.NettyComponentBuilder sslHandler(io.netty.handler.ssl.SslHandler sslHandler)
```
    Reference to a class that could be used to return an SSL Handler. The option is a: <code>io.netty.handler.ssl.SslHandler</code> type. Group: security
    
    Parameters:
    
    sslHandler - the value to set
    
    Returns:
    
    the dsl builder
  - trustStoreFile
```
default NettyComponentBuilderFactory.NettyComponentBuilder trustStoreFile(File trustStoreFile)
```
    Server side certificate keystore to be used for encryption. The option is a: <code>java.io.File</code> type. Group: security
    
    Parameters:
    
    trustStoreFile - the value to set
    
    Returns:
    
    the dsl builder
  - trustStoreResource
```
default NettyComponentBuilderFactory.NettyComponentBuilder trustStoreResource(String trustStoreResource)
```
    Server side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems. The option is a: <code>java.lang.String</code> type. Group: security
    
    Parameters:
    
    trustStoreResource - the value to set
    
    Returns:
    
    the dsl builder
  - useGlobalSslContextParameters
```
default NettyComponentBuilderFactory.NettyComponentBuilder useGlobalSslContextParameters(boolean useGlobalSslContextParameters)
```
    Enable usage of global SSL context parameters. The option is a: <code>boolean</code> type. Default: false Group: security
    
    Parameters:
    
    useGlobalSslContextParameters - the value to set
    
    Returns:
    
    the dsl builder

Interface NettyComponentBuilderFactory.NettyComponentBuilder

Method Summary

Methods inherited from interface org.apache.camel.builder.component.ComponentBuilder

Method Detail

configuration

disconnect

keepAlive

reuseAddress

reuseChannel

sync

tcpNoDelay

bridgeErrorHandler

broadcast

clientMode

reconnect

reconnectInterval

backlog

bossCount

bossGroup

disconnectOnNoReply

executorService

maximumPoolSize

nettyServerBootstrapFactory

networkInterface

noReplyLogLevel

serverClosedChannelExceptionCaughtLogLevel

serverExceptionCaughtLogLevel

serverInitializerFactory

usingExecutorService

connectTimeout

lazyStartProducer

requestTimeout

clientInitializerFactory

correlationManager

lazyChannelCreation

producerPoolEnabled

producerPoolMaxActive

producerPoolMaxIdle

producerPoolMinEvictableIdle

producerPoolMinIdle

udpConnectionlessSending

useByteBuf

hostnameVerification

allowSerializedHeaders

autowiredEnabled

channelGroup

nativeTransport

options

receiveBufferSize

receiveBufferSizePredictor

sendBufferSize

transferExchange

udpByteArrayCodec

workerCount

workerGroup

allowDefaultCodec

autoAppendDelimiter

decoderMaxLineLength

decoders

delimiter

encoders

encoding

textline

enabledProtocols

keyStoreFile

keyStoreFormat

keyStoreResource

needClientAuth

passphrase

securityProvider

ssl

sslClientCertHeaders

sslContextParameters

sslHandler

trustStoreFile

trustStoreResource

useGlobalSslContextParameters