| AccessPointAlreadyExistsException |
Returned if the access point that you are trying to create already exists, with the creation token you provided in
the request.
|
| AccessPointLimitExceededException |
Returned if the Amazon Web Services account has already created the maximum number of access points allowed per file
system.
|
| AccessPointNotFoundException |
Returned if the specified AccessPointId value doesn't exist in the requester's Amazon Web Services
account.
|
| AvailabilityZonesMismatchException |
Returned if the Availability Zone that was specified for a mount target is different from the Availability Zone that
was specified for One Zone storage.
|
| BadRequestException |
Returned if the request is malformed or contains an error such as an invalid parameter value or a missing required
parameter.
|
| ConflictException |
Returned if the source file system in a replication is encrypted but the destination file system is unencrypted.
|
| CreateAccessPointRequest |
|
| CreateAccessPointRequest.Builder |
|
| CreateAccessPointResponse |
Provides a description of an EFS file system access point.
|
| CreateFileSystemRequest |
|
| CreateFileSystemRequest.Builder |
|
| CreateFileSystemResponse |
A description of the file system.
|
| CreateMountTargetRequest |
| CreateMountTargetRequest.Builder |
|
| CreateMountTargetResponse |
Provides a description of a mount target.
|
| CreateReplicationConfigurationRequest |
|
| CreateReplicationConfigurationRequest.Builder |
|
| CreateReplicationConfigurationResponse |
Describes the replication configuration for a specific file system.
|
| CreateTagsRequest |
| CreateTagsRequest.Builder |
|
| CreateTagsResponse |
|
| DeleteAccessPointRequest |
|
| DeleteAccessPointRequest.Builder |
|
| DeleteAccessPointResponse |
|
| DeleteFileSystemPolicyRequest |
|
| DeleteFileSystemPolicyRequest.Builder |
|
| DeleteFileSystemPolicyResponse |
|
| DeleteFileSystemRequest |
| DeleteFileSystemRequest.Builder |
|
| DeleteFileSystemResponse |
|
| DeleteMountTargetRequest |
| DeleteMountTargetRequest.Builder |
|
| DeleteMountTargetResponse |
|
| DeleteReplicationConfigurationRequest |
|
| DeleteReplicationConfigurationRequest.Builder |
|
| DeleteReplicationConfigurationResponse |
|
| DeleteTagsRequest |
| DeleteTagsRequest.Builder |
|
| DeleteTagsResponse |
|
| DependencyTimeoutException |
The service timed out trying to fulfill the request, and the client should try the call again.
|
| DescribeAccessPointsRequest |
|
| DescribeAccessPointsRequest.Builder |
|
| DescribeAccessPointsResponse |
|
| DescribeAccountPreferencesRequest |
|
| DescribeAccountPreferencesRequest.Builder |
|
| DescribeAccountPreferencesResponse |
|
| DescribeBackupPolicyRequest |
|
| DescribeBackupPolicyRequest.Builder |
|
| DescribeBackupPolicyResponse |
|
| DescribeFileSystemPolicyRequest |
|
| DescribeFileSystemPolicyRequest.Builder |
|
| DescribeFileSystemPolicyResponse |
|
| DescribeFileSystemsRequest |
| DescribeFileSystemsRequest.Builder |
|
| DescribeFileSystemsResponse |
|
| DescribeLifecycleConfigurationRequest |
|
| DescribeLifecycleConfigurationRequest.Builder |
|
| DescribeLifecycleConfigurationResponse |
|
| DescribeMountTargetSecurityGroupsRequest |
| DescribeMountTargetSecurityGroupsRequest.Builder |
|
| DescribeMountTargetSecurityGroupsResponse |
|
| DescribeMountTargetsRequest |
| DescribeMountTargetsRequest.Builder |
|
| DescribeMountTargetsResponse |
| DescribeReplicationConfigurationsRequest |
|
| DescribeReplicationConfigurationsRequest.Builder |
|
| DescribeReplicationConfigurationsResponse |
|
| DescribeTagsRequest |
| DescribeTagsRequest.Builder |
|
| DescribeTagsResponse |
| EfsException |
|
| FileSystemAlreadyExistsException |
Returned if the file system you are trying to create already exists, with the creation token you provided.
|
| FileSystemInUseException |
Returned if a file system has mount targets.
|
| FileSystemLimitExceededException |
Returned if the Amazon Web Services account has already created the maximum number of file systems allowed per
account.
|
| FileSystemNotFoundException |
Returned if the specified FileSystemId value doesn't exist in the requester's Amazon Web Services
account.
|
| IncorrectFileSystemLifeCycleStateException |
Returned if the file system's lifecycle state is not "available".
|
| IncorrectMountTargetStateException |
Returned if the mount target is not in the correct state for the operation.
|
| InsufficientThroughputCapacityException |
Returned if there's not enough capacity to provision additional throughput.
|
| InternalServerErrorException |
Returned if an error occurred on the server side.
|
| InvalidPolicyException |
Returned if the FileSystemPolicy is malformed or contains an error such as a parameter value that is not
valid or a missing required parameter.
|
| IpAddressInUseException |
Returned if the request specified an IpAddress that is already in use in the subnet.
|
| ListTagsForResourceRequest |
|
| ListTagsForResourceRequest.Builder |
|
| ListTagsForResourceResponse |
|
| ModifyMountTargetSecurityGroupsRequest |
| ModifyMountTargetSecurityGroupsRequest.Builder |
|
| ModifyMountTargetSecurityGroupsResponse |
|
| MountTargetConflictException |
Returned if the mount target would violate one of the specified restrictions based on the file system's existing
mount targets.
|
| MountTargetNotFoundException |
Returned if there is no mount target with the specified ID found in the caller's Amazon Web Services account.
|
| NetworkInterfaceLimitExceededException |
The calling account has reached the limit for elastic network interfaces for the specific Amazon Web Services Region.
|
| NoFreeAddressesInSubnetException |
Returned if IpAddress was not specified in the request and there are no free IP addresses in the subnet.
|
| PolicyNotFoundException |
Returned if the default file system policy is in effect for the EFS file system specified.
|
| PutAccountPreferencesRequest |
|
| PutAccountPreferencesRequest.Builder |
|
| PutAccountPreferencesResponse |
|
| PutBackupPolicyRequest |
|
| PutBackupPolicyRequest.Builder |
|
| PutBackupPolicyResponse |
|
| PutFileSystemPolicyRequest |
|
| PutFileSystemPolicyRequest.Builder |
|
| PutFileSystemPolicyResponse |
|
| PutLifecycleConfigurationRequest |
|
| PutLifecycleConfigurationRequest.Builder |
|
| PutLifecycleConfigurationResponse |
|
| ReplicationAlreadyExistsException |
Returned if the file system is already included in a replication configuration.>
|
| ReplicationNotFoundException |
Returned if the specified file system does not have a replication configuration.
|
| SecurityGroupLimitExceededException |
Returned if the size of SecurityGroups specified in the request is greater than five.
|
| SecurityGroupNotFoundException |
Returned if one of the specified security groups doesn't exist in the subnet's virtual private cloud (VPC).
|
| SubnetNotFoundException |
Returned if there is no subnet with ID SubnetId provided in the request.
|
| TagResourceRequest |
|
| TagResourceRequest.Builder |
|
| TagResourceResponse |
|
| ThrottlingException |
Returned when the CreateAccessPoint API action is called too quickly and the number of Access Points on
the file system is nearing the limit of
120. |
| ThroughputLimitExceededException |
Returned if the throughput mode or amount of provisioned throughput can't be changed because the throughput limit of
1024 MiB/s has been reached.
|
| TooManyRequestsException |
Returned if you don’t wait at least 24 hours before either changing the throughput mode, or decreasing the
Provisioned Throughput value.
|
| UnsupportedAvailabilityZoneException |
Returned if the requested Amazon EFS functionality is not available in the specified Availability Zone.
|
| UntagResourceRequest |
|
| UntagResourceRequest.Builder |
|
| UntagResourceResponse |
|
| UpdateFileSystemProtectionRequest |
|
| UpdateFileSystemProtectionRequest.Builder |
|
| UpdateFileSystemProtectionResponse |
Describes the protection on a file system.
|
| UpdateFileSystemRequest |
|
| UpdateFileSystemRequest.Builder |
|
| UpdateFileSystemResponse |
A description of the file system.
|
| ValidationException |
Returned if the Backup service is not available in the Amazon Web Services Region in which the request was made.
|