public abstract class FloatBuffer extends Buffer implements Comparable<FloatBuffer>
A float buffer can be created in either of the following ways:
Allocate a new float array and create a buffer
based on it;Wrap an existing float array to create a new
buffer;ByteBuffer.asFloatBuffer
to create a float buffer based on a byte buffer.| Modifier and Type | Method and Description |
|---|---|
static FloatBuffer |
allocate(int capacity)
Creates a float buffer based on a newly allocated float array.
|
float[] |
array()
Returns the float array which this buffer is based on, if there is one.
|
int |
arrayOffset()
Returns the offset of the float array which this buffer is based on, if
there is one.
|
abstract FloatBuffer |
asReadOnlyBuffer()
Returns a read-only buffer that shares its content with this buffer.
|
abstract FloatBuffer |
compact()
Compacts this float buffer.
|
int |
compareTo(FloatBuffer otherBuffer)
Compare the remaining floats of this buffer to another float buffer's
remaining floats.
|
abstract FloatBuffer |
duplicate()
Returns a duplicated buffer that shares its content with this buffer.
|
boolean |
equals(Object other)
Checks whether this float buffer is equal to another object.
|
abstract float |
get()
Returns the float at the current position and increases the position by
1.
|
FloatBuffer |
get(float[] dest)
Reads floats from the current position into the specified float array and
increases the position by the number of floats read.
|
FloatBuffer |
get(float[] dest,
int off,
int len)
Reads floats from the current position into the specified float array,
starting from the specified offset, and increases the position by the
number of floats read.
|
abstract float |
get(int index)
Returns a float at the specified index; the position is not changed.
|
boolean |
hasArray()
Indicates whether this buffer is based on a float array and is
read/write.
|
int |
hashCode()
Calculates this buffer's hash code from the remaining chars.
|
abstract boolean |
isDirect()
Indicates whether this buffer is direct.
|
abstract ByteOrder |
order()
Returns the byte order used by this buffer when converting floats from/to
bytes.
|
abstract FloatBuffer |
put(float f)
Writes the given float to the current position and increases the position
by 1.
|
FloatBuffer |
put(float[] src)
Writes floats from the given float array to the current position and
increases the position by the number of floats written.
|
FloatBuffer |
put(float[] src,
int off,
int len)
Writes floats from the given float array, starting from the specified
offset, to the current position and increases the position by the number
of floats written.
|
FloatBuffer |
put(FloatBuffer src)
Writes all the remaining floats of the
src float buffer to this
buffer's current position, and increases both buffers' position by the
number of floats copied. |
abstract FloatBuffer |
put(int index,
float f)
Writes a float to the specified index of this buffer; the position is not
changed.
|
abstract FloatBuffer |
slice()
Returns a sliced buffer that shares its content with this buffer.
|
String |
toString()
Returns a string representing the state of this float buffer.
|
static FloatBuffer |
wrap(float[] array)
Creates a new float buffer by wrapping the given float array.
|
static FloatBuffer |
wrap(float[] array,
int start,
int len)
Creates a new float buffer by wrapping the given float array.
|
public static FloatBuffer allocate(int capacity)
capacity - the capacity of the new buffer.IllegalArgumentException - if capacity is less than zero.public static FloatBuffer wrap(float[] array)
Calling this method has the same effect as
wrap(array, 0, array.length).
array - the float array which the new buffer will be based on.public static FloatBuffer wrap(float[] array, int start, int len)
The new buffer's position will be start, limit will be
start + len, capacity will be the length of the array.
array - the float array which the new buffer will be based on.start - the start index, must not be negative and not greater than
array.length.len - the length, must not be negative and not greater than
array.length - start.IndexOutOfBoundsException - if either start or len is invalid.NullPointerException - if array is null.public final float[] array()
ReadOnlyBufferException - if this buffer is based on an array, but it is read-only.UnsupportedOperationException - if this buffer is not based on an array.public final int arrayOffset()
The offset is the index of the array and corresponds to the zero position of the buffer.
ReadOnlyBufferException - if this buffer is based on an array, but it is read-only.UnsupportedOperationException - if this buffer is not based on an array.public abstract FloatBuffer asReadOnlyBuffer()
The returned buffer is guaranteed to be a new instance, even if this buffer is read-only itself. The new buffer's position, limit, capacity and mark are the same as this buffer.
The new buffer shares its content with this buffer, which means this buffer's change of content will be visible to the new buffer. The two buffer's position, limit and mark are independent.
public abstract FloatBuffer compact()
The remaining floats will be moved to the head of the buffer, starting
from position zero. Then the position is set to remaining(); the
limit is set to capacity; the mark is cleared.
ReadOnlyBufferException - if no changes may be made to the contents of this buffer.public int compareTo(FloatBuffer otherBuffer)
compareTo in interface Comparable<FloatBuffer>otherBuffer - another float buffer.otherBuffer; 0 if
this equals to otherBuffer; a positive value if this is
greater than otherBuffer.ClassCastException - if otherBuffer is not a float buffer.public abstract FloatBuffer duplicate()
The duplicated buffer's position, limit, capacity and mark are the same as this buffer. The duplicated buffer's read-only property and byte order are same as this buffer too.
The new buffer shares its content with this buffer, which means either buffer's change of content will be visible to the other. The two buffer's position, limit and mark are independent.
public boolean equals(Object other)
If other is not a float buffer then false is returned.
Two float buffers are equal if and only if their remaining floats are
exactly the same. Position, limit, capacity and mark are not considered.
public abstract float get()
BufferUnderflowException - if the position is equal or greater than limit.public FloatBuffer get(float[] dest)
Calling this method has the same effect as
get(dest, 0, dest.length).
dest - the destination float array.BufferUnderflowException - if dest.length is greater than remaining().public FloatBuffer get(float[] dest, int off, int len)
dest - the target float array.off - the offset of the float array, must not be negative and no
greater than dest.length.len - the number of floats to read, must be no less than zero and no
greater than dest.length - off.IndexOutOfBoundsException - if either off or len is invalid.BufferUnderflowException - if len is greater than remaining().public abstract float get(int index)
index - the index, must not be negative and less than limit.IndexOutOfBoundsException - if index is invalid.public final boolean hasArray()
true if this buffer is based on a float array and
provides read/write access, false otherwise.public int hashCode()
public abstract boolean isDirect()
A float buffer is direct if it is based on a byte buffer and the byte buffer is direct.
true if this buffer is direct, false otherwise.public abstract ByteOrder order()
If this buffer is not based on a byte buffer, then always return the platform's native byte order.
public abstract FloatBuffer put(float f)
f - the float to write.BufferOverflowException - if position is equal or greater than limit.ReadOnlyBufferException - if no changes may be made to the contents of this buffer.public final FloatBuffer put(float[] src)
Calling this method has the same effect as
put(src, 0, src.length).
src - the source float array.BufferOverflowException - if remaining() is less than src.length.ReadOnlyBufferException - if no changes may be made to the contents of this buffer.public FloatBuffer put(float[] src, int off, int len)
src - the source float array.off - the offset of float array, must not be negative and not
greater than src.length.len - the number of floats to write, must be no less than zero and
no greater than src.length - off.BufferOverflowException - if remaining() is less than len.IndexOutOfBoundsException - if either off or len is invalid.ReadOnlyBufferException - if no changes may be made to the contents of this buffer.public FloatBuffer put(FloatBuffer src)
src float buffer to this
buffer's current position, and increases both buffers' position by the
number of floats copied.src - the source float buffer.BufferOverflowException - if src.remaining() is greater than this buffer's
remaining().IllegalArgumentException - if src is this buffer.ReadOnlyBufferException - if no changes may be made to the contents of this buffer.public abstract FloatBuffer put(int index, float f)
index - the index, must not be negative and less than the limit.f - the float to write.IndexOutOfBoundsException - if index is invalid.ReadOnlyBufferException - if no changes may be made to the contents of this buffer.public abstract FloatBuffer slice()
The sliced buffer's capacity will be this buffer's remaining(),
and its zero position will correspond to this buffer's current position.
The new buffer's position will be 0, limit will be its capacity, and its
mark is cleared. The new buffer's read-only property and byte order are
same as this buffer's.
The new buffer shares its content with this buffer, which means either buffer's change of content will be visible to the other. The two buffer's position, limit and mark are independent.
Copyright © 2020 Dmitrii Tikhomirov. All rights reserved.