Value Members

1.  final def !=(arg0: Any): Boolean

   Definition Classes

   AnyRef → Any

2.  final def ##(): Int

   Definition Classes

   AnyRef → Any

3.  final def ==(arg0: Any): Boolean

   Definition Classes

   AnyRef → Any

4.  final val MaxValue: NegZLong

   The largest value representable as a non-positive Long, which is NegZLong(0L).

5.  final val MinValue: NegZLong

   The smallest value representable as a positive Long, which is NegZLong(-9223372036854775808).

6.  implicit macro def apply(value: Long): NegZLong

   A factory method, implemented via a macro, that produces a NegZLong if passed a valid Long literal, otherwise a compile time error.

   A factory method, implemented via a macro, that produces a NegZLong if passed a valid Long literal, otherwise a compile time error.

   The macro that implements this method will inspect the specified Long expression at compile time. If the expression is a non-positive Long literal, it will return a NegZLong representing that value. Otherwise, the passed Long expression is either a literal that is not non-positive, or is not a literal, so this method will give a compiler error.

   This factory method differs from the from factory method in that this method is implemented via a macro that inspects Long literals at compile time, whereas from inspects Long values at run time.

   value

   the Long literal expression to inspect at compile time, and if non-positive, to return wrapped in a NegZLong at run time.

   returns

   the specified, valid Long literal value wrapped in a NegZLong. (If the specified expression is not a valid Long literal, the invocation of this method will not compile.)

7.  final def asInstanceOf[T0]: T0

   Definition Classes

   Any

8.  def clone(): AnyRef

   Attributes

   protected[lang]

   Definition Classes

   AnyRef

   Annotations

   @throws( ... ) @native()

9.  def ensuringValid(value: Long): NegZLong

   A factory/assertion method that produces an NegZLong given a valid Long value, or throws AssertionError, if given an invalid Long value.

   A factory/assertion method that produces an NegZLong given a valid Long value, or throws AssertionError, if given an invalid Long value.

   Note: you should use this method only when you are convinced that it will always succeed, i.e., never throw an exception. It is good practice to add a comment near the invocation of this method indicating why you think it will always succeed to document your reasoning. If you are not sure an ensuringValid call will always succeed, you should use one of the other factory or validation methods provided on this object instead: isValid, tryingValid, passOrElse, goodOrElse, or rightOrElse.

   This method will inspect the passed Long value and if it is a non-positive Long, it will return a NegZLong representing that value. Otherwise, the passed Long value is not non-positive, so this method will throw AssertionError.

   This factory method differs from the apply factory method in that apply is implemented via a macro that inspects Long literals at compile time, whereas from inspects Long values at run time. It differs from a vanilla assert or ensuring call in that you get something you didn't already have if the assertion succeeds: a type that promises a Long is positive.

   value

   the Long to inspect, and if non-positive, return wrapped in a NegZLong.

   returns

   the specified Long value wrapped in a NegZLong, if it is non-positive, else throws AssertionError.

   Exceptions thrown

   AssertionError if the passed value is not non-positive

10.  final def eq(arg0: AnyRef): Boolean

    Definition Classes

    AnyRef

11.  def equals(arg0: Any): Boolean

    Definition Classes

    AnyRef → Any

12.  def finalize(): Unit

    Attributes

    protected[lang]

    Definition Classes

    AnyRef

    Annotations

    @throws( classOf[java.lang.Throwable] )

13.  def from(value: Long): Option[NegZLong]

    A factory method that produces an Option[NegZLong] given a Long value.

    A factory method that produces an Option[NegZLong] given a Long value.

    This method will inspect the passed Long value and if it is a non-positive Long, it will return a NegZLong representing that value, wrapped in a Some. Otherwise, the passed Long value is not non-positive, so this method will return None.

    This factory method differs from the apply factory method in that apply is implemented via a macro that inspects Long literals at compile time, whereas from inspects Long values at run time.

    value

    the Long to inspect, and if non-positive, return wrapped in a Some[NegZLong].

    returns

    the specified Long value wrapped in a Some[NegZLong], if it is non-positive, else None.

14.  def fromOrElse(value: Long, default: ⇒ NegZLong): NegZLong

    A factory method that produces a NegZLong given a Long value and a default NegZLong.

    A factory method that produces a NegZLong given a Long value and a default NegZLong.

    This method will inspect the passed Long value and if it is a non-positive Long, it will return a NegZLong representing that value. Otherwise, the passed Long value is not non-positive, so this method will return the passed default value.

    This factory method differs from the apply factory method in that apply is implemented via a macro that inspects Long literals at compile time, whereas from inspects Long values at run time.

    value

    the Long to inspect, and if non-positive, return.

    default

    the NegZLong to return if the passed Long value is not non-positive.

    returns

    the specified Long value wrapped in a NegZLong, if it is non-positive, else the default NegZLong value.

15.  final def getClass(): Class[_]

    Definition Classes

    AnyRef → Any

    Annotations

    @native()

16.  def goodOrElse[B](value: Long)(f: (Long) ⇒ B): Or[NegZLong, B]

    A factory/validation method that produces a NegZLong, wrapped in a Good, given a valid Long value, or if the given Long is invalid, an error value of type B produced by passing the given invalid Long value to the given function f, wrapped in a Bad.

    A factory/validation method that produces a NegZLong, wrapped in a Good, given a valid Long value, or if the given Long is invalid, an error value of type B produced by passing the given invalid Long value to the given function f, wrapped in a Bad.

    This method will inspect the passed Long value and if it is a non-positive Long, it will return a NegZLong representing that value, wrapped in a Good. Otherwise, the passed Long value is not non-positive, so this method will return a result of type B obtained by passing the invalid Long value to the given function f, wrapped in a Bad.

    This factory method differs from the apply factory method in that apply is implemented via a macro that inspects Long literals at compile time, whereas this method inspects Long values at run time.

    value

    the Long to inspect, and if non-positive, return wrapped in a Good(NegZLong).

    returns

    the specified Long value wrapped in a Good(NegZLong), if it is non-positive, else a Bad(f(value)).

17.  def hashCode(): Int

    Definition Classes

    AnyRef → Any

    Annotations

    @native()

18.  final def isInstanceOf[T0]: Boolean

    Definition Classes

    Any

19.  def isValid(value: Long): Boolean

    A predicate method that returns true if a given Long value is non-positive.

    A predicate method that returns true if a given Long value is non-positive.

    value

    the Long to inspect, and if non-positive, return true.

    returns

    true if the specified Long is non-positive, else false.

20.  final def ne(arg0: AnyRef): Boolean

    Definition Classes

    AnyRef

21.  final def notify(): Unit

    Definition Classes

    AnyRef

    Annotations

    @native()

22.  final def notifyAll(): Unit

    Definition Classes

    AnyRef

    Annotations

    @native()

23.  implicit val ordering: Ordering[NegZLong]

    Implicit Ordering instance.

24.  def passOrElse[E](value: Long)(f: (Long) ⇒ E): Validation[E]

    A validation method that produces a Pass given a valid Long value, or an error value of type E produced by passing the given invalid Int value to the given function f, wrapped in a Fail.

    A validation method that produces a Pass given a valid Long value, or an error value of type E produced by passing the given invalid Int value to the given function f, wrapped in a Fail.

    This method will inspect the passed Long value and if it is a non-positive Long, it will return a Pass. Otherwise, the passed Long value is non-positive, so this method will return a result of type E obtained by passing the invalid Long value to the given function f, wrapped in a Fail.

    This factory method differs from the apply factory method in that apply is implemented via a macro that inspects Long literals at compile time, whereas this method inspects Long values at run time.

    value

    the Long to validate that it is non-positive.

    returns

    a Pass if the specified Long value is non-positive, else a Fail containing an error value produced by passing the specified Long to the given function f.

25.  def rightOrElse[L](value: Long)(f: (Long) ⇒ L): Either[L, NegZLong]

    A factory/validation method that produces a NegZLong, wrapped in a Right, given a valid Int value, or if the given Int is invalid, an error value of type L produced by passing the given invalid Int value to the given function f, wrapped in a Left.

    A factory/validation method that produces a NegZLong, wrapped in a Right, given a valid Int value, or if the given Int is invalid, an error value of type L produced by passing the given invalid Int value to the given function f, wrapped in a Left.

    This method will inspect the passed Int value and if it is a non-positive Int, it will return a NegZLong representing that value, wrapped in a Right. Otherwise, the passed Int value is not non-positive, so this method will return a result of type L obtained by passing the invalid Int value to the given function f, wrapped in a Left.

    This factory method differs from the apply factory method in that apply is implemented via a macro that inspects Int literals at compile time, whereas this method inspects Int values at run time.

    value

    the Int to inspect, and if non-positive, return wrapped in a Right(NegZLong).

    returns

    the specified Int value wrapped in a Right(NegZLong), if it is non-positive, else a Left(f(value)).

26.  final def synchronized[T0](arg0: ⇒ T0): T0

    Definition Classes

    AnyRef

27.  def toString(): String

    Definition Classes

    AnyRef → Any

28.  def tryingValid(value: Long): Try[NegZLong]

    A factory/validation method that produces a NegZLong, wrapped in a Success, given a valid Long value, or if the given Long is invalid, an AssertionError, wrapped in a Failure.

    A factory/validation method that produces a NegZLong, wrapped in a Success, given a valid Long value, or if the given Long is invalid, an AssertionError, wrapped in a Failure.

    This method will inspect the passed Long value and if it is a non-positive Long, it will return a NegZLong representing that value, wrapped in a Success. Otherwise, the passed Long value is not non-positive, so this method will return an AssertionError, wrapped in a Failure.

    This factory method differs from the apply factory method in that apply is implemented via a macro that inspects Long literals at compile time, whereas this method inspects Long values at run time.

    value

    the Long to inspect, and if non-positive, return wrapped in a Success(NegZLong).

    returns

    the specified Long value wrapped in a Success(NegZLong), if it is non-positive, else a Failure(AssertionError).

29.  final def wait(): Unit

    Definition Classes

    AnyRef

    Annotations

    @throws( ... )

30.  final def wait(arg0: Long, arg1: Int): Unit

    Definition Classes

    AnyRef

    Annotations

    @throws( ... )

31.  final def wait(arg0: Long): Unit

    Definition Classes

    AnyRef

    Annotations

    @throws( ... ) @native()

32.  implicit def widenToDouble(pos: NegZLong): Double

    Implicit widening conversion from NegZLong to Double.

    Implicit widening conversion from NegZLong to Double.

    pos

    the NegZLong to widen

    returns

    the Long value underlying the specified NegZLong, widened to Double.

33.  implicit def widenToFloat(pos: NegZLong): Float

    Implicit widening conversion from NegZLong to Float.

    Implicit widening conversion from NegZLong to Float.

    pos

    the NegZLong to widen

    returns

    the Long value underlying the specified NegZLong, widened to Float.

34.  implicit def widenToLong(pos: NegZLong): Long

    Implicit widening conversion from NegZLong to Long.

    Implicit widening conversion from NegZLong to Long.

    pos

    the NegZLong to widen

    returns

    the Long value underlying the specified NegZLong.

35.  implicit def widenToNegZDouble(pos: NegZLong): NegZDouble

    Implicit widening conversion from NegZLong to NegZDouble.

    Implicit widening conversion from NegZLong to NegZDouble.

    pos

    the NegZLong to widen

    returns

    the Long value underlying the specified NegZLong, widened to Double and wrapped in a NegZDouble.

36.  implicit def widenToNegZFloat(pos: NegZLong): NegZFloat

    Implicit widening conversion from NegZLong to NegZFloat.

    Implicit widening conversion from NegZLong to NegZFloat.

    pos

    the NegZLong to widen

    returns

    the Long value underlying the specified NegZLong, widened to Float and wrapped in a NegZFloat.