程序包 org.wowtools.giscat.vector.pojo.proto

类 ProtoFeature.Polygon.Builder

  • 所有已实现的接口:
    com.google.protobuf.Message.Builder, com.google.protobuf.MessageLite.Builder, com.google.protobuf.MessageLiteOrBuilder, com.google.protobuf.MessageOrBuilder, Cloneable, ProtoFeature.PolygonOrBuilder
    封闭类:
    ProtoFeature.Polygon
    public static final class ProtoFeature.Polygon.Builder
extends com.google.protobuf.GeneratedMessageV3.Builder<ProtoFeature.Polygon.Builder>
implements ProtoFeature.PolygonOrBuilder
     Polygon 包含多边形上各个点的x y z坐标，z可选。
 separators用于将坐标串分割为环 例如,xs ys zs 形成了坐标串[p0,p1,p2,p3,p4,p5,p6,p7,p8,p9]，
 则separators=[3,7]将坐标串分割为多边形Polygon((p0 p1 p2),(p3 p4 p5 p6),(p7 p8 p9))。
 即separators[i]的意义为第i个环的终点(从0开始计数)；最后一个环的终点显然是数组的最后一位，故将其省略。
 注意，由于环的最后一个坐标必然和第一个坐标相等，故将环的最后一个坐标省略，仅在转换为jts等对象时将其补全。
    Protobuf type pojo.Polygon

    • 方法详细资料

      • getDescriptor

        public static final com.google.protobuf.Descriptors.Descriptor getDescriptor()

      • internalGetFieldAccessorTable

        protected com.google.protobuf.GeneratedMessageV3.FieldAccessorTable internalGetFieldAccessorTable()
        指定者:
        internalGetFieldAccessorTable 在类中 com.google.protobuf.GeneratedMessageV3.Builder<ProtoFeature.Polygon.Builder>

      • clear

        public ProtoFeature.Polygon.Builder clear()
        指定者:
        clear 在接口中 com.google.protobuf.Message.Builder
        指定者:
        clear 在接口中 com.google.protobuf.MessageLite.Builder
        覆盖:
        clear 在类中 com.google.protobuf.GeneratedMessageV3.Builder<ProtoFeature.Polygon.Builder>

      • getDescriptorForType

        public com.google.protobuf.Descriptors.Descriptor getDescriptorForType()
        指定者:
        getDescriptorForType 在接口中 com.google.protobuf.Message.Builder
        指定者:
        getDescriptorForType 在接口中 com.google.protobuf.MessageOrBuilder
        覆盖:
        getDescriptorForType 在类中 com.google.protobuf.GeneratedMessageV3.Builder<ProtoFeature.Polygon.Builder>

      • getDefaultInstanceForType

        public ProtoFeature.Polygon getDefaultInstanceForType()
        指定者:
        getDefaultInstanceForType 在接口中 com.google.protobuf.MessageLiteOrBuilder
        指定者:
        getDefaultInstanceForType 在接口中 com.google.protobuf.MessageOrBuilder

      • build

        public ProtoFeature.Polygon build()
        指定者:
        build 在接口中 com.google.protobuf.Message.Builder
        指定者:
        build 在接口中 com.google.protobuf.MessageLite.Builder

      • buildPartial

        public ProtoFeature.Polygon buildPartial()
        指定者:
        buildPartial 在接口中 com.google.protobuf.Message.Builder
        指定者:
        buildPartial 在接口中 com.google.protobuf.MessageLite.Builder

      • clone

        public ProtoFeature.Polygon.Builder clone()
        指定者:
        clone 在接口中 com.google.protobuf.Message.Builder
        指定者:
        clone 在接口中 com.google.protobuf.MessageLite.Builder
        覆盖:
        clone 在类中 com.google.protobuf.GeneratedMessageV3.Builder<ProtoFeature.Polygon.Builder>

      • clearField

        public ProtoFeature.Polygon.Builder clearField​(com.google.protobuf.Descriptors.FieldDescriptor field)
        指定者:
        clearField 在接口中 com.google.protobuf.Message.Builder
        覆盖:
        clearField 在类中 com.google.protobuf.GeneratedMessageV3.Builder<ProtoFeature.Polygon.Builder>

      • clearOneof

        public ProtoFeature.Polygon.Builder clearOneof​(com.google.protobuf.Descriptors.OneofDescriptor oneof)
        指定者:
        clearOneof 在接口中 com.google.protobuf.Message.Builder
        覆盖:
        clearOneof 在类中 com.google.protobuf.GeneratedMessageV3.Builder<ProtoFeature.Polygon.Builder>

      • setRepeatedField

        public ProtoFeature.Polygon.Builder setRepeatedField​(com.google.protobuf.Descriptors.FieldDescriptor field,
                                                     int index,
                                                     Object value)
        指定者:
        setRepeatedField 在接口中 com.google.protobuf.Message.Builder
        覆盖:
        setRepeatedField 在类中 com.google.protobuf.GeneratedMessageV3.Builder<ProtoFeature.Polygon.Builder>

      • addRepeatedField

        public ProtoFeature.Polygon.Builder addRepeatedField​(com.google.protobuf.Descriptors.FieldDescriptor field,
                                                     Object value)
        指定者:
        addRepeatedField 在接口中 com.google.protobuf.Message.Builder
        覆盖:
        addRepeatedField 在类中 com.google.protobuf.GeneratedMessageV3.Builder<ProtoFeature.Polygon.Builder>

      • isInitialized

        public final boolean isInitialized()
        指定者:
        isInitialized 在接口中 com.google.protobuf.MessageLiteOrBuilder
        覆盖:
        isInitialized 在类中 com.google.protobuf.GeneratedMessageV3.Builder<ProtoFeature.Polygon.Builder>

      • mergeFrom

        public ProtoFeature.Polygon.Builder mergeFrom​(com.google.protobuf.CodedInputStream input,
                                              com.google.protobuf.ExtensionRegistryLite extensionRegistry)
                                       throws IOException
        指定者:
        mergeFrom 在接口中 com.google.protobuf.Message.Builder
        指定者:
        mergeFrom 在接口中 com.google.protobuf.MessageLite.Builder
        覆盖:
        mergeFrom 在类中 com.google.protobuf.AbstractMessage.Builder<ProtoFeature.Polygon.Builder>
        抛出:
        IOException

      • getXs

        public double getXs​(int index)
        repeated double xs = 1;
        指定者:
        getXs 在接口中 ProtoFeature.PolygonOrBuilder
        参数:
        index - The index of the element to return.
        返回:
        The xs at the given index.

      • setXs

        public ProtoFeature.Polygon.Builder setXs​(int index,
                                          double value)
        repeated double xs = 1;
        参数:
        index - The index to set the value at.
        value - The xs to set.
        返回:
        This builder for chaining.

      • addXs

        public ProtoFeature.Polygon.Builder addXs​(double value)
        repeated double xs = 1;
        参数:
        value - The xs to add.
        返回:
        This builder for chaining.

      • getYs

        public double getYs​(int index)
        repeated double ys = 2;
        指定者:
        getYs 在接口中 ProtoFeature.PolygonOrBuilder
        参数:
        index - The index of the element to return.
        返回:
        The ys at the given index.

      • setYs

        public ProtoFeature.Polygon.Builder setYs​(int index,
                                          double value)
        repeated double ys = 2;
        参数:
        index - The index to set the value at.
        value - The ys to set.
        返回:
        This builder for chaining.

      • addYs

        public ProtoFeature.Polygon.Builder addYs​(double value)
        repeated double ys = 2;
        参数:
        value - The ys to add.
        返回:
        This builder for chaining.

      • getZs

        public double getZs​(int index)
        repeated double zs = 3;
        指定者:
        getZs 在接口中 ProtoFeature.PolygonOrBuilder
        参数:
        index - The index of the element to return.
        返回:
        The zs at the given index.

      • setZs

        public ProtoFeature.Polygon.Builder setZs​(int index,
                                          double value)
        repeated double zs = 3;
        参数:
        index - The index to set the value at.
        value - The zs to set.
        返回:
        This builder for chaining.

      • addZs

        public ProtoFeature.Polygon.Builder addZs​(double value)
        repeated double zs = 3;
        参数:
        value - The zs to add.
        返回:
        This builder for chaining.

      • getSeparators

        public int getSeparators​(int index)
        repeated int32 separators = 4;
        指定者:
        getSeparators 在接口中 ProtoFeature.PolygonOrBuilder
        参数:
        index - The index of the element to return.
        返回:
        The separators at the given index.

      • setSeparators

        public ProtoFeature.Polygon.Builder setSeparators​(int index,
                                                  int value)
        repeated int32 separators = 4;
        参数:
        index - The index to set the value at.
        value - The separators to set.
        返回:
        This builder for chaining.

      • addSeparators

        public ProtoFeature.Polygon.Builder addSeparators​(int value)
        repeated int32 separators = 4;
        参数:
        value - The separators to add.
        返回:
        This builder for chaining.

      • addAllSeparators

        public ProtoFeature.Polygon.Builder addAllSeparators​(Iterable<? extends Integer> values)
        repeated int32 separators = 4;
        参数:
        values - The separators to add.
        返回:
        This builder for chaining.

      • setUnknownFields

        public final ProtoFeature.Polygon.Builder setUnknownFields​(com.google.protobuf.UnknownFieldSet unknownFields)
        指定者:
        setUnknownFields 在接口中 com.google.protobuf.Message.Builder
        覆盖:
        setUnknownFields 在类中 com.google.protobuf.GeneratedMessageV3.Builder<ProtoFeature.Polygon.Builder>

      • mergeUnknownFields

        public final ProtoFeature.Polygon.Builder mergeUnknownFields​(com.google.protobuf.UnknownFieldSet unknownFields)
        指定者:
        mergeUnknownFields 在接口中 com.google.protobuf.Message.Builder
        覆盖:
        mergeUnknownFields 在类中 com.google.protobuf.GeneratedMessageV3.Builder<ProtoFeature.Polygon.Builder>