Package software.amazon.awssdk.services.databasemigration.model

Interface MicrosoftSQLServerSettings.Builder

    • Method Detail

      • port

        MicrosoftSQLServerSettings.Builder port​(Integer port)

        Endpoint TCP port.

        Parameters:
        port - Endpoint TCP port.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • bcpPacketSize

        MicrosoftSQLServerSettings.Builder bcpPacketSize​(Integer bcpPacketSize)

        The maximum size of the packets (in bytes) used to transfer data using BCP.

        Parameters:
        bcpPacketSize - The maximum size of the packets (in bytes) used to transfer data using BCP.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • databaseName

        MicrosoftSQLServerSettings.Builder databaseName​(String databaseName)

        Database name for the endpoint.

        Parameters:
        databaseName - Database name for the endpoint.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • controlTablesFileGroup

        MicrosoftSQLServerSettings.Builder controlTablesFileGroup​(String controlTablesFileGroup)

        Specifies a file group for the DMS internal tables. When the replication task starts, all the internal DMS control tables (awsdms_ apply_exception, awsdms_apply, awsdms_changes) are created for the specified file group.

        Parameters:
        controlTablesFileGroup - Specifies a file group for the DMS internal tables. When the replication task starts, all the internal DMS control tables (awsdms_ apply_exception, awsdms_apply, awsdms_changes) are created for the specified file group.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • password

        MicrosoftSQLServerSettings.Builder password​(String password)

        Endpoint connection password.

        Parameters:
        password - Endpoint connection password.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • querySingleAlwaysOnNode

        MicrosoftSQLServerSettings.Builder querySingleAlwaysOnNode​(Boolean querySingleAlwaysOnNode)

        Cleans and recreates table metadata information on the replication instance when a mismatch occurs. An example is a situation where running an alter DDL statement on a table might result in different information about the table cached in the replication instance.

        Parameters:
        querySingleAlwaysOnNode - Cleans and recreates table metadata information on the replication instance when a mismatch occurs. An example is a situation where running an alter DDL statement on a table might result in different information about the table cached in the replication instance.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • readBackupOnly

        MicrosoftSQLServerSettings.Builder readBackupOnly​(Boolean readBackupOnly)

        When this attribute is set to Y, DMS only reads changes from transaction log backups and doesn't read from the active transaction log file during ongoing replication. Setting this parameter to Y enables you to control active transaction log file growth during full load and ongoing replication tasks. However, it can add some source latency to ongoing replication.

        Parameters:
        readBackupOnly - When this attribute is set to Y, DMS only reads changes from transaction log backups and doesn't read from the active transaction log file during ongoing replication. Setting this parameter to Y enables you to control active transaction log file growth during full load and ongoing replication tasks. However, it can add some source latency to ongoing replication.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • safeguardPolicy

        MicrosoftSQLServerSettings.Builder safeguardPolicy​(String safeguardPolicy)

        Use this attribute to minimize the need to access the backup log and enable DMS to prevent truncation using one of the following two methods.

        Start transactions in the database: This is the default method. When this method is used, DMS prevents TLOG truncation by mimicking a transaction in the database. As long as such a transaction is open, changes that appear after the transaction started aren't truncated. If you need Microsoft Replication to be enabled in your database, then you must choose this method.

        Exclusively use sp_repldone within a single task: When this method is used, DMS reads the changes and then uses sp_repldone to mark the TLOG transactions as ready for truncation. Although this method doesn't involve any transactional activities, it can only be used when Microsoft Replication isn't running. Also, when using this method, only one DMS task can access the database at any given time. Therefore, if you need to run parallel DMS tasks against the same database, use the default method.

        Parameters:
        safeguardPolicy - Use this attribute to minimize the need to access the backup log and enable DMS to prevent truncation using one of the following two methods.

        Start transactions in the database: This is the default method. When this method is used, DMS prevents TLOG truncation by mimicking a transaction in the database. As long as such a transaction is open, changes that appear after the transaction started aren't truncated. If you need Microsoft Replication to be enabled in your database, then you must choose this method.

        Exclusively use sp_repldone within a single task: When this method is used, DMS reads the changes and then uses sp_repldone to mark the TLOG transactions as ready for truncation. Although this method doesn't involve any transactional activities, it can only be used when Microsoft Replication isn't running. Also, when using this method, only one DMS task can access the database at any given time. Therefore, if you need to run parallel DMS tasks against the same database, use the default method.

        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        SafeguardPolicy, SafeguardPolicy

      • safeguardPolicy

        MicrosoftSQLServerSettings.Builder safeguardPolicy​(SafeguardPolicy safeguardPolicy)

        Use this attribute to minimize the need to access the backup log and enable DMS to prevent truncation using one of the following two methods.

        Start transactions in the database: This is the default method. When this method is used, DMS prevents TLOG truncation by mimicking a transaction in the database. As long as such a transaction is open, changes that appear after the transaction started aren't truncated. If you need Microsoft Replication to be enabled in your database, then you must choose this method.

        Exclusively use sp_repldone within a single task: When this method is used, DMS reads the changes and then uses sp_repldone to mark the TLOG transactions as ready for truncation. Although this method doesn't involve any transactional activities, it can only be used when Microsoft Replication isn't running. Also, when using this method, only one DMS task can access the database at any given time. Therefore, if you need to run parallel DMS tasks against the same database, use the default method.

        Parameters:
        safeguardPolicy - Use this attribute to minimize the need to access the backup log and enable DMS to prevent truncation using one of the following two methods.

        Start transactions in the database: This is the default method. When this method is used, DMS prevents TLOG truncation by mimicking a transaction in the database. As long as such a transaction is open, changes that appear after the transaction started aren't truncated. If you need Microsoft Replication to be enabled in your database, then you must choose this method.

        Exclusively use sp_repldone within a single task: When this method is used, DMS reads the changes and then uses sp_repldone to mark the TLOG transactions as ready for truncation. Although this method doesn't involve any transactional activities, it can only be used when Microsoft Replication isn't running. Also, when using this method, only one DMS task can access the database at any given time. Therefore, if you need to run parallel DMS tasks against the same database, use the default method.

        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        SafeguardPolicy, SafeguardPolicy

      • serverName

        MicrosoftSQLServerSettings.Builder serverName​(String serverName)

        Fully qualified domain name of the endpoint. For an Amazon RDS SQL Server instance, this is the output of DescribeDBInstances, in the Endpoint.Address field.

        Parameters:
        serverName - Fully qualified domain name of the endpoint. For an Amazon RDS SQL Server instance, this is the output of DescribeDBInstances, in the Endpoint.Address field.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • username

        MicrosoftSQLServerSettings.Builder username​(String username)

        Endpoint connection user name.

        Parameters:
        username - Endpoint connection user name.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • useBcpFullLoad

        MicrosoftSQLServerSettings.Builder useBcpFullLoad​(Boolean useBcpFullLoad)

        Use this to attribute to transfer data for full-load operations using BCP. When the target table contains an identity column that does not exist in the source table, you must disable the use BCP for loading table option.

        Parameters:
        useBcpFullLoad - Use this to attribute to transfer data for full-load operations using BCP. When the target table contains an identity column that does not exist in the source table, you must disable the use BCP for loading table option.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • useThirdPartyBackupDevice

        MicrosoftSQLServerSettings.Builder useThirdPartyBackupDevice​(Boolean useThirdPartyBackupDevice)

        When this attribute is set to Y, DMS processes third-party transaction log backups if they are created in native format.

        Parameters:
        useThirdPartyBackupDevice - When this attribute is set to Y, DMS processes third-party transaction log backups if they are created in native format.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • secretsManagerAccessRoleArn

        MicrosoftSQLServerSettings.Builder secretsManagerAccessRoleArn​(String secretsManagerAccessRoleArn)

        The full Amazon Resource Name (ARN) of the IAM role that specifies DMS as the trusted entity and grants the required permissions to access the value in SecretsManagerSecret. The role must allow the iam:PassRole action. SecretsManagerSecret has the value of the Amazon Web Services Secrets Manager secret that allows access to the SQL Server endpoint.

        You can specify one of two sets of values for these permissions. You can specify the values for this setting and SecretsManagerSecretId. Or you can specify clear-text values for UserName, Password, ServerName, and Port. You can't specify both. For more information on creating this SecretsManagerSecret and the SecretsManagerAccessRoleArn and SecretsManagerSecretId required to access it, see Using secrets to access Database Migration Service resources in the Database Migration Service User Guide.

        Parameters:
        secretsManagerAccessRoleArn - The full Amazon Resource Name (ARN) of the IAM role that specifies DMS as the trusted entity and grants the required permissions to access the value in SecretsManagerSecret. The role must allow the iam:PassRole action. SecretsManagerSecret has the value of the Amazon Web Services Secrets Manager secret that allows access to the SQL Server endpoint.

        You can specify one of two sets of values for these permissions. You can specify the values for this setting and SecretsManagerSecretId. Or you can specify clear-text values for UserName, Password, ServerName, and Port. You can't specify both. For more information on creating this SecretsManagerSecret and the SecretsManagerAccessRoleArn and SecretsManagerSecretId required to access it, see Using secrets to access Database Migration Service resources in the Database Migration Service User Guide.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • secretsManagerSecretId

        MicrosoftSQLServerSettings.Builder secretsManagerSecretId​(String secretsManagerSecretId)

        The full ARN, partial ARN, or friendly name of the SecretsManagerSecret that contains the SQL Server endpoint connection details.

        Parameters:
        secretsManagerSecretId - The full ARN, partial ARN, or friendly name of the SecretsManagerSecret that contains the SQL Server endpoint connection details.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • trimSpaceInChar

        MicrosoftSQLServerSettings.Builder trimSpaceInChar​(Boolean trimSpaceInChar)

        Use the TrimSpaceInChar source endpoint setting to right-trim data on CHAR and NCHAR data types during migration. Setting TrimSpaceInChar does not left-trim data. The default value is true.

        Parameters:
        trimSpaceInChar - Use the TrimSpaceInChar source endpoint setting to right-trim data on CHAR and NCHAR data types during migration. Setting TrimSpaceInChar does not left-trim data. The default value is true.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • tlogAccessMode

        MicrosoftSQLServerSettings.Builder tlogAccessMode​(String tlogAccessMode)

        Indicates the mode used to fetch CDC data.

        Parameters:
        tlogAccessMode - Indicates the mode used to fetch CDC data.
        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        TlogAccessMode, TlogAccessMode

      • forceLobLookup

        MicrosoftSQLServerSettings.Builder forceLobLookup​(Boolean forceLobLookup)

        Forces LOB lookup on inline LOB.

        Parameters:
        forceLobLookup - Forces LOB lookup on inline LOB.
        Returns:
        Returns a reference to this object so that method calls can be chained together.