public static interface CreateTargetGroupRequest.Builder extends ElasticLoadBalancingV2Request.Builder, SdkPojo, CopyableBuilder<CreateTargetGroupRequest.Builder,CreateTargetGroupRequest>
| Modifier and Type | Method and Description |
|---|---|
CreateTargetGroupRequest.Builder |
healthCheckEnabled(Boolean healthCheckEnabled)
Indicates whether health checks are enabled.
|
CreateTargetGroupRequest.Builder |
healthCheckIntervalSeconds(Integer healthCheckIntervalSeconds)
The approximate amount of time, in seconds, between health checks of an individual target.
|
CreateTargetGroupRequest.Builder |
healthCheckPath(String healthCheckPath)
[HTTP/HTTPS health checks] The destination for health checks on the targets.
|
CreateTargetGroupRequest.Builder |
healthCheckPort(String healthCheckPort)
The port the load balancer uses when performing health checks on targets.
|
CreateTargetGroupRequest.Builder |
healthCheckProtocol(ProtocolEnum healthCheckProtocol)
The protocol the load balancer uses when performing health checks on targets.
|
CreateTargetGroupRequest.Builder |
healthCheckProtocol(String healthCheckProtocol)
The protocol the load balancer uses when performing health checks on targets.
|
CreateTargetGroupRequest.Builder |
healthCheckTimeoutSeconds(Integer healthCheckTimeoutSeconds)
The amount of time, in seconds, during which no response from a target means a failed health check.
|
CreateTargetGroupRequest.Builder |
healthyThresholdCount(Integer healthyThresholdCount)
The number of consecutive health check successes required before considering a target healthy.
|
CreateTargetGroupRequest.Builder |
ipAddressType(String ipAddressType)
The type of IP address used for this target group.
|
CreateTargetGroupRequest.Builder |
ipAddressType(TargetGroupIpAddressTypeEnum ipAddressType)
The type of IP address used for this target group.
|
default CreateTargetGroupRequest.Builder |
matcher(Consumer<Matcher.Builder> matcher)
[HTTP/HTTPS health checks] The HTTP or gRPC codes to use when checking for a successful response from a
target.
|
CreateTargetGroupRequest.Builder |
matcher(Matcher matcher)
[HTTP/HTTPS health checks] The HTTP or gRPC codes to use when checking for a successful response from a
target.
|
CreateTargetGroupRequest.Builder |
name(String name)
The name of the target group.
|
CreateTargetGroupRequest.Builder |
overrideConfiguration(AwsRequestOverrideConfiguration overrideConfiguration) |
CreateTargetGroupRequest.Builder |
overrideConfiguration(Consumer<AwsRequestOverrideConfiguration.Builder> builderConsumer) |
CreateTargetGroupRequest.Builder |
port(Integer port)
The port on which the targets receive traffic.
|
CreateTargetGroupRequest.Builder |
protocol(ProtocolEnum protocol)
The protocol to use for routing traffic to the targets.
|
CreateTargetGroupRequest.Builder |
protocol(String protocol)
The protocol to use for routing traffic to the targets.
|
CreateTargetGroupRequest.Builder |
protocolVersion(String protocolVersion)
[HTTP/HTTPS protocol] The protocol version.
|
CreateTargetGroupRequest.Builder |
tags(Collection<Tag> tags)
The tags to assign to the target group.
|
CreateTargetGroupRequest.Builder |
tags(Consumer<Tag.Builder>... tags)
The tags to assign to the target group.
|
CreateTargetGroupRequest.Builder |
tags(Tag... tags)
The tags to assign to the target group.
|
CreateTargetGroupRequest.Builder |
targetType(String targetType)
The type of target that you must specify when registering targets with this target group.
|
CreateTargetGroupRequest.Builder |
targetType(TargetTypeEnum targetType)
The type of target that you must specify when registering targets with this target group.
|
CreateTargetGroupRequest.Builder |
unhealthyThresholdCount(Integer unhealthyThresholdCount)
The number of consecutive health check failures required before considering a target unhealthy.
|
CreateTargetGroupRequest.Builder |
vpcId(String vpcId)
The identifier of the virtual private cloud (VPC).
|
buildoverrideConfigurationequalsBySdkFields, sdkFieldscopyapplyMutation, buildCreateTargetGroupRequest.Builder name(String name)
The name of the target group.
This name must be unique per region per account, can have a maximum of 32 characters, must contain only alphanumeric characters or hyphens, and must not begin or end with a hyphen.
name - The name of the target group.
This name must be unique per region per account, can have a maximum of 32 characters, must contain only alphanumeric characters or hyphens, and must not begin or end with a hyphen.
CreateTargetGroupRequest.Builder protocol(String protocol)
The protocol to use for routing traffic to the targets. For Application Load Balancers, the supported protocols are HTTP and HTTPS. For Network Load Balancers, the supported protocols are TCP, TLS, UDP, or TCP_UDP. For Gateway Load Balancers, the supported protocol is GENEVE. A TCP_UDP listener must be associated with a TCP_UDP target group. If the target is a Lambda function, this parameter does not apply.
protocol - The protocol to use for routing traffic to the targets. For Application Load Balancers, the supported
protocols are HTTP and HTTPS. For Network Load Balancers, the supported protocols are TCP, TLS, UDP,
or TCP_UDP. For Gateway Load Balancers, the supported protocol is GENEVE. A TCP_UDP listener must be
associated with a TCP_UDP target group. If the target is a Lambda function, this parameter does not
apply.ProtocolEnum,
ProtocolEnumCreateTargetGroupRequest.Builder protocol(ProtocolEnum protocol)
The protocol to use for routing traffic to the targets. For Application Load Balancers, the supported protocols are HTTP and HTTPS. For Network Load Balancers, the supported protocols are TCP, TLS, UDP, or TCP_UDP. For Gateway Load Balancers, the supported protocol is GENEVE. A TCP_UDP listener must be associated with a TCP_UDP target group. If the target is a Lambda function, this parameter does not apply.
protocol - The protocol to use for routing traffic to the targets. For Application Load Balancers, the supported
protocols are HTTP and HTTPS. For Network Load Balancers, the supported protocols are TCP, TLS, UDP,
or TCP_UDP. For Gateway Load Balancers, the supported protocol is GENEVE. A TCP_UDP listener must be
associated with a TCP_UDP target group. If the target is a Lambda function, this parameter does not
apply.ProtocolEnum,
ProtocolEnumCreateTargetGroupRequest.Builder protocolVersion(String protocolVersion)
[HTTP/HTTPS protocol] The protocol version. Specify GRPC to send requests to targets using gRPC.
Specify HTTP2 to send requests to targets using HTTP/2. The default is HTTP1, which
sends requests to targets using HTTP/1.1.
protocolVersion - [HTTP/HTTPS protocol] The protocol version. Specify GRPC to send requests to targets
using gRPC. Specify HTTP2 to send requests to targets using HTTP/2. The default is
HTTP1, which sends requests to targets using HTTP/1.1.CreateTargetGroupRequest.Builder port(Integer port)
The port on which the targets receive traffic. This port is used unless you specify a port override when registering the target. If the target is a Lambda function, this parameter does not apply. If the protocol is GENEVE, the supported port is 6081.
port - The port on which the targets receive traffic. This port is used unless you specify a port override
when registering the target. If the target is a Lambda function, this parameter does not apply. If the
protocol is GENEVE, the supported port is 6081.CreateTargetGroupRequest.Builder vpcId(String vpcId)
The identifier of the virtual private cloud (VPC). If the target is a Lambda function, this parameter does not apply. Otherwise, this parameter is required.
vpcId - The identifier of the virtual private cloud (VPC). If the target is a Lambda function, this parameter
does not apply. Otherwise, this parameter is required.CreateTargetGroupRequest.Builder healthCheckProtocol(String healthCheckProtocol)
The protocol the load balancer uses when performing health checks on targets. For Application Load Balancers, the default is HTTP. For Network Load Balancers and Gateway Load Balancers, the default is TCP. The TCP protocol is not supported for health checks if the protocol of the target group is HTTP or HTTPS. The GENEVE, TLS, UDP, and TCP_UDP protocols are not supported for health checks.
healthCheckProtocol - The protocol the load balancer uses when performing health checks on targets. For Application Load
Balancers, the default is HTTP. For Network Load Balancers and Gateway Load Balancers, the default is
TCP. The TCP protocol is not supported for health checks if the protocol of the target group is HTTP
or HTTPS. The GENEVE, TLS, UDP, and TCP_UDP protocols are not supported for health checks.ProtocolEnum,
ProtocolEnumCreateTargetGroupRequest.Builder healthCheckProtocol(ProtocolEnum healthCheckProtocol)
The protocol the load balancer uses when performing health checks on targets. For Application Load Balancers, the default is HTTP. For Network Load Balancers and Gateway Load Balancers, the default is TCP. The TCP protocol is not supported for health checks if the protocol of the target group is HTTP or HTTPS. The GENEVE, TLS, UDP, and TCP_UDP protocols are not supported for health checks.
healthCheckProtocol - The protocol the load balancer uses when performing health checks on targets. For Application Load
Balancers, the default is HTTP. For Network Load Balancers and Gateway Load Balancers, the default is
TCP. The TCP protocol is not supported for health checks if the protocol of the target group is HTTP
or HTTPS. The GENEVE, TLS, UDP, and TCP_UDP protocols are not supported for health checks.ProtocolEnum,
ProtocolEnumCreateTargetGroupRequest.Builder healthCheckPort(String healthCheckPort)
The port the load balancer uses when performing health checks on targets. If the protocol is HTTP, HTTPS,
TCP, TLS, UDP, or TCP_UDP, the default is traffic-port, which is the port on which each target
receives traffic from the load balancer. If the protocol is GENEVE, the default is port 80.
healthCheckPort - The port the load balancer uses when performing health checks on targets. If the protocol is HTTP,
HTTPS, TCP, TLS, UDP, or TCP_UDP, the default is traffic-port, which is the port on which
each target receives traffic from the load balancer. If the protocol is GENEVE, the default is port
80.CreateTargetGroupRequest.Builder healthCheckEnabled(Boolean healthCheckEnabled)
Indicates whether health checks are enabled. If the target type is lambda, health checks are
disabled by default but can be enabled. If the target type is instance, ip, or
alb, health checks are always enabled and cannot be disabled.
healthCheckEnabled - Indicates whether health checks are enabled. If the target type is lambda, health checks
are disabled by default but can be enabled. If the target type is instance,
ip, or alb, health checks are always enabled and cannot be disabled.CreateTargetGroupRequest.Builder healthCheckPath(String healthCheckPath)
[HTTP/HTTPS health checks] The destination for health checks on the targets.
[HTTP1 or HTTP2 protocol version] The ping path. The default is /.
[GRPC protocol version] The path of a custom health check method with the format /package.service/method. The default is /Amazon Web Services.ALB/healthcheck.
healthCheckPath - [HTTP/HTTPS health checks] The destination for health checks on the targets.
[HTTP1 or HTTP2 protocol version] The ping path. The default is /.
[GRPC protocol version] The path of a custom health check method with the format /package.service/method. The default is /Amazon Web Services.ALB/healthcheck.
CreateTargetGroupRequest.Builder healthCheckIntervalSeconds(Integer healthCheckIntervalSeconds)
The approximate amount of time, in seconds, between health checks of an individual target. The range is
5-300. If the target group protocol is TCP, TLS, UDP, TCP_UDP, HTTP or HTTPS, the default is 30 seconds. If
the target group protocol is GENEVE, the default is 10 seconds. If the target type is lambda,
the default is 35 seconds.
healthCheckIntervalSeconds - The approximate amount of time, in seconds, between health checks of an individual target. The range
is 5-300. If the target group protocol is TCP, TLS, UDP, TCP_UDP, HTTP or HTTPS, the default is 30
seconds. If the target group protocol is GENEVE, the default is 10 seconds. If the target type is
lambda, the default is 35 seconds.CreateTargetGroupRequest.Builder healthCheckTimeoutSeconds(Integer healthCheckTimeoutSeconds)
The amount of time, in seconds, during which no response from a target means a failed health check. The range
is 2–120 seconds. For target groups with a protocol of HTTP, the default is 6 seconds. For target groups with
a protocol of TCP, TLS or HTTPS, the default is 10 seconds. For target groups with a protocol of GENEVE, the
default is 5 seconds. If the target type is lambda, the default is 30 seconds.
healthCheckTimeoutSeconds - The amount of time, in seconds, during which no response from a target means a failed health check.
The range is 2–120 seconds. For target groups with a protocol of HTTP, the default is 6 seconds. For
target groups with a protocol of TCP, TLS or HTTPS, the default is 10 seconds. For target groups with
a protocol of GENEVE, the default is 5 seconds. If the target type is lambda, the default
is 30 seconds.CreateTargetGroupRequest.Builder healthyThresholdCount(Integer healthyThresholdCount)
The number of consecutive health check successes required before considering a target healthy. The range is
2-10. If the target group protocol is TCP, TCP_UDP, UDP, TLS, HTTP or HTTPS, the default is 5. For target
groups with a protocol of GENEVE, the default is 3. If the target type is lambda, the default is
5.
healthyThresholdCount - The number of consecutive health check successes required before considering a target healthy. The
range is 2-10. If the target group protocol is TCP, TCP_UDP, UDP, TLS, HTTP or HTTPS, the default is
5. For target groups with a protocol of GENEVE, the default is 3. If the target type is
lambda, the default is 5.CreateTargetGroupRequest.Builder unhealthyThresholdCount(Integer unhealthyThresholdCount)
The number of consecutive health check failures required before considering a target unhealthy. The range is
2-10. If the target group protocol is TCP, TCP_UDP, UDP, TLS, HTTP or HTTPS, the default is 2. For target
groups with a protocol of GENEVE, the default is 3. If the target type is lambda, the default is
5.
unhealthyThresholdCount - The number of consecutive health check failures required before considering a target unhealthy. The
range is 2-10. If the target group protocol is TCP, TCP_UDP, UDP, TLS, HTTP or HTTPS, the default is
2. For target groups with a protocol of GENEVE, the default is 3. If the target type is
lambda, the default is 5.CreateTargetGroupRequest.Builder matcher(Matcher matcher)
[HTTP/HTTPS health checks] The HTTP or gRPC codes to use when checking for a successful response from a target. For target groups with a protocol of TCP, TCP_UDP, UDP or TLS the range is 200-599. For target groups with a protocol of HTTP or HTTPS, the range is 200-499. For target groups with a protocol of GENEVE, the range is 200-399.
matcher - [HTTP/HTTPS health checks] The HTTP or gRPC codes to use when checking for a successful response from
a target. For target groups with a protocol of TCP, TCP_UDP, UDP or TLS the range is 200-599. For
target groups with a protocol of HTTP or HTTPS, the range is 200-499. For target groups with a
protocol of GENEVE, the range is 200-399.default CreateTargetGroupRequest.Builder matcher(Consumer<Matcher.Builder> matcher)
[HTTP/HTTPS health checks] The HTTP or gRPC codes to use when checking for a successful response from a target. For target groups with a protocol of TCP, TCP_UDP, UDP or TLS the range is 200-599. For target groups with a protocol of HTTP or HTTPS, the range is 200-499. For target groups with a protocol of GENEVE, the range is 200-399.
This is a convenience method that creates an instance of theMatcher.Builder avoiding the need to
create one manually via Matcher.builder().
When the Consumer completes, SdkBuilder.build() is called immediately and its result is
passed to matcher(Matcher).
matcher - a consumer that will call methods on Matcher.Buildermatcher(Matcher)CreateTargetGroupRequest.Builder targetType(String targetType)
The type of target that you must specify when registering targets with this target group. You can't specify targets for a target group using more than one target type.
instance - Register targets by instance ID. This is the default value.
ip - Register targets by IP address. You can specify IP addresses from the subnets of the
virtual private cloud (VPC) for the target group, the RFC 1918 range (10.0.0.0/8, 172.16.0.0/12, and
192.168.0.0/16), and the RFC 6598 range (100.64.0.0/10). You can't specify publicly routable IP addresses.
lambda - Register a single Lambda function as a target.
alb - Register a single Application Load Balancer as a target.
targetType - The type of target that you must specify when registering targets with this target group. You can't
specify targets for a target group using more than one target type.
instance - Register targets by instance ID. This is the default value.
ip - Register targets by IP address. You can specify IP addresses from the subnets of the
virtual private cloud (VPC) for the target group, the RFC 1918 range (10.0.0.0/8, 172.16.0.0/12, and
192.168.0.0/16), and the RFC 6598 range (100.64.0.0/10). You can't specify publicly routable IP
addresses.
lambda - Register a single Lambda function as a target.
alb - Register a single Application Load Balancer as a target.
TargetTypeEnum,
TargetTypeEnumCreateTargetGroupRequest.Builder targetType(TargetTypeEnum targetType)
The type of target that you must specify when registering targets with this target group. You can't specify targets for a target group using more than one target type.
instance - Register targets by instance ID. This is the default value.
ip - Register targets by IP address. You can specify IP addresses from the subnets of the
virtual private cloud (VPC) for the target group, the RFC 1918 range (10.0.0.0/8, 172.16.0.0/12, and
192.168.0.0/16), and the RFC 6598 range (100.64.0.0/10). You can't specify publicly routable IP addresses.
lambda - Register a single Lambda function as a target.
alb - Register a single Application Load Balancer as a target.
targetType - The type of target that you must specify when registering targets with this target group. You can't
specify targets for a target group using more than one target type.
instance - Register targets by instance ID. This is the default value.
ip - Register targets by IP address. You can specify IP addresses from the subnets of the
virtual private cloud (VPC) for the target group, the RFC 1918 range (10.0.0.0/8, 172.16.0.0/12, and
192.168.0.0/16), and the RFC 6598 range (100.64.0.0/10). You can't specify publicly routable IP
addresses.
lambda - Register a single Lambda function as a target.
alb - Register a single Application Load Balancer as a target.
TargetTypeEnum,
TargetTypeEnumCreateTargetGroupRequest.Builder tags(Collection<Tag> tags)
The tags to assign to the target group.
tags - The tags to assign to the target group.CreateTargetGroupRequest.Builder tags(Tag... tags)
The tags to assign to the target group.
tags - The tags to assign to the target group.CreateTargetGroupRequest.Builder tags(Consumer<Tag.Builder>... tags)
The tags to assign to the target group.
This is a convenience method that creates an instance of theTag.Builder avoiding the need to create
one manually via Tag.builder().
When the Consumer completes,
SdkBuilder.build() is called
immediately and its result is passed to #tags(List.
tags - a consumer that will call methods on
Tag.Builder#tags(java.util.Collection) CreateTargetGroupRequest.Builder ipAddressType(String ipAddressType)
The type of IP address used for this target group. The possible values are ipv4 and
ipv6. This is an optional parameter. If not specified, the IP address type defaults to
ipv4.
ipAddressType - The type of IP address used for this target group. The possible values are ipv4 and
ipv6. This is an optional parameter. If not specified, the IP address type defaults to
ipv4.TargetGroupIpAddressTypeEnum,
TargetGroupIpAddressTypeEnumCreateTargetGroupRequest.Builder ipAddressType(TargetGroupIpAddressTypeEnum ipAddressType)
The type of IP address used for this target group. The possible values are ipv4 and
ipv6. This is an optional parameter. If not specified, the IP address type defaults to
ipv4.
ipAddressType - The type of IP address used for this target group. The possible values are ipv4 and
ipv6. This is an optional parameter. If not specified, the IP address type defaults to
ipv4.TargetGroupIpAddressTypeEnum,
TargetGroupIpAddressTypeEnumCreateTargetGroupRequest.Builder overrideConfiguration(AwsRequestOverrideConfiguration overrideConfiguration)
overrideConfiguration in interface AwsRequest.BuilderCreateTargetGroupRequest.Builder overrideConfiguration(Consumer<AwsRequestOverrideConfiguration.Builder> builderConsumer)
overrideConfiguration in interface AwsRequest.BuilderCopyright © 2023. All rights reserved.