All Superinterfaces:

AutoCloseable, AwsClient, SdkAutoCloseable, SdkClient
```
@Generated("software.amazon.awssdk:codegen")
@ThreadSafe
public interface CleanRoomsMlClient
extends AwsClient
```
Service client for accessing cleanrooms-ml. This can be created using the static builder() method.
API Reference for Amazon Web Services Clean Rooms ML.

Field Summary

Fields
Modifier and Type Field Description

static String SERVICE_METADATA_ID
Value for looking up the service's metadata from the ServiceMetadataProvider.

static String SERVICE_NAME

Method Summary

All Methods Static Methods Instance Methods Default Methods
Modifier and Type	Method	Description
`static CleanRoomsMlClientBuilder`	`builder()`	Create a builder that can be used to configure and create a `CleanRoomsMlClient`.
`static CleanRoomsMlClient`	`create()`	Create a `CleanRoomsMlClient` with the region loaded from the `DefaultAwsRegionProviderChain` and credentials loaded from the `DefaultCredentialsProvider`.
`default CreateAudienceModelResponse`	`createAudienceModel(Consumer<CreateAudienceModelRequest.Builder> createAudienceModelRequest)`	Defines the information necessary to create an audience model.
`default CreateAudienceModelResponse`	`createAudienceModel(CreateAudienceModelRequest createAudienceModelRequest)`	Defines the information necessary to create an audience model.
`default CreateConfiguredAudienceModelResponse`	`createConfiguredAudienceModel(Consumer<CreateConfiguredAudienceModelRequest.Builder> createConfiguredAudienceModelRequest)`	Defines the information necessary to create a configured audience model.
`default CreateConfiguredAudienceModelResponse`	`createConfiguredAudienceModel(CreateConfiguredAudienceModelRequest createConfiguredAudienceModelRequest)`	Defines the information necessary to create a configured audience model.
`default CreateTrainingDatasetResponse`	`createTrainingDataset(Consumer<CreateTrainingDatasetRequest.Builder> createTrainingDatasetRequest)`	Defines the information necessary to create a training dataset, or seed audience.
`default CreateTrainingDatasetResponse`	`createTrainingDataset(CreateTrainingDatasetRequest createTrainingDatasetRequest)`	Defines the information necessary to create a training dataset, or seed audience.
`default DeleteAudienceGenerationJobResponse`	`deleteAudienceGenerationJob(Consumer<DeleteAudienceGenerationJobRequest.Builder> deleteAudienceGenerationJobRequest)`	Deletes the specified audience generation job, and removes all data associated with the job.
`default DeleteAudienceGenerationJobResponse`	`deleteAudienceGenerationJob(DeleteAudienceGenerationJobRequest deleteAudienceGenerationJobRequest)`	Deletes the specified audience generation job, and removes all data associated with the job.
`default DeleteAudienceModelResponse`	`deleteAudienceModel(Consumer<DeleteAudienceModelRequest.Builder> deleteAudienceModelRequest)`	Specifies an audience model that you want to delete.
`default DeleteAudienceModelResponse`	`deleteAudienceModel(DeleteAudienceModelRequest deleteAudienceModelRequest)`	Specifies an audience model that you want to delete.
`default DeleteConfiguredAudienceModelResponse`	`deleteConfiguredAudienceModel(Consumer<DeleteConfiguredAudienceModelRequest.Builder> deleteConfiguredAudienceModelRequest)`	Deletes the specified configured audience model.
`default DeleteConfiguredAudienceModelResponse`	`deleteConfiguredAudienceModel(DeleteConfiguredAudienceModelRequest deleteConfiguredAudienceModelRequest)`	Deletes the specified configured audience model.
`default DeleteConfiguredAudienceModelPolicyResponse`	`deleteConfiguredAudienceModelPolicy(Consumer<DeleteConfiguredAudienceModelPolicyRequest.Builder> deleteConfiguredAudienceModelPolicyRequest)`	Deletes the specified configured audience model policy.
`default DeleteConfiguredAudienceModelPolicyResponse`	`deleteConfiguredAudienceModelPolicy(DeleteConfiguredAudienceModelPolicyRequest deleteConfiguredAudienceModelPolicyRequest)`	Deletes the specified configured audience model policy.
`default DeleteTrainingDatasetResponse`	`deleteTrainingDataset(Consumer<DeleteTrainingDatasetRequest.Builder> deleteTrainingDatasetRequest)`	Specifies a training dataset that you want to delete.
`default DeleteTrainingDatasetResponse`	`deleteTrainingDataset(DeleteTrainingDatasetRequest deleteTrainingDatasetRequest)`	Specifies a training dataset that you want to delete.
`default GetAudienceGenerationJobResponse`	`getAudienceGenerationJob(Consumer<GetAudienceGenerationJobRequest.Builder> getAudienceGenerationJobRequest)`	Returns information about an audience generation job.
`default GetAudienceGenerationJobResponse`	`getAudienceGenerationJob(GetAudienceGenerationJobRequest getAudienceGenerationJobRequest)`	Returns information about an audience generation job.
`default GetAudienceModelResponse`	`getAudienceModel(Consumer<GetAudienceModelRequest.Builder> getAudienceModelRequest)`	Returns information about an audience model
`default GetAudienceModelResponse`	`getAudienceModel(GetAudienceModelRequest getAudienceModelRequest)`	Returns information about an audience model
`default GetConfiguredAudienceModelResponse`	`getConfiguredAudienceModel(Consumer<GetConfiguredAudienceModelRequest.Builder> getConfiguredAudienceModelRequest)`	Returns information about a specified configured audience model.
`default GetConfiguredAudienceModelResponse`	`getConfiguredAudienceModel(GetConfiguredAudienceModelRequest getConfiguredAudienceModelRequest)`	Returns information about a specified configured audience model.
`default GetConfiguredAudienceModelPolicyResponse`	`getConfiguredAudienceModelPolicy(Consumer<GetConfiguredAudienceModelPolicyRequest.Builder> getConfiguredAudienceModelPolicyRequest)`	Returns information about a configured audience model policy.
`default GetConfiguredAudienceModelPolicyResponse`	`getConfiguredAudienceModelPolicy(GetConfiguredAudienceModelPolicyRequest getConfiguredAudienceModelPolicyRequest)`	Returns information about a configured audience model policy.
`default GetTrainingDatasetResponse`	`getTrainingDataset(Consumer<GetTrainingDatasetRequest.Builder> getTrainingDatasetRequest)`	Returns information about a training dataset.
`default GetTrainingDatasetResponse`	`getTrainingDataset(GetTrainingDatasetRequest getTrainingDatasetRequest)`	Returns information about a training dataset.
`default ListAudienceExportJobsResponse`	`listAudienceExportJobs(Consumer<ListAudienceExportJobsRequest.Builder> listAudienceExportJobsRequest)`	Returns a list of the audience export jobs.
`default ListAudienceExportJobsResponse`	`listAudienceExportJobs(ListAudienceExportJobsRequest listAudienceExportJobsRequest)`	Returns a list of the audience export jobs.
`default ListAudienceExportJobsIterable`	`listAudienceExportJobsPaginator(Consumer<ListAudienceExportJobsRequest.Builder> listAudienceExportJobsRequest)`	Returns a list of the audience export jobs.
`default ListAudienceExportJobsIterable`	`listAudienceExportJobsPaginator(ListAudienceExportJobsRequest listAudienceExportJobsRequest)`	Returns a list of the audience export jobs.
`default ListAudienceGenerationJobsResponse`	`listAudienceGenerationJobs(Consumer<ListAudienceGenerationJobsRequest.Builder> listAudienceGenerationJobsRequest)`	Returns a list of audience generation jobs.
`default ListAudienceGenerationJobsResponse`	`listAudienceGenerationJobs(ListAudienceGenerationJobsRequest listAudienceGenerationJobsRequest)`	Returns a list of audience generation jobs.
`default ListAudienceGenerationJobsIterable`	`listAudienceGenerationJobsPaginator(Consumer<ListAudienceGenerationJobsRequest.Builder> listAudienceGenerationJobsRequest)`	Returns a list of audience generation jobs.
`default ListAudienceGenerationJobsIterable`	`listAudienceGenerationJobsPaginator(ListAudienceGenerationJobsRequest listAudienceGenerationJobsRequest)`	Returns a list of audience generation jobs.
`default ListAudienceModelsResponse`	`listAudienceModels(Consumer<ListAudienceModelsRequest.Builder> listAudienceModelsRequest)`	Returns a list of audience models.
`default ListAudienceModelsResponse`	`listAudienceModels(ListAudienceModelsRequest listAudienceModelsRequest)`	Returns a list of audience models.
`default ListAudienceModelsIterable`	`listAudienceModelsPaginator(Consumer<ListAudienceModelsRequest.Builder> listAudienceModelsRequest)`	Returns a list of audience models.
`default ListAudienceModelsIterable`	`listAudienceModelsPaginator(ListAudienceModelsRequest listAudienceModelsRequest)`	Returns a list of audience models.
`default ListConfiguredAudienceModelsResponse`	`listConfiguredAudienceModels(Consumer<ListConfiguredAudienceModelsRequest.Builder> listConfiguredAudienceModelsRequest)`	Returns a list of the configured audience models.
`default ListConfiguredAudienceModelsResponse`	`listConfiguredAudienceModels(ListConfiguredAudienceModelsRequest listConfiguredAudienceModelsRequest)`	Returns a list of the configured audience models.
`default ListConfiguredAudienceModelsIterable`	`listConfiguredAudienceModelsPaginator(Consumer<ListConfiguredAudienceModelsRequest.Builder> listConfiguredAudienceModelsRequest)`	Returns a list of the configured audience models.
`default ListConfiguredAudienceModelsIterable`	`listConfiguredAudienceModelsPaginator(ListConfiguredAudienceModelsRequest listConfiguredAudienceModelsRequest)`	Returns a list of the configured audience models.
`default ListTagsForResourceResponse`	`listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)`	Returns a list of tags for a provided resource.
`default ListTagsForResourceResponse`	`listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)`	Returns a list of tags for a provided resource.
`default ListTrainingDatasetsResponse`	`listTrainingDatasets(Consumer<ListTrainingDatasetsRequest.Builder> listTrainingDatasetsRequest)`	Returns a list of training datasets.
`default ListTrainingDatasetsResponse`	`listTrainingDatasets(ListTrainingDatasetsRequest listTrainingDatasetsRequest)`	Returns a list of training datasets.
`default ListTrainingDatasetsIterable`	`listTrainingDatasetsPaginator(Consumer<ListTrainingDatasetsRequest.Builder> listTrainingDatasetsRequest)`	Returns a list of training datasets.
`default ListTrainingDatasetsIterable`	`listTrainingDatasetsPaginator(ListTrainingDatasetsRequest listTrainingDatasetsRequest)`	Returns a list of training datasets.
`default PutConfiguredAudienceModelPolicyResponse`	`putConfiguredAudienceModelPolicy(Consumer<PutConfiguredAudienceModelPolicyRequest.Builder> putConfiguredAudienceModelPolicyRequest)`	Create or update the resource policy for a configured audience model.
`default PutConfiguredAudienceModelPolicyResponse`	`putConfiguredAudienceModelPolicy(PutConfiguredAudienceModelPolicyRequest putConfiguredAudienceModelPolicyRequest)`	Create or update the resource policy for a configured audience model.
`default CleanRoomsMlServiceClientConfiguration`	`serviceClientConfiguration()`
`static ServiceMetadata`	`serviceMetadata()`
`default StartAudienceExportJobResponse`	`startAudienceExportJob(Consumer<StartAudienceExportJobRequest.Builder> startAudienceExportJobRequest)`	Export an audience of a specified size after you have generated an audience.
`default StartAudienceExportJobResponse`	`startAudienceExportJob(StartAudienceExportJobRequest startAudienceExportJobRequest)`	Export an audience of a specified size after you have generated an audience.
`default StartAudienceGenerationJobResponse`	`startAudienceGenerationJob(Consumer<StartAudienceGenerationJobRequest.Builder> startAudienceGenerationJobRequest)`	Information necessary to start the audience generation job.
`default StartAudienceGenerationJobResponse`	`startAudienceGenerationJob(StartAudienceGenerationJobRequest startAudienceGenerationJobRequest)`	Information necessary to start the audience generation job.
`default TagResourceResponse`	`tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)`	Adds metadata tags to a specified resource.
`default TagResourceResponse`	`tagResource(TagResourceRequest tagResourceRequest)`	Adds metadata tags to a specified resource.
`default UntagResourceResponse`	`untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)`	Removes metadata tags from a specified resource.
`default UntagResourceResponse`	`untagResource(UntagResourceRequest untagResourceRequest)`	Removes metadata tags from a specified resource.
`default UpdateConfiguredAudienceModelResponse`	`updateConfiguredAudienceModel(Consumer<UpdateConfiguredAudienceModelRequest.Builder> updateConfiguredAudienceModelRequest)`	Provides the information necessary to update a configured audience model.
`default UpdateConfiguredAudienceModelResponse`	`updateConfiguredAudienceModel(UpdateConfiguredAudienceModelRequest updateConfiguredAudienceModelRequest)`	Provides the information necessary to update a configured audience model.

Methods inherited from interface software.amazon.awssdk.utils.SdkAutoCloseable
close

Methods inherited from interface software.amazon.awssdk.core.SdkClient
serviceName

- Field Detail
  - SERVICE_NAME
```
static final String SERVICE_NAME
```
    See Also:
    
    Constant Field Values
  - SERVICE_METADATA_ID
```
static final String SERVICE_METADATA_ID
```
    Value for looking up the service's metadata from the ServiceMetadataProvider.
    
    See Also:
    
    Constant Field Values
- Method Detail
  - createAudienceModel
```
default CreateAudienceModelResponse createAudienceModel(CreateAudienceModelRequest createAudienceModelRequest)
                                                 throws ConflictException,
                                                        ValidationException,
                                                        AccessDeniedException,
                                                        ResourceNotFoundException,
                                                        ServiceQuotaExceededException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        CleanRoomsMlException
```
    Defines the information necessary to create an audience model. An audience model is a machine learning model that Clean Rooms ML trains to measure similarity between users. Clean Rooms ML manages training and storing the audience model. The audience model can be used in multiple calls to the StartAudienceGenerationJob API.
    
    Parameters:
    
    createAudienceModelRequest -
    
    Returns:
    
    Result of the CreateAudienceModel operation returned by the service.
    
    Throws:
    
    ConflictException - A resource with that name already exists in this region.
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    ServiceQuotaExceededException - You have exceeded your service quota.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createAudienceModel
```
default CreateAudienceModelResponse createAudienceModel(Consumer<CreateAudienceModelRequest.Builder> createAudienceModelRequest)
                                                 throws ConflictException,
                                                        ValidationException,
                                                        AccessDeniedException,
                                                        ResourceNotFoundException,
                                                        ServiceQuotaExceededException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        CleanRoomsMlException
```
    Defines the information necessary to create an audience model. An audience model is a machine learning model that Clean Rooms ML trains to measure similarity between users. Clean Rooms ML manages training and storing the audience model. The audience model can be used in multiple calls to the StartAudienceGenerationJob API.
    
    This is a convenience which creates an instance of the CreateAudienceModelRequest.Builder avoiding the need to create one manually via CreateAudienceModelRequest.builder()
    
    Parameters:
    
    createAudienceModelRequest - A Consumer that will call methods on CreateAudienceModelRequest.Builder to create a request.
    
    Returns:
    
    Result of the CreateAudienceModel operation returned by the service.
    
    Throws:
    
    ConflictException - A resource with that name already exists in this region.
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    ServiceQuotaExceededException - You have exceeded your service quota.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createConfiguredAudienceModel
```
default CreateConfiguredAudienceModelResponse createConfiguredAudienceModel(CreateConfiguredAudienceModelRequest createConfiguredAudienceModelRequest)
                                                                     throws ConflictException,
                                                                            ValidationException,
                                                                            AccessDeniedException,
                                                                            ResourceNotFoundException,
                                                                            ServiceQuotaExceededException,
                                                                            AwsServiceException,
                                                                            SdkClientException,
                                                                            CleanRoomsMlException
```
    Defines the information necessary to create a configured audience model.
    
    Parameters:
    
    createConfiguredAudienceModelRequest -
    
    Returns:
    
    Result of the CreateConfiguredAudienceModel operation returned by the service.
    
    Throws:
    
    ConflictException - A resource with that name already exists in this region.
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    ServiceQuotaExceededException - You have exceeded your service quota.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createConfiguredAudienceModel
```
default CreateConfiguredAudienceModelResponse createConfiguredAudienceModel(Consumer<CreateConfiguredAudienceModelRequest.Builder> createConfiguredAudienceModelRequest)
                                                                     throws ConflictException,
                                                                            ValidationException,
                                                                            AccessDeniedException,
                                                                            ResourceNotFoundException,
                                                                            ServiceQuotaExceededException,
                                                                            AwsServiceException,
                                                                            SdkClientException,
                                                                            CleanRoomsMlException
```
    Defines the information necessary to create a configured audience model.
    
    This is a convenience which creates an instance of the CreateConfiguredAudienceModelRequest.Builder avoiding the need to create one manually via CreateConfiguredAudienceModelRequest.builder()
    
    Parameters:
    
    createConfiguredAudienceModelRequest - A Consumer that will call methods on CreateConfiguredAudienceModelRequest.Builder to create a request.
    
    Returns:
    
    Result of the CreateConfiguredAudienceModel operation returned by the service.
    
    Throws:
    
    ConflictException - A resource with that name already exists in this region.
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    ServiceQuotaExceededException - You have exceeded your service quota.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createTrainingDataset
```
default CreateTrainingDatasetResponse createTrainingDataset(CreateTrainingDatasetRequest createTrainingDatasetRequest)
                                                     throws ConflictException,
                                                            ValidationException,
                                                            AccessDeniedException,
                                                            AwsServiceException,
                                                            SdkClientException,
                                                            CleanRoomsMlException
```
    Defines the information necessary to create a training dataset, or seed audience. In Clean Rooms ML, the TrainingDataset is metadata that points to a Glue table, which is read only during AudienceModel creation.
    
    Parameters:
    
    createTrainingDatasetRequest -
    
    Returns:
    
    Result of the CreateTrainingDataset operation returned by the service.
    
    Throws:
    
    ConflictException - A resource with that name already exists in this region.
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createTrainingDataset
```
default CreateTrainingDatasetResponse createTrainingDataset(Consumer<CreateTrainingDatasetRequest.Builder> createTrainingDatasetRequest)
                                                     throws ConflictException,
                                                            ValidationException,
                                                            AccessDeniedException,
                                                            AwsServiceException,
                                                            SdkClientException,
                                                            CleanRoomsMlException
```
    Defines the information necessary to create a training dataset, or seed audience. In Clean Rooms ML, the TrainingDataset is metadata that points to a Glue table, which is read only during AudienceModel creation.
    
    This is a convenience which creates an instance of the CreateTrainingDatasetRequest.Builder avoiding the need to create one manually via CreateTrainingDatasetRequest.builder()
    
    Parameters:
    
    createTrainingDatasetRequest - A Consumer that will call methods on CreateTrainingDatasetRequest.Builder to create a request.
    
    Returns:
    
    Result of the CreateTrainingDataset operation returned by the service.
    
    Throws:
    
    ConflictException - A resource with that name already exists in this region.
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteAudienceGenerationJob
```
default DeleteAudienceGenerationJobResponse deleteAudienceGenerationJob(DeleteAudienceGenerationJobRequest deleteAudienceGenerationJobRequest)
                                                                 throws ConflictException,
                                                                        ValidationException,
                                                                        AccessDeniedException,
                                                                        ResourceNotFoundException,
                                                                        AwsServiceException,
                                                                        SdkClientException,
                                                                        CleanRoomsMlException
```
    Deletes the specified audience generation job, and removes all data associated with the job.
    
    Parameters:
    
    deleteAudienceGenerationJobRequest -
    
    Returns:
    
    Result of the DeleteAudienceGenerationJob operation returned by the service.
    
    Throws:
    
    ConflictException - A resource with that name already exists in this region.
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteAudienceGenerationJob
```
default DeleteAudienceGenerationJobResponse deleteAudienceGenerationJob(Consumer<DeleteAudienceGenerationJobRequest.Builder> deleteAudienceGenerationJobRequest)
                                                                 throws ConflictException,
                                                                        ValidationException,
                                                                        AccessDeniedException,
                                                                        ResourceNotFoundException,
                                                                        AwsServiceException,
                                                                        SdkClientException,
                                                                        CleanRoomsMlException
```
    Deletes the specified audience generation job, and removes all data associated with the job.
    
    This is a convenience which creates an instance of the DeleteAudienceGenerationJobRequest.Builder avoiding the need to create one manually via DeleteAudienceGenerationJobRequest.builder()
    
    Parameters:
    
    deleteAudienceGenerationJobRequest - A Consumer that will call methods on DeleteAudienceGenerationJobRequest.Builder to create a request.
    
    Returns:
    
    Result of the DeleteAudienceGenerationJob operation returned by the service.
    
    Throws:
    
    ConflictException - A resource with that name already exists in this region.
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteAudienceModel
```
default DeleteAudienceModelResponse deleteAudienceModel(DeleteAudienceModelRequest deleteAudienceModelRequest)
                                                 throws ConflictException,
                                                        ValidationException,
                                                        AccessDeniedException,
                                                        ResourceNotFoundException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        CleanRoomsMlException
```
    Specifies an audience model that you want to delete. You can't delete an audience model if there are any configured audience models that depend on the audience model.
    
    Parameters:
    
    deleteAudienceModelRequest -
    
    Returns:
    
    Result of the DeleteAudienceModel operation returned by the service.
    
    Throws:
    
    ConflictException - A resource with that name already exists in this region.
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteAudienceModel
```
default DeleteAudienceModelResponse deleteAudienceModel(Consumer<DeleteAudienceModelRequest.Builder> deleteAudienceModelRequest)
                                                 throws ConflictException,
                                                        ValidationException,
                                                        AccessDeniedException,
                                                        ResourceNotFoundException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        CleanRoomsMlException
```
    Specifies an audience model that you want to delete. You can't delete an audience model if there are any configured audience models that depend on the audience model.
    
    This is a convenience which creates an instance of the DeleteAudienceModelRequest.Builder avoiding the need to create one manually via DeleteAudienceModelRequest.builder()
    
    Parameters:
    
    deleteAudienceModelRequest - A Consumer that will call methods on DeleteAudienceModelRequest.Builder to create a request.
    
    Returns:
    
    Result of the DeleteAudienceModel operation returned by the service.
    
    Throws:
    
    ConflictException - A resource with that name already exists in this region.
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteConfiguredAudienceModel
```
default DeleteConfiguredAudienceModelResponse deleteConfiguredAudienceModel(DeleteConfiguredAudienceModelRequest deleteConfiguredAudienceModelRequest)
                                                                     throws ConflictException,
                                                                            ValidationException,
                                                                            AccessDeniedException,
                                                                            ResourceNotFoundException,
                                                                            AwsServiceException,
                                                                            SdkClientException,
                                                                            CleanRoomsMlException
```
    Deletes the specified configured audience model. You can't delete a configured audience model if there are any lookalike models that use the configured audience model. If you delete a configured audience model, it will be removed from any collaborations that it is associated to.
    
    Parameters:
    
    deleteConfiguredAudienceModelRequest -
    
    Returns:
    
    Result of the DeleteConfiguredAudienceModel operation returned by the service.
    
    Throws:
    
    ConflictException - A resource with that name already exists in this region.
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteConfiguredAudienceModel
```
default DeleteConfiguredAudienceModelResponse deleteConfiguredAudienceModel(Consumer<DeleteConfiguredAudienceModelRequest.Builder> deleteConfiguredAudienceModelRequest)
                                                                     throws ConflictException,
                                                                            ValidationException,
                                                                            AccessDeniedException,
                                                                            ResourceNotFoundException,
                                                                            AwsServiceException,
                                                                            SdkClientException,
                                                                            CleanRoomsMlException
```
    Deletes the specified configured audience model. You can't delete a configured audience model if there are any lookalike models that use the configured audience model. If you delete a configured audience model, it will be removed from any collaborations that it is associated to.
    
    This is a convenience which creates an instance of the DeleteConfiguredAudienceModelRequest.Builder avoiding the need to create one manually via DeleteConfiguredAudienceModelRequest.builder()
    
    Parameters:
    
    deleteConfiguredAudienceModelRequest - A Consumer that will call methods on DeleteConfiguredAudienceModelRequest.Builder to create a request.
    
    Returns:
    
    Result of the DeleteConfiguredAudienceModel operation returned by the service.
    
    Throws:
    
    ConflictException - A resource with that name already exists in this region.
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteConfiguredAudienceModelPolicy
```
default DeleteConfiguredAudienceModelPolicyResponse deleteConfiguredAudienceModelPolicy(DeleteConfiguredAudienceModelPolicyRequest deleteConfiguredAudienceModelPolicyRequest)
                                                                                 throws ValidationException,
                                                                                        AccessDeniedException,
                                                                                        ResourceNotFoundException,
                                                                                        AwsServiceException,
                                                                                        SdkClientException,
                                                                                        CleanRoomsMlException
```
    Deletes the specified configured audience model policy.
    
    Parameters:
    
    deleteConfiguredAudienceModelPolicyRequest -
    
    Returns:
    
    Result of the DeleteConfiguredAudienceModelPolicy operation returned by the service.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteConfiguredAudienceModelPolicy
```
default DeleteConfiguredAudienceModelPolicyResponse deleteConfiguredAudienceModelPolicy(Consumer<DeleteConfiguredAudienceModelPolicyRequest.Builder> deleteConfiguredAudienceModelPolicyRequest)
                                                                                 throws ValidationException,
                                                                                        AccessDeniedException,
                                                                                        ResourceNotFoundException,
                                                                                        AwsServiceException,
                                                                                        SdkClientException,
                                                                                        CleanRoomsMlException
```
    Deletes the specified configured audience model policy.
    
    This is a convenience which creates an instance of the DeleteConfiguredAudienceModelPolicyRequest.Builder avoiding the need to create one manually via DeleteConfiguredAudienceModelPolicyRequest.builder()
    
    Parameters:
    
    deleteConfiguredAudienceModelPolicyRequest - A Consumer that will call methods on DeleteConfiguredAudienceModelPolicyRequest.Builder to create a request.
    
    Returns:
    
    Result of the DeleteConfiguredAudienceModelPolicy operation returned by the service.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteTrainingDataset
```
default DeleteTrainingDatasetResponse deleteTrainingDataset(DeleteTrainingDatasetRequest deleteTrainingDatasetRequest)
                                                     throws ConflictException,
                                                            ValidationException,
                                                            AccessDeniedException,
                                                            ResourceNotFoundException,
                                                            AwsServiceException,
                                                            SdkClientException,
                                                            CleanRoomsMlException
```
    Specifies a training dataset that you want to delete. You can't delete a training dataset if there are any audience models that depend on the training dataset. In Clean Rooms ML, the TrainingDataset is metadata that points to a Glue table, which is read only during AudienceModel creation. This action deletes the metadata.
    
    Parameters:
    
    deleteTrainingDatasetRequest -
    
    Returns:
    
    Result of the DeleteTrainingDataset operation returned by the service.
    
    Throws:
    
    ConflictException - A resource with that name already exists in this region.
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteTrainingDataset
```
default DeleteTrainingDatasetResponse deleteTrainingDataset(Consumer<DeleteTrainingDatasetRequest.Builder> deleteTrainingDatasetRequest)
                                                     throws ConflictException,
                                                            ValidationException,
                                                            AccessDeniedException,
                                                            ResourceNotFoundException,
                                                            AwsServiceException,
                                                            SdkClientException,
                                                            CleanRoomsMlException
```
    Specifies a training dataset that you want to delete. You can't delete a training dataset if there are any audience models that depend on the training dataset. In Clean Rooms ML, the TrainingDataset is metadata that points to a Glue table, which is read only during AudienceModel creation. This action deletes the metadata.
    
    This is a convenience which creates an instance of the DeleteTrainingDatasetRequest.Builder avoiding the need to create one manually via DeleteTrainingDatasetRequest.builder()
    
    Parameters:
    
    deleteTrainingDatasetRequest - A Consumer that will call methods on DeleteTrainingDatasetRequest.Builder to create a request.
    
    Returns:
    
    Result of the DeleteTrainingDataset operation returned by the service.
    
    Throws:
    
    ConflictException - A resource with that name already exists in this region.
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getAudienceGenerationJob
```
default GetAudienceGenerationJobResponse getAudienceGenerationJob(GetAudienceGenerationJobRequest getAudienceGenerationJobRequest)
                                                           throws ValidationException,
                                                                  AccessDeniedException,
                                                                  ResourceNotFoundException,
                                                                  AwsServiceException,
                                                                  SdkClientException,
                                                                  CleanRoomsMlException
```
    Returns information about an audience generation job.
    
    Parameters:
    
    getAudienceGenerationJobRequest -
    
    Returns:
    
    Result of the GetAudienceGenerationJob operation returned by the service.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getAudienceGenerationJob
```
default GetAudienceGenerationJobResponse getAudienceGenerationJob(Consumer<GetAudienceGenerationJobRequest.Builder> getAudienceGenerationJobRequest)
                                                           throws ValidationException,
                                                                  AccessDeniedException,
                                                                  ResourceNotFoundException,
                                                                  AwsServiceException,
                                                                  SdkClientException,
                                                                  CleanRoomsMlException
```
    Returns information about an audience generation job.
    
    This is a convenience which creates an instance of the GetAudienceGenerationJobRequest.Builder avoiding the need to create one manually via GetAudienceGenerationJobRequest.builder()
    
    Parameters:
    
    getAudienceGenerationJobRequest - A Consumer that will call methods on GetAudienceGenerationJobRequest.Builder to create a request.
    
    Returns:
    
    Result of the GetAudienceGenerationJob operation returned by the service.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getAudienceModel
```
default GetAudienceModelResponse getAudienceModel(GetAudienceModelRequest getAudienceModelRequest)
                                           throws ValidationException,
                                                  AccessDeniedException,
                                                  ResourceNotFoundException,
                                                  AwsServiceException,
                                                  SdkClientException,
                                                  CleanRoomsMlException
```
    Returns information about an audience model
    
    Parameters:
    
    getAudienceModelRequest -
    
    Returns:
    
    Result of the GetAudienceModel operation returned by the service.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getAudienceModel
```
default GetAudienceModelResponse getAudienceModel(Consumer<GetAudienceModelRequest.Builder> getAudienceModelRequest)
                                           throws ValidationException,
                                                  AccessDeniedException,
                                                  ResourceNotFoundException,
                                                  AwsServiceException,
                                                  SdkClientException,
                                                  CleanRoomsMlException
```
    Returns information about an audience model
    
    This is a convenience which creates an instance of the GetAudienceModelRequest.Builder avoiding the need to create one manually via GetAudienceModelRequest.builder()
    
    Parameters:
    
    getAudienceModelRequest - A Consumer that will call methods on GetAudienceModelRequest.Builder to create a request.
    
    Returns:
    
    Result of the GetAudienceModel operation returned by the service.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getConfiguredAudienceModel
```
default GetConfiguredAudienceModelResponse getConfiguredAudienceModel(GetConfiguredAudienceModelRequest getConfiguredAudienceModelRequest)
                                                               throws ValidationException,
                                                                      AccessDeniedException,
                                                                      ResourceNotFoundException,
                                                                      AwsServiceException,
                                                                      SdkClientException,
                                                                      CleanRoomsMlException
```
    Returns information about a specified configured audience model.
    
    Parameters:
    
    getConfiguredAudienceModelRequest -
    
    Returns:
    
    Result of the GetConfiguredAudienceModel operation returned by the service.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getConfiguredAudienceModel
```
default GetConfiguredAudienceModelResponse getConfiguredAudienceModel(Consumer<GetConfiguredAudienceModelRequest.Builder> getConfiguredAudienceModelRequest)
                                                               throws ValidationException,
                                                                      AccessDeniedException,
                                                                      ResourceNotFoundException,
                                                                      AwsServiceException,
                                                                      SdkClientException,
                                                                      CleanRoomsMlException
```
    Returns information about a specified configured audience model.
    
    This is a convenience which creates an instance of the GetConfiguredAudienceModelRequest.Builder avoiding the need to create one manually via GetConfiguredAudienceModelRequest.builder()
    
    Parameters:
    
    getConfiguredAudienceModelRequest - A Consumer that will call methods on GetConfiguredAudienceModelRequest.Builder to create a request.
    
    Returns:
    
    Result of the GetConfiguredAudienceModel operation returned by the service.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getConfiguredAudienceModelPolicy
```
default GetConfiguredAudienceModelPolicyResponse getConfiguredAudienceModelPolicy(GetConfiguredAudienceModelPolicyRequest getConfiguredAudienceModelPolicyRequest)
                                                                           throws ValidationException,
                                                                                  AccessDeniedException,
                                                                                  ResourceNotFoundException,
                                                                                  AwsServiceException,
                                                                                  SdkClientException,
                                                                                  CleanRoomsMlException
```
    Returns information about a configured audience model policy.
    
    Parameters:
    
    getConfiguredAudienceModelPolicyRequest -
    
    Returns:
    
    Result of the GetConfiguredAudienceModelPolicy operation returned by the service.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getConfiguredAudienceModelPolicy
```
default GetConfiguredAudienceModelPolicyResponse getConfiguredAudienceModelPolicy(Consumer<GetConfiguredAudienceModelPolicyRequest.Builder> getConfiguredAudienceModelPolicyRequest)
                                                                           throws ValidationException,
                                                                                  AccessDeniedException,
                                                                                  ResourceNotFoundException,
                                                                                  AwsServiceException,
                                                                                  SdkClientException,
                                                                                  CleanRoomsMlException
```
    Returns information about a configured audience model policy.
    
    This is a convenience which creates an instance of the GetConfiguredAudienceModelPolicyRequest.Builder avoiding the need to create one manually via GetConfiguredAudienceModelPolicyRequest.builder()
    
    Parameters:
    
    getConfiguredAudienceModelPolicyRequest - A Consumer that will call methods on GetConfiguredAudienceModelPolicyRequest.Builder to create a request.
    
    Returns:
    
    Result of the GetConfiguredAudienceModelPolicy operation returned by the service.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getTrainingDataset
```
default GetTrainingDatasetResponse getTrainingDataset(GetTrainingDatasetRequest getTrainingDatasetRequest)
                                               throws ValidationException,
                                                      AccessDeniedException,
                                                      ResourceNotFoundException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      CleanRoomsMlException
```
    Returns information about a training dataset.
    
    Parameters:
    
    getTrainingDatasetRequest -
    
    Returns:
    
    Result of the GetTrainingDataset operation returned by the service.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getTrainingDataset
```
default GetTrainingDatasetResponse getTrainingDataset(Consumer<GetTrainingDatasetRequest.Builder> getTrainingDatasetRequest)
                                               throws ValidationException,
                                                      AccessDeniedException,
                                                      ResourceNotFoundException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      CleanRoomsMlException
```
    Returns information about a training dataset.
    
    This is a convenience which creates an instance of the GetTrainingDatasetRequest.Builder avoiding the need to create one manually via GetTrainingDatasetRequest.builder()
    
    Parameters:
    
    getTrainingDatasetRequest - A Consumer that will call methods on GetTrainingDatasetRequest.Builder to create a request.
    
    Returns:
    
    Result of the GetTrainingDataset operation returned by the service.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAudienceExportJobs
```
default ListAudienceExportJobsResponse listAudienceExportJobs(ListAudienceExportJobsRequest listAudienceExportJobsRequest)
                                                       throws ValidationException,
                                                              AccessDeniedException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              CleanRoomsMlException
```
    Returns a list of the audience export jobs.
    
    Parameters:
    
    listAudienceExportJobsRequest -
    
    Returns:
    
    Result of the ListAudienceExportJobs operation returned by the service.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAudienceExportJobs
```
default ListAudienceExportJobsResponse listAudienceExportJobs(Consumer<ListAudienceExportJobsRequest.Builder> listAudienceExportJobsRequest)
                                                       throws ValidationException,
                                                              AccessDeniedException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              CleanRoomsMlException
```
    Returns a list of the audience export jobs.
    
    This is a convenience which creates an instance of the ListAudienceExportJobsRequest.Builder avoiding the need to create one manually via ListAudienceExportJobsRequest.builder()
    
    Parameters:
    
    listAudienceExportJobsRequest - A Consumer that will call methods on ListAudienceExportJobsRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListAudienceExportJobs operation returned by the service.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAudienceExportJobsPaginator
```
default ListAudienceExportJobsIterable listAudienceExportJobsPaginator(ListAudienceExportJobsRequest listAudienceExportJobsRequest)
                                                                throws ValidationException,
                                                                       AccessDeniedException,
                                                                       AwsServiceException,
                                                                       SdkClientException,
                                                                       CleanRoomsMlException
```
    Returns a list of the audience export jobs.
    
    This is a variant of listAudienceExportJobs(software.amazon.awssdk.services.cleanroomsml.model.ListAudienceExportJobsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.cleanroomsml.paginators.ListAudienceExportJobsIterable responses = client.listAudienceExportJobsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.cleanroomsml.paginators.ListAudienceExportJobsIterable responses = client .listAudienceExportJobsPaginator(request); for (software.amazon.awssdk.services.cleanroomsml.model.ListAudienceExportJobsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.cleanroomsml.paginators.ListAudienceExportJobsIterable responses = client.listAudienceExportJobsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listAudienceExportJobs(software.amazon.awssdk.services.cleanroomsml.model.ListAudienceExportJobsRequest) operation.
    Parameters:
    
    listAudienceExportJobsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAudienceExportJobsPaginator
```
default ListAudienceExportJobsIterable listAudienceExportJobsPaginator(Consumer<ListAudienceExportJobsRequest.Builder> listAudienceExportJobsRequest)
                                                                throws ValidationException,
                                                                       AccessDeniedException,
                                                                       AwsServiceException,
                                                                       SdkClientException,
                                                                       CleanRoomsMlException
```
    Returns a list of the audience export jobs.
    
    This is a variant of listAudienceExportJobs(software.amazon.awssdk.services.cleanroomsml.model.ListAudienceExportJobsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.cleanroomsml.paginators.ListAudienceExportJobsIterable responses = client.listAudienceExportJobsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.cleanroomsml.paginators.ListAudienceExportJobsIterable responses = client .listAudienceExportJobsPaginator(request); for (software.amazon.awssdk.services.cleanroomsml.model.ListAudienceExportJobsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.cleanroomsml.paginators.ListAudienceExportJobsIterable responses = client.listAudienceExportJobsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listAudienceExportJobs(software.amazon.awssdk.services.cleanroomsml.model.ListAudienceExportJobsRequest) operation.
    
    This is a convenience which creates an instance of the ListAudienceExportJobsRequest.Builder avoiding the need to create one manually via ListAudienceExportJobsRequest.builder()
    Parameters:
    
    listAudienceExportJobsRequest - A Consumer that will call methods on ListAudienceExportJobsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAudienceGenerationJobs
```
default ListAudienceGenerationJobsResponse listAudienceGenerationJobs(ListAudienceGenerationJobsRequest listAudienceGenerationJobsRequest)
                                                               throws ValidationException,
                                                                      AccessDeniedException,
                                                                      AwsServiceException,
                                                                      SdkClientException,
                                                                      CleanRoomsMlException
```
    Returns a list of audience generation jobs.
    
    Parameters:
    
    listAudienceGenerationJobsRequest -
    
    Returns:
    
    Result of the ListAudienceGenerationJobs operation returned by the service.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAudienceGenerationJobs
```
default ListAudienceGenerationJobsResponse listAudienceGenerationJobs(Consumer<ListAudienceGenerationJobsRequest.Builder> listAudienceGenerationJobsRequest)
                                                               throws ValidationException,
                                                                      AccessDeniedException,
                                                                      AwsServiceException,
                                                                      SdkClientException,
                                                                      CleanRoomsMlException
```
    Returns a list of audience generation jobs.
    
    This is a convenience which creates an instance of the ListAudienceGenerationJobsRequest.Builder avoiding the need to create one manually via ListAudienceGenerationJobsRequest.builder()
    
    Parameters:
    
    listAudienceGenerationJobsRequest - A Consumer that will call methods on ListAudienceGenerationJobsRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListAudienceGenerationJobs operation returned by the service.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAudienceGenerationJobsPaginator
```
default ListAudienceGenerationJobsIterable listAudienceGenerationJobsPaginator(ListAudienceGenerationJobsRequest listAudienceGenerationJobsRequest)
                                                                        throws ValidationException,
                                                                               AccessDeniedException,
                                                                               AwsServiceException,
                                                                               SdkClientException,
                                                                               CleanRoomsMlException
```
    Returns a list of audience generation jobs.
    
    This is a variant of listAudienceGenerationJobs(software.amazon.awssdk.services.cleanroomsml.model.ListAudienceGenerationJobsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.cleanroomsml.paginators.ListAudienceGenerationJobsIterable responses = client.listAudienceGenerationJobsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.cleanroomsml.paginators.ListAudienceGenerationJobsIterable responses = client .listAudienceGenerationJobsPaginator(request); for (software.amazon.awssdk.services.cleanroomsml.model.ListAudienceGenerationJobsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.cleanroomsml.paginators.ListAudienceGenerationJobsIterable responses = client.listAudienceGenerationJobsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listAudienceGenerationJobs(software.amazon.awssdk.services.cleanroomsml.model.ListAudienceGenerationJobsRequest) operation.
    Parameters:
    
    listAudienceGenerationJobsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAudienceGenerationJobsPaginator
```
default ListAudienceGenerationJobsIterable listAudienceGenerationJobsPaginator(Consumer<ListAudienceGenerationJobsRequest.Builder> listAudienceGenerationJobsRequest)
                                                                        throws ValidationException,
                                                                               AccessDeniedException,
                                                                               AwsServiceException,
                                                                               SdkClientException,
                                                                               CleanRoomsMlException
```
    Returns a list of audience generation jobs.
    
    This is a variant of listAudienceGenerationJobs(software.amazon.awssdk.services.cleanroomsml.model.ListAudienceGenerationJobsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.cleanroomsml.paginators.ListAudienceGenerationJobsIterable responses = client.listAudienceGenerationJobsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.cleanroomsml.paginators.ListAudienceGenerationJobsIterable responses = client .listAudienceGenerationJobsPaginator(request); for (software.amazon.awssdk.services.cleanroomsml.model.ListAudienceGenerationJobsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.cleanroomsml.paginators.ListAudienceGenerationJobsIterable responses = client.listAudienceGenerationJobsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listAudienceGenerationJobs(software.amazon.awssdk.services.cleanroomsml.model.ListAudienceGenerationJobsRequest) operation.
    
    This is a convenience which creates an instance of the ListAudienceGenerationJobsRequest.Builder avoiding the need to create one manually via ListAudienceGenerationJobsRequest.builder()
    Parameters:
    
    listAudienceGenerationJobsRequest - A Consumer that will call methods on ListAudienceGenerationJobsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAudienceModels
```
default ListAudienceModelsResponse listAudienceModels(ListAudienceModelsRequest listAudienceModelsRequest)
                                               throws ValidationException,
                                                      AccessDeniedException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      CleanRoomsMlException
```
    Returns a list of audience models.
    
    Parameters:
    
    listAudienceModelsRequest -
    
    Returns:
    
    Result of the ListAudienceModels operation returned by the service.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAudienceModels
```
default ListAudienceModelsResponse listAudienceModels(Consumer<ListAudienceModelsRequest.Builder> listAudienceModelsRequest)
                                               throws ValidationException,
                                                      AccessDeniedException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      CleanRoomsMlException
```
    Returns a list of audience models.
    
    This is a convenience which creates an instance of the ListAudienceModelsRequest.Builder avoiding the need to create one manually via ListAudienceModelsRequest.builder()
    
    Parameters:
    
    listAudienceModelsRequest - A Consumer that will call methods on ListAudienceModelsRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListAudienceModels operation returned by the service.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAudienceModelsPaginator
```
default ListAudienceModelsIterable listAudienceModelsPaginator(ListAudienceModelsRequest listAudienceModelsRequest)
                                                        throws ValidationException,
                                                               AccessDeniedException,
                                                               AwsServiceException,
                                                               SdkClientException,
                                                               CleanRoomsMlException
```
    Returns a list of audience models.
    
    This is a variant of listAudienceModels(software.amazon.awssdk.services.cleanroomsml.model.ListAudienceModelsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.cleanroomsml.paginators.ListAudienceModelsIterable responses = client.listAudienceModelsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.cleanroomsml.paginators.ListAudienceModelsIterable responses = client .listAudienceModelsPaginator(request); for (software.amazon.awssdk.services.cleanroomsml.model.ListAudienceModelsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.cleanroomsml.paginators.ListAudienceModelsIterable responses = client.listAudienceModelsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listAudienceModels(software.amazon.awssdk.services.cleanroomsml.model.ListAudienceModelsRequest) operation.
    Parameters:
    
    listAudienceModelsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAudienceModelsPaginator
```
default ListAudienceModelsIterable listAudienceModelsPaginator(Consumer<ListAudienceModelsRequest.Builder> listAudienceModelsRequest)
                                                        throws ValidationException,
                                                               AccessDeniedException,
                                                               AwsServiceException,
                                                               SdkClientException,
                                                               CleanRoomsMlException
```
    Returns a list of audience models.
    
    This is a variant of listAudienceModels(software.amazon.awssdk.services.cleanroomsml.model.ListAudienceModelsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.cleanroomsml.paginators.ListAudienceModelsIterable responses = client.listAudienceModelsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.cleanroomsml.paginators.ListAudienceModelsIterable responses = client .listAudienceModelsPaginator(request); for (software.amazon.awssdk.services.cleanroomsml.model.ListAudienceModelsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.cleanroomsml.paginators.ListAudienceModelsIterable responses = client.listAudienceModelsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listAudienceModels(software.amazon.awssdk.services.cleanroomsml.model.ListAudienceModelsRequest) operation.
    
    This is a convenience which creates an instance of the ListAudienceModelsRequest.Builder avoiding the need to create one manually via ListAudienceModelsRequest.builder()
    Parameters:
    
    listAudienceModelsRequest - A Consumer that will call methods on ListAudienceModelsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listConfiguredAudienceModels
```
default ListConfiguredAudienceModelsResponse listConfiguredAudienceModels(ListConfiguredAudienceModelsRequest listConfiguredAudienceModelsRequest)
                                                                   throws ValidationException,
                                                                          AccessDeniedException,
                                                                          AwsServiceException,
                                                                          SdkClientException,
                                                                          CleanRoomsMlException
```
    Returns a list of the configured audience models.
    
    Parameters:
    
    listConfiguredAudienceModelsRequest -
    
    Returns:
    
    Result of the ListConfiguredAudienceModels operation returned by the service.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listConfiguredAudienceModels
```
default ListConfiguredAudienceModelsResponse listConfiguredAudienceModels(Consumer<ListConfiguredAudienceModelsRequest.Builder> listConfiguredAudienceModelsRequest)
                                                                   throws ValidationException,
                                                                          AccessDeniedException,
                                                                          AwsServiceException,
                                                                          SdkClientException,
                                                                          CleanRoomsMlException
```
    Returns a list of the configured audience models.
    
    This is a convenience which creates an instance of the ListConfiguredAudienceModelsRequest.Builder avoiding the need to create one manually via ListConfiguredAudienceModelsRequest.builder()
    
    Parameters:
    
    listConfiguredAudienceModelsRequest - A Consumer that will call methods on ListConfiguredAudienceModelsRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListConfiguredAudienceModels operation returned by the service.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listConfiguredAudienceModelsPaginator
```
default ListConfiguredAudienceModelsIterable listConfiguredAudienceModelsPaginator(ListConfiguredAudienceModelsRequest listConfiguredAudienceModelsRequest)
                                                                            throws ValidationException,
                                                                                   AccessDeniedException,
                                                                                   AwsServiceException,
                                                                                   SdkClientException,
                                                                                   CleanRoomsMlException
```
    Returns a list of the configured audience models.
    
    This is a variant of listConfiguredAudienceModels(software.amazon.awssdk.services.cleanroomsml.model.ListConfiguredAudienceModelsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.cleanroomsml.paginators.ListConfiguredAudienceModelsIterable responses = client.listConfiguredAudienceModelsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.cleanroomsml.paginators.ListConfiguredAudienceModelsIterable responses = client .listConfiguredAudienceModelsPaginator(request); for (software.amazon.awssdk.services.cleanroomsml.model.ListConfiguredAudienceModelsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.cleanroomsml.paginators.ListConfiguredAudienceModelsIterable responses = client.listConfiguredAudienceModelsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listConfiguredAudienceModels(software.amazon.awssdk.services.cleanroomsml.model.ListConfiguredAudienceModelsRequest) operation.
    Parameters:
    
    listConfiguredAudienceModelsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listConfiguredAudienceModelsPaginator
```
default ListConfiguredAudienceModelsIterable listConfiguredAudienceModelsPaginator(Consumer<ListConfiguredAudienceModelsRequest.Builder> listConfiguredAudienceModelsRequest)
                                                                            throws ValidationException,
                                                                                   AccessDeniedException,
                                                                                   AwsServiceException,
                                                                                   SdkClientException,
                                                                                   CleanRoomsMlException
```
    Returns a list of the configured audience models.
    
    This is a variant of listConfiguredAudienceModels(software.amazon.awssdk.services.cleanroomsml.model.ListConfiguredAudienceModelsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.cleanroomsml.paginators.ListConfiguredAudienceModelsIterable responses = client.listConfiguredAudienceModelsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.cleanroomsml.paginators.ListConfiguredAudienceModelsIterable responses = client .listConfiguredAudienceModelsPaginator(request); for (software.amazon.awssdk.services.cleanroomsml.model.ListConfiguredAudienceModelsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.cleanroomsml.paginators.ListConfiguredAudienceModelsIterable responses = client.listConfiguredAudienceModelsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listConfiguredAudienceModels(software.amazon.awssdk.services.cleanroomsml.model.ListConfiguredAudienceModelsRequest) operation.
    
    This is a convenience which creates an instance of the ListConfiguredAudienceModelsRequest.Builder avoiding the need to create one manually via ListConfiguredAudienceModelsRequest.builder()
    Parameters:
    
    listConfiguredAudienceModelsRequest - A Consumer that will call methods on ListConfiguredAudienceModelsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listTagsForResource
```
default ListTagsForResourceResponse listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)
                                                 throws ValidationException,
                                                        AccessDeniedException,
                                                        ResourceNotFoundException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        CleanRoomsMlException
```
    Returns a list of tags for a provided resource.
    
    Parameters:
    
    listTagsForResourceRequest -
    
    Returns:
    
    Result of the ListTagsForResource operation returned by the service.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listTagsForResource
```
default ListTagsForResourceResponse listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)
                                                 throws ValidationException,
                                                        AccessDeniedException,
                                                        ResourceNotFoundException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        CleanRoomsMlException
```
    Returns a list of tags for a provided resource.
    
    This is a convenience which creates an instance of the ListTagsForResourceRequest.Builder avoiding the need to create one manually via ListTagsForResourceRequest.builder()
    
    Parameters:
    
    listTagsForResourceRequest - A Consumer that will call methods on ListTagsForResourceRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListTagsForResource operation returned by the service.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listTrainingDatasets
```
default ListTrainingDatasetsResponse listTrainingDatasets(ListTrainingDatasetsRequest listTrainingDatasetsRequest)
                                                   throws ValidationException,
                                                          AccessDeniedException,
                                                          AwsServiceException,
                                                          SdkClientException,
                                                          CleanRoomsMlException
```
    Returns a list of training datasets.
    
    Parameters:
    
    listTrainingDatasetsRequest -
    
    Returns:
    
    Result of the ListTrainingDatasets operation returned by the service.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listTrainingDatasets
```
default ListTrainingDatasetsResponse listTrainingDatasets(Consumer<ListTrainingDatasetsRequest.Builder> listTrainingDatasetsRequest)
                                                   throws ValidationException,
                                                          AccessDeniedException,
                                                          AwsServiceException,
                                                          SdkClientException,
                                                          CleanRoomsMlException
```
    Returns a list of training datasets.
    
    This is a convenience which creates an instance of the ListTrainingDatasetsRequest.Builder avoiding the need to create one manually via ListTrainingDatasetsRequest.builder()
    
    Parameters:
    
    listTrainingDatasetsRequest - A Consumer that will call methods on ListTrainingDatasetsRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListTrainingDatasets operation returned by the service.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listTrainingDatasetsPaginator
```
default ListTrainingDatasetsIterable listTrainingDatasetsPaginator(ListTrainingDatasetsRequest listTrainingDatasetsRequest)
                                                            throws ValidationException,
                                                                   AccessDeniedException,
                                                                   AwsServiceException,
                                                                   SdkClientException,
                                                                   CleanRoomsMlException
```
    Returns a list of training datasets.
    
    This is a variant of listTrainingDatasets(software.amazon.awssdk.services.cleanroomsml.model.ListTrainingDatasetsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.cleanroomsml.paginators.ListTrainingDatasetsIterable responses = client.listTrainingDatasetsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.cleanroomsml.paginators.ListTrainingDatasetsIterable responses = client .listTrainingDatasetsPaginator(request); for (software.amazon.awssdk.services.cleanroomsml.model.ListTrainingDatasetsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.cleanroomsml.paginators.ListTrainingDatasetsIterable responses = client.listTrainingDatasetsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listTrainingDatasets(software.amazon.awssdk.services.cleanroomsml.model.ListTrainingDatasetsRequest) operation.
    Parameters:
    
    listTrainingDatasetsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listTrainingDatasetsPaginator
```
default ListTrainingDatasetsIterable listTrainingDatasetsPaginator(Consumer<ListTrainingDatasetsRequest.Builder> listTrainingDatasetsRequest)
                                                            throws ValidationException,
                                                                   AccessDeniedException,
                                                                   AwsServiceException,
                                                                   SdkClientException,
                                                                   CleanRoomsMlException
```
    Returns a list of training datasets.
    
    This is a variant of listTrainingDatasets(software.amazon.awssdk.services.cleanroomsml.model.ListTrainingDatasetsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.cleanroomsml.paginators.ListTrainingDatasetsIterable responses = client.listTrainingDatasetsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.cleanroomsml.paginators.ListTrainingDatasetsIterable responses = client .listTrainingDatasetsPaginator(request); for (software.amazon.awssdk.services.cleanroomsml.model.ListTrainingDatasetsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.cleanroomsml.paginators.ListTrainingDatasetsIterable responses = client.listTrainingDatasetsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listTrainingDatasets(software.amazon.awssdk.services.cleanroomsml.model.ListTrainingDatasetsRequest) operation.
    
    This is a convenience which creates an instance of the ListTrainingDatasetsRequest.Builder avoiding the need to create one manually via ListTrainingDatasetsRequest.builder()
    Parameters:
    
    listTrainingDatasetsRequest - A Consumer that will call methods on ListTrainingDatasetsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - putConfiguredAudienceModelPolicy
```
default PutConfiguredAudienceModelPolicyResponse putConfiguredAudienceModelPolicy(PutConfiguredAudienceModelPolicyRequest putConfiguredAudienceModelPolicyRequest)
                                                                           throws ValidationException,
                                                                                  AccessDeniedException,
                                                                                  ResourceNotFoundException,
                                                                                  AwsServiceException,
                                                                                  SdkClientException,
                                                                                  CleanRoomsMlException
```
    Create or update the resource policy for a configured audience model.
    
    Parameters:
    
    putConfiguredAudienceModelPolicyRequest -
    
    Returns:
    
    Result of the PutConfiguredAudienceModelPolicy operation returned by the service.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - putConfiguredAudienceModelPolicy
```
default PutConfiguredAudienceModelPolicyResponse putConfiguredAudienceModelPolicy(Consumer<PutConfiguredAudienceModelPolicyRequest.Builder> putConfiguredAudienceModelPolicyRequest)
                                                                           throws ValidationException,
                                                                                  AccessDeniedException,
                                                                                  ResourceNotFoundException,
                                                                                  AwsServiceException,
                                                                                  SdkClientException,
                                                                                  CleanRoomsMlException
```
    Create or update the resource policy for a configured audience model.
    
    This is a convenience which creates an instance of the PutConfiguredAudienceModelPolicyRequest.Builder avoiding the need to create one manually via PutConfiguredAudienceModelPolicyRequest.builder()
    
    Parameters:
    
    putConfiguredAudienceModelPolicyRequest - A Consumer that will call methods on PutConfiguredAudienceModelPolicyRequest.Builder to create a request.
    
    Returns:
    
    Result of the PutConfiguredAudienceModelPolicy operation returned by the service.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - startAudienceExportJob
```
default StartAudienceExportJobResponse startAudienceExportJob(StartAudienceExportJobRequest startAudienceExportJobRequest)
                                                       throws ConflictException,
                                                              ValidationException,
                                                              AccessDeniedException,
                                                              ResourceNotFoundException,
                                                              ServiceQuotaExceededException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              CleanRoomsMlException
```
    Export an audience of a specified size after you have generated an audience.
    
    Parameters:
    
    startAudienceExportJobRequest -
    
    Returns:
    
    Result of the StartAudienceExportJob operation returned by the service.
    
    Throws:
    
    ConflictException - A resource with that name already exists in this region.
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    ServiceQuotaExceededException - You have exceeded your service quota.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - startAudienceExportJob
```
default StartAudienceExportJobResponse startAudienceExportJob(Consumer<StartAudienceExportJobRequest.Builder> startAudienceExportJobRequest)
                                                       throws ConflictException,
                                                              ValidationException,
                                                              AccessDeniedException,
                                                              ResourceNotFoundException,
                                                              ServiceQuotaExceededException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              CleanRoomsMlException
```
    Export an audience of a specified size after you have generated an audience.
    
    This is a convenience which creates an instance of the StartAudienceExportJobRequest.Builder avoiding the need to create one manually via StartAudienceExportJobRequest.builder()
    
    Parameters:
    
    startAudienceExportJobRequest - A Consumer that will call methods on StartAudienceExportJobRequest.Builder to create a request.
    
    Returns:
    
    Result of the StartAudienceExportJob operation returned by the service.
    
    Throws:
    
    ConflictException - A resource with that name already exists in this region.
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    ServiceQuotaExceededException - You have exceeded your service quota.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - startAudienceGenerationJob
```
default StartAudienceGenerationJobResponse startAudienceGenerationJob(StartAudienceGenerationJobRequest startAudienceGenerationJobRequest)
                                                               throws ConflictException,
                                                                      ValidationException,
                                                                      AccessDeniedException,
                                                                      ResourceNotFoundException,
                                                                      ServiceQuotaExceededException,
                                                                      AwsServiceException,
                                                                      SdkClientException,
                                                                      CleanRoomsMlException
```
    Information necessary to start the audience generation job.
    
    Parameters:
    
    startAudienceGenerationJobRequest -
    
    Returns:
    
    Result of the StartAudienceGenerationJob operation returned by the service.
    
    Throws:
    
    ConflictException - A resource with that name already exists in this region.
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    ServiceQuotaExceededException - You have exceeded your service quota.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - startAudienceGenerationJob
```
default StartAudienceGenerationJobResponse startAudienceGenerationJob(Consumer<StartAudienceGenerationJobRequest.Builder> startAudienceGenerationJobRequest)
                                                               throws ConflictException,
                                                                      ValidationException,
                                                                      AccessDeniedException,
                                                                      ResourceNotFoundException,
                                                                      ServiceQuotaExceededException,
                                                                      AwsServiceException,
                                                                      SdkClientException,
                                                                      CleanRoomsMlException
```
    Information necessary to start the audience generation job.
    
    This is a convenience which creates an instance of the StartAudienceGenerationJobRequest.Builder avoiding the need to create one manually via StartAudienceGenerationJobRequest.builder()
    
    Parameters:
    
    startAudienceGenerationJobRequest - A Consumer that will call methods on StartAudienceGenerationJobRequest.Builder to create a request.
    
    Returns:
    
    Result of the StartAudienceGenerationJob operation returned by the service.
    
    Throws:
    
    ConflictException - A resource with that name already exists in this region.
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    ServiceQuotaExceededException - You have exceeded your service quota.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - tagResource
```
default TagResourceResponse tagResource(TagResourceRequest tagResourceRequest)
                                 throws ValidationException,
                                        AccessDeniedException,
                                        ResourceNotFoundException,
                                        AwsServiceException,
                                        SdkClientException,
                                        CleanRoomsMlException
```
    Adds metadata tags to a specified resource.
    
    Parameters:
    
    tagResourceRequest -
    
    Returns:
    
    Result of the TagResource operation returned by the service.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - tagResource
```
default TagResourceResponse tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)
                                 throws ValidationException,
                                        AccessDeniedException,
                                        ResourceNotFoundException,
                                        AwsServiceException,
                                        SdkClientException,
                                        CleanRoomsMlException
```
    Adds metadata tags to a specified resource.
    
    This is a convenience which creates an instance of the TagResourceRequest.Builder avoiding the need to create one manually via TagResourceRequest.builder()
    
    Parameters:
    
    tagResourceRequest - A Consumer that will call methods on TagResourceRequest.Builder to create a request.
    
    Returns:
    
    Result of the TagResource operation returned by the service.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - untagResource
```
default UntagResourceResponse untagResource(UntagResourceRequest untagResourceRequest)
                                     throws ValidationException,
                                            AccessDeniedException,
                                            ResourceNotFoundException,
                                            AwsServiceException,
                                            SdkClientException,
                                            CleanRoomsMlException
```
    Removes metadata tags from a specified resource.
    
    Parameters:
    
    untagResourceRequest -
    
    Returns:
    
    Result of the UntagResource operation returned by the service.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - untagResource
```
default UntagResourceResponse untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)
                                     throws ValidationException,
                                            AccessDeniedException,
                                            ResourceNotFoundException,
                                            AwsServiceException,
                                            SdkClientException,
                                            CleanRoomsMlException
```
    Removes metadata tags from a specified resource.
    
    This is a convenience which creates an instance of the UntagResourceRequest.Builder avoiding the need to create one manually via UntagResourceRequest.builder()
    
    Parameters:
    
    untagResourceRequest - A Consumer that will call methods on UntagResourceRequest.Builder to create a request.
    
    Returns:
    
    Result of the UntagResource operation returned by the service.
    
    Throws:
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateConfiguredAudienceModel
```
default UpdateConfiguredAudienceModelResponse updateConfiguredAudienceModel(UpdateConfiguredAudienceModelRequest updateConfiguredAudienceModelRequest)
                                                                     throws ConflictException,
                                                                            ValidationException,
                                                                            AccessDeniedException,
                                                                            ResourceNotFoundException,
                                                                            AwsServiceException,
                                                                            SdkClientException,
                                                                            CleanRoomsMlException
```
    Provides the information necessary to update a configured audience model. Updates that impact audience generation jobs take effect when a new job starts, but do not impact currently running jobs.
    
    Parameters:
    
    updateConfiguredAudienceModelRequest -
    
    Returns:
    
    Result of the UpdateConfiguredAudienceModel operation returned by the service.
    
    Throws:
    
    ConflictException - A resource with that name already exists in this region.
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateConfiguredAudienceModel
```
default UpdateConfiguredAudienceModelResponse updateConfiguredAudienceModel(Consumer<UpdateConfiguredAudienceModelRequest.Builder> updateConfiguredAudienceModelRequest)
                                                                     throws ConflictException,
                                                                            ValidationException,
                                                                            AccessDeniedException,
                                                                            ResourceNotFoundException,
                                                                            AwsServiceException,
                                                                            SdkClientException,
                                                                            CleanRoomsMlException
```
    Provides the information necessary to update a configured audience model. Updates that impact audience generation jobs take effect when a new job starts, but do not impact currently running jobs.
    
    This is a convenience which creates an instance of the UpdateConfiguredAudienceModelRequest.Builder avoiding the need to create one manually via UpdateConfiguredAudienceModelRequest.builder()
    
    Parameters:
    
    updateConfiguredAudienceModelRequest - A Consumer that will call methods on UpdateConfiguredAudienceModelRequest.Builder to create a request.
    
    Returns:
    
    Result of the UpdateConfiguredAudienceModel operation returned by the service.
    
    Throws:
    
    ConflictException - A resource with that name already exists in this region.
    
    ValidationException - The request parameters for this request are incorrect.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The resource you are requesting does not exist.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    CleanRoomsMlException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - create
```
static CleanRoomsMlClient create()
```
    Create a CleanRoomsMlClient with the region loaded from the DefaultAwsRegionProviderChain and credentials loaded from the DefaultCredentialsProvider.
  - builder
```
static CleanRoomsMlClientBuilder builder()
```
    Create a builder that can be used to configure and create a CleanRoomsMlClient.
  - serviceMetadata
```
static ServiceMetadata serviceMetadata()
```
  - serviceClientConfiguration
```
default CleanRoomsMlServiceClientConfiguration serviceClientConfiguration()
```
    Specified by:
    
    serviceClientConfiguration in interface AwsClient
    
    Specified by:
    
    serviceClientConfiguration in interface SdkClient

Modifier and Type	Field	Description
`static String`	`SERVICE_METADATA_ID`	Value for looking up the service's metadata from the `ServiceMetadataProvider`.
`static String`	`SERVICE_NAME`

Interface CleanRoomsMlClient

Field Summary

Method Summary

Methods inherited from interface software.amazon.awssdk.utils.SdkAutoCloseable

Methods inherited from interface software.amazon.awssdk.core.SdkClient

Field Detail

SERVICE_NAME

SERVICE_METADATA_ID

Method Detail

createAudienceModel

createAudienceModel

createConfiguredAudienceModel

createConfiguredAudienceModel

createTrainingDataset

createTrainingDataset

deleteAudienceGenerationJob

deleteAudienceGenerationJob

deleteAudienceModel

deleteAudienceModel

deleteConfiguredAudienceModel

deleteConfiguredAudienceModel

deleteConfiguredAudienceModelPolicy

deleteConfiguredAudienceModelPolicy

deleteTrainingDataset

deleteTrainingDataset

getAudienceGenerationJob

getAudienceGenerationJob

getAudienceModel

getAudienceModel

getConfiguredAudienceModel

getConfiguredAudienceModel

getConfiguredAudienceModelPolicy

getConfiguredAudienceModelPolicy

getTrainingDataset

getTrainingDataset

listAudienceExportJobs

listAudienceExportJobs

listAudienceExportJobsPaginator

listAudienceExportJobsPaginator

listAudienceGenerationJobs

listAudienceGenerationJobs

listAudienceGenerationJobsPaginator

listAudienceGenerationJobsPaginator

listAudienceModels

listAudienceModels

listAudienceModelsPaginator

listAudienceModelsPaginator

listConfiguredAudienceModels

listConfiguredAudienceModels

listConfiguredAudienceModelsPaginator

listConfiguredAudienceModelsPaginator

listTagsForResource

listTagsForResource

listTrainingDatasets

listTrainingDatasets

listTrainingDatasetsPaginator

listTrainingDatasetsPaginator

putConfiguredAudienceModelPolicy

putConfiguredAudienceModelPolicy

startAudienceExportJob

startAudienceExportJob

startAudienceGenerationJob

startAudienceGenerationJob

tagResource

tagResource

untagResource

untagResource

updateConfiguredAudienceModel

updateConfiguredAudienceModel

create

builder

serviceMetadata

serviceClientConfiguration