ServiceContainerConfiguration (RHQ Enterprise Agent-Server Communications Layer 4.10.0 API)

java.lang.Object
- org.rhq.enterprise.communications.ServiceContainerConfiguration

```
public class ServiceContainerConfiguration
extends Object
```
Just provides some convienence methods to extract the service container configuration properties. These are remoting server configuration properties that are common on both the RHQ Server and RHQ Agent used to configure the communications services.

Author:

John Mazzitelli

Constructor Summary

Constructors
Constructor and Description

ServiceContainerConfiguration(Preferences prefs)
Wraps a preferences object in this instance.

Constructors
Constructor and Description
`ServiceContainerConfiguration(Preferences prefs)` Wraps a preferences object in this instance.

Method Summary

Methods
Modifier and Type	Method and Description
`CommandAuthenticator`	`getCommandAuthenticator()` Returns an implementation of the configured `CommandAuthenticator` that should be used to authenticate incoming commands.
`String`	`getConnectorBindAddress()` Returns the connector's bind address.
`int`	`getConnectorBindPort()` Returns the connector's bind port.
`long`	`getConnectorLeasePeriod()` Returns the connector's lease period, in milliseconds.
`String`	`getConnectorRemoteEndpoint()` This is a convienence method that builds a full remote endpoint string that combines `getConnectorTransport()`, `getConnectorBindAddress()`, `getConnectorBindPort()`, `getConnectorTransportParams()` and `getConnectorRHQType()`.
`String`	`getConnectorRHQType()` Returns the connector's RHQ type (indicating if the remoting server resides in the RHQ Server or RHQ Agent).
`String`	`getConnectorSecurityClientAuthMode()` Returns the client authentication mode.
`String`	`getConnectorSecurityKeystoreAlgorithm()` Returns the algorithm used to manage the keys in the keystore.
`String`	`getConnectorSecurityKeystoreAlias()` Returns the key alias of the key in the keystore.
`String`	`getConnectorSecurityKeystoreFile()` Returns the path to the keystore file.
`String`	`getConnectorSecurityKeystoreKeyPassword()` Returns the password to gain access to the key in the keystore.
`String`	`getConnectorSecurityKeystorePassword()` Returns the password to the keystore file itself.
`String`	`getConnectorSecurityKeystoreType()` Returns the type of keystore.
`String`	`getConnectorSecuritySocketProtocol()` Returns the protocol used over the secure socket.
`String`	`getConnectorSecurityTruststoreAlgorithm()` Returns the algorithm used to manage the keys in the truststore.
`String`	`getConnectorSecurityTruststoreFile()` Returns the path to the truststore file.
`String`	`getConnectorSecurityTruststorePassword()` Returns the password of the truststore file itself.
`String`	`getConnectorSecurityTruststoreType()` Returns the type of the truststore file.
`String`	`getConnectorTransport()` Returns the connector's transport type (socket, http, etc).
`String`	`getConnectorTransportParams()` Returns the connector's transport parameters which are used to further customize the connector and its transport subsystem.
`File`	`getDataDirectory()` Returns the data directory where all internally persisted data can be written to.
`String`	`getDataDirectoryIfDefined()` This will return the data directory string as found in the preferences.
`int`	`getGlobalConcurrencyLimit()` Returns the global concurrency limit on the number of commands that are allowed to be received concurrently (i.e.
`String`	`getMBeanServerName()` Returns the name of the MBeanServer that will be created to house all the services.
`String`	`getMulticastDetectorBindAddress()` Returns the multicast detector's bind address which is what the network interface binds to.
`long`	`getMulticastDetectorDefaultTimeDelay()` Returns the multicast detector's default time delay.
`long`	`getMulticastDetectorHeartbeatTimeDelay()` Returns the multicast detector's heartbeat time delay.
`String`	`getMulticastDetectorMulticastAddress()` Returns the multicast detector's multicast address used for network registry messages (servers coming and going).
`int`	`getMulticastDetectorPort()` Returns the multicast detector's port.
`Preferences`	`getPreferences()` Returns the raw preferences containing the service container configuration.
`long`	`getRemoteStreamMaxIdleTime()` Returns the maximum amount of milliseconds a remote `output` or `input` stream server-side component hosted in a `RemoteOutputStreamCommandService` or `RemoteInputStreamCommandService` is allowed to be idle before it is automatically closed and removed.
`int`	`getServiceContainerConfigurationVersion()` Returns the version of the configuration schema.
`String`	`getStartupCommandServices()` Returns the command services that are to be automatically deployed when the services are started up.
`String`	`getStartupRemotePojos()` Returns the definitions of the POJOs that are to be automatically deployed as remote services at start up.
`boolean`	`isCommandServiceDirectoryDynamicDiscoveryEnabled()` Returns the flag to indicate if the command service directory has been enabled to perform dynamic discovery of new command services that are added to (or old services removed from) the system after the initial startup discovery.
`boolean`	`isCommunicationsDisabled()` Returns `true` if the communication services should be disabled, `false` if they should be created normally.
`boolean`	`isMulticastDetectorEnabled()` Returns the flag to indicate if the multicast detector should be enabled or not.
`void`	`tagWithServiceContainerConfigurationVersion()` This tags the existing preferences by setting the configuration schema version preference appropriately.
`String`	`toString()`

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait

- Constructor Detail
  - ServiceContainerConfiguration
```
public ServiceContainerConfiguration(Preferences prefs)
```
    Wraps a preferences object in this instance.
    
    Parameters:
    prefs - the service container configuration preferences
    
    Throws:
    
    IllegalArgumentException - if prefs is null
- Method Detail
  - getPreferences
```
public Preferences getPreferences()
```
    Returns the raw preferences containing the service container configuration.
    
    Returns:
    the configuration preferences
  - getServiceContainerConfigurationVersion
```
public int getServiceContainerConfigurationVersion()
```
    Returns the version of the configuration schema.
    
    Returns:
    configuration version; if the configuration isn't versioned, 0 is returned
  - tagWithServiceContainerConfigurationVersion
```
public void tagWithServiceContainerConfigurationVersion()
```
    This tags the existing preferences by setting the configuration schema version preference appropriately.
  - getGlobalConcurrencyLimit
```
public int getGlobalConcurrencyLimit()
```
    Returns the global concurrency limit on the number of commands that are allowed to be received concurrently (i.e. the counting semaphore name as known to the ConcurrencyManager).
    If this returns a value of 0 or less, there will be no global limit on the number of messages that can be received and processed concurrently.
    
    Returns:
    the global concurrency limit value
  - getMBeanServerName
```
public String getMBeanServerName()
```
    Returns the name of the MBeanServer that will be created to house all the services. This is actually the default domain name of the MBeanServer. If an MBeanServer already exists and is registered with this default domain name, it will be used to house the communications services. If the MBeanServer name does not exist in the configuration, null will be returned, which indicates that the JVM's platform MBeanServer should be used.
    
    Returns:
    the MBeanServer name
  - isCommunicationsDisabled
```
public boolean isCommunicationsDisabled()
```
    Returns true if the communication services should be disabled, false if they should be created normally. It is rare that you would want to configure this setting to be true.
    
    Returns:
    the flag to indicate if communications should be disabled
  - getDataDirectory
```
public File getDataDirectory()
```
    Returns the data directory where all internally persisted data can be written to. If the data directory does not exist, it will be created.
    Because this does alittle extra work, it may not be suitable to call if you just want to get the value of the data directory or if you just want to know if its defined or not. In those instances, use getDataDirectoryIfDefined() instead.
    
    Returns:
    the data directory
  - getDataDirectoryIfDefined
```
public String getDataDirectoryIfDefined()
```
    This will return the data directory string as found in the preferences. If the data directory is not defined in the preferences, null is returned.
    
    Returns:
    the data directory string as defined in the preferences or null if it is not defined
    See Also:
    getDataDirectory()
  - isMulticastDetectorEnabled
```
public boolean isMulticastDetectorEnabled()
```
    Returns the flag to indicate if the multicast detector should be enabled or not.
    
    Returns:
    the multicast detector enable flag (true means the detector should be enabled)
  - getMulticastDetectorMulticastAddress
```
public String getMulticastDetectorMulticastAddress()
```
    Returns the multicast detector's multicast address used for network registry messages (servers coming and going). This is the IP of the multicast group that the detector will join.
    
    Returns:
    the multicast detector multicast address (null if not set in the preferences)
  - getMulticastDetectorBindAddress
```
public String getMulticastDetectorBindAddress()
```
    Returns the multicast detector's bind address which is what the network interface binds to.
    
    Returns:
    the multicast detector bind address (null if not set in the preferences)
  - getMulticastDetectorDefaultTimeDelay
```
public long getMulticastDetectorDefaultTimeDelay()
```
    Returns the multicast detector's default time delay. This is the amount of time, in milliseconds, which can elapse without receiving a detection event before suspecting that a server is dead and performing an explicit invocation on it to verify it is alive. If this invocation, or ping, fails, the server will be removed from the network registry. This should be greater than getMulticastDetectorHeartbeatTimeDelay().
    
    Returns:
    the multicast detector default time delay (Long.MIN_VALUE if not set in the preferences)
  - getMulticastDetectorHeartbeatTimeDelay
```
public long getMulticastDetectorHeartbeatTimeDelay()
```
    Returns the multicast detector's heartbeat time delay. This is the amount of time to wait between sending (and sometimes receiving) detection messages. This should be less than getMulticastDetectorDefaultTimeDelay() .
    
    Returns:
    the multicast detector heartbeat time delay (Long.MIN_VALUE if not set in the preferences)
  - getMulticastDetectorPort
```
public int getMulticastDetectorPort()
```
    Returns the multicast detector's port.
    
    Returns:
    the multicast detector port (Integer.MIN_VALUE if not set in the preferences)
  - getConnectorRHQType
```
public String getConnectorRHQType()
```
    Returns the connector's RHQ type (indicating if the remoting server resides in the RHQ Server or RHQ Agent).
    
    Returns:
    the RHQ type
  - getConnectorTransport
```
public String getConnectorTransport()
```
    Returns the connector's transport type (socket, http, etc).
    
    Returns:
    the connector transport type
  - getConnectorBindAddress
```
public String getConnectorBindAddress()
```
    Returns the connector's bind address.
    
    Returns:
    the connector bind address
  - getConnectorBindPort
```
public int getConnectorBindPort()
```
    Returns the connector's bind port.
    
    Returns:
    the connector's bind port
  - getConnectorTransportParams
```
public String getConnectorTransportParams()
```
    Returns the connector's transport parameters which are used to further customize the connector and its transport subsystem.
    
    Returns:
    the connector transport parameters
  - getConnectorRemoteEndpoint
```
public String getConnectorRemoteEndpoint()
```
    This is a convienence method that builds a full remote endpoint string that combines getConnectorTransport(), getConnectorBindAddress(), getConnectorBindPort(), getConnectorTransportParams() and getConnectorRHQType().
    
    Returns:
    a remote endpoint string that can be used by remote clients to connect to the connector.
  - getConnectorLeasePeriod
```
public long getConnectorLeasePeriod()
```
    Returns the connector's lease period, in milliseconds. When this period is greater than 0, it enables the capability for the connector to detect when a client is no longer available. This is done by estabilishing a lease with the remoting clients.
    
    Returns:
    the connector's lease period (Long.MIN_VALUE if not set in the preferences)
  - getConnectorSecuritySocketProtocol
```
public String getConnectorSecuritySocketProtocol()
```
    Returns the protocol used over the secure socket.
    
    Returns:
    protocol name
  - getConnectorSecurityClientAuthMode
```
public String getConnectorSecurityClientAuthMode()
```
    Returns the client authentication mode. It is either:}
    - SSLSocketBuilder.CLIENT_AUTH_MODE_NONE - clients are not authenticated
    - SSLSocketBuilder.CLIENT_AUTH_MODE_WANT - clients are authenticated if they provide a cert; if they do not, anonymous connections are allowed
    - SSLSocketBuilder.CLIENT_AUTH_MODE_NEED - clients must supply a cert and they must be authenticated
    The default is SSLSocketBuilder.CLIENT_AUTH_MODE_NONE - that will be returned if the client auth mode was not found in the configuration. Note: To support Tomcat syntax, the client authentication mode value is allowed to be "true" or "false". "true" maps to SSLSocketBuilder.CLIENT_AUTH_MODE_NEED, "false" maps to SSLSocketBuilder.CLIENT_AUTH_MODE_NONE.
    Returns:
    the client authentication mode
  - getConnectorSecurityKeystoreFile
```
public String getConnectorSecurityKeystoreFile()
```
    Returns the path to the keystore file. This returns a String as opposed to File since some underlying remoting code may allow for this filepath to be relative to a jar inside the classloader.
    
    Returns:
    keystore file path
  - getConnectorSecurityKeystoreAlgorithm
```
public String getConnectorSecurityKeystoreAlgorithm()
```
    Returns the algorithm used to manage the keys in the keystore.
    
    Returns:
    key manager algorithm
  - getConnectorSecurityKeystoreType
```
public String getConnectorSecurityKeystoreType()
```
    Returns the type of keystore.
    
    Returns:
    keystore type
  - getConnectorSecurityKeystorePassword
```
public String getConnectorSecurityKeystorePassword()
```
    Returns the password to the keystore file itself.
    
    Returns:
    keystore password
  - getConnectorSecurityKeystoreKeyPassword
```
public String getConnectorSecurityKeystoreKeyPassword()
```
    Returns the password to gain access to the key in the keystore. If no key password is configured, this returns the keystore password.
    
    Returns:
    password to the key
  - getConnectorSecurityKeystoreAlias
```
public String getConnectorSecurityKeystoreAlias()
```
    Returns the key alias of the key in the keystore.
    
    Returns:
    key alias name
  - getConnectorSecurityTruststoreFile
```
public String getConnectorSecurityTruststoreFile()
```
    Returns the path to the truststore file. This returns a String as opposed to File since some underlying remoting code may allow for this filepath to be relative to a jar inside the classloader.
    
    Returns:
    truststore file path
  - getConnectorSecurityTruststoreAlgorithm
```
public String getConnectorSecurityTruststoreAlgorithm()
```
    Returns the algorithm used to manage the keys in the truststore.
    
    Returns:
    algorithm name
  - getConnectorSecurityTruststoreType
```
public String getConnectorSecurityTruststoreType()
```
    Returns the type of the truststore file.
    
    Returns:
    truststore file type
  - getConnectorSecurityTruststorePassword
```
public String getConnectorSecurityTruststorePassword()
```
    Returns the password of the truststore file itself.
    
    Returns:
    truststore file password
  - getStartupCommandServices
```
public String getStartupCommandServices()
```
    Returns the command services that are to be automatically deployed when the services are started up.
    
    Returns:
    the set of command services to be automatically deployed at startup
  - getStartupRemotePojos
```
public String getStartupRemotePojos()
```
    Returns the definitions of the POJOs that are to be automatically deployed as remote services at start up.
    
    Returns:
    the set of POJOs to remote at startup
  - getRemoteStreamMaxIdleTime
```
public long getRemoteStreamMaxIdleTime()
```
    Returns the maximum amount of milliseconds a remote output or input stream server-side component hosted in a RemoteOutputStreamCommandService or RemoteInputStreamCommandService is allowed to be idle before it is automatically closed and removed. This means that a client must attempt to access the remote stream every X milliseconds (where X is the value this method returns) or that stream will no longer be available. Note that this does not mean a client must read/write the entire stream in this amount of time, it only means a client must make a request on the stream every X milliseconds (be it to read or write a byte, mark it, see how many bytes are available, etc).
    
    Returns:
    the max idle time in milliseconds
  - isCommandServiceDirectoryDynamicDiscoveryEnabled
```
public boolean isCommandServiceDirectoryDynamicDiscoveryEnabled()
```
    Returns the flag to indicate if the command service directory has been enabled to perform dynamic discovery of new command services that are added to (or old services removed from) the system after the initial startup discovery.
    
    Returns:
    true if dynamic discovery of command services is enabled; false if the initial set of getStartupCommandServices() are the only ones that will be enabled during the lifetime of the service container
  - getCommandAuthenticator
```
public CommandAuthenticator getCommandAuthenticator()
                                             throws Exception
```
    Returns an implementation of the configured CommandAuthenticator that should be used to authenticate incoming commands.
    
    Returns:
    command authenticator object instance or null if no authenticator is configured
    
    Throws:
    
    Exception - if failed to instantiate the configured class name
  - toString
```
public String toString()
```
    Overrides:
    
    toString in class Object
    
    See Also:
    Object.toString()

Class ServiceContainerConfiguration

Constructor Summary

Method Summary

Methods inherited from class java.lang.Object

Constructor Detail

ServiceContainerConfiguration

Method Detail

getPreferences

getServiceContainerConfigurationVersion

tagWithServiceContainerConfigurationVersion

getGlobalConcurrencyLimit

getMBeanServerName

isCommunicationsDisabled

getDataDirectory

getDataDirectoryIfDefined

isMulticastDetectorEnabled

getMulticastDetectorMulticastAddress

getMulticastDetectorBindAddress

getMulticastDetectorDefaultTimeDelay

getMulticastDetectorHeartbeatTimeDelay

getMulticastDetectorPort

getConnectorRHQType

getConnectorTransport

getConnectorBindAddress

getConnectorBindPort

getConnectorTransportParams

getConnectorRemoteEndpoint

getConnectorLeasePeriod

getConnectorSecuritySocketProtocol

getConnectorSecurityClientAuthMode

getConnectorSecurityKeystoreFile

getConnectorSecurityKeystoreAlgorithm

getConnectorSecurityKeystoreType

getConnectorSecurityKeystorePassword

getConnectorSecurityKeystoreKeyPassword

getConnectorSecurityKeystoreAlias

getConnectorSecurityTruststoreFile

getConnectorSecurityTruststoreAlgorithm

getConnectorSecurityTruststoreType

getConnectorSecurityTruststorePassword

getStartupCommandServices

getStartupRemotePojos

getRemoteStreamMaxIdleTime

isCommandServiceDirectoryDynamicDiscoveryEnabled

getCommandAuthenticator

toString