SmppComponentBuilderFactory.SmppComponentBuilder (Camel

All Superinterfaces:

ComponentBuilder<org.apache.camel.component.smpp.SmppComponent>

All Known Implementing Classes:

SmppComponentBuilderFactory.SmppComponentBuilderImpl

Enclosing interface:

SmppComponentBuilderFactory
```
public static interface SmppComponentBuilderFactory.SmppComponentBuilder
extends ComponentBuilder<org.apache.camel.component.smpp.SmppComponent>
```
Builder for the SMPP component.

Method Summary

All Methods Instance Methods Default Methods
Modifier and Type	Method and Description
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`addressRange(String addressRange)` You can specify the address range for the SmppConsumer as defined in section 5.2.7 of the SMPP 3.4 specification.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`alphabet(byte alphabet)` Defines encoding of data according the SMPP 3.4 specification, section 5.2.19.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`autowiredEnabled(boolean autowiredEnabled)` Whether autowiring is enabled.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`bridgeErrorHandler(boolean bridgeErrorHandler)` Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`configuration(org.apache.camel.component.smpp.SmppConfiguration configuration)` To use the shared SmppConfiguration as configuration.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`dataCoding(byte dataCoding)` Defines the data coding according the SMPP 3.4 specification, section 5.2.19.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`destAddr(String destAddr)` Defines the destination SME address.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`destAddrNpi(byte destAddrNpi)` Defines the type of number (TON) to be used in the SME destination address parameters.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`destAddrTon(byte destAddrTon)` Defines the type of number (TON) to be used in the SME destination address parameters.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`encoding(String encoding)` Defines the encoding scheme of the short message user data.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`enquireLinkTimer(Integer enquireLinkTimer)` Defines the interval in milliseconds between the confidence checks.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`httpProxyHost(String httpProxyHost)` If you need to tunnel SMPP through a HTTP proxy, set this attribute to the hostname or ip address of your HTTP proxy.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`httpProxyPassword(String httpProxyPassword)` If your HTTP proxy requires basic authentication, set this attribute to the password required for your HTTP proxy.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`httpProxyPort(Integer httpProxyPort)` If you need to tunnel SMPP through a HTTP proxy, set this attribute to the port of your HTTP proxy.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`httpProxyUsername(String httpProxyUsername)` If your HTTP proxy requires basic authentication, set this attribute to the username required for your HTTP proxy.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`initialReconnectDelay(long initialReconnectDelay)` Defines the initial delay in milliseconds after the consumer/producer tries to reconnect to the SMSC, after the connection was lost.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`lazySessionCreation(boolean lazySessionCreation)` Sessions can be lazily created to avoid exceptions, if the SMSC is not available when the Camel producer is started.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`lazyStartProducer(boolean lazyStartProducer)` Whether the producer should be started lazy (on the first message).
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`maxReconnect(int maxReconnect)` Defines the maximum number of attempts to reconnect to the SMSC, if SMSC returns a negative bind response.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`numberingPlanIndicator(byte numberingPlanIndicator)` Defines the numeric plan indicator (NPI) to be used in the SME.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`password(String password)` The password for connecting to SMSC server.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`priorityFlag(byte priorityFlag)` Allows the originating SME to assign a priority level to the short message.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`protocolId(byte protocolId)` The protocol id.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`proxyHeaders(Map<String,String> proxyHeaders)` These headers will be passed to the proxy server while establishing the connection.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`reconnectDelay(long reconnectDelay)` Defines the interval in milliseconds between the reconnect attempts, if the connection to the SMSC was lost and the previous was not succeed.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`registeredDelivery(byte registeredDelivery)` Is used to request an SMSC delivery receipt and/or SME originated acknowledgements.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`replaceIfPresentFlag(byte replaceIfPresentFlag)` Used to request the SMSC to replace a previously submitted message, that is still pending delivery.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`serviceType(String serviceType)` The service type parameter can be used to indicate the SMS Application service associated with the message.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`sessionStateListener(org.jsmpp.session.SessionStateListener sessionStateListener)` You can refer to a org.jsmpp.session.SessionStateListener in the Registry to receive callbacks when the session state changed.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`sourceAddr(String sourceAddr)` Defines the address of SME (Short Message Entity) which originated this message.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`sourceAddrNpi(byte sourceAddrNpi)` Defines the numeric plan indicator (NPI) to be used in the SME originator address parameters.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`sourceAddrTon(byte sourceAddrTon)` Defines the type of number (TON) to be used in the SME originator address parameters.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`splittingPolicy(org.apache.camel.component.smpp.SmppSplittingPolicy splittingPolicy)` You can specify a policy for handling long messages: ALLOW - the default, long messages are split to 140 bytes per message TRUNCATE - long messages are split and only the first fragment will be sent to the SMSC.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`systemId(String systemId)` The system id (username) for connecting to SMSC server.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`systemType(String systemType)` This parameter is used to categorize the type of ESME (External Short Message Entity) that is binding to the SMSC (max.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`transactionTimer(Integer transactionTimer)` Defines the maximum period of inactivity allowed after a transaction, after which an SMPP entity may assume that the session is no longer active.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`typeOfNumber(byte typeOfNumber)` Defines the type of number (TON) to be used in the SME.
`default SmppComponentBuilderFactory.SmppComponentBuilder`	`usingSSL(boolean usingSSL)` Whether using SSL with the smpps protocol.

Methods inherited from interface org.apache.camel.builder.component.ComponentBuilder
build, build, doSetProperty, register

- Method Detail
  - initialReconnectDelay
```
default SmppComponentBuilderFactory.SmppComponentBuilder initialReconnectDelay(long initialReconnectDelay)
```
    Defines the initial delay in milliseconds after the consumer/producer tries to reconnect to the SMSC, after the connection was lost. The option is a: <code>long</code> type. Default: 5000 Group: common
    
    Parameters:
    
    initialReconnectDelay - the value to set
    
    Returns:
    
    the dsl builder
  - maxReconnect
```
default SmppComponentBuilderFactory.SmppComponentBuilder maxReconnect(int maxReconnect)
```
    Defines the maximum number of attempts to reconnect to the SMSC, if SMSC returns a negative bind response. The option is a: <code>int</code> type. Default: 2147483647 Group: common
    
    Parameters:
    
    maxReconnect - the value to set
    
    Returns:
    
    the dsl builder
  - reconnectDelay
```
default SmppComponentBuilderFactory.SmppComponentBuilder reconnectDelay(long reconnectDelay)
```
    Defines the interval in milliseconds between the reconnect attempts, if the connection to the SMSC was lost and the previous was not succeed. The option is a: <code>long</code> type. Default: 5000 Group: common
    
    Parameters:
    
    reconnectDelay - the value to set
    
    Returns:
    
    the dsl builder
  - splittingPolicy
```
default SmppComponentBuilderFactory.SmppComponentBuilder splittingPolicy(org.apache.camel.component.smpp.SmppSplittingPolicy splittingPolicy)
```
    You can specify a policy for handling long messages: ALLOW - the default, long messages are split to 140 bytes per message TRUNCATE - long messages are split and only the first fragment will be sent to the SMSC. Some carriers drop subsequent fragments so this reduces load on the SMPP connection sending parts of a message that will never be delivered. REJECT - if a message would need to be split, it is rejected with an SMPP NegativeResponseException and the reason code signifying the message is too long. The option is a: <code>org.apache.camel.component.smpp.SmppSplittingPolicy</code> type. Default: ALLOW Group: common
    
    Parameters:
    
    splittingPolicy - the value to set
    
    Returns:
    
    the dsl builder
  - systemType
```
default SmppComponentBuilderFactory.SmppComponentBuilder systemType(String systemType)
```
    This parameter is used to categorize the type of ESME (External Short Message Entity) that is binding to the SMSC (max. 13 characters). The option is a: <code>java.lang.String</code> type. Group: common
    
    Parameters:
    
    systemType - the value to set
    
    Returns:
    
    the dsl builder
  - addressRange
```
default SmppComponentBuilderFactory.SmppComponentBuilder addressRange(String addressRange)
```
    You can specify the address range for the SmppConsumer as defined in section 5.2.7 of the SMPP 3.4 specification. The SmppConsumer will receive messages only from SMSC's which target an address (MSISDN or IP address) within this range. The option is a: <code>java.lang.String</code> type. Group: consumer
    
    Parameters:
    
    addressRange - the value to set
    
    Returns:
    
    the dsl builder
  - bridgeErrorHandler
```
default SmppComponentBuilderFactory.SmppComponentBuilder bridgeErrorHandler(boolean bridgeErrorHandler)
```
    Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. The option is a: <code>boolean</code> type. Default: false Group: consumer
    
    Parameters:
    
    bridgeErrorHandler - the value to set
    
    Returns:
    
    the dsl builder
  - destAddr
```
default SmppComponentBuilderFactory.SmppComponentBuilder destAddr(String destAddr)
```
    Defines the destination SME address. For mobile terminated messages, this is the directory number of the recipient MS. Only for SubmitSm, SubmitMulti, CancelSm and DataSm. The option is a: <code>java.lang.String</code> type. Default: 1717 Group: producer
    
    Parameters:
    
    destAddr - the value to set
    
    Returns:
    
    the dsl builder
  - destAddrNpi
```
default SmppComponentBuilderFactory.SmppComponentBuilder destAddrNpi(byte destAddrNpi)
```
    Defines the type of number (TON) to be used in the SME destination address parameters. Only for SubmitSm, SubmitMulti, CancelSm and DataSm. The following NPI values are defined: 0: Unknown 1: ISDN (E163/E164) 2: Data (X.121) 3: Telex (F.69) 6: Land Mobile (E.212) 8: National 9: Private 10: ERMES 13: Internet (IP) 18: WAP Client Id (to be defined by WAP Forum). The option is a: <code>byte</code> type. Group: producer
    
    Parameters:
    
    destAddrNpi - the value to set
    
    Returns:
    
    the dsl builder
  - destAddrTon
```
default SmppComponentBuilderFactory.SmppComponentBuilder destAddrTon(byte destAddrTon)
```
    Defines the type of number (TON) to be used in the SME destination address parameters. Only for SubmitSm, SubmitMulti, CancelSm and DataSm. The following TON values are defined: 0: Unknown 1: International 2: National 3: Network Specific 4: Subscriber Number 5: Alphanumeric 6: Abbreviated. The option is a: <code>byte</code> type. Group: producer
    
    Parameters:
    
    destAddrTon - the value to set
    
    Returns:
    
    the dsl builder
  - lazySessionCreation
```
default SmppComponentBuilderFactory.SmppComponentBuilder lazySessionCreation(boolean lazySessionCreation)
```
    Sessions can be lazily created to avoid exceptions, if the SMSC is not available when the Camel producer is started. Camel will check the in message headers 'CamelSmppSystemId' and 'CamelSmppPassword' of the first exchange. If they are present, Camel will use these data to connect to the SMSC. The option is a: <code>boolean</code> type. Default: false Group: producer
    
    Parameters:
    
    lazySessionCreation - the value to set
    
    Returns:
    
    the dsl builder
  - lazyStartProducer
```
default SmppComponentBuilderFactory.SmppComponentBuilder lazyStartProducer(boolean lazyStartProducer)
```
    Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel's routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. The option is a: <code>boolean</code> type. Default: false Group: producer
    
    Parameters:
    
    lazyStartProducer - the value to set
    
    Returns:
    
    the dsl builder
  - numberingPlanIndicator
```
default SmppComponentBuilderFactory.SmppComponentBuilder numberingPlanIndicator(byte numberingPlanIndicator)
```
    Defines the numeric plan indicator (NPI) to be used in the SME. The following NPI values are defined: 0: Unknown 1: ISDN (E163/E164) 2: Data (X.121) 3: Telex (F.69) 6: Land Mobile (E.212) 8: National 9: Private 10: ERMES 13: Internet (IP) 18: WAP Client Id (to be defined by WAP Forum). The option is a: <code>byte</code> type. Group: producer
    
    Parameters:
    
    numberingPlanIndicator - the value to set
    
    Returns:
    
    the dsl builder
  - priorityFlag
```
default SmppComponentBuilderFactory.SmppComponentBuilder priorityFlag(byte priorityFlag)
```
    Allows the originating SME to assign a priority level to the short message. Only for SubmitSm and SubmitMulti. Four Priority Levels are supported: 0: Level 0 (lowest) priority 1: Level 1 priority 2: Level 2 priority 3: Level 3 (highest) priority. The option is a: <code>byte</code> type. Group: producer
    
    Parameters:
    
    priorityFlag - the value to set
    
    Returns:
    
    the dsl builder
  - protocolId
```
default SmppComponentBuilderFactory.SmppComponentBuilder protocolId(byte protocolId)
```
    The protocol id. The option is a: <code>byte</code> type. Group: producer
    
    Parameters:
    
    protocolId - the value to set
    
    Returns:
    
    the dsl builder
  - registeredDelivery
```
default SmppComponentBuilderFactory.SmppComponentBuilder registeredDelivery(byte registeredDelivery)
```
    Is used to request an SMSC delivery receipt and/or SME originated acknowledgements. The following values are defined: 0: No SMSC delivery receipt requested. 1: SMSC delivery receipt requested where final delivery outcome is success or failure. 2: SMSC delivery receipt requested where the final delivery outcome is delivery failure. The option is a: <code>byte</code> type. Group: producer
    
    Parameters:
    
    registeredDelivery - the value to set
    
    Returns:
    
    the dsl builder
  - replaceIfPresentFlag
```
default SmppComponentBuilderFactory.SmppComponentBuilder replaceIfPresentFlag(byte replaceIfPresentFlag)
```
    Used to request the SMSC to replace a previously submitted message, that is still pending delivery. The SMSC will replace an existing message provided that the source address, destination address and service type match the same fields in the new message. The following replace if present flag values are defined: 0: Don't replace 1: Replace. The option is a: <code>byte</code> type. Group: producer
    
    Parameters:
    
    replaceIfPresentFlag - the value to set
    
    Returns:
    
    the dsl builder
  - serviceType
```
default SmppComponentBuilderFactory.SmppComponentBuilder serviceType(String serviceType)
```
    The service type parameter can be used to indicate the SMS Application service associated with the message. The following generic service_types are defined: CMT: Cellular Messaging CPT: Cellular Paging VMN: Voice Mail Notification VMA: Voice Mail Alerting WAP: Wireless Application Protocol USSD: Unstructured Supplementary Services Data. The option is a: <code>java.lang.String</code> type. Group: producer
    
    Parameters:
    
    serviceType - the value to set
    
    Returns:
    
    the dsl builder
  - sourceAddr
```
default SmppComponentBuilderFactory.SmppComponentBuilder sourceAddr(String sourceAddr)
```
    Defines the address of SME (Short Message Entity) which originated this message. The option is a: <code>java.lang.String</code> type. Default: 1616 Group: producer
    
    Parameters:
    
    sourceAddr - the value to set
    
    Returns:
    
    the dsl builder
  - sourceAddrNpi
```
default SmppComponentBuilderFactory.SmppComponentBuilder sourceAddrNpi(byte sourceAddrNpi)
```
    Defines the numeric plan indicator (NPI) to be used in the SME originator address parameters. The following NPI values are defined: 0: Unknown 1: ISDN (E163/E164) 2: Data (X.121) 3: Telex (F.69) 6: Land Mobile (E.212) 8: National 9: Private 10: ERMES 13: Internet (IP) 18: WAP Client Id (to be defined by WAP Forum). The option is a: <code>byte</code> type. Group: producer
    
    Parameters:
    
    sourceAddrNpi - the value to set
    
    Returns:
    
    the dsl builder
  - sourceAddrTon
```
default SmppComponentBuilderFactory.SmppComponentBuilder sourceAddrTon(byte sourceAddrTon)
```
    Defines the type of number (TON) to be used in the SME originator address parameters. The following TON values are defined: 0: Unknown 1: International 2: National 3: Network Specific 4: Subscriber Number 5: Alphanumeric 6: Abbreviated. The option is a: <code>byte</code> type. Group: producer
    
    Parameters:
    
    sourceAddrTon - the value to set
    
    Returns:
    
    the dsl builder
  - typeOfNumber
```
default SmppComponentBuilderFactory.SmppComponentBuilder typeOfNumber(byte typeOfNumber)
```
    Defines the type of number (TON) to be used in the SME. The following TON values are defined: 0: Unknown 1: International 2: National 3: Network Specific 4: Subscriber Number 5: Alphanumeric 6: Abbreviated. The option is a: <code>byte</code> type. Group: producer
    
    Parameters:
    
    typeOfNumber - the value to set
    
    Returns:
    
    the dsl builder
  - autowiredEnabled
```
default SmppComponentBuilderFactory.SmppComponentBuilder autowiredEnabled(boolean autowiredEnabled)
```
    Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc. The option is a: <code>boolean</code> type. Default: true Group: advanced
    
    Parameters:
    
    autowiredEnabled - the value to set
    
    Returns:
    
    the dsl builder
  - configuration
```
default SmppComponentBuilderFactory.SmppComponentBuilder configuration(org.apache.camel.component.smpp.SmppConfiguration configuration)
```
    To use the shared SmppConfiguration as configuration. The option is a: <code>org.apache.camel.component.smpp.SmppConfiguration</code> type. Group: advanced
    
    Parameters:
    
    configuration - the value to set
    
    Returns:
    
    the dsl builder
  - enquireLinkTimer
```
default SmppComponentBuilderFactory.SmppComponentBuilder enquireLinkTimer(Integer enquireLinkTimer)
```
    Defines the interval in milliseconds between the confidence checks. The confidence check is used to test the communication path between an ESME and an SMSC. The option is a: <code>java.lang.Integer</code> type. Default: 5000 Group: advanced
    
    Parameters:
    
    enquireLinkTimer - the value to set
    
    Returns:
    
    the dsl builder
  - sessionStateListener
```
default SmppComponentBuilderFactory.SmppComponentBuilder sessionStateListener(org.jsmpp.session.SessionStateListener sessionStateListener)
```
    You can refer to a org.jsmpp.session.SessionStateListener in the Registry to receive callbacks when the session state changed. The option is a: <code>org.jsmpp.session.SessionStateListener</code> type. Group: advanced
    
    Parameters:
    
    sessionStateListener - the value to set
    
    Returns:
    
    the dsl builder
  - transactionTimer
```
default SmppComponentBuilderFactory.SmppComponentBuilder transactionTimer(Integer transactionTimer)
```
    Defines the maximum period of inactivity allowed after a transaction, after which an SMPP entity may assume that the session is no longer active. This timer may be active on either communicating SMPP entity (i.e. SMSC or ESME). The option is a: <code>java.lang.Integer</code> type. Default: 10000 Group: advanced
    
    Parameters:
    
    transactionTimer - the value to set
    
    Returns:
    
    the dsl builder
  - alphabet
```
default SmppComponentBuilderFactory.SmppComponentBuilder alphabet(byte alphabet)
```
    Defines encoding of data according the SMPP 3.4 specification, section 5.2.19. 0: SMSC Default Alphabet 4: 8 bit Alphabet 8: UCS2 Alphabet. The option is a: <code>byte</code> type. Group: codec
    
    Parameters:
    
    alphabet - the value to set
    
    Returns:
    
    the dsl builder
  - dataCoding
```
default SmppComponentBuilderFactory.SmppComponentBuilder dataCoding(byte dataCoding)
```
    Defines the data coding according the SMPP 3.4 specification, section 5.2.19. Example data encodings are: 0: SMSC Default Alphabet 3: Latin 1 (ISO-8859-1) 4: Octet unspecified (8-bit binary) 8: UCS2 (ISO/IEC-10646) 13: Extended Kanji JIS(X 0212-1990). The option is a: <code>byte</code> type. Group: codec
    
    Parameters:
    
    dataCoding - the value to set
    
    Returns:
    
    the dsl builder
  - encoding
```
default SmppComponentBuilderFactory.SmppComponentBuilder encoding(String encoding)
```
    Defines the encoding scheme of the short message user data. Only for SubmitSm, ReplaceSm and SubmitMulti. The option is a: <code>java.lang.String</code> type. Default: ISO-8859-1 Group: codec
    
    Parameters:
    
    encoding - the value to set
    
    Returns:
    
    the dsl builder
  - httpProxyHost
```
default SmppComponentBuilderFactory.SmppComponentBuilder httpProxyHost(String httpProxyHost)
```
    If you need to tunnel SMPP through a HTTP proxy, set this attribute to the hostname or ip address of your HTTP proxy. The option is a: <code>java.lang.String</code> type. Group: proxy
    
    Parameters:
    
    httpProxyHost - the value to set
    
    Returns:
    
    the dsl builder
  - httpProxyPassword
```
default SmppComponentBuilderFactory.SmppComponentBuilder httpProxyPassword(String httpProxyPassword)
```
    If your HTTP proxy requires basic authentication, set this attribute to the password required for your HTTP proxy. The option is a: <code>java.lang.String</code> type. Group: proxy
    
    Parameters:
    
    httpProxyPassword - the value to set
    
    Returns:
    
    the dsl builder
  - httpProxyPort
```
default SmppComponentBuilderFactory.SmppComponentBuilder httpProxyPort(Integer httpProxyPort)
```
    If you need to tunnel SMPP through a HTTP proxy, set this attribute to the port of your HTTP proxy. The option is a: <code>java.lang.Integer</code> type. Default: 3128 Group: proxy
    
    Parameters:
    
    httpProxyPort - the value to set
    
    Returns:
    
    the dsl builder
  - httpProxyUsername
```
default SmppComponentBuilderFactory.SmppComponentBuilder httpProxyUsername(String httpProxyUsername)
```
    If your HTTP proxy requires basic authentication, set this attribute to the username required for your HTTP proxy. The option is a: <code>java.lang.String</code> type. Group: proxy
    
    Parameters:
    
    httpProxyUsername - the value to set
    
    Returns:
    
    the dsl builder
  - proxyHeaders
```
default SmppComponentBuilderFactory.SmppComponentBuilder proxyHeaders(Map<String,String> proxyHeaders)
```
    These headers will be passed to the proxy server while establishing the connection. The option is a: <code>java.util.Map<java.lang.String, java.lang.String></code> type. Group: proxy
    
    Parameters:
    
    proxyHeaders - the value to set
    
    Returns:
    
    the dsl builder
  - password
```
default SmppComponentBuilderFactory.SmppComponentBuilder password(String password)
```
    The password for connecting to SMSC server. The option is a: <code>java.lang.String</code> type. Group: security
    
    Parameters:
    
    password - the value to set
    
    Returns:
    
    the dsl builder
  - systemId
```
default SmppComponentBuilderFactory.SmppComponentBuilder systemId(String systemId)
```
    The system id (username) for connecting to SMSC server. The option is a: <code>java.lang.String</code> type. Default: smppclient Group: security
    
    Parameters:
    
    systemId - the value to set
    
    Returns:
    
    the dsl builder
  - usingSSL
```
default SmppComponentBuilderFactory.SmppComponentBuilder usingSSL(boolean usingSSL)
```
    Whether using SSL with the smpps protocol. The option is a: <code>boolean</code> type. Default: false Group: security
    
    Parameters:
    
    usingSSL - the value to set
    
    Returns:
    
    the dsl builder

Interface SmppComponentBuilderFactory.SmppComponentBuilder

Method Summary

Methods inherited from interface org.apache.camel.builder.component.ComponentBuilder

Method Detail

initialReconnectDelay

maxReconnect

reconnectDelay

splittingPolicy

systemType

addressRange

bridgeErrorHandler

destAddr

destAddrNpi

destAddrTon

lazySessionCreation

lazyStartProducer

numberingPlanIndicator

priorityFlag

protocolId

registeredDelivery

replaceIfPresentFlag

serviceType

sourceAddr

sourceAddrNpi

sourceAddrTon

typeOfNumber

autowiredEnabled

configuration

enquireLinkTimer

sessionStateListener

transactionTimer

alphabet

dataCoding

encoding

httpProxyHost

httpProxyPassword

httpProxyPort

httpProxyUsername

proxyHeaders

password

systemId

usingSSL