Package software.amazon.awssdk.services.account

Interface AccountAsyncClient

    • Method Detail

      • deleteAlternateContact

        default CompletableFuture<DeleteAlternateContactResponse> deleteAlternateContact​(DeleteAlternateContactRequest deleteAlternateContactRequest)

        Deletes the specified alternate contact from an Amazon Web Services account.

        For complete details about how to use the alternate contact operations, see Access or updating the alternate contacts.

        Before you can update the alternate contact information for an Amazon Web Services account that is managed by Organizations, you must first enable integration between Amazon Web Services Account Management and Organizations. For more information, see Enabling trusted access for Amazon Web Services Account Management.

        Parameters:
        deleteAlternateContactRequest -
        Returns:
        A Java Future containing the result of the DeleteAlternateContact operation returned by the service.
        The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
        • ResourceNotFoundException The operation failed because it specified a resource that can't be found.
        • ValidationException The operation failed because one of the input parameters was invalid.
        • AccessDeniedException The operation failed because the calling identity doesn't have the minimum required permissions.
        • TooManyRequestsException The operation failed because it was called too frequently and exceeded a throttle limit.
        • InternalServerException The operation failed because of an error internal to Amazon Web Services. Try your operation again later.
        • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
        • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
        • AccountException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
        See Also:
        AWS API Documentation

      • deleteAlternateContact

        default CompletableFuture<DeleteAlternateContactResponse> deleteAlternateContact​(Consumer<DeleteAlternateContactRequest.Builder> deleteAlternateContactRequest)

        Deletes the specified alternate contact from an Amazon Web Services account.

        For complete details about how to use the alternate contact operations, see Access or updating the alternate contacts.

        Before you can update the alternate contact information for an Amazon Web Services account that is managed by Organizations, you must first enable integration between Amazon Web Services Account Management and Organizations. For more information, see Enabling trusted access for Amazon Web Services Account Management.


        This is a convenience which creates an instance of the DeleteAlternateContactRequest.Builder avoiding the need to create one manually via DeleteAlternateContactRequest.builder()

        Parameters:
        deleteAlternateContactRequest - A Consumer that will call methods on DeleteAlternateContactRequest.Builder to create a request.
        Returns:
        A Java Future containing the result of the DeleteAlternateContact operation returned by the service.
        The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
        • ResourceNotFoundException The operation failed because it specified a resource that can't be found.
        • ValidationException The operation failed because one of the input parameters was invalid.
        • AccessDeniedException The operation failed because the calling identity doesn't have the minimum required permissions.
        • TooManyRequestsException The operation failed because it was called too frequently and exceeded a throttle limit.
        • InternalServerException The operation failed because of an error internal to Amazon Web Services. Try your operation again later.
        • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
        • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
        • AccountException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
        See Also:
        AWS API Documentation

      • disableRegion

        default CompletableFuture<DisableRegionResponse> disableRegion​(DisableRegionRequest disableRegionRequest)

        Disables (opts-out) a particular Region for an account.

        Parameters:
        disableRegionRequest -
        Returns:
        A Java Future containing the result of the DisableRegion operation returned by the service.
        The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
        • ValidationException The operation failed because one of the input parameters was invalid.
        • ConflictException The request could not be processed because of a conflict in the current status of the resource. For example, this happens if you try to enable a Region that is currently being disabled (in a status of DISABLING).
        • AccessDeniedException The operation failed because the calling identity doesn't have the minimum required permissions.
        • TooManyRequestsException The operation failed because it was called too frequently and exceeded a throttle limit.
        • InternalServerException The operation failed because of an error internal to Amazon Web Services. Try your operation again later.
        • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
        • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
        • AccountException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
        See Also:
        AWS API Documentation

      • disableRegion

        default CompletableFuture<DisableRegionResponse> disableRegion​(Consumer<DisableRegionRequest.Builder> disableRegionRequest)

        Disables (opts-out) a particular Region for an account.


        This is a convenience which creates an instance of the DisableRegionRequest.Builder avoiding the need to create one manually via DisableRegionRequest.builder()

        Parameters:
        disableRegionRequest - A Consumer that will call methods on DisableRegionRequest.Builder to create a request.
        Returns:
        A Java Future containing the result of the DisableRegion operation returned by the service.
        The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
        • ValidationException The operation failed because one of the input parameters was invalid.
        • ConflictException The request could not be processed because of a conflict in the current status of the resource. For example, this happens if you try to enable a Region that is currently being disabled (in a status of DISABLING).
        • AccessDeniedException The operation failed because the calling identity doesn't have the minimum required permissions.
        • TooManyRequestsException The operation failed because it was called too frequently and exceeded a throttle limit.
        • InternalServerException The operation failed because of an error internal to Amazon Web Services. Try your operation again later.
        • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
        • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
        • AccountException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
        See Also:
        AWS API Documentation

      • enableRegion

        default CompletableFuture<EnableRegionResponse> enableRegion​(EnableRegionRequest enableRegionRequest)

        Enables (opts-in) a particular Region for an account.

        Parameters:
        enableRegionRequest -
        Returns:
        A Java Future containing the result of the EnableRegion operation returned by the service.
        The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
        • ValidationException The operation failed because one of the input parameters was invalid.
        • ConflictException The request could not be processed because of a conflict in the current status of the resource. For example, this happens if you try to enable a Region that is currently being disabled (in a status of DISABLING).
        • AccessDeniedException The operation failed because the calling identity doesn't have the minimum required permissions.
        • TooManyRequestsException The operation failed because it was called too frequently and exceeded a throttle limit.
        • InternalServerException The operation failed because of an error internal to Amazon Web Services. Try your operation again later.
        • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
        • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
        • AccountException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
        See Also:
        AWS API Documentation

      • enableRegion

        default CompletableFuture<EnableRegionResponse> enableRegion​(Consumer<EnableRegionRequest.Builder> enableRegionRequest)

        Enables (opts-in) a particular Region for an account.


        This is a convenience which creates an instance of the EnableRegionRequest.Builder avoiding the need to create one manually via EnableRegionRequest.builder()

        Parameters:
        enableRegionRequest - A Consumer that will call methods on EnableRegionRequest.Builder to create a request.
        Returns:
        A Java Future containing the result of the EnableRegion operation returned by the service.
        The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
        • ValidationException The operation failed because one of the input parameters was invalid.
        • ConflictException The request could not be processed because of a conflict in the current status of the resource. For example, this happens if you try to enable a Region that is currently being disabled (in a status of DISABLING).
        • AccessDeniedException The operation failed because the calling identity doesn't have the minimum required permissions.
        • TooManyRequestsException The operation failed because it was called too frequently and exceeded a throttle limit.
        • InternalServerException The operation failed because of an error internal to Amazon Web Services. Try your operation again later.
        • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
        • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
        • AccountException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
        See Also:
        AWS API Documentation

      • getAlternateContact

        default CompletableFuture<GetAlternateContactResponse> getAlternateContact​(GetAlternateContactRequest getAlternateContactRequest)

        Retrieves the specified alternate contact attached to an Amazon Web Services account.

        For complete details about how to use the alternate contact operations, see Access or updating the alternate contacts.

        Before you can update the alternate contact information for an Amazon Web Services account that is managed by Organizations, you must first enable integration between Amazon Web Services Account Management and Organizations. For more information, see Enabling trusted access for Amazon Web Services Account Management.

        Parameters:
        getAlternateContactRequest -
        Returns:
        A Java Future containing the result of the GetAlternateContact operation returned by the service.
        The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
        • ResourceNotFoundException The operation failed because it specified a resource that can't be found.
        • ValidationException The operation failed because one of the input parameters was invalid.
        • AccessDeniedException The operation failed because the calling identity doesn't have the minimum required permissions.
        • TooManyRequestsException The operation failed because it was called too frequently and exceeded a throttle limit.
        • InternalServerException The operation failed because of an error internal to Amazon Web Services. Try your operation again later.
        • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
        • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
        • AccountException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
        See Also:
        AWS API Documentation

      • getAlternateContact

        default CompletableFuture<GetAlternateContactResponse> getAlternateContact​(Consumer<GetAlternateContactRequest.Builder> getAlternateContactRequest)

        Retrieves the specified alternate contact attached to an Amazon Web Services account.

        For complete details about how to use the alternate contact operations, see Access or updating the alternate contacts.

        Before you can update the alternate contact information for an Amazon Web Services account that is managed by Organizations, you must first enable integration between Amazon Web Services Account Management and Organizations. For more information, see Enabling trusted access for Amazon Web Services Account Management.


        This is a convenience which creates an instance of the GetAlternateContactRequest.Builder avoiding the need to create one manually via GetAlternateContactRequest.builder()

        Parameters:
        getAlternateContactRequest - A Consumer that will call methods on GetAlternateContactRequest.Builder to create a request.
        Returns:
        A Java Future containing the result of the GetAlternateContact operation returned by the service.
        The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
        • ResourceNotFoundException The operation failed because it specified a resource that can't be found.
        • ValidationException The operation failed because one of the input parameters was invalid.
        • AccessDeniedException The operation failed because the calling identity doesn't have the minimum required permissions.
        • TooManyRequestsException The operation failed because it was called too frequently and exceeded a throttle limit.
        • InternalServerException The operation failed because of an error internal to Amazon Web Services. Try your operation again later.
        • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
        • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
        • AccountException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
        See Also:
        AWS API Documentation

      • getContactInformation

        default CompletableFuture<GetContactInformationResponse> getContactInformation​(GetContactInformationRequest getContactInformationRequest)

        Retrieves the primary contact information of an Amazon Web Services account.

        For complete details about how to use the primary contact operations, see Update the primary and alternate contact information.

        Parameters:
        getContactInformationRequest -
        Returns:
        A Java Future containing the result of the GetContactInformation operation returned by the service.
        The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
        • ResourceNotFoundException The operation failed because it specified a resource that can't be found.
        • ValidationException The operation failed because one of the input parameters was invalid.
        • AccessDeniedException The operation failed because the calling identity doesn't have the minimum required permissions.
        • TooManyRequestsException The operation failed because it was called too frequently and exceeded a throttle limit.
        • InternalServerException The operation failed because of an error internal to Amazon Web Services. Try your operation again later.
        • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
        • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
        • AccountException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
        See Also:
        AWS API Documentation

      • getContactInformation

        default CompletableFuture<GetContactInformationResponse> getContactInformation​(Consumer<GetContactInformationRequest.Builder> getContactInformationRequest)

        Retrieves the primary contact information of an Amazon Web Services account.

        For complete details about how to use the primary contact operations, see Update the primary and alternate contact information.


        This is a convenience which creates an instance of the GetContactInformationRequest.Builder avoiding the need to create one manually via GetContactInformationRequest.builder()

        Parameters:
        getContactInformationRequest - A Consumer that will call methods on GetContactInformationRequest.Builder to create a request.
        Returns:
        A Java Future containing the result of the GetContactInformation operation returned by the service.
        The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
        • ResourceNotFoundException The operation failed because it specified a resource that can't be found.
        • ValidationException The operation failed because one of the input parameters was invalid.
        • AccessDeniedException The operation failed because the calling identity doesn't have the minimum required permissions.
        • TooManyRequestsException The operation failed because it was called too frequently and exceeded a throttle limit.
        • InternalServerException The operation failed because of an error internal to Amazon Web Services. Try your operation again later.
        • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
        • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
        • AccountException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
        See Also:
        AWS API Documentation

      • getRegionOptStatus

        default CompletableFuture<GetRegionOptStatusResponse> getRegionOptStatus​(GetRegionOptStatusRequest getRegionOptStatusRequest)

        Retrieves the opt-in status of a particular Region.

        Parameters:
        getRegionOptStatusRequest -
        Returns:
        A Java Future containing the result of the GetRegionOptStatus operation returned by the service.
        The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
        • ValidationException The operation failed because one of the input parameters was invalid.
        • AccessDeniedException The operation failed because the calling identity doesn't have the minimum required permissions.
        • TooManyRequestsException The operation failed because it was called too frequently and exceeded a throttle limit.
        • InternalServerException The operation failed because of an error internal to Amazon Web Services. Try your operation again later.
        • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
        • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
        • AccountException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
        See Also:
        AWS API Documentation

      • getRegionOptStatus

        default CompletableFuture<GetRegionOptStatusResponse> getRegionOptStatus​(Consumer<GetRegionOptStatusRequest.Builder> getRegionOptStatusRequest)

        Retrieves the opt-in status of a particular Region.


        This is a convenience which creates an instance of the GetRegionOptStatusRequest.Builder avoiding the need to create one manually via GetRegionOptStatusRequest.builder()

        Parameters:
        getRegionOptStatusRequest - A Consumer that will call methods on GetRegionOptStatusRequest.Builder to create a request.
        Returns:
        A Java Future containing the result of the GetRegionOptStatus operation returned by the service.
        The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
        • ValidationException The operation failed because one of the input parameters was invalid.
        • AccessDeniedException The operation failed because the calling identity doesn't have the minimum required permissions.
        • TooManyRequestsException The operation failed because it was called too frequently and exceeded a throttle limit.
        • InternalServerException The operation failed because of an error internal to Amazon Web Services. Try your operation again later.
        • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
        • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
        • AccountException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
        See Also:
        AWS API Documentation

      • listRegions

        default CompletableFuture<ListRegionsResponse> listRegions​(ListRegionsRequest listRegionsRequest)

        Lists all the Regions for a given account and their respective opt-in statuses. Optionally, this list can be filtered by the region-opt-status-contains parameter.

        Parameters:
        listRegionsRequest -
        Returns:
        A Java Future containing the result of the ListRegions operation returned by the service.
        The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
        • ValidationException The operation failed because one of the input parameters was invalid.
        • AccessDeniedException The operation failed because the calling identity doesn't have the minimum required permissions.
        • TooManyRequestsException The operation failed because it was called too frequently and exceeded a throttle limit.
        • InternalServerException The operation failed because of an error internal to Amazon Web Services. Try your operation again later.
        • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
        • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
        • AccountException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
        See Also:
        AWS API Documentation

      • listRegions

        default CompletableFuture<ListRegionsResponse> listRegions​(Consumer<ListRegionsRequest.Builder> listRegionsRequest)

        Lists all the Regions for a given account and their respective opt-in statuses. Optionally, this list can be filtered by the region-opt-status-contains parameter.


        This is a convenience which creates an instance of the ListRegionsRequest.Builder avoiding the need to create one manually via ListRegionsRequest.builder()

        Parameters:
        listRegionsRequest - A Consumer that will call methods on ListRegionsRequest.Builder to create a request.
        Returns:
        A Java Future containing the result of the ListRegions operation returned by the service.
        The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
        • ValidationException The operation failed because one of the input parameters was invalid.
        • AccessDeniedException The operation failed because the calling identity doesn't have the minimum required permissions.
        • TooManyRequestsException The operation failed because it was called too frequently and exceeded a throttle limit.
        • InternalServerException The operation failed because of an error internal to Amazon Web Services. Try your operation again later.
        • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
        • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
        • AccountException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
        See Also:
        AWS API Documentation

      • listRegionsPaginator

        default ListRegionsPublisher listRegionsPaginator​(ListRegionsRequest listRegionsRequest)

        Lists all the Regions for a given account and their respective opt-in statuses. Optionally, this list can be filtered by the region-opt-status-contains parameter.


        This is a variant of listRegions(software.amazon.awssdk.services.account.model.ListRegionsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

        When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

        The following are few ways to use the response class:

        1) Using the subscribe helper method 
         
 software.amazon.awssdk.services.account.paginators.ListRegionsPublisher publisher = client.listRegionsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
        2) Using a custom subscriber 
         
 software.amazon.awssdk.services.account.paginators.ListRegionsPublisher publisher = client.listRegionsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.account.model.ListRegionsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.account.model.ListRegionsResponse response) { //... };
 });
        As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

        Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

        Note: If you prefer to have control on service calls, use the listRegions(software.amazon.awssdk.services.account.model.ListRegionsRequest) operation.

        Parameters:
        listRegionsRequest -
        Returns:
        A custom publisher that can be subscribed to request a stream of response pages.
        The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
        • ValidationException The operation failed because one of the input parameters was invalid.
        • AccessDeniedException The operation failed because the calling identity doesn't have the minimum required permissions.
        • TooManyRequestsException The operation failed because it was called too frequently and exceeded a throttle limit.
        • InternalServerException The operation failed because of an error internal to Amazon Web Services. Try your operation again later.
        • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
        • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
        • AccountException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
        See Also:
        AWS API Documentation

      • listRegionsPaginator

        default ListRegionsPublisher listRegionsPaginator​(Consumer<ListRegionsRequest.Builder> listRegionsRequest)

        Lists all the Regions for a given account and their respective opt-in statuses. Optionally, this list can be filtered by the region-opt-status-contains parameter.


        This is a variant of listRegions(software.amazon.awssdk.services.account.model.ListRegionsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

        When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

        The following are few ways to use the response class:

        1) Using the subscribe helper method 
         
 software.amazon.awssdk.services.account.paginators.ListRegionsPublisher publisher = client.listRegionsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
        2) Using a custom subscriber 
         
 software.amazon.awssdk.services.account.paginators.ListRegionsPublisher publisher = client.listRegionsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.account.model.ListRegionsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.account.model.ListRegionsResponse response) { //... };
 });
        As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

        Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

        Note: If you prefer to have control on service calls, use the listRegions(software.amazon.awssdk.services.account.model.ListRegionsRequest) operation.

        This is a convenience which creates an instance of the ListRegionsRequest.Builder avoiding the need to create one manually via ListRegionsRequest.builder()

        Parameters:
        listRegionsRequest - A Consumer that will call methods on ListRegionsRequest.Builder to create a request.
        Returns:
        A custom publisher that can be subscribed to request a stream of response pages.
        The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
        • ValidationException The operation failed because one of the input parameters was invalid.
        • AccessDeniedException The operation failed because the calling identity doesn't have the minimum required permissions.
        • TooManyRequestsException The operation failed because it was called too frequently and exceeded a throttle limit.
        • InternalServerException The operation failed because of an error internal to Amazon Web Services. Try your operation again later.
        • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
        • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
        • AccountException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
        See Also:
        AWS API Documentation

      • putAlternateContact

        default CompletableFuture<PutAlternateContactResponse> putAlternateContact​(PutAlternateContactRequest putAlternateContactRequest)

        Modifies the specified alternate contact attached to an Amazon Web Services account.

        For complete details about how to use the alternate contact operations, see Access or updating the alternate contacts.

        Before you can update the alternate contact information for an Amazon Web Services account that is managed by Organizations, you must first enable integration between Amazon Web Services Account Management and Organizations. For more information, see Enabling trusted access for Amazon Web Services Account Management.

        Parameters:
        putAlternateContactRequest -
        Returns:
        A Java Future containing the result of the PutAlternateContact operation returned by the service.
        The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
        • ValidationException The operation failed because one of the input parameters was invalid.
        • AccessDeniedException The operation failed because the calling identity doesn't have the minimum required permissions.
        • TooManyRequestsException The operation failed because it was called too frequently and exceeded a throttle limit.
        • InternalServerException The operation failed because of an error internal to Amazon Web Services. Try your operation again later.
        • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
        • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
        • AccountException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
        See Also:
        AWS API Documentation

      • putAlternateContact

        default CompletableFuture<PutAlternateContactResponse> putAlternateContact​(Consumer<PutAlternateContactRequest.Builder> putAlternateContactRequest)

        Modifies the specified alternate contact attached to an Amazon Web Services account.

        For complete details about how to use the alternate contact operations, see Access or updating the alternate contacts.

        Before you can update the alternate contact information for an Amazon Web Services account that is managed by Organizations, you must first enable integration between Amazon Web Services Account Management and Organizations. For more information, see Enabling trusted access for Amazon Web Services Account Management.


        This is a convenience which creates an instance of the PutAlternateContactRequest.Builder avoiding the need to create one manually via PutAlternateContactRequest.builder()

        Parameters:
        putAlternateContactRequest - A Consumer that will call methods on PutAlternateContactRequest.Builder to create a request.
        Returns:
        A Java Future containing the result of the PutAlternateContact operation returned by the service.
        The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
        • ValidationException The operation failed because one of the input parameters was invalid.
        • AccessDeniedException The operation failed because the calling identity doesn't have the minimum required permissions.
        • TooManyRequestsException The operation failed because it was called too frequently and exceeded a throttle limit.
        • InternalServerException The operation failed because of an error internal to Amazon Web Services. Try your operation again later.
        • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
        • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
        • AccountException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
        See Also:
        AWS API Documentation

      • putContactInformation

        default CompletableFuture<PutContactInformationResponse> putContactInformation​(PutContactInformationRequest putContactInformationRequest)

        Updates the primary contact information of an Amazon Web Services account.

        For complete details about how to use the primary contact operations, see Update the primary and alternate contact information.

        Parameters:
        putContactInformationRequest -
        Returns:
        A Java Future containing the result of the PutContactInformation operation returned by the service.
        The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
        • ValidationException The operation failed because one of the input parameters was invalid.
        • AccessDeniedException The operation failed because the calling identity doesn't have the minimum required permissions.
        • TooManyRequestsException The operation failed because it was called too frequently and exceeded a throttle limit.
        • InternalServerException The operation failed because of an error internal to Amazon Web Services. Try your operation again later.
        • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
        • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
        • AccountException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
        See Also:
        AWS API Documentation

      • putContactInformation

        default CompletableFuture<PutContactInformationResponse> putContactInformation​(Consumer<PutContactInformationRequest.Builder> putContactInformationRequest)

        Updates the primary contact information of an Amazon Web Services account.

        For complete details about how to use the primary contact operations, see Update the primary and alternate contact information.


        This is a convenience which creates an instance of the PutContactInformationRequest.Builder avoiding the need to create one manually via PutContactInformationRequest.builder()

        Parameters:
        putContactInformationRequest - A Consumer that will call methods on PutContactInformationRequest.Builder to create a request.
        Returns:
        A Java Future containing the result of the PutContactInformation operation returned by the service.
        The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
        • ValidationException The operation failed because one of the input parameters was invalid.
        • AccessDeniedException The operation failed because the calling identity doesn't have the minimum required permissions.
        • TooManyRequestsException The operation failed because it was called too frequently and exceeded a throttle limit.
        • InternalServerException The operation failed because of an error internal to Amazon Web Services. Try your operation again later.
        • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
        • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
        • AccountException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
        See Also:
        AWS API Documentation