All Superinterfaces:

AutoCloseable, AwsClient, SdkAutoCloseable, SdkClient
```
@Generated("software.amazon.awssdk:codegen")
@ThreadSafe
public interface Inspector2Client
extends AwsClient
```
Service client for accessing Inspector2. This can be created using the static builder() method.
Amazon Inspector is a vulnerability discovery service that automates continuous scanning for security vulnerabilities within your Amazon EC2, Amazon ECR, and Amazon Web Services Lambda environments.

Field Summary

Fields
Modifier and Type Field Description

static String SERVICE_METADATA_ID
Value for looking up the service's metadata from the ServiceMetadataProvider.

static String SERVICE_NAME

Method Summary

All Methods Static Methods Instance Methods Default Methods
Modifier and Type	Method	Description
`default AssociateMemberResponse`	`associateMember(Consumer<AssociateMemberRequest.Builder> associateMemberRequest)`	Associates an Amazon Web Services account with an Amazon Inspector delegated administrator.
`default AssociateMemberResponse`	`associateMember(AssociateMemberRequest associateMemberRequest)`	Associates an Amazon Web Services account with an Amazon Inspector delegated administrator.
`default BatchGetAccountStatusResponse`	`batchGetAccountStatus(Consumer<BatchGetAccountStatusRequest.Builder> batchGetAccountStatusRequest)`	Retrieves the Amazon Inspector status of multiple Amazon Web Services accounts within your environment.
`default BatchGetAccountStatusResponse`	`batchGetAccountStatus(BatchGetAccountStatusRequest batchGetAccountStatusRequest)`	Retrieves the Amazon Inspector status of multiple Amazon Web Services accounts within your environment.
`default BatchGetCodeSnippetResponse`	`batchGetCodeSnippet(Consumer<BatchGetCodeSnippetRequest.Builder> batchGetCodeSnippetRequest)`	Retrieves code snippets from findings that Amazon Inspector detected code vulnerabilities in.
`default BatchGetCodeSnippetResponse`	`batchGetCodeSnippet(BatchGetCodeSnippetRequest batchGetCodeSnippetRequest)`	Retrieves code snippets from findings that Amazon Inspector detected code vulnerabilities in.
`default BatchGetFindingDetailsResponse`	`batchGetFindingDetails(Consumer<BatchGetFindingDetailsRequest.Builder> batchGetFindingDetailsRequest)`	Gets vulnerability details for findings.
`default BatchGetFindingDetailsResponse`	`batchGetFindingDetails(BatchGetFindingDetailsRequest batchGetFindingDetailsRequest)`	Gets vulnerability details for findings.
`default BatchGetFreeTrialInfoResponse`	`batchGetFreeTrialInfo(Consumer<BatchGetFreeTrialInfoRequest.Builder> batchGetFreeTrialInfoRequest)`	Gets free trial status for multiple Amazon Web Services accounts.
`default BatchGetFreeTrialInfoResponse`	`batchGetFreeTrialInfo(BatchGetFreeTrialInfoRequest batchGetFreeTrialInfoRequest)`	Gets free trial status for multiple Amazon Web Services accounts.
`default BatchGetMemberEc2DeepInspectionStatusResponse`	`batchGetMemberEc2DeepInspectionStatus(Consumer<BatchGetMemberEc2DeepInspectionStatusRequest.Builder> batchGetMemberEc2DeepInspectionStatusRequest)`	Retrieves Amazon Inspector deep inspection activation status of multiple member accounts within your organization.
`default BatchGetMemberEc2DeepInspectionStatusResponse`	`batchGetMemberEc2DeepInspectionStatus(BatchGetMemberEc2DeepInspectionStatusRequest batchGetMemberEc2DeepInspectionStatusRequest)`	Retrieves Amazon Inspector deep inspection activation status of multiple member accounts within your organization.
`default BatchUpdateMemberEc2DeepInspectionStatusResponse`	`batchUpdateMemberEc2DeepInspectionStatus(Consumer<BatchUpdateMemberEc2DeepInspectionStatusRequest.Builder> batchUpdateMemberEc2DeepInspectionStatusRequest)`	Activates or deactivates Amazon Inspector deep inspection for the provided member accounts in your organization.
`default BatchUpdateMemberEc2DeepInspectionStatusResponse`	`batchUpdateMemberEc2DeepInspectionStatus(BatchUpdateMemberEc2DeepInspectionStatusRequest batchUpdateMemberEc2DeepInspectionStatusRequest)`	Activates or deactivates Amazon Inspector deep inspection for the provided member accounts in your organization.
`static Inspector2ClientBuilder`	`builder()`	Create a builder that can be used to configure and create a `Inspector2Client`.
`default CancelFindingsReportResponse`	`cancelFindingsReport(Consumer<CancelFindingsReportRequest.Builder> cancelFindingsReportRequest)`	Cancels the given findings report.
`default CancelFindingsReportResponse`	`cancelFindingsReport(CancelFindingsReportRequest cancelFindingsReportRequest)`	Cancels the given findings report.
`default CancelSbomExportResponse`	`cancelSbomExport(Consumer<CancelSbomExportRequest.Builder> cancelSbomExportRequest)`	Cancels a software bill of materials (SBOM) report.
`default CancelSbomExportResponse`	`cancelSbomExport(CancelSbomExportRequest cancelSbomExportRequest)`	Cancels a software bill of materials (SBOM) report.
`static Inspector2Client`	`create()`	Create a `Inspector2Client` with the region loaded from the `DefaultAwsRegionProviderChain` and credentials loaded from the `DefaultCredentialsProvider`.
`default CreateCisScanConfigurationResponse`	`createCisScanConfiguration(Consumer<CreateCisScanConfigurationRequest.Builder> createCisScanConfigurationRequest)`	Creates a CIS scan configuration.
`default CreateCisScanConfigurationResponse`	`createCisScanConfiguration(CreateCisScanConfigurationRequest createCisScanConfigurationRequest)`	Creates a CIS scan configuration.
`default CreateFilterResponse`	`createFilter(Consumer<CreateFilterRequest.Builder> createFilterRequest)`	Creates a filter resource using specified filter criteria.
`default CreateFilterResponse`	`createFilter(CreateFilterRequest createFilterRequest)`	Creates a filter resource using specified filter criteria.
`default CreateFindingsReportResponse`	`createFindingsReport(Consumer<CreateFindingsReportRequest.Builder> createFindingsReportRequest)`	Creates a finding report.
`default CreateFindingsReportResponse`	`createFindingsReport(CreateFindingsReportRequest createFindingsReportRequest)`	Creates a finding report.
`default CreateSbomExportResponse`	`createSbomExport(Consumer<CreateSbomExportRequest.Builder> createSbomExportRequest)`	Creates a software bill of materials (SBOM) report.
`default CreateSbomExportResponse`	`createSbomExport(CreateSbomExportRequest createSbomExportRequest)`	Creates a software bill of materials (SBOM) report.
`default DeleteCisScanConfigurationResponse`	`deleteCisScanConfiguration(Consumer<DeleteCisScanConfigurationRequest.Builder> deleteCisScanConfigurationRequest)`	Deletes a CIS scan configuration.
`default DeleteCisScanConfigurationResponse`	`deleteCisScanConfiguration(DeleteCisScanConfigurationRequest deleteCisScanConfigurationRequest)`	Deletes a CIS scan configuration.
`default DeleteFilterResponse`	`deleteFilter(Consumer<DeleteFilterRequest.Builder> deleteFilterRequest)`	Deletes a filter resource.
`default DeleteFilterResponse`	`deleteFilter(DeleteFilterRequest deleteFilterRequest)`	Deletes a filter resource.
`default DescribeOrganizationConfigurationResponse`	`describeOrganizationConfiguration(Consumer<DescribeOrganizationConfigurationRequest.Builder> describeOrganizationConfigurationRequest)`	Describe Amazon Inspector configuration settings for an Amazon Web Services organization.
`default DescribeOrganizationConfigurationResponse`	`describeOrganizationConfiguration(DescribeOrganizationConfigurationRequest describeOrganizationConfigurationRequest)`	Describe Amazon Inspector configuration settings for an Amazon Web Services organization.
`default DisableResponse`	`disable(Consumer<DisableRequest.Builder> disableRequest)`	Disables Amazon Inspector scans for one or more Amazon Web Services accounts.
`default DisableResponse`	`disable(DisableRequest disableRequest)`	Disables Amazon Inspector scans for one or more Amazon Web Services accounts.
`default DisableDelegatedAdminAccountResponse`	`disableDelegatedAdminAccount(Consumer<DisableDelegatedAdminAccountRequest.Builder> disableDelegatedAdminAccountRequest)`	Disables the Amazon Inspector delegated administrator for your organization.
`default DisableDelegatedAdminAccountResponse`	`disableDelegatedAdminAccount(DisableDelegatedAdminAccountRequest disableDelegatedAdminAccountRequest)`	Disables the Amazon Inspector delegated administrator for your organization.
`default DisassociateMemberResponse`	`disassociateMember(Consumer<DisassociateMemberRequest.Builder> disassociateMemberRequest)`	Disassociates a member account from an Amazon Inspector delegated administrator.
`default DisassociateMemberResponse`	`disassociateMember(DisassociateMemberRequest disassociateMemberRequest)`	Disassociates a member account from an Amazon Inspector delegated administrator.
`default EnableResponse`	`enable(Consumer<EnableRequest.Builder> enableRequest)`	Enables Amazon Inspector scans for one or more Amazon Web Services accounts.
`default EnableResponse`	`enable(EnableRequest enableRequest)`	Enables Amazon Inspector scans for one or more Amazon Web Services accounts.
`default EnableDelegatedAdminAccountResponse`	`enableDelegatedAdminAccount(Consumer<EnableDelegatedAdminAccountRequest.Builder> enableDelegatedAdminAccountRequest)`	Enables the Amazon Inspector delegated administrator for your Organizations organization.
`default EnableDelegatedAdminAccountResponse`	`enableDelegatedAdminAccount(EnableDelegatedAdminAccountRequest enableDelegatedAdminAccountRequest)`	Enables the Amazon Inspector delegated administrator for your Organizations organization.
`default GetCisScanReportResponse`	`getCisScanReport(Consumer<GetCisScanReportRequest.Builder> getCisScanReportRequest)`	Retrieves a CIS scan report.
`default GetCisScanReportResponse`	`getCisScanReport(GetCisScanReportRequest getCisScanReportRequest)`	Retrieves a CIS scan report.
`default GetCisScanResultDetailsResponse`	`getCisScanResultDetails(Consumer<GetCisScanResultDetailsRequest.Builder> getCisScanResultDetailsRequest)`	Retrieves CIS scan result details.
`default GetCisScanResultDetailsResponse`	`getCisScanResultDetails(GetCisScanResultDetailsRequest getCisScanResultDetailsRequest)`	Retrieves CIS scan result details.
`default GetCisScanResultDetailsIterable`	`getCisScanResultDetailsPaginator(Consumer<GetCisScanResultDetailsRequest.Builder> getCisScanResultDetailsRequest)`	This is a variant of `getCisScanResultDetails(software.amazon.awssdk.services.inspector2.model.GetCisScanResultDetailsRequest)` operation.
`default GetCisScanResultDetailsIterable`	`getCisScanResultDetailsPaginator(GetCisScanResultDetailsRequest getCisScanResultDetailsRequest)`	This is a variant of `getCisScanResultDetails(software.amazon.awssdk.services.inspector2.model.GetCisScanResultDetailsRequest)` operation.
`default GetConfigurationResponse`	`getConfiguration(Consumer<GetConfigurationRequest.Builder> getConfigurationRequest)`	Retrieves setting configurations for Inspector scans.
`default GetConfigurationResponse`	`getConfiguration(GetConfigurationRequest getConfigurationRequest)`	Retrieves setting configurations for Inspector scans.
`default GetDelegatedAdminAccountResponse`	`getDelegatedAdminAccount(Consumer<GetDelegatedAdminAccountRequest.Builder> getDelegatedAdminAccountRequest)`	Retrieves information about the Amazon Inspector delegated administrator for your organization.
`default GetDelegatedAdminAccountResponse`	`getDelegatedAdminAccount(GetDelegatedAdminAccountRequest getDelegatedAdminAccountRequest)`	Retrieves information about the Amazon Inspector delegated administrator for your organization.
`default GetEc2DeepInspectionConfigurationResponse`	`getEc2DeepInspectionConfiguration(Consumer<GetEc2DeepInspectionConfigurationRequest.Builder> getEc2DeepInspectionConfigurationRequest)`	Retrieves the activation status of Amazon Inspector deep inspection and custom paths associated with your account.
`default GetEc2DeepInspectionConfigurationResponse`	`getEc2DeepInspectionConfiguration(GetEc2DeepInspectionConfigurationRequest getEc2DeepInspectionConfigurationRequest)`	Retrieves the activation status of Amazon Inspector deep inspection and custom paths associated with your account.
`default GetEncryptionKeyResponse`	`getEncryptionKey(Consumer<GetEncryptionKeyRequest.Builder> getEncryptionKeyRequest)`	Gets an encryption key.
`default GetEncryptionKeyResponse`	`getEncryptionKey(GetEncryptionKeyRequest getEncryptionKeyRequest)`	Gets an encryption key.
`default GetFindingsReportStatusResponse`	`getFindingsReportStatus(Consumer<GetFindingsReportStatusRequest.Builder> getFindingsReportStatusRequest)`	Gets the status of a findings report.
`default GetFindingsReportStatusResponse`	`getFindingsReportStatus(GetFindingsReportStatusRequest getFindingsReportStatusRequest)`	Gets the status of a findings report.
`default GetMemberResponse`	`getMember(Consumer<GetMemberRequest.Builder> getMemberRequest)`	Gets member information for your organization.
`default GetMemberResponse`	`getMember(GetMemberRequest getMemberRequest)`	Gets member information for your organization.
`default GetSbomExportResponse`	`getSbomExport(Consumer<GetSbomExportRequest.Builder> getSbomExportRequest)`	Gets details of a software bill of materials (SBOM) report.
`default GetSbomExportResponse`	`getSbomExport(GetSbomExportRequest getSbomExportRequest)`	Gets details of a software bill of materials (SBOM) report.
`default ListAccountPermissionsResponse`	`listAccountPermissions(Consumer<ListAccountPermissionsRequest.Builder> listAccountPermissionsRequest)`	Lists the permissions an account has to configure Amazon Inspector.
`default ListAccountPermissionsResponse`	`listAccountPermissions(ListAccountPermissionsRequest listAccountPermissionsRequest)`	Lists the permissions an account has to configure Amazon Inspector.
`default ListAccountPermissionsIterable`	`listAccountPermissionsPaginator(Consumer<ListAccountPermissionsRequest.Builder> listAccountPermissionsRequest)`	This is a variant of `listAccountPermissions(software.amazon.awssdk.services.inspector2.model.ListAccountPermissionsRequest)` operation.
`default ListAccountPermissionsIterable`	`listAccountPermissionsPaginator(ListAccountPermissionsRequest listAccountPermissionsRequest)`	This is a variant of `listAccountPermissions(software.amazon.awssdk.services.inspector2.model.ListAccountPermissionsRequest)` operation.
`default ListCisScanConfigurationsResponse`	`listCisScanConfigurations(Consumer<ListCisScanConfigurationsRequest.Builder> listCisScanConfigurationsRequest)`	Lists CIS scan configurations.
`default ListCisScanConfigurationsResponse`	`listCisScanConfigurations(ListCisScanConfigurationsRequest listCisScanConfigurationsRequest)`	Lists CIS scan configurations.
`default ListCisScanConfigurationsIterable`	`listCisScanConfigurationsPaginator(Consumer<ListCisScanConfigurationsRequest.Builder> listCisScanConfigurationsRequest)`	This is a variant of `listCisScanConfigurations(software.amazon.awssdk.services.inspector2.model.ListCisScanConfigurationsRequest)` operation.
`default ListCisScanConfigurationsIterable`	`listCisScanConfigurationsPaginator(ListCisScanConfigurationsRequest listCisScanConfigurationsRequest)`	This is a variant of `listCisScanConfigurations(software.amazon.awssdk.services.inspector2.model.ListCisScanConfigurationsRequest)` operation.
`default ListCisScanResultsAggregatedByChecksResponse`	`listCisScanResultsAggregatedByChecks(Consumer<ListCisScanResultsAggregatedByChecksRequest.Builder> listCisScanResultsAggregatedByChecksRequest)`	Lists scan results aggregated by checks.
`default ListCisScanResultsAggregatedByChecksResponse`	`listCisScanResultsAggregatedByChecks(ListCisScanResultsAggregatedByChecksRequest listCisScanResultsAggregatedByChecksRequest)`	Lists scan results aggregated by checks.
`default ListCisScanResultsAggregatedByChecksIterable`	`listCisScanResultsAggregatedByChecksPaginator(Consumer<ListCisScanResultsAggregatedByChecksRequest.Builder> listCisScanResultsAggregatedByChecksRequest)`	This is a variant of `listCisScanResultsAggregatedByChecks(software.amazon.awssdk.services.inspector2.model.ListCisScanResultsAggregatedByChecksRequest)` operation.
`default ListCisScanResultsAggregatedByChecksIterable`	`listCisScanResultsAggregatedByChecksPaginator(ListCisScanResultsAggregatedByChecksRequest listCisScanResultsAggregatedByChecksRequest)`	This is a variant of `listCisScanResultsAggregatedByChecks(software.amazon.awssdk.services.inspector2.model.ListCisScanResultsAggregatedByChecksRequest)` operation.
`default ListCisScanResultsAggregatedByTargetResourceResponse`	`listCisScanResultsAggregatedByTargetResource(Consumer<ListCisScanResultsAggregatedByTargetResourceRequest.Builder> listCisScanResultsAggregatedByTargetResourceRequest)`	Lists scan results aggregated by a target resource.
`default ListCisScanResultsAggregatedByTargetResourceResponse`	`listCisScanResultsAggregatedByTargetResource(ListCisScanResultsAggregatedByTargetResourceRequest listCisScanResultsAggregatedByTargetResourceRequest)`	Lists scan results aggregated by a target resource.
`default ListCisScanResultsAggregatedByTargetResourceIterable`	`listCisScanResultsAggregatedByTargetResourcePaginator(Consumer<ListCisScanResultsAggregatedByTargetResourceRequest.Builder> listCisScanResultsAggregatedByTargetResourceRequest)`	This is a variant of `listCisScanResultsAggregatedByTargetResource(software.amazon.awssdk.services.inspector2.model.ListCisScanResultsAggregatedByTargetResourceRequest)` operation.
`default ListCisScanResultsAggregatedByTargetResourceIterable`	`listCisScanResultsAggregatedByTargetResourcePaginator(ListCisScanResultsAggregatedByTargetResourceRequest listCisScanResultsAggregatedByTargetResourceRequest)`	This is a variant of `listCisScanResultsAggregatedByTargetResource(software.amazon.awssdk.services.inspector2.model.ListCisScanResultsAggregatedByTargetResourceRequest)` operation.
`default ListCisScansResponse`	`listCisScans(Consumer<ListCisScansRequest.Builder> listCisScansRequest)`	Returns a CIS scan list.
`default ListCisScansResponse`	`listCisScans(ListCisScansRequest listCisScansRequest)`	Returns a CIS scan list.
`default ListCisScansIterable`	`listCisScansPaginator(Consumer<ListCisScansRequest.Builder> listCisScansRequest)`	This is a variant of `listCisScans(software.amazon.awssdk.services.inspector2.model.ListCisScansRequest)` operation.
`default ListCisScansIterable`	`listCisScansPaginator(ListCisScansRequest listCisScansRequest)`	This is a variant of `listCisScans(software.amazon.awssdk.services.inspector2.model.ListCisScansRequest)` operation.
`default ListCoverageResponse`	`listCoverage(Consumer<ListCoverageRequest.Builder> listCoverageRequest)`	Lists coverage details for you environment.
`default ListCoverageResponse`	`listCoverage(ListCoverageRequest listCoverageRequest)`	Lists coverage details for you environment.
`default ListCoverageIterable`	`listCoveragePaginator(Consumer<ListCoverageRequest.Builder> listCoverageRequest)`	This is a variant of `listCoverage(software.amazon.awssdk.services.inspector2.model.ListCoverageRequest)` operation.
`default ListCoverageIterable`	`listCoveragePaginator(ListCoverageRequest listCoverageRequest)`	This is a variant of `listCoverage(software.amazon.awssdk.services.inspector2.model.ListCoverageRequest)` operation.
`default ListCoverageStatisticsResponse`	`listCoverageStatistics(Consumer<ListCoverageStatisticsRequest.Builder> listCoverageStatisticsRequest)`	Lists Amazon Inspector coverage statistics for your environment.
`default ListCoverageStatisticsResponse`	`listCoverageStatistics(ListCoverageStatisticsRequest listCoverageStatisticsRequest)`	Lists Amazon Inspector coverage statistics for your environment.
`default ListCoverageStatisticsIterable`	`listCoverageStatisticsPaginator(Consumer<ListCoverageStatisticsRequest.Builder> listCoverageStatisticsRequest)`	This is a variant of `listCoverageStatistics(software.amazon.awssdk.services.inspector2.model.ListCoverageStatisticsRequest)` operation.
`default ListCoverageStatisticsIterable`	`listCoverageStatisticsPaginator(ListCoverageStatisticsRequest listCoverageStatisticsRequest)`	This is a variant of `listCoverageStatistics(software.amazon.awssdk.services.inspector2.model.ListCoverageStatisticsRequest)` operation.
`default ListDelegatedAdminAccountsResponse`	`listDelegatedAdminAccounts(Consumer<ListDelegatedAdminAccountsRequest.Builder> listDelegatedAdminAccountsRequest)`	Lists information about the Amazon Inspector delegated administrator of your organization.
`default ListDelegatedAdminAccountsResponse`	`listDelegatedAdminAccounts(ListDelegatedAdminAccountsRequest listDelegatedAdminAccountsRequest)`	Lists information about the Amazon Inspector delegated administrator of your organization.
`default ListDelegatedAdminAccountsIterable`	`listDelegatedAdminAccountsPaginator(Consumer<ListDelegatedAdminAccountsRequest.Builder> listDelegatedAdminAccountsRequest)`	This is a variant of `listDelegatedAdminAccounts(software.amazon.awssdk.services.inspector2.model.ListDelegatedAdminAccountsRequest)` operation.
`default ListDelegatedAdminAccountsIterable`	`listDelegatedAdminAccountsPaginator(ListDelegatedAdminAccountsRequest listDelegatedAdminAccountsRequest)`	This is a variant of `listDelegatedAdminAccounts(software.amazon.awssdk.services.inspector2.model.ListDelegatedAdminAccountsRequest)` operation.
`default ListFiltersResponse`	`listFilters(Consumer<ListFiltersRequest.Builder> listFiltersRequest)`	Lists the filters associated with your account.
`default ListFiltersResponse`	`listFilters(ListFiltersRequest listFiltersRequest)`	Lists the filters associated with your account.
`default ListFiltersIterable`	`listFiltersPaginator(Consumer<ListFiltersRequest.Builder> listFiltersRequest)`	This is a variant of `listFilters(software.amazon.awssdk.services.inspector2.model.ListFiltersRequest)` operation.
`default ListFiltersIterable`	`listFiltersPaginator(ListFiltersRequest listFiltersRequest)`	This is a variant of `listFilters(software.amazon.awssdk.services.inspector2.model.ListFiltersRequest)` operation.
`default ListFindingAggregationsResponse`	`listFindingAggregations(Consumer<ListFindingAggregationsRequest.Builder> listFindingAggregationsRequest)`	Lists aggregated finding data for your environment based on specific criteria.
`default ListFindingAggregationsResponse`	`listFindingAggregations(ListFindingAggregationsRequest listFindingAggregationsRequest)`	Lists aggregated finding data for your environment based on specific criteria.
`default ListFindingAggregationsIterable`	`listFindingAggregationsPaginator(Consumer<ListFindingAggregationsRequest.Builder> listFindingAggregationsRequest)`	This is a variant of `listFindingAggregations(software.amazon.awssdk.services.inspector2.model.ListFindingAggregationsRequest)` operation.
`default ListFindingAggregationsIterable`	`listFindingAggregationsPaginator(ListFindingAggregationsRequest listFindingAggregationsRequest)`	This is a variant of `listFindingAggregations(software.amazon.awssdk.services.inspector2.model.ListFindingAggregationsRequest)` operation.
`default ListFindingsResponse`	`listFindings(Consumer<ListFindingsRequest.Builder> listFindingsRequest)`	Lists findings for your environment.
`default ListFindingsResponse`	`listFindings(ListFindingsRequest listFindingsRequest)`	Lists findings for your environment.
`default ListFindingsIterable`	`listFindingsPaginator(Consumer<ListFindingsRequest.Builder> listFindingsRequest)`	This is a variant of `listFindings(software.amazon.awssdk.services.inspector2.model.ListFindingsRequest)` operation.
`default ListFindingsIterable`	`listFindingsPaginator(ListFindingsRequest listFindingsRequest)`	This is a variant of `listFindings(software.amazon.awssdk.services.inspector2.model.ListFindingsRequest)` operation.
`default ListMembersResponse`	`listMembers(Consumer<ListMembersRequest.Builder> listMembersRequest)`	List members associated with the Amazon Inspector delegated administrator for your organization.
`default ListMembersResponse`	`listMembers(ListMembersRequest listMembersRequest)`	List members associated with the Amazon Inspector delegated administrator for your organization.
`default ListMembersIterable`	`listMembersPaginator(Consumer<ListMembersRequest.Builder> listMembersRequest)`	This is a variant of `listMembers(software.amazon.awssdk.services.inspector2.model.ListMembersRequest)` operation.
`default ListMembersIterable`	`listMembersPaginator(ListMembersRequest listMembersRequest)`	This is a variant of `listMembers(software.amazon.awssdk.services.inspector2.model.ListMembersRequest)` operation.
`default ListTagsForResourceResponse`	`listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)`	Lists all tags attached to a given resource.
`default ListTagsForResourceResponse`	`listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)`	Lists all tags attached to a given resource.
`default ListUsageTotalsResponse`	`listUsageTotals(Consumer<ListUsageTotalsRequest.Builder> listUsageTotalsRequest)`	Lists the Amazon Inspector usage totals over the last 30 days.
`default ListUsageTotalsResponse`	`listUsageTotals(ListUsageTotalsRequest listUsageTotalsRequest)`	Lists the Amazon Inspector usage totals over the last 30 days.
`default ListUsageTotalsIterable`	`listUsageTotalsPaginator(Consumer<ListUsageTotalsRequest.Builder> listUsageTotalsRequest)`	This is a variant of `listUsageTotals(software.amazon.awssdk.services.inspector2.model.ListUsageTotalsRequest)` operation.
`default ListUsageTotalsIterable`	`listUsageTotalsPaginator(ListUsageTotalsRequest listUsageTotalsRequest)`	This is a variant of `listUsageTotals(software.amazon.awssdk.services.inspector2.model.ListUsageTotalsRequest)` operation.
`default ResetEncryptionKeyResponse`	`resetEncryptionKey(Consumer<ResetEncryptionKeyRequest.Builder> resetEncryptionKeyRequest)`	Resets an encryption key.
`default ResetEncryptionKeyResponse`	`resetEncryptionKey(ResetEncryptionKeyRequest resetEncryptionKeyRequest)`	Resets an encryption key.
`default SearchVulnerabilitiesResponse`	`searchVulnerabilities(Consumer<SearchVulnerabilitiesRequest.Builder> searchVulnerabilitiesRequest)`	Lists Amazon Inspector coverage details for a specific vulnerability.
`default SearchVulnerabilitiesResponse`	`searchVulnerabilities(SearchVulnerabilitiesRequest searchVulnerabilitiesRequest)`	Lists Amazon Inspector coverage details for a specific vulnerability.
`default SearchVulnerabilitiesIterable`	`searchVulnerabilitiesPaginator(Consumer<SearchVulnerabilitiesRequest.Builder> searchVulnerabilitiesRequest)`	This is a variant of `searchVulnerabilities(software.amazon.awssdk.services.inspector2.model.SearchVulnerabilitiesRequest)` operation.
`default SearchVulnerabilitiesIterable`	`searchVulnerabilitiesPaginator(SearchVulnerabilitiesRequest searchVulnerabilitiesRequest)`	This is a variant of `searchVulnerabilities(software.amazon.awssdk.services.inspector2.model.SearchVulnerabilitiesRequest)` operation.
`default SendCisSessionHealthResponse`	`sendCisSessionHealth(Consumer<SendCisSessionHealthRequest.Builder> sendCisSessionHealthRequest)`	Sends a CIS session health.
`default SendCisSessionHealthResponse`	`sendCisSessionHealth(SendCisSessionHealthRequest sendCisSessionHealthRequest)`	Sends a CIS session health.
`default SendCisSessionTelemetryResponse`	`sendCisSessionTelemetry(Consumer<SendCisSessionTelemetryRequest.Builder> sendCisSessionTelemetryRequest)`	Sends a CIS session telemetry.
`default SendCisSessionTelemetryResponse`	`sendCisSessionTelemetry(SendCisSessionTelemetryRequest sendCisSessionTelemetryRequest)`	Sends a CIS session telemetry.
`default Inspector2ServiceClientConfiguration`	`serviceClientConfiguration()`
`static ServiceMetadata`	`serviceMetadata()`
`default StartCisSessionResponse`	`startCisSession(Consumer<StartCisSessionRequest.Builder> startCisSessionRequest)`	Starts a CIS session.
`default StartCisSessionResponse`	`startCisSession(StartCisSessionRequest startCisSessionRequest)`	Starts a CIS session.
`default StopCisSessionResponse`	`stopCisSession(Consumer<StopCisSessionRequest.Builder> stopCisSessionRequest)`	Stops a CIS session.
`default StopCisSessionResponse`	`stopCisSession(StopCisSessionRequest stopCisSessionRequest)`	Stops a CIS session.
`default TagResourceResponse`	`tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)`	Adds tags to a resource.
`default TagResourceResponse`	`tagResource(TagResourceRequest tagResourceRequest)`	Adds tags to a resource.
`default UntagResourceResponse`	`untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)`	Removes tags from a resource.
`default UntagResourceResponse`	`untagResource(UntagResourceRequest untagResourceRequest)`	Removes tags from a resource.
`default UpdateCisScanConfigurationResponse`	`updateCisScanConfiguration(Consumer<UpdateCisScanConfigurationRequest.Builder> updateCisScanConfigurationRequest)`	Updates a CIS scan configuration.
`default UpdateCisScanConfigurationResponse`	`updateCisScanConfiguration(UpdateCisScanConfigurationRequest updateCisScanConfigurationRequest)`	Updates a CIS scan configuration.
`default UpdateConfigurationResponse`	`updateConfiguration(Consumer<UpdateConfigurationRequest.Builder> updateConfigurationRequest)`	Updates setting configurations for your Amazon Inspector account.
`default UpdateConfigurationResponse`	`updateConfiguration(UpdateConfigurationRequest updateConfigurationRequest)`	Updates setting configurations for your Amazon Inspector account.
`default UpdateEc2DeepInspectionConfigurationResponse`	`updateEc2DeepInspectionConfiguration(Consumer<UpdateEc2DeepInspectionConfigurationRequest.Builder> updateEc2DeepInspectionConfigurationRequest)`	Activates, deactivates Amazon Inspector deep inspection, or updates custom paths for your account.
`default UpdateEc2DeepInspectionConfigurationResponse`	`updateEc2DeepInspectionConfiguration(UpdateEc2DeepInspectionConfigurationRequest updateEc2DeepInspectionConfigurationRequest)`	Activates, deactivates Amazon Inspector deep inspection, or updates custom paths for your account.
`default UpdateEncryptionKeyResponse`	`updateEncryptionKey(Consumer<UpdateEncryptionKeyRequest.Builder> updateEncryptionKeyRequest)`	Updates an encryption key.
`default UpdateEncryptionKeyResponse`	`updateEncryptionKey(UpdateEncryptionKeyRequest updateEncryptionKeyRequest)`	Updates an encryption key.
`default UpdateFilterResponse`	`updateFilter(Consumer<UpdateFilterRequest.Builder> updateFilterRequest)`	Specifies the action that is to be applied to the findings that match the filter.
`default UpdateFilterResponse`	`updateFilter(UpdateFilterRequest updateFilterRequest)`	Specifies the action that is to be applied to the findings that match the filter.
`default UpdateOrganizationConfigurationResponse`	`updateOrganizationConfiguration(Consumer<UpdateOrganizationConfigurationRequest.Builder> updateOrganizationConfigurationRequest)`	Updates the configurations for your Amazon Inspector organization.
`default UpdateOrganizationConfigurationResponse`	`updateOrganizationConfiguration(UpdateOrganizationConfigurationRequest updateOrganizationConfigurationRequest)`	Updates the configurations for your Amazon Inspector organization.
`default UpdateOrgEc2DeepInspectionConfigurationResponse`	`updateOrgEc2DeepInspectionConfiguration(Consumer<UpdateOrgEc2DeepInspectionConfigurationRequest.Builder> updateOrgEc2DeepInspectionConfigurationRequest)`	Updates the Amazon Inspector deep inspection custom paths for your organization.
`default UpdateOrgEc2DeepInspectionConfigurationResponse`	`updateOrgEc2DeepInspectionConfiguration(UpdateOrgEc2DeepInspectionConfigurationRequest updateOrgEc2DeepInspectionConfigurationRequest)`	Updates the Amazon Inspector deep inspection custom paths for your organization.

Methods inherited from interface software.amazon.awssdk.utils.SdkAutoCloseable
close

Methods inherited from interface software.amazon.awssdk.core.SdkClient
serviceName

- Field Detail
  - SERVICE_NAME
```
static final String SERVICE_NAME
```
    See Also:
    
    Constant Field Values
  - SERVICE_METADATA_ID
```
static final String SERVICE_METADATA_ID
```
    Value for looking up the service's metadata from the ServiceMetadataProvider.
    
    See Also:
    
    Constant Field Values
- Method Detail
  - associateMember
```
default AssociateMemberResponse associateMember(AssociateMemberRequest associateMemberRequest)
                                         throws ValidationException,
                                                AccessDeniedException,
                                                ThrottlingException,
                                                InternalServerException,
                                                AwsServiceException,
                                                SdkClientException,
                                                Inspector2Exception
```
    Associates an Amazon Web Services account with an Amazon Inspector delegated administrator. An HTTP 200 response indicates the association was successfully started, but doesn’t indicate whether it was completed. You can check if the association completed by using ListMembers for multiple accounts or GetMembers for a single account.
    
    Parameters:
    
    associateMemberRequest -
    
    Returns:
    
    Result of the AssociateMember operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - associateMember
```
default AssociateMemberResponse associateMember(Consumer<AssociateMemberRequest.Builder> associateMemberRequest)
                                         throws ValidationException,
                                                AccessDeniedException,
                                                ThrottlingException,
                                                InternalServerException,
                                                AwsServiceException,
                                                SdkClientException,
                                                Inspector2Exception
```
    Associates an Amazon Web Services account with an Amazon Inspector delegated administrator. An HTTP 200 response indicates the association was successfully started, but doesn’t indicate whether it was completed. You can check if the association completed by using ListMembers for multiple accounts or GetMembers for a single account.
    
    This is a convenience which creates an instance of the AssociateMemberRequest.Builder avoiding the need to create one manually via AssociateMemberRequest.builder()
    
    Parameters:
    
    associateMemberRequest - A Consumer that will call methods on AssociateMemberRequest.Builder to create a request.
    
    Returns:
    
    Result of the AssociateMember operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchGetAccountStatus
```
default BatchGetAccountStatusResponse batchGetAccountStatus(BatchGetAccountStatusRequest batchGetAccountStatusRequest)
                                                     throws ValidationException,
                                                            AccessDeniedException,
                                                            ResourceNotFoundException,
                                                            ThrottlingException,
                                                            InternalServerException,
                                                            AwsServiceException,
                                                            SdkClientException,
                                                            Inspector2Exception
```
    Retrieves the Amazon Inspector status of multiple Amazon Web Services accounts within your environment.
    
    Parameters:
    
    batchGetAccountStatusRequest -
    
    Returns:
    
    Result of the BatchGetAccountStatus operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchGetAccountStatus
```
default BatchGetAccountStatusResponse batchGetAccountStatus(Consumer<BatchGetAccountStatusRequest.Builder> batchGetAccountStatusRequest)
                                                     throws ValidationException,
                                                            AccessDeniedException,
                                                            ResourceNotFoundException,
                                                            ThrottlingException,
                                                            InternalServerException,
                                                            AwsServiceException,
                                                            SdkClientException,
                                                            Inspector2Exception
```
    Retrieves the Amazon Inspector status of multiple Amazon Web Services accounts within your environment.
    
    This is a convenience which creates an instance of the BatchGetAccountStatusRequest.Builder avoiding the need to create one manually via BatchGetAccountStatusRequest.builder()
    
    Parameters:
    
    batchGetAccountStatusRequest - A Consumer that will call methods on BatchGetAccountStatusRequest.Builder to create a request.
    
    Returns:
    
    Result of the BatchGetAccountStatus operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchGetCodeSnippet
```
default BatchGetCodeSnippetResponse batchGetCodeSnippet(BatchGetCodeSnippetRequest batchGetCodeSnippetRequest)
                                                 throws ValidationException,
                                                        AccessDeniedException,
                                                        ThrottlingException,
                                                        InternalServerException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        Inspector2Exception
```
    Retrieves code snippets from findings that Amazon Inspector detected code vulnerabilities in.
    
    Parameters:
    
    batchGetCodeSnippetRequest -
    
    Returns:
    
    Result of the BatchGetCodeSnippet operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchGetCodeSnippet
```
default BatchGetCodeSnippetResponse batchGetCodeSnippet(Consumer<BatchGetCodeSnippetRequest.Builder> batchGetCodeSnippetRequest)
                                                 throws ValidationException,
                                                        AccessDeniedException,
                                                        ThrottlingException,
                                                        InternalServerException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        Inspector2Exception
```
    Retrieves code snippets from findings that Amazon Inspector detected code vulnerabilities in.
    
    This is a convenience which creates an instance of the BatchGetCodeSnippetRequest.Builder avoiding the need to create one manually via BatchGetCodeSnippetRequest.builder()
    
    Parameters:
    
    batchGetCodeSnippetRequest - A Consumer that will call methods on BatchGetCodeSnippetRequest.Builder to create a request.
    
    Returns:
    
    Result of the BatchGetCodeSnippet operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchGetFindingDetails
```
default BatchGetFindingDetailsResponse batchGetFindingDetails(BatchGetFindingDetailsRequest batchGetFindingDetailsRequest)
                                                       throws ValidationException,
                                                              AccessDeniedException,
                                                              ThrottlingException,
                                                              InternalServerException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              Inspector2Exception
```
    Gets vulnerability details for findings.
    
    Parameters:
    
    batchGetFindingDetailsRequest -
    
    Returns:
    
    Result of the BatchGetFindingDetails operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchGetFindingDetails
```
default BatchGetFindingDetailsResponse batchGetFindingDetails(Consumer<BatchGetFindingDetailsRequest.Builder> batchGetFindingDetailsRequest)
                                                       throws ValidationException,
                                                              AccessDeniedException,
                                                              ThrottlingException,
                                                              InternalServerException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              Inspector2Exception
```
    Gets vulnerability details for findings.
    
    This is a convenience which creates an instance of the BatchGetFindingDetailsRequest.Builder avoiding the need to create one manually via BatchGetFindingDetailsRequest.builder()
    
    Parameters:
    
    batchGetFindingDetailsRequest - A Consumer that will call methods on BatchGetFindingDetailsRequest.Builder to create a request.
    
    Returns:
    
    Result of the BatchGetFindingDetails operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchGetFreeTrialInfo
```
default BatchGetFreeTrialInfoResponse batchGetFreeTrialInfo(BatchGetFreeTrialInfoRequest batchGetFreeTrialInfoRequest)
                                                     throws ValidationException,
                                                            AccessDeniedException,
                                                            ThrottlingException,
                                                            InternalServerException,
                                                            AwsServiceException,
                                                            SdkClientException,
                                                            Inspector2Exception
```
    Gets free trial status for multiple Amazon Web Services accounts.
    
    Parameters:
    
    batchGetFreeTrialInfoRequest -
    
    Returns:
    
    Result of the BatchGetFreeTrialInfo operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchGetFreeTrialInfo
```
default BatchGetFreeTrialInfoResponse batchGetFreeTrialInfo(Consumer<BatchGetFreeTrialInfoRequest.Builder> batchGetFreeTrialInfoRequest)
                                                     throws ValidationException,
                                                            AccessDeniedException,
                                                            ThrottlingException,
                                                            InternalServerException,
                                                            AwsServiceException,
                                                            SdkClientException,
                                                            Inspector2Exception
```
    Gets free trial status for multiple Amazon Web Services accounts.
    
    This is a convenience which creates an instance of the BatchGetFreeTrialInfoRequest.Builder avoiding the need to create one manually via BatchGetFreeTrialInfoRequest.builder()
    
    Parameters:
    
    batchGetFreeTrialInfoRequest - A Consumer that will call methods on BatchGetFreeTrialInfoRequest.Builder to create a request.
    
    Returns:
    
    Result of the BatchGetFreeTrialInfo operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchGetMemberEc2DeepInspectionStatus
```
default BatchGetMemberEc2DeepInspectionStatusResponse batchGetMemberEc2DeepInspectionStatus(BatchGetMemberEc2DeepInspectionStatusRequest batchGetMemberEc2DeepInspectionStatusRequest)
                                                                                     throws ValidationException,
                                                                                            AccessDeniedException,
                                                                                            ThrottlingException,
                                                                                            InternalServerException,
                                                                                            AwsServiceException,
                                                                                            SdkClientException,
                                                                                            Inspector2Exception
```
    Retrieves Amazon Inspector deep inspection activation status of multiple member accounts within your organization. You must be the delegated administrator of an organization in Amazon Inspector to use this API.
    
    Parameters:
    
    batchGetMemberEc2DeepInspectionStatusRequest -
    
    Returns:
    
    Result of the BatchGetMemberEc2DeepInspectionStatus operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchGetMemberEc2DeepInspectionStatus
```
default BatchGetMemberEc2DeepInspectionStatusResponse batchGetMemberEc2DeepInspectionStatus(Consumer<BatchGetMemberEc2DeepInspectionStatusRequest.Builder> batchGetMemberEc2DeepInspectionStatusRequest)
                                                                                     throws ValidationException,
                                                                                            AccessDeniedException,
                                                                                            ThrottlingException,
                                                                                            InternalServerException,
                                                                                            AwsServiceException,
                                                                                            SdkClientException,
                                                                                            Inspector2Exception
```
    Retrieves Amazon Inspector deep inspection activation status of multiple member accounts within your organization. You must be the delegated administrator of an organization in Amazon Inspector to use this API.
    
    This is a convenience which creates an instance of the BatchGetMemberEc2DeepInspectionStatusRequest.Builder avoiding the need to create one manually via BatchGetMemberEc2DeepInspectionStatusRequest.builder()
    
    Parameters:
    
    batchGetMemberEc2DeepInspectionStatusRequest - A Consumer that will call methods on BatchGetMemberEc2DeepInspectionStatusRequest.Builder to create a request.
    
    Returns:
    
    Result of the BatchGetMemberEc2DeepInspectionStatus operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchUpdateMemberEc2DeepInspectionStatus
```
default BatchUpdateMemberEc2DeepInspectionStatusResponse batchUpdateMemberEc2DeepInspectionStatus(BatchUpdateMemberEc2DeepInspectionStatusRequest batchUpdateMemberEc2DeepInspectionStatusRequest)
                                                                                           throws ValidationException,
                                                                                                  AccessDeniedException,
                                                                                                  ThrottlingException,
                                                                                                  InternalServerException,
                                                                                                  AwsServiceException,
                                                                                                  SdkClientException,
                                                                                                  Inspector2Exception
```
    Activates or deactivates Amazon Inspector deep inspection for the provided member accounts in your organization. You must be the delegated administrator of an organization in Amazon Inspector to use this API.
    
    Parameters:
    
    batchUpdateMemberEc2DeepInspectionStatusRequest -
    
    Returns:
    
    Result of the BatchUpdateMemberEc2DeepInspectionStatus operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - batchUpdateMemberEc2DeepInspectionStatus
```
default BatchUpdateMemberEc2DeepInspectionStatusResponse batchUpdateMemberEc2DeepInspectionStatus(Consumer<BatchUpdateMemberEc2DeepInspectionStatusRequest.Builder> batchUpdateMemberEc2DeepInspectionStatusRequest)
                                                                                           throws ValidationException,
                                                                                                  AccessDeniedException,
                                                                                                  ThrottlingException,
                                                                                                  InternalServerException,
                                                                                                  AwsServiceException,
                                                                                                  SdkClientException,
                                                                                                  Inspector2Exception
```
    Activates or deactivates Amazon Inspector deep inspection for the provided member accounts in your organization. You must be the delegated administrator of an organization in Amazon Inspector to use this API.
    
    This is a convenience which creates an instance of the BatchUpdateMemberEc2DeepInspectionStatusRequest.Builder avoiding the need to create one manually via BatchUpdateMemberEc2DeepInspectionStatusRequest.builder()
    
    Parameters:
    
    batchUpdateMemberEc2DeepInspectionStatusRequest - A Consumer that will call methods on BatchUpdateMemberEc2DeepInspectionStatusRequest.Builder to create a request.
    
    Returns:
    
    Result of the BatchUpdateMemberEc2DeepInspectionStatus operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - cancelFindingsReport
```
default CancelFindingsReportResponse cancelFindingsReport(CancelFindingsReportRequest cancelFindingsReportRequest)
                                                   throws ValidationException,
                                                          AccessDeniedException,
                                                          ResourceNotFoundException,
                                                          ThrottlingException,
                                                          InternalServerException,
                                                          AwsServiceException,
                                                          SdkClientException,
                                                          Inspector2Exception
```
    Cancels the given findings report.
    
    Parameters:
    
    cancelFindingsReportRequest -
    
    Returns:
    
    Result of the CancelFindingsReport operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - cancelFindingsReport
```
default CancelFindingsReportResponse cancelFindingsReport(Consumer<CancelFindingsReportRequest.Builder> cancelFindingsReportRequest)
                                                   throws ValidationException,
                                                          AccessDeniedException,
                                                          ResourceNotFoundException,
                                                          ThrottlingException,
                                                          InternalServerException,
                                                          AwsServiceException,
                                                          SdkClientException,
                                                          Inspector2Exception
```
    Cancels the given findings report.
    
    This is a convenience which creates an instance of the CancelFindingsReportRequest.Builder avoiding the need to create one manually via CancelFindingsReportRequest.builder()
    
    Parameters:
    
    cancelFindingsReportRequest - A Consumer that will call methods on CancelFindingsReportRequest.Builder to create a request.
    
    Returns:
    
    Result of the CancelFindingsReport operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - cancelSbomExport
```
default CancelSbomExportResponse cancelSbomExport(CancelSbomExportRequest cancelSbomExportRequest)
                                           throws ValidationException,
                                                  AccessDeniedException,
                                                  ThrottlingException,
                                                  ResourceNotFoundException,
                                                  InternalServerException,
                                                  AwsServiceException,
                                                  SdkClientException,
                                                  Inspector2Exception
```
    Cancels a software bill of materials (SBOM) report.
    
    Parameters:
    
    cancelSbomExportRequest -
    
    Returns:
    
    Result of the CancelSbomExport operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - cancelSbomExport
```
default CancelSbomExportResponse cancelSbomExport(Consumer<CancelSbomExportRequest.Builder> cancelSbomExportRequest)
                                           throws ValidationException,
                                                  AccessDeniedException,
                                                  ThrottlingException,
                                                  ResourceNotFoundException,
                                                  InternalServerException,
                                                  AwsServiceException,
                                                  SdkClientException,
                                                  Inspector2Exception
```
    Cancels a software bill of materials (SBOM) report.
    
    This is a convenience which creates an instance of the CancelSbomExportRequest.Builder avoiding the need to create one manually via CancelSbomExportRequest.builder()
    
    Parameters:
    
    cancelSbomExportRequest - A Consumer that will call methods on CancelSbomExportRequest.Builder to create a request.
    
    Returns:
    
    Result of the CancelSbomExport operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createCisScanConfiguration
```
default CreateCisScanConfigurationResponse createCisScanConfiguration(CreateCisScanConfigurationRequest createCisScanConfigurationRequest)
                                                               throws ValidationException,
                                                                      AccessDeniedException,
                                                                      ThrottlingException,
                                                                      InternalServerException,
                                                                      AwsServiceException,
                                                                      SdkClientException,
                                                                      Inspector2Exception
```
    Creates a CIS scan configuration.
    
    Parameters:
    
    createCisScanConfigurationRequest -
    
    Returns:
    
    Result of the CreateCisScanConfiguration operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createCisScanConfiguration
```
default CreateCisScanConfigurationResponse createCisScanConfiguration(Consumer<CreateCisScanConfigurationRequest.Builder> createCisScanConfigurationRequest)
                                                               throws ValidationException,
                                                                      AccessDeniedException,
                                                                      ThrottlingException,
                                                                      InternalServerException,
                                                                      AwsServiceException,
                                                                      SdkClientException,
                                                                      Inspector2Exception
```
    Creates a CIS scan configuration.
    
    This is a convenience which creates an instance of the CreateCisScanConfigurationRequest.Builder avoiding the need to create one manually via CreateCisScanConfigurationRequest.builder()
    
    Parameters:
    
    createCisScanConfigurationRequest - A Consumer that will call methods on CreateCisScanConfigurationRequest.Builder to create a request.
    
    Returns:
    
    Result of the CreateCisScanConfiguration operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createFilter
```
default CreateFilterResponse createFilter(CreateFilterRequest createFilterRequest)
                                   throws ServiceQuotaExceededException,
                                          BadRequestException,
                                          ValidationException,
                                          AccessDeniedException,
                                          ThrottlingException,
                                          InternalServerException,
                                          AwsServiceException,
                                          SdkClientException,
                                          Inspector2Exception
```
    Creates a filter resource using specified filter criteria. When the filter action is set to SUPPRESS this action creates a suppression rule.
    
    Parameters:
    
    createFilterRequest -
    
    Returns:
    
    Result of the CreateFilter operation returned by the service.
    
    Throws:
    
    ServiceQuotaExceededException - You have exceeded your service quota. To perform the requested action, remove some of the relevant resources, or use Service Quotas to request a service quota increase.
    
    BadRequestException - One or more tags submitted as part of the request is not valid.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createFilter
```
default CreateFilterResponse createFilter(Consumer<CreateFilterRequest.Builder> createFilterRequest)
                                   throws ServiceQuotaExceededException,
                                          BadRequestException,
                                          ValidationException,
                                          AccessDeniedException,
                                          ThrottlingException,
                                          InternalServerException,
                                          AwsServiceException,
                                          SdkClientException,
                                          Inspector2Exception
```
    Creates a filter resource using specified filter criteria. When the filter action is set to SUPPRESS this action creates a suppression rule.
    
    This is a convenience which creates an instance of the CreateFilterRequest.Builder avoiding the need to create one manually via CreateFilterRequest.builder()
    
    Parameters:
    
    createFilterRequest - A Consumer that will call methods on CreateFilterRequest.Builder to create a request.
    
    Returns:
    
    Result of the CreateFilter operation returned by the service.
    
    Throws:
    
    ServiceQuotaExceededException - You have exceeded your service quota. To perform the requested action, remove some of the relevant resources, or use Service Quotas to request a service quota increase.
    
    BadRequestException - One or more tags submitted as part of the request is not valid.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createFindingsReport
```
default CreateFindingsReportResponse createFindingsReport(CreateFindingsReportRequest createFindingsReportRequest)
                                                   throws ValidationException,
                                                          AccessDeniedException,
                                                          ResourceNotFoundException,
                                                          ThrottlingException,
                                                          InternalServerException,
                                                          AwsServiceException,
                                                          SdkClientException,
                                                          Inspector2Exception
```
    Creates a finding report. By default only ACTIVE findings are returned in the report. To see SUPRESSED or CLOSED findings you must specify a value for the findingStatus filter criteria.
    
    Parameters:
    
    createFindingsReportRequest -
    
    Returns:
    
    Result of the CreateFindingsReport operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createFindingsReport
```
default CreateFindingsReportResponse createFindingsReport(Consumer<CreateFindingsReportRequest.Builder> createFindingsReportRequest)
                                                   throws ValidationException,
                                                          AccessDeniedException,
                                                          ResourceNotFoundException,
                                                          ThrottlingException,
                                                          InternalServerException,
                                                          AwsServiceException,
                                                          SdkClientException,
                                                          Inspector2Exception
```
    Creates a finding report. By default only ACTIVE findings are returned in the report. To see SUPRESSED or CLOSED findings you must specify a value for the findingStatus filter criteria.
    
    This is a convenience which creates an instance of the CreateFindingsReportRequest.Builder avoiding the need to create one manually via CreateFindingsReportRequest.builder()
    
    Parameters:
    
    createFindingsReportRequest - A Consumer that will call methods on CreateFindingsReportRequest.Builder to create a request.
    
    Returns:
    
    Result of the CreateFindingsReport operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createSbomExport
```
default CreateSbomExportResponse createSbomExport(CreateSbomExportRequest createSbomExportRequest)
                                           throws ValidationException,
                                                  AccessDeniedException,
                                                  ThrottlingException,
                                                  ResourceNotFoundException,
                                                  InternalServerException,
                                                  AwsServiceException,
                                                  SdkClientException,
                                                  Inspector2Exception
```
    Creates a software bill of materials (SBOM) report.
    
    Parameters:
    
    createSbomExportRequest -
    
    Returns:
    
    Result of the CreateSbomExport operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createSbomExport
```
default CreateSbomExportResponse createSbomExport(Consumer<CreateSbomExportRequest.Builder> createSbomExportRequest)
                                           throws ValidationException,
                                                  AccessDeniedException,
                                                  ThrottlingException,
                                                  ResourceNotFoundException,
                                                  InternalServerException,
                                                  AwsServiceException,
                                                  SdkClientException,
                                                  Inspector2Exception
```
    Creates a software bill of materials (SBOM) report.
    
    This is a convenience which creates an instance of the CreateSbomExportRequest.Builder avoiding the need to create one manually via CreateSbomExportRequest.builder()
    
    Parameters:
    
    createSbomExportRequest - A Consumer that will call methods on CreateSbomExportRequest.Builder to create a request.
    
    Returns:
    
    Result of the CreateSbomExport operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteCisScanConfiguration
```
default DeleteCisScanConfigurationResponse deleteCisScanConfiguration(DeleteCisScanConfigurationRequest deleteCisScanConfigurationRequest)
                                                               throws ValidationException,
                                                                      AccessDeniedException,
                                                                      ResourceNotFoundException,
                                                                      ThrottlingException,
                                                                      InternalServerException,
                                                                      AwsServiceException,
                                                                      SdkClientException,
                                                                      Inspector2Exception
```
    Deletes a CIS scan configuration.
    
    Parameters:
    
    deleteCisScanConfigurationRequest -
    
    Returns:
    
    Result of the DeleteCisScanConfiguration operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteCisScanConfiguration
```
default DeleteCisScanConfigurationResponse deleteCisScanConfiguration(Consumer<DeleteCisScanConfigurationRequest.Builder> deleteCisScanConfigurationRequest)
                                                               throws ValidationException,
                                                                      AccessDeniedException,
                                                                      ResourceNotFoundException,
                                                                      ThrottlingException,
                                                                      InternalServerException,
                                                                      AwsServiceException,
                                                                      SdkClientException,
                                                                      Inspector2Exception
```
    Deletes a CIS scan configuration.
    
    This is a convenience which creates an instance of the DeleteCisScanConfigurationRequest.Builder avoiding the need to create one manually via DeleteCisScanConfigurationRequest.builder()
    
    Parameters:
    
    deleteCisScanConfigurationRequest - A Consumer that will call methods on DeleteCisScanConfigurationRequest.Builder to create a request.
    
    Returns:
    
    Result of the DeleteCisScanConfiguration operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteFilter
```
default DeleteFilterResponse deleteFilter(DeleteFilterRequest deleteFilterRequest)
                                   throws ValidationException,
                                          AccessDeniedException,
                                          ResourceNotFoundException,
                                          ThrottlingException,
                                          InternalServerException,
                                          AwsServiceException,
                                          SdkClientException,
                                          Inspector2Exception
```
    Deletes a filter resource.
    
    Parameters:
    
    deleteFilterRequest -
    
    Returns:
    
    Result of the DeleteFilter operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteFilter
```
default DeleteFilterResponse deleteFilter(Consumer<DeleteFilterRequest.Builder> deleteFilterRequest)
                                   throws ValidationException,
                                          AccessDeniedException,
                                          ResourceNotFoundException,
                                          ThrottlingException,
                                          InternalServerException,
                                          AwsServiceException,
                                          SdkClientException,
                                          Inspector2Exception
```
    Deletes a filter resource.
    
    This is a convenience which creates an instance of the DeleteFilterRequest.Builder avoiding the need to create one manually via DeleteFilterRequest.builder()
    
    Parameters:
    
    deleteFilterRequest - A Consumer that will call methods on DeleteFilterRequest.Builder to create a request.
    
    Returns:
    
    Result of the DeleteFilter operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeOrganizationConfiguration
```
default DescribeOrganizationConfigurationResponse describeOrganizationConfiguration(DescribeOrganizationConfigurationRequest describeOrganizationConfigurationRequest)
                                                                             throws ValidationException,
                                                                                    AccessDeniedException,
                                                                                    ThrottlingException,
                                                                                    InternalServerException,
                                                                                    AwsServiceException,
                                                                                    SdkClientException,
                                                                                    Inspector2Exception
```
    Describe Amazon Inspector configuration settings for an Amazon Web Services organization.
    
    Parameters:
    
    describeOrganizationConfigurationRequest -
    
    Returns:
    
    Result of the DescribeOrganizationConfiguration operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeOrganizationConfiguration
```
default DescribeOrganizationConfigurationResponse describeOrganizationConfiguration(Consumer<DescribeOrganizationConfigurationRequest.Builder> describeOrganizationConfigurationRequest)
                                                                             throws ValidationException,
                                                                                    AccessDeniedException,
                                                                                    ThrottlingException,
                                                                                    InternalServerException,
                                                                                    AwsServiceException,
                                                                                    SdkClientException,
                                                                                    Inspector2Exception
```
    Describe Amazon Inspector configuration settings for an Amazon Web Services organization.
    
    This is a convenience which creates an instance of the DescribeOrganizationConfigurationRequest.Builder avoiding the need to create one manually via DescribeOrganizationConfigurationRequest.builder()
    
    Parameters:
    
    describeOrganizationConfigurationRequest - A Consumer that will call methods on DescribeOrganizationConfigurationRequest.Builder to create a request.
    
    Returns:
    
    Result of the DescribeOrganizationConfiguration operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - disable
```
default DisableResponse disable(DisableRequest disableRequest)
                         throws ValidationException,
                                AccessDeniedException,
                                ResourceNotFoundException,
                                ThrottlingException,
                                InternalServerException,
                                AwsServiceException,
                                SdkClientException,
                                Inspector2Exception
```
    Disables Amazon Inspector scans for one or more Amazon Web Services accounts. Disabling all scan types in an account disables the Amazon Inspector service.
    
    Parameters:
    
    disableRequest -
    
    Returns:
    
    Result of the Disable operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - disable
```
default DisableResponse disable(Consumer<DisableRequest.Builder> disableRequest)
                         throws ValidationException,
                                AccessDeniedException,
                                ResourceNotFoundException,
                                ThrottlingException,
                                InternalServerException,
                                AwsServiceException,
                                SdkClientException,
                                Inspector2Exception
```
    Disables Amazon Inspector scans for one or more Amazon Web Services accounts. Disabling all scan types in an account disables the Amazon Inspector service.
    
    This is a convenience which creates an instance of the DisableRequest.Builder avoiding the need to create one manually via DisableRequest.builder()
    
    Parameters:
    
    disableRequest - A Consumer that will call methods on DisableRequest.Builder to create a request.
    
    Returns:
    
    Result of the Disable operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - disableDelegatedAdminAccount
```
default DisableDelegatedAdminAccountResponse disableDelegatedAdminAccount(DisableDelegatedAdminAccountRequest disableDelegatedAdminAccountRequest)
                                                                   throws ConflictException,
                                                                          ValidationException,
                                                                          AccessDeniedException,
                                                                          ResourceNotFoundException,
                                                                          ThrottlingException,
                                                                          InternalServerException,
                                                                          AwsServiceException,
                                                                          SdkClientException,
                                                                          Inspector2Exception
```
    Disables the Amazon Inspector delegated administrator for your organization.
    
    Parameters:
    
    disableDelegatedAdminAccountRequest -
    
    Returns:
    
    Result of the DisableDelegatedAdminAccount operation returned by the service.
    
    Throws:
    
    ConflictException - A conflict occurred.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - disableDelegatedAdminAccount
```
default DisableDelegatedAdminAccountResponse disableDelegatedAdminAccount(Consumer<DisableDelegatedAdminAccountRequest.Builder> disableDelegatedAdminAccountRequest)
                                                                   throws ConflictException,
                                                                          ValidationException,
                                                                          AccessDeniedException,
                                                                          ResourceNotFoundException,
                                                                          ThrottlingException,
                                                                          InternalServerException,
                                                                          AwsServiceException,
                                                                          SdkClientException,
                                                                          Inspector2Exception
```
    Disables the Amazon Inspector delegated administrator for your organization.
    
    This is a convenience which creates an instance of the DisableDelegatedAdminAccountRequest.Builder avoiding the need to create one manually via DisableDelegatedAdminAccountRequest.builder()
    
    Parameters:
    
    disableDelegatedAdminAccountRequest - A Consumer that will call methods on DisableDelegatedAdminAccountRequest.Builder to create a request.
    
    Returns:
    
    Result of the DisableDelegatedAdminAccount operation returned by the service.
    
    Throws:
    
    ConflictException - A conflict occurred.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - disassociateMember
```
default DisassociateMemberResponse disassociateMember(DisassociateMemberRequest disassociateMemberRequest)
                                               throws ValidationException,
                                                      AccessDeniedException,
                                                      ThrottlingException,
                                                      InternalServerException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      Inspector2Exception
```
    Disassociates a member account from an Amazon Inspector delegated administrator.
    
    Parameters:
    
    disassociateMemberRequest -
    
    Returns:
    
    Result of the DisassociateMember operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - disassociateMember
```
default DisassociateMemberResponse disassociateMember(Consumer<DisassociateMemberRequest.Builder> disassociateMemberRequest)
                                               throws ValidationException,
                                                      AccessDeniedException,
                                                      ThrottlingException,
                                                      InternalServerException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      Inspector2Exception
```
    Disassociates a member account from an Amazon Inspector delegated administrator.
    
    This is a convenience which creates an instance of the DisassociateMemberRequest.Builder avoiding the need to create one manually via DisassociateMemberRequest.builder()
    
    Parameters:
    
    disassociateMemberRequest - A Consumer that will call methods on DisassociateMemberRequest.Builder to create a request.
    
    Returns:
    
    Result of the DisassociateMember operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - enable
```
default EnableResponse enable(EnableRequest enableRequest)
                       throws ValidationException,
                              AccessDeniedException,
                              ResourceNotFoundException,
                              ThrottlingException,
                              InternalServerException,
                              AwsServiceException,
                              SdkClientException,
                              Inspector2Exception
```
    Enables Amazon Inspector scans for one or more Amazon Web Services accounts.
    
    Parameters:
    
    enableRequest -
    
    Returns:
    
    Result of the Enable operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - enable
```
default EnableResponse enable(Consumer<EnableRequest.Builder> enableRequest)
                       throws ValidationException,
                              AccessDeniedException,
                              ResourceNotFoundException,
                              ThrottlingException,
                              InternalServerException,
                              AwsServiceException,
                              SdkClientException,
                              Inspector2Exception
```
    Enables Amazon Inspector scans for one or more Amazon Web Services accounts.
    
    This is a convenience which creates an instance of the EnableRequest.Builder avoiding the need to create one manually via EnableRequest.builder()
    
    Parameters:
    
    enableRequest - A Consumer that will call methods on EnableRequest.Builder to create a request.
    
    Returns:
    
    Result of the Enable operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - enableDelegatedAdminAccount
```
default EnableDelegatedAdminAccountResponse enableDelegatedAdminAccount(EnableDelegatedAdminAccountRequest enableDelegatedAdminAccountRequest)
                                                                 throws ConflictException,
                                                                        ValidationException,
                                                                        AccessDeniedException,
                                                                        ResourceNotFoundException,
                                                                        ThrottlingException,
                                                                        InternalServerException,
                                                                        AwsServiceException,
                                                                        SdkClientException,
                                                                        Inspector2Exception
```
    Enables the Amazon Inspector delegated administrator for your Organizations organization.
    
    Parameters:
    
    enableDelegatedAdminAccountRequest -
    
    Returns:
    
    Result of the EnableDelegatedAdminAccount operation returned by the service.
    
    Throws:
    
    ConflictException - A conflict occurred.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - enableDelegatedAdminAccount
```
default EnableDelegatedAdminAccountResponse enableDelegatedAdminAccount(Consumer<EnableDelegatedAdminAccountRequest.Builder> enableDelegatedAdminAccountRequest)
                                                                 throws ConflictException,
                                                                        ValidationException,
                                                                        AccessDeniedException,
                                                                        ResourceNotFoundException,
                                                                        ThrottlingException,
                                                                        InternalServerException,
                                                                        AwsServiceException,
                                                                        SdkClientException,
                                                                        Inspector2Exception
```
    Enables the Amazon Inspector delegated administrator for your Organizations organization.
    
    This is a convenience which creates an instance of the EnableDelegatedAdminAccountRequest.Builder avoiding the need to create one manually via EnableDelegatedAdminAccountRequest.builder()
    
    Parameters:
    
    enableDelegatedAdminAccountRequest - A Consumer that will call methods on EnableDelegatedAdminAccountRequest.Builder to create a request.
    
    Returns:
    
    Result of the EnableDelegatedAdminAccount operation returned by the service.
    
    Throws:
    
    ConflictException - A conflict occurred.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getCisScanReport
```
default GetCisScanReportResponse getCisScanReport(GetCisScanReportRequest getCisScanReportRequest)
                                           throws ValidationException,
                                                  AccessDeniedException,
                                                  ThrottlingException,
                                                  ResourceNotFoundException,
                                                  InternalServerException,
                                                  AwsServiceException,
                                                  SdkClientException,
                                                  Inspector2Exception
```
    Retrieves a CIS scan report.
    
    Parameters:
    
    getCisScanReportRequest -
    
    Returns:
    
    Result of the GetCisScanReport operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getCisScanReport
```
default GetCisScanReportResponse getCisScanReport(Consumer<GetCisScanReportRequest.Builder> getCisScanReportRequest)
                                           throws ValidationException,
                                                  AccessDeniedException,
                                                  ThrottlingException,
                                                  ResourceNotFoundException,
                                                  InternalServerException,
                                                  AwsServiceException,
                                                  SdkClientException,
                                                  Inspector2Exception
```
    Retrieves a CIS scan report.
    
    This is a convenience which creates an instance of the GetCisScanReportRequest.Builder avoiding the need to create one manually via GetCisScanReportRequest.builder()
    
    Parameters:
    
    getCisScanReportRequest - A Consumer that will call methods on GetCisScanReportRequest.Builder to create a request.
    
    Returns:
    
    Result of the GetCisScanReport operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getCisScanResultDetails
```
default GetCisScanResultDetailsResponse getCisScanResultDetails(GetCisScanResultDetailsRequest getCisScanResultDetailsRequest)
                                                         throws AccessDeniedException,
                                                                ValidationException,
                                                                ThrottlingException,
                                                                InternalServerException,
                                                                AwsServiceException,
                                                                SdkClientException,
                                                                Inspector2Exception
```
    Retrieves CIS scan result details.
    
    Parameters:
    
    getCisScanResultDetailsRequest -
    
    Returns:
    
    Result of the GetCisScanResultDetails operation returned by the service.
    
    Throws:
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getCisScanResultDetails
```
default GetCisScanResultDetailsResponse getCisScanResultDetails(Consumer<GetCisScanResultDetailsRequest.Builder> getCisScanResultDetailsRequest)
                                                         throws AccessDeniedException,
                                                                ValidationException,
                                                                ThrottlingException,
                                                                InternalServerException,
                                                                AwsServiceException,
                                                                SdkClientException,
                                                                Inspector2Exception
```
    Retrieves CIS scan result details.
    
    This is a convenience which creates an instance of the GetCisScanResultDetailsRequest.Builder avoiding the need to create one manually via GetCisScanResultDetailsRequest.builder()
    
    Parameters:
    
    getCisScanResultDetailsRequest - A Consumer that will call methods on GetCisScanResultDetailsRequest.Builder to create a request.
    
    Returns:
    
    Result of the GetCisScanResultDetails operation returned by the service.
    
    Throws:
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getCisScanResultDetailsPaginator
```
default GetCisScanResultDetailsIterable getCisScanResultDetailsPaginator(GetCisScanResultDetailsRequest getCisScanResultDetailsRequest)
                                                                  throws AccessDeniedException,
                                                                         ValidationException,
                                                                         ThrottlingException,
                                                                         InternalServerException,
                                                                         AwsServiceException,
                                                                         SdkClientException,
                                                                         Inspector2Exception
```
    This is a variant of getCisScanResultDetails(software.amazon.awssdk.services.inspector2.model.GetCisScanResultDetailsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.inspector2.paginators.GetCisScanResultDetailsIterable responses = client.getCisScanResultDetailsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.inspector2.paginators.GetCisScanResultDetailsIterable responses = client .getCisScanResultDetailsPaginator(request); for (software.amazon.awssdk.services.inspector2.model.GetCisScanResultDetailsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.inspector2.paginators.GetCisScanResultDetailsIterable responses = client.getCisScanResultDetailsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the getCisScanResultDetails(software.amazon.awssdk.services.inspector2.model.GetCisScanResultDetailsRequest) operation.
    Parameters:
    
    getCisScanResultDetailsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getCisScanResultDetailsPaginator
```
default GetCisScanResultDetailsIterable getCisScanResultDetailsPaginator(Consumer<GetCisScanResultDetailsRequest.Builder> getCisScanResultDetailsRequest)
                                                                  throws AccessDeniedException,
                                                                         ValidationException,
                                                                         ThrottlingException,
                                                                         InternalServerException,
                                                                         AwsServiceException,
                                                                         SdkClientException,
                                                                         Inspector2Exception
```
    This is a variant of getCisScanResultDetails(software.amazon.awssdk.services.inspector2.model.GetCisScanResultDetailsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.inspector2.paginators.GetCisScanResultDetailsIterable responses = client.getCisScanResultDetailsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.inspector2.paginators.GetCisScanResultDetailsIterable responses = client .getCisScanResultDetailsPaginator(request); for (software.amazon.awssdk.services.inspector2.model.GetCisScanResultDetailsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.inspector2.paginators.GetCisScanResultDetailsIterable responses = client.getCisScanResultDetailsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the getCisScanResultDetails(software.amazon.awssdk.services.inspector2.model.GetCisScanResultDetailsRequest) operation.
    
    This is a convenience which creates an instance of the GetCisScanResultDetailsRequest.Builder avoiding the need to create one manually via GetCisScanResultDetailsRequest.builder()
    Parameters:
    
    getCisScanResultDetailsRequest - A Consumer that will call methods on GetCisScanResultDetailsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getConfiguration
```
default GetConfigurationResponse getConfiguration(GetConfigurationRequest getConfigurationRequest)
                                           throws ResourceNotFoundException,
                                                  ThrottlingException,
                                                  InternalServerException,
                                                  AwsServiceException,
                                                  SdkClientException,
                                                  Inspector2Exception
```
    Retrieves setting configurations for Inspector scans.
    
    Parameters:
    
    getConfigurationRequest -
    
    Returns:
    
    Result of the GetConfiguration operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getConfiguration
```
default GetConfigurationResponse getConfiguration(Consumer<GetConfigurationRequest.Builder> getConfigurationRequest)
                                           throws ResourceNotFoundException,
                                                  ThrottlingException,
                                                  InternalServerException,
                                                  AwsServiceException,
                                                  SdkClientException,
                                                  Inspector2Exception
```
    Retrieves setting configurations for Inspector scans.
    
    This is a convenience which creates an instance of the GetConfigurationRequest.Builder avoiding the need to create one manually via GetConfigurationRequest.builder()
    
    Parameters:
    
    getConfigurationRequest - A Consumer that will call methods on GetConfigurationRequest.Builder to create a request.
    
    Returns:
    
    Result of the GetConfiguration operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getDelegatedAdminAccount
```
default GetDelegatedAdminAccountResponse getDelegatedAdminAccount(GetDelegatedAdminAccountRequest getDelegatedAdminAccountRequest)
                                                           throws AccessDeniedException,
                                                                  ValidationException,
                                                                  ResourceNotFoundException,
                                                                  ThrottlingException,
                                                                  InternalServerException,
                                                                  AwsServiceException,
                                                                  SdkClientException,
                                                                  Inspector2Exception
```
    Retrieves information about the Amazon Inspector delegated administrator for your organization.
    
    Parameters:
    
    getDelegatedAdminAccountRequest -
    
    Returns:
    
    Result of the GetDelegatedAdminAccount operation returned by the service.
    
    Throws:
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getDelegatedAdminAccount
```
default GetDelegatedAdminAccountResponse getDelegatedAdminAccount(Consumer<GetDelegatedAdminAccountRequest.Builder> getDelegatedAdminAccountRequest)
                                                           throws AccessDeniedException,
                                                                  ValidationException,
                                                                  ResourceNotFoundException,
                                                                  ThrottlingException,
                                                                  InternalServerException,
                                                                  AwsServiceException,
                                                                  SdkClientException,
                                                                  Inspector2Exception
```
    Retrieves information about the Amazon Inspector delegated administrator for your organization.
    
    This is a convenience which creates an instance of the GetDelegatedAdminAccountRequest.Builder avoiding the need to create one manually via GetDelegatedAdminAccountRequest.builder()
    
    Parameters:
    
    getDelegatedAdminAccountRequest - A Consumer that will call methods on GetDelegatedAdminAccountRequest.Builder to create a request.
    
    Returns:
    
    Result of the GetDelegatedAdminAccount operation returned by the service.
    
    Throws:
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getEc2DeepInspectionConfiguration
```
default GetEc2DeepInspectionConfigurationResponse getEc2DeepInspectionConfiguration(GetEc2DeepInspectionConfigurationRequest getEc2DeepInspectionConfigurationRequest)
                                                                             throws AccessDeniedException,
                                                                                    ResourceNotFoundException,
                                                                                    ThrottlingException,
                                                                                    InternalServerException,
                                                                                    AwsServiceException,
                                                                                    SdkClientException,
                                                                                    Inspector2Exception
```
    Retrieves the activation status of Amazon Inspector deep inspection and custom paths associated with your account.
    
    Parameters:
    
    getEc2DeepInspectionConfigurationRequest -
    
    Returns:
    
    Result of the GetEc2DeepInspectionConfiguration operation returned by the service.
    
    Throws:
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getEc2DeepInspectionConfiguration
```
default GetEc2DeepInspectionConfigurationResponse getEc2DeepInspectionConfiguration(Consumer<GetEc2DeepInspectionConfigurationRequest.Builder> getEc2DeepInspectionConfigurationRequest)
                                                                             throws AccessDeniedException,
                                                                                    ResourceNotFoundException,
                                                                                    ThrottlingException,
                                                                                    InternalServerException,
                                                                                    AwsServiceException,
                                                                                    SdkClientException,
                                                                                    Inspector2Exception
```
    Retrieves the activation status of Amazon Inspector deep inspection and custom paths associated with your account.
    
    This is a convenience which creates an instance of the GetEc2DeepInspectionConfigurationRequest.Builder avoiding the need to create one manually via GetEc2DeepInspectionConfigurationRequest.builder()
    
    Parameters:
    
    getEc2DeepInspectionConfigurationRequest - A Consumer that will call methods on GetEc2DeepInspectionConfigurationRequest.Builder to create a request.
    
    Returns:
    
    Result of the GetEc2DeepInspectionConfiguration operation returned by the service.
    
    Throws:
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getEncryptionKey
```
default GetEncryptionKeyResponse getEncryptionKey(GetEncryptionKeyRequest getEncryptionKeyRequest)
                                           throws ValidationException,
                                                  AccessDeniedException,
                                                  ThrottlingException,
                                                  ResourceNotFoundException,
                                                  InternalServerException,
                                                  AwsServiceException,
                                                  SdkClientException,
                                                  Inspector2Exception
```
    Gets an encryption key.
    
    Parameters:
    
    getEncryptionKeyRequest -
    
    Returns:
    
    Result of the GetEncryptionKey operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getEncryptionKey
```
default GetEncryptionKeyResponse getEncryptionKey(Consumer<GetEncryptionKeyRequest.Builder> getEncryptionKeyRequest)
                                           throws ValidationException,
                                                  AccessDeniedException,
                                                  ThrottlingException,
                                                  ResourceNotFoundException,
                                                  InternalServerException,
                                                  AwsServiceException,
                                                  SdkClientException,
                                                  Inspector2Exception
```
    Gets an encryption key.
    
    This is a convenience which creates an instance of the GetEncryptionKeyRequest.Builder avoiding the need to create one manually via GetEncryptionKeyRequest.builder()
    
    Parameters:
    
    getEncryptionKeyRequest - A Consumer that will call methods on GetEncryptionKeyRequest.Builder to create a request.
    
    Returns:
    
    Result of the GetEncryptionKey operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getFindingsReportStatus
```
default GetFindingsReportStatusResponse getFindingsReportStatus(GetFindingsReportStatusRequest getFindingsReportStatusRequest)
                                                         throws ValidationException,
                                                                AccessDeniedException,
                                                                ResourceNotFoundException,
                                                                ThrottlingException,
                                                                InternalServerException,
                                                                AwsServiceException,
                                                                SdkClientException,
                                                                Inspector2Exception
```
    Gets the status of a findings report.
    
    Parameters:
    
    getFindingsReportStatusRequest -
    
    Returns:
    
    Result of the GetFindingsReportStatus operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getFindingsReportStatus
```
default GetFindingsReportStatusResponse getFindingsReportStatus(Consumer<GetFindingsReportStatusRequest.Builder> getFindingsReportStatusRequest)
                                                         throws ValidationException,
                                                                AccessDeniedException,
                                                                ResourceNotFoundException,
                                                                ThrottlingException,
                                                                InternalServerException,
                                                                AwsServiceException,
                                                                SdkClientException,
                                                                Inspector2Exception
```
    Gets the status of a findings report.
    
    This is a convenience which creates an instance of the GetFindingsReportStatusRequest.Builder avoiding the need to create one manually via GetFindingsReportStatusRequest.builder()
    
    Parameters:
    
    getFindingsReportStatusRequest - A Consumer that will call methods on GetFindingsReportStatusRequest.Builder to create a request.
    
    Returns:
    
    Result of the GetFindingsReportStatus operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getMember
```
default GetMemberResponse getMember(GetMemberRequest getMemberRequest)
                             throws ValidationException,
                                    AccessDeniedException,
                                    ResourceNotFoundException,
                                    ThrottlingException,
                                    InternalServerException,
                                    AwsServiceException,
                                    SdkClientException,
                                    Inspector2Exception
```
    Gets member information for your organization.
    
    Parameters:
    
    getMemberRequest -
    
    Returns:
    
    Result of the GetMember operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getMember
```
default GetMemberResponse getMember(Consumer<GetMemberRequest.Builder> getMemberRequest)
                             throws ValidationException,
                                    AccessDeniedException,
                                    ResourceNotFoundException,
                                    ThrottlingException,
                                    InternalServerException,
                                    AwsServiceException,
                                    SdkClientException,
                                    Inspector2Exception
```
    Gets member information for your organization.
    
    This is a convenience which creates an instance of the GetMemberRequest.Builder avoiding the need to create one manually via GetMemberRequest.builder()
    
    Parameters:
    
    getMemberRequest - A Consumer that will call methods on GetMemberRequest.Builder to create a request.
    
    Returns:
    
    Result of the GetMember operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getSbomExport
```
default GetSbomExportResponse getSbomExport(GetSbomExportRequest getSbomExportRequest)
                                     throws ValidationException,
                                            AccessDeniedException,
                                            ResourceNotFoundException,
                                            ThrottlingException,
                                            InternalServerException,
                                            AwsServiceException,
                                            SdkClientException,
                                            Inspector2Exception
```
    Gets details of a software bill of materials (SBOM) report.
    
    Parameters:
    
    getSbomExportRequest -
    
    Returns:
    
    Result of the GetSbomExport operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getSbomExport
```
default GetSbomExportResponse getSbomExport(Consumer<GetSbomExportRequest.Builder> getSbomExportRequest)
                                     throws ValidationException,
                                            AccessDeniedException,
                                            ResourceNotFoundException,
                                            ThrottlingException,
                                            InternalServerException,
                                            AwsServiceException,
                                            SdkClientException,
                                            Inspector2Exception
```
    Gets details of a software bill of materials (SBOM) report.
    
    This is a convenience which creates an instance of the GetSbomExportRequest.Builder avoiding the need to create one manually via GetSbomExportRequest.builder()
    
    Parameters:
    
    getSbomExportRequest - A Consumer that will call methods on GetSbomExportRequest.Builder to create a request.
    
    Returns:
    
    Result of the GetSbomExport operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAccountPermissions
```
default ListAccountPermissionsResponse listAccountPermissions(ListAccountPermissionsRequest listAccountPermissionsRequest)
                                                       throws ValidationException,
                                                              AccessDeniedException,
                                                              ThrottlingException,
                                                              InternalServerException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              Inspector2Exception
```
    Lists the permissions an account has to configure Amazon Inspector.
    
    Parameters:
    
    listAccountPermissionsRequest -
    
    Returns:
    
    Result of the ListAccountPermissions operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAccountPermissions
```
default ListAccountPermissionsResponse listAccountPermissions(Consumer<ListAccountPermissionsRequest.Builder> listAccountPermissionsRequest)
                                                       throws ValidationException,
                                                              AccessDeniedException,
                                                              ThrottlingException,
                                                              InternalServerException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              Inspector2Exception
```
    Lists the permissions an account has to configure Amazon Inspector.
    
    This is a convenience which creates an instance of the ListAccountPermissionsRequest.Builder avoiding the need to create one manually via ListAccountPermissionsRequest.builder()
    
    Parameters:
    
    listAccountPermissionsRequest - A Consumer that will call methods on ListAccountPermissionsRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListAccountPermissions operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAccountPermissionsPaginator
```
default ListAccountPermissionsIterable listAccountPermissionsPaginator(ListAccountPermissionsRequest listAccountPermissionsRequest)
                                                                throws ValidationException,
                                                                       AccessDeniedException,
                                                                       ThrottlingException,
                                                                       InternalServerException,
                                                                       AwsServiceException,
                                                                       SdkClientException,
                                                                       Inspector2Exception
```
    This is a variant of listAccountPermissions(software.amazon.awssdk.services.inspector2.model.ListAccountPermissionsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.inspector2.paginators.ListAccountPermissionsIterable responses = client.listAccountPermissionsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.inspector2.paginators.ListAccountPermissionsIterable responses = client .listAccountPermissionsPaginator(request); for (software.amazon.awssdk.services.inspector2.model.ListAccountPermissionsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.inspector2.paginators.ListAccountPermissionsIterable responses = client.listAccountPermissionsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listAccountPermissions(software.amazon.awssdk.services.inspector2.model.ListAccountPermissionsRequest) operation.
    Parameters:
    
    listAccountPermissionsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAccountPermissionsPaginator
```
default ListAccountPermissionsIterable listAccountPermissionsPaginator(Consumer<ListAccountPermissionsRequest.Builder> listAccountPermissionsRequest)
                                                                throws ValidationException,
                                                                       AccessDeniedException,
                                                                       ThrottlingException,
                                                                       InternalServerException,
                                                                       AwsServiceException,
                                                                       SdkClientException,
                                                                       Inspector2Exception
```
    This is a variant of listAccountPermissions(software.amazon.awssdk.services.inspector2.model.ListAccountPermissionsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.inspector2.paginators.ListAccountPermissionsIterable responses = client.listAccountPermissionsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.inspector2.paginators.ListAccountPermissionsIterable responses = client .listAccountPermissionsPaginator(request); for (software.amazon.awssdk.services.inspector2.model.ListAccountPermissionsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.inspector2.paginators.ListAccountPermissionsIterable responses = client.listAccountPermissionsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listAccountPermissions(software.amazon.awssdk.services.inspector2.model.ListAccountPermissionsRequest) operation.
    
    This is a convenience which creates an instance of the ListAccountPermissionsRequest.Builder avoiding the need to create one manually via ListAccountPermissionsRequest.builder()
    Parameters:
    
    listAccountPermissionsRequest - A Consumer that will call methods on ListAccountPermissionsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listCisScanConfigurations
```
default ListCisScanConfigurationsResponse listCisScanConfigurations(ListCisScanConfigurationsRequest listCisScanConfigurationsRequest)
                                                             throws AccessDeniedException,
                                                                    ValidationException,
                                                                    ThrottlingException,
                                                                    InternalServerException,
                                                                    AwsServiceException,
                                                                    SdkClientException,
                                                                    Inspector2Exception
```
    Lists CIS scan configurations.
    
    Parameters:
    
    listCisScanConfigurationsRequest -
    
    Returns:
    
    Result of the ListCisScanConfigurations operation returned by the service.
    
    Throws:
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listCisScanConfigurations
```
default ListCisScanConfigurationsResponse listCisScanConfigurations(Consumer<ListCisScanConfigurationsRequest.Builder> listCisScanConfigurationsRequest)
                                                             throws AccessDeniedException,
                                                                    ValidationException,
                                                                    ThrottlingException,
                                                                    InternalServerException,
                                                                    AwsServiceException,
                                                                    SdkClientException,
                                                                    Inspector2Exception
```
    Lists CIS scan configurations.
    
    This is a convenience which creates an instance of the ListCisScanConfigurationsRequest.Builder avoiding the need to create one manually via ListCisScanConfigurationsRequest.builder()
    
    Parameters:
    
    listCisScanConfigurationsRequest - A Consumer that will call methods on ListCisScanConfigurationsRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListCisScanConfigurations operation returned by the service.
    
    Throws:
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listCisScanConfigurationsPaginator
```
default ListCisScanConfigurationsIterable listCisScanConfigurationsPaginator(ListCisScanConfigurationsRequest listCisScanConfigurationsRequest)
                                                                      throws AccessDeniedException,
                                                                             ValidationException,
                                                                             ThrottlingException,
                                                                             InternalServerException,
                                                                             AwsServiceException,
                                                                             SdkClientException,
                                                                             Inspector2Exception
```
    This is a variant of listCisScanConfigurations(software.amazon.awssdk.services.inspector2.model.ListCisScanConfigurationsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.inspector2.paginators.ListCisScanConfigurationsIterable responses = client.listCisScanConfigurationsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.inspector2.paginators.ListCisScanConfigurationsIterable responses = client .listCisScanConfigurationsPaginator(request); for (software.amazon.awssdk.services.inspector2.model.ListCisScanConfigurationsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.inspector2.paginators.ListCisScanConfigurationsIterable responses = client.listCisScanConfigurationsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listCisScanConfigurations(software.amazon.awssdk.services.inspector2.model.ListCisScanConfigurationsRequest) operation.
    Parameters:
    
    listCisScanConfigurationsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listCisScanConfigurationsPaginator
```
default ListCisScanConfigurationsIterable listCisScanConfigurationsPaginator(Consumer<ListCisScanConfigurationsRequest.Builder> listCisScanConfigurationsRequest)
                                                                      throws AccessDeniedException,
                                                                             ValidationException,
                                                                             ThrottlingException,
                                                                             InternalServerException,
                                                                             AwsServiceException,
                                                                             SdkClientException,
                                                                             Inspector2Exception
```
    This is a variant of listCisScanConfigurations(software.amazon.awssdk.services.inspector2.model.ListCisScanConfigurationsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.inspector2.paginators.ListCisScanConfigurationsIterable responses = client.listCisScanConfigurationsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.inspector2.paginators.ListCisScanConfigurationsIterable responses = client .listCisScanConfigurationsPaginator(request); for (software.amazon.awssdk.services.inspector2.model.ListCisScanConfigurationsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.inspector2.paginators.ListCisScanConfigurationsIterable responses = client.listCisScanConfigurationsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listCisScanConfigurations(software.amazon.awssdk.services.inspector2.model.ListCisScanConfigurationsRequest) operation.
    
    This is a convenience which creates an instance of the ListCisScanConfigurationsRequest.Builder avoiding the need to create one manually via ListCisScanConfigurationsRequest.builder()
    Parameters:
    
    listCisScanConfigurationsRequest - A Consumer that will call methods on ListCisScanConfigurationsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listCisScanResultsAggregatedByChecks
```
default ListCisScanResultsAggregatedByChecksResponse listCisScanResultsAggregatedByChecks(ListCisScanResultsAggregatedByChecksRequest listCisScanResultsAggregatedByChecksRequest)
                                                                                   throws AccessDeniedException,
                                                                                          ValidationException,
                                                                                          ThrottlingException,
                                                                                          InternalServerException,
                                                                                          AwsServiceException,
                                                                                          SdkClientException,
                                                                                          Inspector2Exception
```
    Lists scan results aggregated by checks.
    
    Parameters:
    
    listCisScanResultsAggregatedByChecksRequest -
    
    Returns:
    
    Result of the ListCisScanResultsAggregatedByChecks operation returned by the service.
    
    Throws:
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listCisScanResultsAggregatedByChecks
```
default ListCisScanResultsAggregatedByChecksResponse listCisScanResultsAggregatedByChecks(Consumer<ListCisScanResultsAggregatedByChecksRequest.Builder> listCisScanResultsAggregatedByChecksRequest)
                                                                                   throws AccessDeniedException,
                                                                                          ValidationException,
                                                                                          ThrottlingException,
                                                                                          InternalServerException,
                                                                                          AwsServiceException,
                                                                                          SdkClientException,
                                                                                          Inspector2Exception
```
    Lists scan results aggregated by checks.
    
    This is a convenience which creates an instance of the ListCisScanResultsAggregatedByChecksRequest.Builder avoiding the need to create one manually via ListCisScanResultsAggregatedByChecksRequest.builder()
    
    Parameters:
    
    listCisScanResultsAggregatedByChecksRequest - A Consumer that will call methods on ListCisScanResultsAggregatedByChecksRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListCisScanResultsAggregatedByChecks operation returned by the service.
    
    Throws:
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listCisScanResultsAggregatedByChecksPaginator
```
default ListCisScanResultsAggregatedByChecksIterable listCisScanResultsAggregatedByChecksPaginator(ListCisScanResultsAggregatedByChecksRequest listCisScanResultsAggregatedByChecksRequest)
                                                                                            throws AccessDeniedException,
                                                                                                   ValidationException,
                                                                                                   ThrottlingException,
                                                                                                   InternalServerException,
                                                                                                   AwsServiceException,
                                                                                                   SdkClientException,
                                                                                                   Inspector2Exception
```
    This is a variant of listCisScanResultsAggregatedByChecks(software.amazon.awssdk.services.inspector2.model.ListCisScanResultsAggregatedByChecksRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.inspector2.paginators.ListCisScanResultsAggregatedByChecksIterable responses = client.listCisScanResultsAggregatedByChecksPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.inspector2.paginators.ListCisScanResultsAggregatedByChecksIterable responses = client .listCisScanResultsAggregatedByChecksPaginator(request); for (software.amazon.awssdk.services.inspector2.model.ListCisScanResultsAggregatedByChecksResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.inspector2.paginators.ListCisScanResultsAggregatedByChecksIterable responses = client.listCisScanResultsAggregatedByChecksPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listCisScanResultsAggregatedByChecks(software.amazon.awssdk.services.inspector2.model.ListCisScanResultsAggregatedByChecksRequest) operation.
    Parameters:
    
    listCisScanResultsAggregatedByChecksRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listCisScanResultsAggregatedByChecksPaginator
```
default ListCisScanResultsAggregatedByChecksIterable listCisScanResultsAggregatedByChecksPaginator(Consumer<ListCisScanResultsAggregatedByChecksRequest.Builder> listCisScanResultsAggregatedByChecksRequest)
                                                                                            throws AccessDeniedException,
                                                                                                   ValidationException,
                                                                                                   ThrottlingException,
                                                                                                   InternalServerException,
                                                                                                   AwsServiceException,
                                                                                                   SdkClientException,
                                                                                                   Inspector2Exception
```
    This is a variant of listCisScanResultsAggregatedByChecks(software.amazon.awssdk.services.inspector2.model.ListCisScanResultsAggregatedByChecksRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.inspector2.paginators.ListCisScanResultsAggregatedByChecksIterable responses = client.listCisScanResultsAggregatedByChecksPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.inspector2.paginators.ListCisScanResultsAggregatedByChecksIterable responses = client .listCisScanResultsAggregatedByChecksPaginator(request); for (software.amazon.awssdk.services.inspector2.model.ListCisScanResultsAggregatedByChecksResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.inspector2.paginators.ListCisScanResultsAggregatedByChecksIterable responses = client.listCisScanResultsAggregatedByChecksPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listCisScanResultsAggregatedByChecks(software.amazon.awssdk.services.inspector2.model.ListCisScanResultsAggregatedByChecksRequest) operation.
    
    This is a convenience which creates an instance of the ListCisScanResultsAggregatedByChecksRequest.Builder avoiding the need to create one manually via ListCisScanResultsAggregatedByChecksRequest.builder()
    Parameters:
    
    listCisScanResultsAggregatedByChecksRequest - A Consumer that will call methods on ListCisScanResultsAggregatedByChecksRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listCisScanResultsAggregatedByTargetResource
```
default ListCisScanResultsAggregatedByTargetResourceResponse listCisScanResultsAggregatedByTargetResource(ListCisScanResultsAggregatedByTargetResourceRequest listCisScanResultsAggregatedByTargetResourceRequest)
                                                                                                   throws AccessDeniedException,
                                                                                                          ValidationException,
                                                                                                          ThrottlingException,
                                                                                                          InternalServerException,
                                                                                                          AwsServiceException,
                                                                                                          SdkClientException,
                                                                                                          Inspector2Exception
```
    Lists scan results aggregated by a target resource.
    
    Parameters:
    
    listCisScanResultsAggregatedByTargetResourceRequest -
    
    Returns:
    
    Result of the ListCisScanResultsAggregatedByTargetResource operation returned by the service.
    
    Throws:
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listCisScanResultsAggregatedByTargetResource
```
default ListCisScanResultsAggregatedByTargetResourceResponse listCisScanResultsAggregatedByTargetResource(Consumer<ListCisScanResultsAggregatedByTargetResourceRequest.Builder> listCisScanResultsAggregatedByTargetResourceRequest)
                                                                                                   throws AccessDeniedException,
                                                                                                          ValidationException,
                                                                                                          ThrottlingException,
                                                                                                          InternalServerException,
                                                                                                          AwsServiceException,
                                                                                                          SdkClientException,
                                                                                                          Inspector2Exception
```
    Lists scan results aggregated by a target resource.
    
    This is a convenience which creates an instance of the ListCisScanResultsAggregatedByTargetResourceRequest.Builder avoiding the need to create one manually via ListCisScanResultsAggregatedByTargetResourceRequest.builder()
    
    Parameters:
    
    listCisScanResultsAggregatedByTargetResourceRequest - A Consumer that will call methods on ListCisScanResultsAggregatedByTargetResourceRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListCisScanResultsAggregatedByTargetResource operation returned by the service.
    
    Throws:
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listCisScanResultsAggregatedByTargetResourcePaginator
```
default ListCisScanResultsAggregatedByTargetResourceIterable listCisScanResultsAggregatedByTargetResourcePaginator(ListCisScanResultsAggregatedByTargetResourceRequest listCisScanResultsAggregatedByTargetResourceRequest)
                                                                                                            throws AccessDeniedException,
                                                                                                                   ValidationException,
                                                                                                                   ThrottlingException,
                                                                                                                   InternalServerException,
                                                                                                                   AwsServiceException,
                                                                                                                   SdkClientException,
                                                                                                                   Inspector2Exception
```
    This is a variant of listCisScanResultsAggregatedByTargetResource(software.amazon.awssdk.services.inspector2.model.ListCisScanResultsAggregatedByTargetResourceRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.inspector2.paginators.ListCisScanResultsAggregatedByTargetResourceIterable responses = client.listCisScanResultsAggregatedByTargetResourcePaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.inspector2.paginators.ListCisScanResultsAggregatedByTargetResourceIterable responses = client .listCisScanResultsAggregatedByTargetResourcePaginator(request); for (software.amazon.awssdk.services.inspector2.model.ListCisScanResultsAggregatedByTargetResourceResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.inspector2.paginators.ListCisScanResultsAggregatedByTargetResourceIterable responses = client.listCisScanResultsAggregatedByTargetResourcePaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listCisScanResultsAggregatedByTargetResource(software.amazon.awssdk.services.inspector2.model.ListCisScanResultsAggregatedByTargetResourceRequest) operation.
    Parameters:
    
    listCisScanResultsAggregatedByTargetResourceRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listCisScanResultsAggregatedByTargetResourcePaginator
```
default ListCisScanResultsAggregatedByTargetResourceIterable listCisScanResultsAggregatedByTargetResourcePaginator(Consumer<ListCisScanResultsAggregatedByTargetResourceRequest.Builder> listCisScanResultsAggregatedByTargetResourceRequest)
                                                                                                            throws AccessDeniedException,
                                                                                                                   ValidationException,
                                                                                                                   ThrottlingException,
                                                                                                                   InternalServerException,
                                                                                                                   AwsServiceException,
                                                                                                                   SdkClientException,
                                                                                                                   Inspector2Exception
```
    This is a variant of listCisScanResultsAggregatedByTargetResource(software.amazon.awssdk.services.inspector2.model.ListCisScanResultsAggregatedByTargetResourceRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.inspector2.paginators.ListCisScanResultsAggregatedByTargetResourceIterable responses = client.listCisScanResultsAggregatedByTargetResourcePaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.inspector2.paginators.ListCisScanResultsAggregatedByTargetResourceIterable responses = client .listCisScanResultsAggregatedByTargetResourcePaginator(request); for (software.amazon.awssdk.services.inspector2.model.ListCisScanResultsAggregatedByTargetResourceResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.inspector2.paginators.ListCisScanResultsAggregatedByTargetResourceIterable responses = client.listCisScanResultsAggregatedByTargetResourcePaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listCisScanResultsAggregatedByTargetResource(software.amazon.awssdk.services.inspector2.model.ListCisScanResultsAggregatedByTargetResourceRequest) operation.
    
    This is a convenience which creates an instance of the ListCisScanResultsAggregatedByTargetResourceRequest.Builder avoiding the need to create one manually via ListCisScanResultsAggregatedByTargetResourceRequest.builder()
    Parameters:
    
    listCisScanResultsAggregatedByTargetResourceRequest - A Consumer that will call methods on ListCisScanResultsAggregatedByTargetResourceRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listCisScans
```
default ListCisScansResponse listCisScans(ListCisScansRequest listCisScansRequest)
                                   throws AccessDeniedException,
                                          ValidationException,
                                          ThrottlingException,
                                          InternalServerException,
                                          AwsServiceException,
                                          SdkClientException,
                                          Inspector2Exception
```
    Returns a CIS scan list.
    
    Parameters:
    
    listCisScansRequest -
    
    Returns:
    
    Result of the ListCisScans operation returned by the service.
    
    Throws:
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listCisScans
```
default ListCisScansResponse listCisScans(Consumer<ListCisScansRequest.Builder> listCisScansRequest)
                                   throws AccessDeniedException,
                                          ValidationException,
                                          ThrottlingException,
                                          InternalServerException,
                                          AwsServiceException,
                                          SdkClientException,
                                          Inspector2Exception
```
    Returns a CIS scan list.
    
    This is a convenience which creates an instance of the ListCisScansRequest.Builder avoiding the need to create one manually via ListCisScansRequest.builder()
    
    Parameters:
    
    listCisScansRequest - A Consumer that will call methods on ListCisScansRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListCisScans operation returned by the service.
    
    Throws:
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listCisScansPaginator
```
default ListCisScansIterable listCisScansPaginator(ListCisScansRequest listCisScansRequest)
                                            throws AccessDeniedException,
                                                   ValidationException,
                                                   ThrottlingException,
                                                   InternalServerException,
                                                   AwsServiceException,
                                                   SdkClientException,
                                                   Inspector2Exception
```
    This is a variant of listCisScans(software.amazon.awssdk.services.inspector2.model.ListCisScansRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.inspector2.paginators.ListCisScansIterable responses = client.listCisScansPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.inspector2.paginators.ListCisScansIterable responses = client.listCisScansPaginator(request); for (software.amazon.awssdk.services.inspector2.model.ListCisScansResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.inspector2.paginators.ListCisScansIterable responses = client.listCisScansPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listCisScans(software.amazon.awssdk.services.inspector2.model.ListCisScansRequest) operation.
    Parameters:
    
    listCisScansRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listCisScansPaginator
```
default ListCisScansIterable listCisScansPaginator(Consumer<ListCisScansRequest.Builder> listCisScansRequest)
                                            throws AccessDeniedException,
                                                   ValidationException,
                                                   ThrottlingException,
                                                   InternalServerException,
                                                   AwsServiceException,
                                                   SdkClientException,
                                                   Inspector2Exception
```
    This is a variant of listCisScans(software.amazon.awssdk.services.inspector2.model.ListCisScansRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.inspector2.paginators.ListCisScansIterable responses = client.listCisScansPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.inspector2.paginators.ListCisScansIterable responses = client.listCisScansPaginator(request); for (software.amazon.awssdk.services.inspector2.model.ListCisScansResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.inspector2.paginators.ListCisScansIterable responses = client.listCisScansPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listCisScans(software.amazon.awssdk.services.inspector2.model.ListCisScansRequest) operation.
    
    This is a convenience which creates an instance of the ListCisScansRequest.Builder avoiding the need to create one manually via ListCisScansRequest.builder()
    Parameters:
    
    listCisScansRequest - A Consumer that will call methods on ListCisScansRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listCoverage
```
default ListCoverageResponse listCoverage(ListCoverageRequest listCoverageRequest)
                                   throws ValidationException,
                                          ThrottlingException,
                                          InternalServerException,
                                          AwsServiceException,
                                          SdkClientException,
                                          Inspector2Exception
```
    Lists coverage details for you environment.
    
    Parameters:
    
    listCoverageRequest -
    
    Returns:
    
    Result of the ListCoverage operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listCoverage
```
default ListCoverageResponse listCoverage(Consumer<ListCoverageRequest.Builder> listCoverageRequest)
                                   throws ValidationException,
                                          ThrottlingException,
                                          InternalServerException,
                                          AwsServiceException,
                                          SdkClientException,
                                          Inspector2Exception
```
    Lists coverage details for you environment.
    
    This is a convenience which creates an instance of the ListCoverageRequest.Builder avoiding the need to create one manually via ListCoverageRequest.builder()
    
    Parameters:
    
    listCoverageRequest - A Consumer that will call methods on ListCoverageRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListCoverage operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listCoveragePaginator
```
default ListCoverageIterable listCoveragePaginator(ListCoverageRequest listCoverageRequest)
                                            throws ValidationException,
                                                   ThrottlingException,
                                                   InternalServerException,
                                                   AwsServiceException,
                                                   SdkClientException,
                                                   Inspector2Exception
```
    This is a variant of listCoverage(software.amazon.awssdk.services.inspector2.model.ListCoverageRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.inspector2.paginators.ListCoverageIterable responses = client.listCoveragePaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.inspector2.paginators.ListCoverageIterable responses = client.listCoveragePaginator(request); for (software.amazon.awssdk.services.inspector2.model.ListCoverageResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.inspector2.paginators.ListCoverageIterable responses = client.listCoveragePaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listCoverage(software.amazon.awssdk.services.inspector2.model.ListCoverageRequest) operation.
    Parameters:
    
    listCoverageRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listCoveragePaginator
```
default ListCoverageIterable listCoveragePaginator(Consumer<ListCoverageRequest.Builder> listCoverageRequest)
                                            throws ValidationException,
                                                   ThrottlingException,
                                                   InternalServerException,
                                                   AwsServiceException,
                                                   SdkClientException,
                                                   Inspector2Exception
```
    This is a variant of listCoverage(software.amazon.awssdk.services.inspector2.model.ListCoverageRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.inspector2.paginators.ListCoverageIterable responses = client.listCoveragePaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.inspector2.paginators.ListCoverageIterable responses = client.listCoveragePaginator(request); for (software.amazon.awssdk.services.inspector2.model.ListCoverageResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.inspector2.paginators.ListCoverageIterable responses = client.listCoveragePaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listCoverage(software.amazon.awssdk.services.inspector2.model.ListCoverageRequest) operation.
    
    This is a convenience which creates an instance of the ListCoverageRequest.Builder avoiding the need to create one manually via ListCoverageRequest.builder()
    Parameters:
    
    listCoverageRequest - A Consumer that will call methods on ListCoverageRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listCoverageStatistics
```
default ListCoverageStatisticsResponse listCoverageStatistics(ListCoverageStatisticsRequest listCoverageStatisticsRequest)
                                                       throws ValidationException,
                                                              ThrottlingException,
                                                              InternalServerException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              Inspector2Exception
```
    Lists Amazon Inspector coverage statistics for your environment.
    
    Parameters:
    
    listCoverageStatisticsRequest -
    
    Returns:
    
    Result of the ListCoverageStatistics operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listCoverageStatistics
```
default ListCoverageStatisticsResponse listCoverageStatistics(Consumer<ListCoverageStatisticsRequest.Builder> listCoverageStatisticsRequest)
                                                       throws ValidationException,
                                                              ThrottlingException,
                                                              InternalServerException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              Inspector2Exception
```
    Lists Amazon Inspector coverage statistics for your environment.
    
    This is a convenience which creates an instance of the ListCoverageStatisticsRequest.Builder avoiding the need to create one manually via ListCoverageStatisticsRequest.builder()
    
    Parameters:
    
    listCoverageStatisticsRequest - A Consumer that will call methods on ListCoverageStatisticsRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListCoverageStatistics operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listCoverageStatisticsPaginator
```
default ListCoverageStatisticsIterable listCoverageStatisticsPaginator(ListCoverageStatisticsRequest listCoverageStatisticsRequest)
                                                                throws ValidationException,
                                                                       ThrottlingException,
                                                                       InternalServerException,
                                                                       AwsServiceException,
                                                                       SdkClientException,
                                                                       Inspector2Exception
```
    This is a variant of listCoverageStatistics(software.amazon.awssdk.services.inspector2.model.ListCoverageStatisticsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.inspector2.paginators.ListCoverageStatisticsIterable responses = client.listCoverageStatisticsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.inspector2.paginators.ListCoverageStatisticsIterable responses = client .listCoverageStatisticsPaginator(request); for (software.amazon.awssdk.services.inspector2.model.ListCoverageStatisticsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.inspector2.paginators.ListCoverageStatisticsIterable responses = client.listCoverageStatisticsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of null won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listCoverageStatistics(software.amazon.awssdk.services.inspector2.model.ListCoverageStatisticsRequest) operation.
    Parameters:
    
    listCoverageStatisticsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listCoverageStatisticsPaginator
```
default ListCoverageStatisticsIterable listCoverageStatisticsPaginator(Consumer<ListCoverageStatisticsRequest.Builder> listCoverageStatisticsRequest)
                                                                throws ValidationException,
                                                                       ThrottlingException,
                                                                       InternalServerException,
                                                                       AwsServiceException,
                                                                       SdkClientException,
                                                                       Inspector2Exception
```
    This is a variant of listCoverageStatistics(software.amazon.awssdk.services.inspector2.model.ListCoverageStatisticsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.inspector2.paginators.ListCoverageStatisticsIterable responses = client.listCoverageStatisticsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.inspector2.paginators.ListCoverageStatisticsIterable responses = client .listCoverageStatisticsPaginator(request); for (software.amazon.awssdk.services.inspector2.model.ListCoverageStatisticsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.inspector2.paginators.ListCoverageStatisticsIterable responses = client.listCoverageStatisticsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of null won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listCoverageStatistics(software.amazon.awssdk.services.inspector2.model.ListCoverageStatisticsRequest) operation.
    
    This is a convenience which creates an instance of the ListCoverageStatisticsRequest.Builder avoiding the need to create one manually via ListCoverageStatisticsRequest.builder()
    Parameters:
    
    listCoverageStatisticsRequest - A Consumer that will call methods on ListCoverageStatisticsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listDelegatedAdminAccounts
```
default ListDelegatedAdminAccountsResponse listDelegatedAdminAccounts(ListDelegatedAdminAccountsRequest listDelegatedAdminAccountsRequest)
                                                               throws ValidationException,
                                                                      AccessDeniedException,
                                                                      ThrottlingException,
                                                                      InternalServerException,
                                                                      AwsServiceException,
                                                                      SdkClientException,
                                                                      Inspector2Exception
```
    Lists information about the Amazon Inspector delegated administrator of your organization.
    
    Parameters:
    
    listDelegatedAdminAccountsRequest -
    
    Returns:
    
    Result of the ListDelegatedAdminAccounts operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listDelegatedAdminAccounts
```
default ListDelegatedAdminAccountsResponse listDelegatedAdminAccounts(Consumer<ListDelegatedAdminAccountsRequest.Builder> listDelegatedAdminAccountsRequest)
                                                               throws ValidationException,
                                                                      AccessDeniedException,
                                                                      ThrottlingException,
                                                                      InternalServerException,
                                                                      AwsServiceException,
                                                                      SdkClientException,
                                                                      Inspector2Exception
```
    Lists information about the Amazon Inspector delegated administrator of your organization.
    
    This is a convenience which creates an instance of the ListDelegatedAdminAccountsRequest.Builder avoiding the need to create one manually via ListDelegatedAdminAccountsRequest.builder()
    
    Parameters:
    
    listDelegatedAdminAccountsRequest - A Consumer that will call methods on ListDelegatedAdminAccountsRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListDelegatedAdminAccounts operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listDelegatedAdminAccountsPaginator
```
default ListDelegatedAdminAccountsIterable listDelegatedAdminAccountsPaginator(ListDelegatedAdminAccountsRequest listDelegatedAdminAccountsRequest)
                                                                        throws ValidationException,
                                                                               AccessDeniedException,
                                                                               ThrottlingException,
                                                                               InternalServerException,
                                                                               AwsServiceException,
                                                                               SdkClientException,
                                                                               Inspector2Exception
```
    This is a variant of listDelegatedAdminAccounts(software.amazon.awssdk.services.inspector2.model.ListDelegatedAdminAccountsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.inspector2.paginators.ListDelegatedAdminAccountsIterable responses = client.listDelegatedAdminAccountsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.inspector2.paginators.ListDelegatedAdminAccountsIterable responses = client .listDelegatedAdminAccountsPaginator(request); for (software.amazon.awssdk.services.inspector2.model.ListDelegatedAdminAccountsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.inspector2.paginators.ListDelegatedAdminAccountsIterable responses = client.listDelegatedAdminAccountsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listDelegatedAdminAccounts(software.amazon.awssdk.services.inspector2.model.ListDelegatedAdminAccountsRequest) operation.
    Parameters:
    
    listDelegatedAdminAccountsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listDelegatedAdminAccountsPaginator
```
default ListDelegatedAdminAccountsIterable listDelegatedAdminAccountsPaginator(Consumer<ListDelegatedAdminAccountsRequest.Builder> listDelegatedAdminAccountsRequest)
                                                                        throws ValidationException,
                                                                               AccessDeniedException,
                                                                               ThrottlingException,
                                                                               InternalServerException,
                                                                               AwsServiceException,
                                                                               SdkClientException,
                                                                               Inspector2Exception
```
    This is a variant of listDelegatedAdminAccounts(software.amazon.awssdk.services.inspector2.model.ListDelegatedAdminAccountsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.inspector2.paginators.ListDelegatedAdminAccountsIterable responses = client.listDelegatedAdminAccountsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.inspector2.paginators.ListDelegatedAdminAccountsIterable responses = client .listDelegatedAdminAccountsPaginator(request); for (software.amazon.awssdk.services.inspector2.model.ListDelegatedAdminAccountsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.inspector2.paginators.ListDelegatedAdminAccountsIterable responses = client.listDelegatedAdminAccountsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listDelegatedAdminAccounts(software.amazon.awssdk.services.inspector2.model.ListDelegatedAdminAccountsRequest) operation.
    
    This is a convenience which creates an instance of the ListDelegatedAdminAccountsRequest.Builder avoiding the need to create one manually via ListDelegatedAdminAccountsRequest.builder()
    Parameters:
    
    listDelegatedAdminAccountsRequest - A Consumer that will call methods on ListDelegatedAdminAccountsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listFilters
```
default ListFiltersResponse listFilters(ListFiltersRequest listFiltersRequest)
                                 throws ValidationException,
                                        AccessDeniedException,
                                        ThrottlingException,
                                        InternalServerException,
                                        AwsServiceException,
                                        SdkClientException,
                                        Inspector2Exception
```
    Lists the filters associated with your account.
    
    Parameters:
    
    listFiltersRequest -
    
    Returns:
    
    Result of the ListFilters operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listFilters
```
default ListFiltersResponse listFilters(Consumer<ListFiltersRequest.Builder> listFiltersRequest)
                                 throws ValidationException,
                                        AccessDeniedException,
                                        ThrottlingException,
                                        InternalServerException,
                                        AwsServiceException,
                                        SdkClientException,
                                        Inspector2Exception
```
    Lists the filters associated with your account.
    
    This is a convenience which creates an instance of the ListFiltersRequest.Builder avoiding the need to create one manually via ListFiltersRequest.builder()
    
    Parameters:
    
    listFiltersRequest - A Consumer that will call methods on ListFiltersRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListFilters operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listFiltersPaginator
```
default ListFiltersIterable listFiltersPaginator(ListFiltersRequest listFiltersRequest)
                                          throws ValidationException,
                                                 AccessDeniedException,
                                                 ThrottlingException,
                                                 InternalServerException,
                                                 AwsServiceException,
                                                 SdkClientException,
                                                 Inspector2Exception
```
    This is a variant of listFilters(software.amazon.awssdk.services.inspector2.model.ListFiltersRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.inspector2.paginators.ListFiltersIterable responses = client.listFiltersPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.inspector2.paginators.ListFiltersIterable responses = client.listFiltersPaginator(request); for (software.amazon.awssdk.services.inspector2.model.ListFiltersResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.inspector2.paginators.ListFiltersIterable responses = client.listFiltersPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listFilters(software.amazon.awssdk.services.inspector2.model.ListFiltersRequest) operation.
    Parameters:
    
    listFiltersRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listFiltersPaginator
```
default ListFiltersIterable listFiltersPaginator(Consumer<ListFiltersRequest.Builder> listFiltersRequest)
                                          throws ValidationException,
                                                 AccessDeniedException,
                                                 ThrottlingException,
                                                 InternalServerException,
                                                 AwsServiceException,
                                                 SdkClientException,
                                                 Inspector2Exception
```
    This is a variant of listFilters(software.amazon.awssdk.services.inspector2.model.ListFiltersRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.inspector2.paginators.ListFiltersIterable responses = client.listFiltersPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.inspector2.paginators.ListFiltersIterable responses = client.listFiltersPaginator(request); for (software.amazon.awssdk.services.inspector2.model.ListFiltersResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.inspector2.paginators.ListFiltersIterable responses = client.listFiltersPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listFilters(software.amazon.awssdk.services.inspector2.model.ListFiltersRequest) operation.
    
    This is a convenience which creates an instance of the ListFiltersRequest.Builder avoiding the need to create one manually via ListFiltersRequest.builder()
    Parameters:
    
    listFiltersRequest - A Consumer that will call methods on ListFiltersRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listFindingAggregations
```
default ListFindingAggregationsResponse listFindingAggregations(ListFindingAggregationsRequest listFindingAggregationsRequest)
                                                         throws ValidationException,
                                                                ThrottlingException,
                                                                InternalServerException,
                                                                AwsServiceException,
                                                                SdkClientException,
                                                                Inspector2Exception
```
    Lists aggregated finding data for your environment based on specific criteria.
    
    Parameters:
    
    listFindingAggregationsRequest -
    
    Returns:
    
    Result of the ListFindingAggregations operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listFindingAggregations
```
default ListFindingAggregationsResponse listFindingAggregations(Consumer<ListFindingAggregationsRequest.Builder> listFindingAggregationsRequest)
                                                         throws ValidationException,
                                                                ThrottlingException,
                                                                InternalServerException,
                                                                AwsServiceException,
                                                                SdkClientException,
                                                                Inspector2Exception
```
    Lists aggregated finding data for your environment based on specific criteria.
    
    This is a convenience which creates an instance of the ListFindingAggregationsRequest.Builder avoiding the need to create one manually via ListFindingAggregationsRequest.builder()
    
    Parameters:
    
    listFindingAggregationsRequest - A Consumer that will call methods on ListFindingAggregationsRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListFindingAggregations operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listFindingAggregationsPaginator
```
default ListFindingAggregationsIterable listFindingAggregationsPaginator(ListFindingAggregationsRequest listFindingAggregationsRequest)
                                                                  throws ValidationException,
                                                                         ThrottlingException,
                                                                         InternalServerException,
                                                                         AwsServiceException,
                                                                         SdkClientException,
                                                                         Inspector2Exception
```
    This is a variant of listFindingAggregations(software.amazon.awssdk.services.inspector2.model.ListFindingAggregationsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.inspector2.paginators.ListFindingAggregationsIterable responses = client.listFindingAggregationsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.inspector2.paginators.ListFindingAggregationsIterable responses = client .listFindingAggregationsPaginator(request); for (software.amazon.awssdk.services.inspector2.model.ListFindingAggregationsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.inspector2.paginators.ListFindingAggregationsIterable responses = client.listFindingAggregationsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listFindingAggregations(software.amazon.awssdk.services.inspector2.model.ListFindingAggregationsRequest) operation.
    Parameters:
    
    listFindingAggregationsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listFindingAggregationsPaginator
```
default ListFindingAggregationsIterable listFindingAggregationsPaginator(Consumer<ListFindingAggregationsRequest.Builder> listFindingAggregationsRequest)
                                                                  throws ValidationException,
                                                                         ThrottlingException,
                                                                         InternalServerException,
                                                                         AwsServiceException,
                                                                         SdkClientException,
                                                                         Inspector2Exception
```
    This is a variant of listFindingAggregations(software.amazon.awssdk.services.inspector2.model.ListFindingAggregationsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.inspector2.paginators.ListFindingAggregationsIterable responses = client.listFindingAggregationsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.inspector2.paginators.ListFindingAggregationsIterable responses = client .listFindingAggregationsPaginator(request); for (software.amazon.awssdk.services.inspector2.model.ListFindingAggregationsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.inspector2.paginators.ListFindingAggregationsIterable responses = client.listFindingAggregationsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listFindingAggregations(software.amazon.awssdk.services.inspector2.model.ListFindingAggregationsRequest) operation.
    
    This is a convenience which creates an instance of the ListFindingAggregationsRequest.Builder avoiding the need to create one manually via ListFindingAggregationsRequest.builder()
    Parameters:
    
    listFindingAggregationsRequest - A Consumer that will call methods on ListFindingAggregationsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listFindings
```
default ListFindingsResponse listFindings(ListFindingsRequest listFindingsRequest)
                                   throws ValidationException,
                                          ThrottlingException,
                                          InternalServerException,
                                          AwsServiceException,
                                          SdkClientException,
                                          Inspector2Exception
```
    Lists findings for your environment.
    
    Parameters:
    
    listFindingsRequest -
    
    Returns:
    
    Result of the ListFindings operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listFindings
```
default ListFindingsResponse listFindings(Consumer<ListFindingsRequest.Builder> listFindingsRequest)
                                   throws ValidationException,
                                          ThrottlingException,
                                          InternalServerException,
                                          AwsServiceException,
                                          SdkClientException,
                                          Inspector2Exception
```
    Lists findings for your environment.
    
    This is a convenience which creates an instance of the ListFindingsRequest.Builder avoiding the need to create one manually via ListFindingsRequest.builder()
    
    Parameters:
    
    listFindingsRequest - A Consumer that will call methods on ListFindingsRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListFindings operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listFindingsPaginator
```
default ListFindingsIterable listFindingsPaginator(ListFindingsRequest listFindingsRequest)
                                            throws ValidationException,
                                                   ThrottlingException,
                                                   InternalServerException,
                                                   AwsServiceException,
                                                   SdkClientException,
                                                   Inspector2Exception
```
    This is a variant of listFindings(software.amazon.awssdk.services.inspector2.model.ListFindingsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.inspector2.paginators.ListFindingsIterable responses = client.listFindingsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.inspector2.paginators.ListFindingsIterable responses = client.listFindingsPaginator(request); for (software.amazon.awssdk.services.inspector2.model.ListFindingsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.inspector2.paginators.ListFindingsIterable responses = client.listFindingsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listFindings(software.amazon.awssdk.services.inspector2.model.ListFindingsRequest) operation.
    Parameters:
    
    listFindingsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listFindingsPaginator
```
default ListFindingsIterable listFindingsPaginator(Consumer<ListFindingsRequest.Builder> listFindingsRequest)
                                            throws ValidationException,
                                                   ThrottlingException,
                                                   InternalServerException,
                                                   AwsServiceException,
                                                   SdkClientException,
                                                   Inspector2Exception
```
    This is a variant of listFindings(software.amazon.awssdk.services.inspector2.model.ListFindingsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.inspector2.paginators.ListFindingsIterable responses = client.listFindingsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.inspector2.paginators.ListFindingsIterable responses = client.listFindingsPaginator(request); for (software.amazon.awssdk.services.inspector2.model.ListFindingsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.inspector2.paginators.ListFindingsIterable responses = client.listFindingsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listFindings(software.amazon.awssdk.services.inspector2.model.ListFindingsRequest) operation.
    
    This is a convenience which creates an instance of the ListFindingsRequest.Builder avoiding the need to create one manually via ListFindingsRequest.builder()
    Parameters:
    
    listFindingsRequest - A Consumer that will call methods on ListFindingsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listMembers
```
default ListMembersResponse listMembers(ListMembersRequest listMembersRequest)
                                 throws ValidationException,
                                        AccessDeniedException,
                                        ThrottlingException,
                                        InternalServerException,
                                        AwsServiceException,
                                        SdkClientException,
                                        Inspector2Exception
```
    List members associated with the Amazon Inspector delegated administrator for your organization.
    
    Parameters:
    
    listMembersRequest -
    
    Returns:
    
    Result of the ListMembers operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listMembers
```
default ListMembersResponse listMembers(Consumer<ListMembersRequest.Builder> listMembersRequest)
                                 throws ValidationException,
                                        AccessDeniedException,
                                        ThrottlingException,
                                        InternalServerException,
                                        AwsServiceException,
                                        SdkClientException,
                                        Inspector2Exception
```
    List members associated with the Amazon Inspector delegated administrator for your organization.
    
    This is a convenience which creates an instance of the ListMembersRequest.Builder avoiding the need to create one manually via ListMembersRequest.builder()
    
    Parameters:
    
    listMembersRequest - A Consumer that will call methods on ListMembersRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListMembers operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listMembersPaginator
```
default ListMembersIterable listMembersPaginator(ListMembersRequest listMembersRequest)
                                          throws ValidationException,
                                                 AccessDeniedException,
                                                 ThrottlingException,
                                                 InternalServerException,
                                                 AwsServiceException,
                                                 SdkClientException,
                                                 Inspector2Exception
```
    This is a variant of listMembers(software.amazon.awssdk.services.inspector2.model.ListMembersRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.inspector2.paginators.ListMembersIterable responses = client.listMembersPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.inspector2.paginators.ListMembersIterable responses = client.listMembersPaginator(request); for (software.amazon.awssdk.services.inspector2.model.ListMembersResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.inspector2.paginators.ListMembersIterable responses = client.listMembersPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listMembers(software.amazon.awssdk.services.inspector2.model.ListMembersRequest) operation.
    Parameters:
    
    listMembersRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listMembersPaginator
```
default ListMembersIterable listMembersPaginator(Consumer<ListMembersRequest.Builder> listMembersRequest)
                                          throws ValidationException,
                                                 AccessDeniedException,
                                                 ThrottlingException,
                                                 InternalServerException,
                                                 AwsServiceException,
                                                 SdkClientException,
                                                 Inspector2Exception
```
    This is a variant of listMembers(software.amazon.awssdk.services.inspector2.model.ListMembersRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.inspector2.paginators.ListMembersIterable responses = client.listMembersPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.inspector2.paginators.ListMembersIterable responses = client.listMembersPaginator(request); for (software.amazon.awssdk.services.inspector2.model.ListMembersResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.inspector2.paginators.ListMembersIterable responses = client.listMembersPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listMembers(software.amazon.awssdk.services.inspector2.model.ListMembersRequest) operation.
    
    This is a convenience which creates an instance of the ListMembersRequest.Builder avoiding the need to create one manually via ListMembersRequest.builder()
    Parameters:
    
    listMembersRequest - A Consumer that will call methods on ListMembersRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listTagsForResource
```
default ListTagsForResourceResponse listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)
                                                 throws ValidationException,
                                                        ResourceNotFoundException,
                                                        ThrottlingException,
                                                        InternalServerException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        Inspector2Exception
```
    Lists all tags attached to a given resource.
    
    Parameters:
    
    listTagsForResourceRequest -
    
    Returns:
    
    Result of the ListTagsForResource operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listTagsForResource
```
default ListTagsForResourceResponse listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)
                                                 throws ValidationException,
                                                        ResourceNotFoundException,
                                                        ThrottlingException,
                                                        InternalServerException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        Inspector2Exception
```
    Lists all tags attached to a given resource.
    
    This is a convenience which creates an instance of the ListTagsForResourceRequest.Builder avoiding the need to create one manually via ListTagsForResourceRequest.builder()
    
    Parameters:
    
    listTagsForResourceRequest - A Consumer that will call methods on ListTagsForResourceRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListTagsForResource operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listUsageTotals
```
default ListUsageTotalsResponse listUsageTotals(ListUsageTotalsRequest listUsageTotalsRequest)
                                         throws ValidationException,
                                                AccessDeniedException,
                                                ThrottlingException,
                                                InternalServerException,
                                                AwsServiceException,
                                                SdkClientException,
                                                Inspector2Exception
```
    Lists the Amazon Inspector usage totals over the last 30 days.
    
    Parameters:
    
    listUsageTotalsRequest -
    
    Returns:
    
    Result of the ListUsageTotals operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listUsageTotals
```
default ListUsageTotalsResponse listUsageTotals(Consumer<ListUsageTotalsRequest.Builder> listUsageTotalsRequest)
                                         throws ValidationException,
                                                AccessDeniedException,
                                                ThrottlingException,
                                                InternalServerException,
                                                AwsServiceException,
                                                SdkClientException,
                                                Inspector2Exception
```
    Lists the Amazon Inspector usage totals over the last 30 days.
    
    This is a convenience which creates an instance of the ListUsageTotalsRequest.Builder avoiding the need to create one manually via ListUsageTotalsRequest.builder()
    
    Parameters:
    
    listUsageTotalsRequest - A Consumer that will call methods on ListUsageTotalsRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListUsageTotals operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listUsageTotalsPaginator
```
default ListUsageTotalsIterable listUsageTotalsPaginator(ListUsageTotalsRequest listUsageTotalsRequest)
                                                  throws ValidationException,
                                                         AccessDeniedException,
                                                         ThrottlingException,
                                                         InternalServerException,
                                                         AwsServiceException,
                                                         SdkClientException,
                                                         Inspector2Exception
```
    This is a variant of listUsageTotals(software.amazon.awssdk.services.inspector2.model.ListUsageTotalsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.inspector2.paginators.ListUsageTotalsIterable responses = client.listUsageTotalsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.inspector2.paginators.ListUsageTotalsIterable responses = client .listUsageTotalsPaginator(request); for (software.amazon.awssdk.services.inspector2.model.ListUsageTotalsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.inspector2.paginators.ListUsageTotalsIterable responses = client.listUsageTotalsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listUsageTotals(software.amazon.awssdk.services.inspector2.model.ListUsageTotalsRequest) operation.
    Parameters:
    
    listUsageTotalsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listUsageTotalsPaginator
```
default ListUsageTotalsIterable listUsageTotalsPaginator(Consumer<ListUsageTotalsRequest.Builder> listUsageTotalsRequest)
                                                  throws ValidationException,
                                                         AccessDeniedException,
                                                         ThrottlingException,
                                                         InternalServerException,
                                                         AwsServiceException,
                                                         SdkClientException,
                                                         Inspector2Exception
```
    This is a variant of listUsageTotals(software.amazon.awssdk.services.inspector2.model.ListUsageTotalsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.inspector2.paginators.ListUsageTotalsIterable responses = client.listUsageTotalsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.inspector2.paginators.ListUsageTotalsIterable responses = client .listUsageTotalsPaginator(request); for (software.amazon.awssdk.services.inspector2.model.ListUsageTotalsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.inspector2.paginators.ListUsageTotalsIterable responses = client.listUsageTotalsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listUsageTotals(software.amazon.awssdk.services.inspector2.model.ListUsageTotalsRequest) operation.
    
    This is a convenience which creates an instance of the ListUsageTotalsRequest.Builder avoiding the need to create one manually via ListUsageTotalsRequest.builder()
    Parameters:
    
    listUsageTotalsRequest - A Consumer that will call methods on ListUsageTotalsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - resetEncryptionKey
```
default ResetEncryptionKeyResponse resetEncryptionKey(ResetEncryptionKeyRequest resetEncryptionKeyRequest)
                                               throws ValidationException,
                                                      AccessDeniedException,
                                                      ThrottlingException,
                                                      ResourceNotFoundException,
                                                      InternalServerException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      Inspector2Exception
```
    Resets an encryption key. After the key is reset your resources will be encrypted by an Amazon Web Services owned key.
    
    Parameters:
    
    resetEncryptionKeyRequest -
    
    Returns:
    
    Result of the ResetEncryptionKey operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - resetEncryptionKey
```
default ResetEncryptionKeyResponse resetEncryptionKey(Consumer<ResetEncryptionKeyRequest.Builder> resetEncryptionKeyRequest)
                                               throws ValidationException,
                                                      AccessDeniedException,
                                                      ThrottlingException,
                                                      ResourceNotFoundException,
                                                      InternalServerException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      Inspector2Exception
```
    Resets an encryption key. After the key is reset your resources will be encrypted by an Amazon Web Services owned key.
    
    This is a convenience which creates an instance of the ResetEncryptionKeyRequest.Builder avoiding the need to create one manually via ResetEncryptionKeyRequest.builder()
    
    Parameters:
    
    resetEncryptionKeyRequest - A Consumer that will call methods on ResetEncryptionKeyRequest.Builder to create a request.
    
    Returns:
    
    Result of the ResetEncryptionKey operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - searchVulnerabilities
```
default SearchVulnerabilitiesResponse searchVulnerabilities(SearchVulnerabilitiesRequest searchVulnerabilitiesRequest)
                                                     throws ValidationException,
                                                            AccessDeniedException,
                                                            ThrottlingException,
                                                            InternalServerException,
                                                            AwsServiceException,
                                                            SdkClientException,
                                                            Inspector2Exception
```
    Lists Amazon Inspector coverage details for a specific vulnerability.
    
    Parameters:
    
    searchVulnerabilitiesRequest -
    
    Returns:
    
    Result of the SearchVulnerabilities operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - searchVulnerabilities
```
default SearchVulnerabilitiesResponse searchVulnerabilities(Consumer<SearchVulnerabilitiesRequest.Builder> searchVulnerabilitiesRequest)
                                                     throws ValidationException,
                                                            AccessDeniedException,
                                                            ThrottlingException,
                                                            InternalServerException,
                                                            AwsServiceException,
                                                            SdkClientException,
                                                            Inspector2Exception
```
    Lists Amazon Inspector coverage details for a specific vulnerability.
    
    This is a convenience which creates an instance of the SearchVulnerabilitiesRequest.Builder avoiding the need to create one manually via SearchVulnerabilitiesRequest.builder()
    
    Parameters:
    
    searchVulnerabilitiesRequest - A Consumer that will call methods on SearchVulnerabilitiesRequest.Builder to create a request.
    
    Returns:
    
    Result of the SearchVulnerabilities operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - searchVulnerabilitiesPaginator
```
default SearchVulnerabilitiesIterable searchVulnerabilitiesPaginator(SearchVulnerabilitiesRequest searchVulnerabilitiesRequest)
                                                              throws ValidationException,
                                                                     AccessDeniedException,
                                                                     ThrottlingException,
                                                                     InternalServerException,
                                                                     AwsServiceException,
                                                                     SdkClientException,
                                                                     Inspector2Exception
```
    This is a variant of searchVulnerabilities(software.amazon.awssdk.services.inspector2.model.SearchVulnerabilitiesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.inspector2.paginators.SearchVulnerabilitiesIterable responses = client.searchVulnerabilitiesPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.inspector2.paginators.SearchVulnerabilitiesIterable responses = client .searchVulnerabilitiesPaginator(request); for (software.amazon.awssdk.services.inspector2.model.SearchVulnerabilitiesResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.inspector2.paginators.SearchVulnerabilitiesIterable responses = client.searchVulnerabilitiesPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of null won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the searchVulnerabilities(software.amazon.awssdk.services.inspector2.model.SearchVulnerabilitiesRequest) operation.
    Parameters:
    
    searchVulnerabilitiesRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - searchVulnerabilitiesPaginator
```
default SearchVulnerabilitiesIterable searchVulnerabilitiesPaginator(Consumer<SearchVulnerabilitiesRequest.Builder> searchVulnerabilitiesRequest)
                                                              throws ValidationException,
                                                                     AccessDeniedException,
                                                                     ThrottlingException,
                                                                     InternalServerException,
                                                                     AwsServiceException,
                                                                     SdkClientException,
                                                                     Inspector2Exception
```
    This is a variant of searchVulnerabilities(software.amazon.awssdk.services.inspector2.model.SearchVulnerabilitiesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.inspector2.paginators.SearchVulnerabilitiesIterable responses = client.searchVulnerabilitiesPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.inspector2.paginators.SearchVulnerabilitiesIterable responses = client .searchVulnerabilitiesPaginator(request); for (software.amazon.awssdk.services.inspector2.model.SearchVulnerabilitiesResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.inspector2.paginators.SearchVulnerabilitiesIterable responses = client.searchVulnerabilitiesPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of null won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the searchVulnerabilities(software.amazon.awssdk.services.inspector2.model.SearchVulnerabilitiesRequest) operation.
    
    This is a convenience which creates an instance of the SearchVulnerabilitiesRequest.Builder avoiding the need to create one manually via SearchVulnerabilitiesRequest.builder()
    Parameters:
    
    searchVulnerabilitiesRequest - A Consumer that will call methods on SearchVulnerabilitiesRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - sendCisSessionHealth
```
default SendCisSessionHealthResponse sendCisSessionHealth(SendCisSessionHealthRequest sendCisSessionHealthRequest)
                                                   throws ConflictException,
                                                          ValidationException,
                                                          AccessDeniedException,
                                                          ThrottlingException,
                                                          InternalServerException,
                                                          AwsServiceException,
                                                          SdkClientException,
                                                          Inspector2Exception
```
    Sends a CIS session health. This API is used by the Amazon Inspector SSM plugin to communicate with the Amazon Inspector service. The Amazon Inspector SSM plugin calls this API to start a CIS scan session for the scan ID supplied by the service.
    
    Parameters:
    
    sendCisSessionHealthRequest -
    
    Returns:
    
    Result of the SendCisSessionHealth operation returned by the service.
    
    Throws:
    
    ConflictException - A conflict occurred.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - sendCisSessionHealth
```
default SendCisSessionHealthResponse sendCisSessionHealth(Consumer<SendCisSessionHealthRequest.Builder> sendCisSessionHealthRequest)
                                                   throws ConflictException,
                                                          ValidationException,
                                                          AccessDeniedException,
                                                          ThrottlingException,
                                                          InternalServerException,
                                                          AwsServiceException,
                                                          SdkClientException,
                                                          Inspector2Exception
```
    Sends a CIS session health. This API is used by the Amazon Inspector SSM plugin to communicate with the Amazon Inspector service. The Amazon Inspector SSM plugin calls this API to start a CIS scan session for the scan ID supplied by the service.
    
    This is a convenience which creates an instance of the SendCisSessionHealthRequest.Builder avoiding the need to create one manually via SendCisSessionHealthRequest.builder()
    
    Parameters:
    
    sendCisSessionHealthRequest - A Consumer that will call methods on SendCisSessionHealthRequest.Builder to create a request.
    
    Returns:
    
    Result of the SendCisSessionHealth operation returned by the service.
    
    Throws:
    
    ConflictException - A conflict occurred.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - sendCisSessionTelemetry
```
default SendCisSessionTelemetryResponse sendCisSessionTelemetry(SendCisSessionTelemetryRequest sendCisSessionTelemetryRequest)
                                                         throws ConflictException,
                                                                ValidationException,
                                                                AccessDeniedException,
                                                                ThrottlingException,
                                                                InternalServerException,
                                                                AwsServiceException,
                                                                SdkClientException,
                                                                Inspector2Exception
```
    Sends a CIS session telemetry. This API is used by the Amazon Inspector SSM plugin to communicate with the Amazon Inspector service. The Amazon Inspector SSM plugin calls this API to start a CIS scan session for the scan ID supplied by the service.
    
    Parameters:
    
    sendCisSessionTelemetryRequest -
    
    Returns:
    
    Result of the SendCisSessionTelemetry operation returned by the service.
    
    Throws:
    
    ConflictException - A conflict occurred.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - sendCisSessionTelemetry
```
default SendCisSessionTelemetryResponse sendCisSessionTelemetry(Consumer<SendCisSessionTelemetryRequest.Builder> sendCisSessionTelemetryRequest)
                                                         throws ConflictException,
                                                                ValidationException,
                                                                AccessDeniedException,
                                                                ThrottlingException,
                                                                InternalServerException,
                                                                AwsServiceException,
                                                                SdkClientException,
                                                                Inspector2Exception
```
    Sends a CIS session telemetry. This API is used by the Amazon Inspector SSM plugin to communicate with the Amazon Inspector service. The Amazon Inspector SSM plugin calls this API to start a CIS scan session for the scan ID supplied by the service.
    
    This is a convenience which creates an instance of the SendCisSessionTelemetryRequest.Builder avoiding the need to create one manually via SendCisSessionTelemetryRequest.builder()
    
    Parameters:
    
    sendCisSessionTelemetryRequest - A Consumer that will call methods on SendCisSessionTelemetryRequest.Builder to create a request.
    
    Returns:
    
    Result of the SendCisSessionTelemetry operation returned by the service.
    
    Throws:
    
    ConflictException - A conflict occurred.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - startCisSession
```
default StartCisSessionResponse startCisSession(StartCisSessionRequest startCisSessionRequest)
                                         throws ConflictException,
                                                ValidationException,
                                                AccessDeniedException,
                                                ThrottlingException,
                                                InternalServerException,
                                                AwsServiceException,
                                                SdkClientException,
                                                Inspector2Exception
```
    Starts a CIS session. This API is used by the Amazon Inspector SSM plugin to communicate with the Amazon Inspector service. The Amazon Inspector SSM plugin calls this API to start a CIS scan session for the scan ID supplied by the service.
    
    Parameters:
    
    startCisSessionRequest -
    
    Returns:
    
    Result of the StartCisSession operation returned by the service.
    
    Throws:
    
    ConflictException - A conflict occurred.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - startCisSession
```
default StartCisSessionResponse startCisSession(Consumer<StartCisSessionRequest.Builder> startCisSessionRequest)
                                         throws ConflictException,
                                                ValidationException,
                                                AccessDeniedException,
                                                ThrottlingException,
                                                InternalServerException,
                                                AwsServiceException,
                                                SdkClientException,
                                                Inspector2Exception
```
    Starts a CIS session. This API is used by the Amazon Inspector SSM plugin to communicate with the Amazon Inspector service. The Amazon Inspector SSM plugin calls this API to start a CIS scan session for the scan ID supplied by the service.
    
    This is a convenience which creates an instance of the StartCisSessionRequest.Builder avoiding the need to create one manually via StartCisSessionRequest.builder()
    
    Parameters:
    
    startCisSessionRequest - A Consumer that will call methods on StartCisSessionRequest.Builder to create a request.
    
    Returns:
    
    Result of the StartCisSession operation returned by the service.
    
    Throws:
    
    ConflictException - A conflict occurred.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - stopCisSession
```
default StopCisSessionResponse stopCisSession(StopCisSessionRequest stopCisSessionRequest)
                                       throws ConflictException,
                                              ValidationException,
                                              AccessDeniedException,
                                              ThrottlingException,
                                              InternalServerException,
                                              AwsServiceException,
                                              SdkClientException,
                                              Inspector2Exception
```
    Stops a CIS session. This API is used by the Amazon Inspector SSM plugin to communicate with the Amazon Inspector service. The Amazon Inspector SSM plugin calls this API to start a CIS scan session for the scan ID supplied by the service.
    
    Parameters:
    
    stopCisSessionRequest -
    
    Returns:
    
    Result of the StopCisSession operation returned by the service.
    
    Throws:
    
    ConflictException - A conflict occurred.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - stopCisSession
```
default StopCisSessionResponse stopCisSession(Consumer<StopCisSessionRequest.Builder> stopCisSessionRequest)
                                       throws ConflictException,
                                              ValidationException,
                                              AccessDeniedException,
                                              ThrottlingException,
                                              InternalServerException,
                                              AwsServiceException,
                                              SdkClientException,
                                              Inspector2Exception
```
    Stops a CIS session. This API is used by the Amazon Inspector SSM plugin to communicate with the Amazon Inspector service. The Amazon Inspector SSM plugin calls this API to start a CIS scan session for the scan ID supplied by the service.
    
    This is a convenience which creates an instance of the StopCisSessionRequest.Builder avoiding the need to create one manually via StopCisSessionRequest.builder()
    
    Parameters:
    
    stopCisSessionRequest - A Consumer that will call methods on StopCisSessionRequest.Builder to create a request.
    
    Returns:
    
    Result of the StopCisSession operation returned by the service.
    
    Throws:
    
    ConflictException - A conflict occurred.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - tagResource
```
default TagResourceResponse tagResource(TagResourceRequest tagResourceRequest)
                                 throws BadRequestException,
                                        ValidationException,
                                        ResourceNotFoundException,
                                        ThrottlingException,
                                        InternalServerException,
                                        AwsServiceException,
                                        SdkClientException,
                                        Inspector2Exception
```
    Adds tags to a resource.
    
    Parameters:
    
    tagResourceRequest -
    
    Returns:
    
    Result of the TagResource operation returned by the service.
    
    Throws:
    
    BadRequestException - One or more tags submitted as part of the request is not valid.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - tagResource
```
default TagResourceResponse tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)
                                 throws BadRequestException,
                                        ValidationException,
                                        ResourceNotFoundException,
                                        ThrottlingException,
                                        InternalServerException,
                                        AwsServiceException,
                                        SdkClientException,
                                        Inspector2Exception
```
    Adds tags to a resource.
    
    This is a convenience which creates an instance of the TagResourceRequest.Builder avoiding the need to create one manually via TagResourceRequest.builder()
    
    Parameters:
    
    tagResourceRequest - A Consumer that will call methods on TagResourceRequest.Builder to create a request.
    
    Returns:
    
    Result of the TagResource operation returned by the service.
    
    Throws:
    
    BadRequestException - One or more tags submitted as part of the request is not valid.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - untagResource
```
default UntagResourceResponse untagResource(UntagResourceRequest untagResourceRequest)
                                     throws ValidationException,
                                            ResourceNotFoundException,
                                            ThrottlingException,
                                            InternalServerException,
                                            AwsServiceException,
                                            SdkClientException,
                                            Inspector2Exception
```
    Removes tags from a resource.
    
    Parameters:
    
    untagResourceRequest -
    
    Returns:
    
    Result of the UntagResource operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - untagResource
```
default UntagResourceResponse untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)
                                     throws ValidationException,
                                            ResourceNotFoundException,
                                            ThrottlingException,
                                            InternalServerException,
                                            AwsServiceException,
                                            SdkClientException,
                                            Inspector2Exception
```
    Removes tags from a resource.
    
    This is a convenience which creates an instance of the UntagResourceRequest.Builder avoiding the need to create one manually via UntagResourceRequest.builder()
    
    Parameters:
    
    untagResourceRequest - A Consumer that will call methods on UntagResourceRequest.Builder to create a request.
    
    Returns:
    
    Result of the UntagResource operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateCisScanConfiguration
```
default UpdateCisScanConfigurationResponse updateCisScanConfiguration(UpdateCisScanConfigurationRequest updateCisScanConfigurationRequest)
                                                               throws ValidationException,
                                                                      AccessDeniedException,
                                                                      ResourceNotFoundException,
                                                                      ThrottlingException,
                                                                      InternalServerException,
                                                                      AwsServiceException,
                                                                      SdkClientException,
                                                                      Inspector2Exception
```
    Updates a CIS scan configuration.
    
    Parameters:
    
    updateCisScanConfigurationRequest -
    
    Returns:
    
    Result of the UpdateCisScanConfiguration operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateCisScanConfiguration
```
default UpdateCisScanConfigurationResponse updateCisScanConfiguration(Consumer<UpdateCisScanConfigurationRequest.Builder> updateCisScanConfigurationRequest)
                                                               throws ValidationException,
                                                                      AccessDeniedException,
                                                                      ResourceNotFoundException,
                                                                      ThrottlingException,
                                                                      InternalServerException,
                                                                      AwsServiceException,
                                                                      SdkClientException,
                                                                      Inspector2Exception
```
    Updates a CIS scan configuration.
    
    This is a convenience which creates an instance of the UpdateCisScanConfigurationRequest.Builder avoiding the need to create one manually via UpdateCisScanConfigurationRequest.builder()
    
    Parameters:
    
    updateCisScanConfigurationRequest - A Consumer that will call methods on UpdateCisScanConfigurationRequest.Builder to create a request.
    
    Returns:
    
    Result of the UpdateCisScanConfiguration operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateConfiguration
```
default UpdateConfigurationResponse updateConfiguration(UpdateConfigurationRequest updateConfigurationRequest)
                                                 throws ValidationException,
                                                        AccessDeniedException,
                                                        ThrottlingException,
                                                        InternalServerException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        Inspector2Exception
```
    Updates setting configurations for your Amazon Inspector account. When you use this API as an Amazon Inspector delegated administrator this updates the setting for all accounts you manage. Member accounts in an organization cannot update this setting.
    
    Parameters:
    
    updateConfigurationRequest -
    
    Returns:
    
    Result of the UpdateConfiguration operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateConfiguration
```
default UpdateConfigurationResponse updateConfiguration(Consumer<UpdateConfigurationRequest.Builder> updateConfigurationRequest)
                                                 throws ValidationException,
                                                        AccessDeniedException,
                                                        ThrottlingException,
                                                        InternalServerException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        Inspector2Exception
```
    Updates setting configurations for your Amazon Inspector account. When you use this API as an Amazon Inspector delegated administrator this updates the setting for all accounts you manage. Member accounts in an organization cannot update this setting.
    
    This is a convenience which creates an instance of the UpdateConfigurationRequest.Builder avoiding the need to create one manually via UpdateConfigurationRequest.builder()
    
    Parameters:
    
    updateConfigurationRequest - A Consumer that will call methods on UpdateConfigurationRequest.Builder to create a request.
    
    Returns:
    
    Result of the UpdateConfiguration operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateEc2DeepInspectionConfiguration
```
default UpdateEc2DeepInspectionConfigurationResponse updateEc2DeepInspectionConfiguration(UpdateEc2DeepInspectionConfigurationRequest updateEc2DeepInspectionConfigurationRequest)
                                                                                   throws ValidationException,
                                                                                          AccessDeniedException,
                                                                                          ThrottlingException,
                                                                                          InternalServerException,
                                                                                          AwsServiceException,
                                                                                          SdkClientException,
                                                                                          Inspector2Exception
```
    Activates, deactivates Amazon Inspector deep inspection, or updates custom paths for your account.
    
    Parameters:
    
    updateEc2DeepInspectionConfigurationRequest -
    
    Returns:
    
    Result of the UpdateEc2DeepInspectionConfiguration operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateEc2DeepInspectionConfiguration
```
default UpdateEc2DeepInspectionConfigurationResponse updateEc2DeepInspectionConfiguration(Consumer<UpdateEc2DeepInspectionConfigurationRequest.Builder> updateEc2DeepInspectionConfigurationRequest)
                                                                                   throws ValidationException,
                                                                                          AccessDeniedException,
                                                                                          ThrottlingException,
                                                                                          InternalServerException,
                                                                                          AwsServiceException,
                                                                                          SdkClientException,
                                                                                          Inspector2Exception
```
    Activates, deactivates Amazon Inspector deep inspection, or updates custom paths for your account.
    
    This is a convenience which creates an instance of the UpdateEc2DeepInspectionConfigurationRequest.Builder avoiding the need to create one manually via UpdateEc2DeepInspectionConfigurationRequest.builder()
    
    Parameters:
    
    updateEc2DeepInspectionConfigurationRequest - A Consumer that will call methods on UpdateEc2DeepInspectionConfigurationRequest.Builder to create a request.
    
    Returns:
    
    Result of the UpdateEc2DeepInspectionConfiguration operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateEncryptionKey
```
default UpdateEncryptionKeyResponse updateEncryptionKey(UpdateEncryptionKeyRequest updateEncryptionKeyRequest)
                                                 throws ValidationException,
                                                        AccessDeniedException,
                                                        ThrottlingException,
                                                        ResourceNotFoundException,
                                                        InternalServerException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        Inspector2Exception
```
    Updates an encryption key. A ResourceNotFoundException means that an Amazon Web Services owned key is being used for encryption.
    
    Parameters:
    
    updateEncryptionKeyRequest -
    
    Returns:
    
    Result of the UpdateEncryptionKey operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateEncryptionKey
```
default UpdateEncryptionKeyResponse updateEncryptionKey(Consumer<UpdateEncryptionKeyRequest.Builder> updateEncryptionKeyRequest)
                                                 throws ValidationException,
                                                        AccessDeniedException,
                                                        ThrottlingException,
                                                        ResourceNotFoundException,
                                                        InternalServerException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        Inspector2Exception
```
    Updates an encryption key. A ResourceNotFoundException means that an Amazon Web Services owned key is being used for encryption.
    
    This is a convenience which creates an instance of the UpdateEncryptionKeyRequest.Builder avoiding the need to create one manually via UpdateEncryptionKeyRequest.builder()
    
    Parameters:
    
    updateEncryptionKeyRequest - A Consumer that will call methods on UpdateEncryptionKeyRequest.Builder to create a request.
    
    Returns:
    
    Result of the UpdateEncryptionKey operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateFilter
```
default UpdateFilterResponse updateFilter(UpdateFilterRequest updateFilterRequest)
                                   throws ValidationException,
                                          AccessDeniedException,
                                          ResourceNotFoundException,
                                          ThrottlingException,
                                          InternalServerException,
                                          AwsServiceException,
                                          SdkClientException,
                                          Inspector2Exception
```
    Specifies the action that is to be applied to the findings that match the filter.
    
    Parameters:
    
    updateFilterRequest -
    
    Returns:
    
    Result of the UpdateFilter operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateFilter
```
default UpdateFilterResponse updateFilter(Consumer<UpdateFilterRequest.Builder> updateFilterRequest)
                                   throws ValidationException,
                                          AccessDeniedException,
                                          ResourceNotFoundException,
                                          ThrottlingException,
                                          InternalServerException,
                                          AwsServiceException,
                                          SdkClientException,
                                          Inspector2Exception
```
    Specifies the action that is to be applied to the findings that match the filter.
    
    This is a convenience which creates an instance of the UpdateFilterRequest.Builder avoiding the need to create one manually via UpdateFilterRequest.builder()
    
    Parameters:
    
    updateFilterRequest - A Consumer that will call methods on UpdateFilterRequest.Builder to create a request.
    
    Returns:
    
    Result of the UpdateFilter operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - The operation tried to access an invalid resource. Make sure the resource is specified correctly.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateOrgEc2DeepInspectionConfiguration
```
default UpdateOrgEc2DeepInspectionConfigurationResponse updateOrgEc2DeepInspectionConfiguration(UpdateOrgEc2DeepInspectionConfigurationRequest updateOrgEc2DeepInspectionConfigurationRequest)
                                                                                         throws ValidationException,
                                                                                                AccessDeniedException,
                                                                                                ThrottlingException,
                                                                                                InternalServerException,
                                                                                                AwsServiceException,
                                                                                                SdkClientException,
                                                                                                Inspector2Exception
```
    Updates the Amazon Inspector deep inspection custom paths for your organization. You must be an Amazon Inspector delegated administrator to use this API.
    
    Parameters:
    
    updateOrgEc2DeepInspectionConfigurationRequest -
    
    Returns:
    
    Result of the UpdateOrgEc2DeepInspectionConfiguration operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateOrgEc2DeepInspectionConfiguration
```
default UpdateOrgEc2DeepInspectionConfigurationResponse updateOrgEc2DeepInspectionConfiguration(Consumer<UpdateOrgEc2DeepInspectionConfigurationRequest.Builder> updateOrgEc2DeepInspectionConfigurationRequest)
                                                                                         throws ValidationException,
                                                                                                AccessDeniedException,
                                                                                                ThrottlingException,
                                                                                                InternalServerException,
                                                                                                AwsServiceException,
                                                                                                SdkClientException,
                                                                                                Inspector2Exception
```
    Updates the Amazon Inspector deep inspection custom paths for your organization. You must be an Amazon Inspector delegated administrator to use this API.
    
    This is a convenience which creates an instance of the UpdateOrgEc2DeepInspectionConfigurationRequest.Builder avoiding the need to create one manually via UpdateOrgEc2DeepInspectionConfigurationRequest.builder()
    
    Parameters:
    
    updateOrgEc2DeepInspectionConfigurationRequest - A Consumer that will call methods on UpdateOrgEc2DeepInspectionConfigurationRequest.Builder to create a request.
    
    Returns:
    
    Result of the UpdateOrgEc2DeepInspectionConfiguration operation returned by the service.
    
    Throws:
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateOrganizationConfiguration
```
default UpdateOrganizationConfigurationResponse updateOrganizationConfiguration(UpdateOrganizationConfigurationRequest updateOrganizationConfigurationRequest)
                                                                         throws AccessDeniedException,
                                                                                ValidationException,
                                                                                ThrottlingException,
                                                                                InternalServerException,
                                                                                AwsServiceException,
                                                                                SdkClientException,
                                                                                Inspector2Exception
```
    Updates the configurations for your Amazon Inspector organization.
    
    Parameters:
    
    updateOrganizationConfigurationRequest -
    
    Returns:
    
    Result of the UpdateOrganizationConfiguration operation returned by the service.
    
    Throws:
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateOrganizationConfiguration
```
default UpdateOrganizationConfigurationResponse updateOrganizationConfiguration(Consumer<UpdateOrganizationConfigurationRequest.Builder> updateOrganizationConfigurationRequest)
                                                                         throws AccessDeniedException,
                                                                                ValidationException,
                                                                                ThrottlingException,
                                                                                InternalServerException,
                                                                                AwsServiceException,
                                                                                SdkClientException,
                                                                                Inspector2Exception
```
    Updates the configurations for your Amazon Inspector organization.
    
    This is a convenience which creates an instance of the UpdateOrganizationConfigurationRequest.Builder avoiding the need to create one manually via UpdateOrganizationConfigurationRequest.builder()
    
    Parameters:
    
    updateOrganizationConfigurationRequest - A Consumer that will call methods on UpdateOrganizationConfigurationRequest.Builder to create a request.
    
    Returns:
    
    Result of the UpdateOrganizationConfiguration operation returned by the service.
    
    Throws:
    
    AccessDeniedException - You do not have sufficient access to perform this action.
    
    ValidationException - The request has failed validation due to missing required fields or having invalid inputs.
    
    ThrottlingException - The limit on the number of requests per second was exceeded.
    
    InternalServerException - The request has failed due to an internal failure of the Amazon Inspector service.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Inspector2Exception - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - create
```
static Inspector2Client create()
```
    Create a Inspector2Client with the region loaded from the DefaultAwsRegionProviderChain and credentials loaded from the DefaultCredentialsProvider.
  - builder
```
static Inspector2ClientBuilder builder()
```
    Create a builder that can be used to configure and create a Inspector2Client.
  - serviceMetadata
```
static ServiceMetadata serviceMetadata()
```
  - serviceClientConfiguration
```
default Inspector2ServiceClientConfiguration serviceClientConfiguration()
```
    Specified by:
    
    serviceClientConfiguration in interface AwsClient
    
    Specified by:
    
    serviceClientConfiguration in interface SdkClient

Modifier and Type	Field	Description
`static String`	`SERVICE_METADATA_ID`	Value for looking up the service's metadata from the `ServiceMetadataProvider`.
`static String`	`SERVICE_NAME`

Interface Inspector2Client

Field Summary

Method Summary

Methods inherited from interface software.amazon.awssdk.utils.SdkAutoCloseable

Methods inherited from interface software.amazon.awssdk.core.SdkClient

Field Detail

SERVICE_NAME

SERVICE_METADATA_ID

Method Detail

associateMember

associateMember

batchGetAccountStatus

batchGetAccountStatus

batchGetCodeSnippet

batchGetCodeSnippet

batchGetFindingDetails

batchGetFindingDetails

batchGetFreeTrialInfo

batchGetFreeTrialInfo

batchGetMemberEc2DeepInspectionStatus

batchGetMemberEc2DeepInspectionStatus

batchUpdateMemberEc2DeepInspectionStatus

batchUpdateMemberEc2DeepInspectionStatus

cancelFindingsReport

cancelFindingsReport

cancelSbomExport

cancelSbomExport

createCisScanConfiguration

createCisScanConfiguration

createFilter

createFilter

createFindingsReport

createFindingsReport

createSbomExport

createSbomExport

deleteCisScanConfiguration

deleteCisScanConfiguration

deleteFilter

deleteFilter

describeOrganizationConfiguration

describeOrganizationConfiguration

disable

disable

disableDelegatedAdminAccount

disableDelegatedAdminAccount

disassociateMember

disassociateMember

enable

enable

enableDelegatedAdminAccount

enableDelegatedAdminAccount

getCisScanReport

getCisScanReport

getCisScanResultDetails

getCisScanResultDetails

getCisScanResultDetailsPaginator

getCisScanResultDetailsPaginator

getConfiguration

getConfiguration

getDelegatedAdminAccount

getDelegatedAdminAccount

getEc2DeepInspectionConfiguration

getEc2DeepInspectionConfiguration

getEncryptionKey

getEncryptionKey

getFindingsReportStatus

getFindingsReportStatus

getMember

getMember

getSbomExport

getSbomExport

listAccountPermissions

listAccountPermissions

listAccountPermissionsPaginator

listAccountPermissionsPaginator

listCisScanConfigurations

listCisScanConfigurations

listCisScanConfigurationsPaginator

listCisScanConfigurationsPaginator

listCisScanResultsAggregatedByChecks