@Generated(value="software.amazon.awssdk:codegen") @ThreadSafe public interface InternetMonitorAsyncClient extends AwsClient
builder() method.
Amazon CloudWatch Internet Monitor provides visibility into how internet issues impact the performance and availability between your applications hosted on Amazon Web Services and your end users. It can reduce the time it takes for you to diagnose internet issues from days to minutes. Internet Monitor uses the connectivity data that Amazon Web Services captures from its global networking footprint to calculate a baseline of performance and availability for internet traffic. This is the same data that Amazon Web Services uses to monitor internet uptime and availability. With those measurements as a baseline, Internet Monitor raises awareness for you when there are significant problems for your end users in the different geographic locations where your application runs.
Internet Monitor publishes internet measurements to CloudWatch Logs and CloudWatch Metrics, to easily support using CloudWatch tools with health information for geographies and networks specific to your application. Internet Monitor sends health events to Amazon EventBridge so that you can set up notifications. If an issue is caused by the Amazon Web Services network, you also automatically receive an Amazon Web Services Health Dashboard notification with the steps that Amazon Web Services is taking to mitigate the problem.
To use Internet Monitor, you create a monitor and associate your application's resources with it - VPCs, NLBs, CloudFront distributions, or WorkSpaces directories - so Internet Monitor can determine where your application's internet traffic is. Internet Monitor then provides internet measurements from Amazon Web Services that are specific to the locations and ASNs (typically, internet service providers or ISPs) that communicate with your application.
For more information, see Using Amazon CloudWatch Internet Monitor in the Amazon CloudWatch User Guide.
| Modifier and Type | Field and Description |
|---|---|
static String |
SERVICE_METADATA_ID
Value for looking up the service's metadata from the
ServiceMetadataProvider. |
static String |
SERVICE_NAME |
| Modifier and Type | Method and Description |
|---|---|
static InternetMonitorAsyncClientBuilder |
builder()
Create a builder that can be used to configure and create a
InternetMonitorAsyncClient. |
static InternetMonitorAsyncClient |
create()
Create a
InternetMonitorAsyncClient with the region loaded from the
DefaultAwsRegionProviderChain and credentials loaded from the
DefaultCredentialsProvider. |
default CompletableFuture<CreateMonitorResponse> |
createMonitor(Consumer<CreateMonitorRequest.Builder> createMonitorRequest)
Creates a monitor in Amazon CloudWatch Internet Monitor.
|
default CompletableFuture<CreateMonitorResponse> |
createMonitor(CreateMonitorRequest createMonitorRequest)
Creates a monitor in Amazon CloudWatch Internet Monitor.
|
default CompletableFuture<DeleteMonitorResponse> |
deleteMonitor(Consumer<DeleteMonitorRequest.Builder> deleteMonitorRequest)
Deletes a monitor in Amazon CloudWatch Internet Monitor.
|
default CompletableFuture<DeleteMonitorResponse> |
deleteMonitor(DeleteMonitorRequest deleteMonitorRequest)
Deletes a monitor in Amazon CloudWatch Internet Monitor.
|
default CompletableFuture<GetHealthEventResponse> |
getHealthEvent(Consumer<GetHealthEventRequest.Builder> getHealthEventRequest)
Gets information the Amazon CloudWatch Internet Monitor has created and stored about a health event for a
specified monitor.
|
default CompletableFuture<GetHealthEventResponse> |
getHealthEvent(GetHealthEventRequest getHealthEventRequest)
Gets information the Amazon CloudWatch Internet Monitor has created and stored about a health event for a
specified monitor.
|
default CompletableFuture<GetMonitorResponse> |
getMonitor(Consumer<GetMonitorRequest.Builder> getMonitorRequest)
Gets information about a monitor in Amazon CloudWatch Internet Monitor based on a monitor name.
|
default CompletableFuture<GetMonitorResponse> |
getMonitor(GetMonitorRequest getMonitorRequest)
Gets information about a monitor in Amazon CloudWatch Internet Monitor based on a monitor name.
|
default CompletableFuture<ListHealthEventsResponse> |
listHealthEvents(Consumer<ListHealthEventsRequest.Builder> listHealthEventsRequest)
Lists all health events for a monitor in Amazon CloudWatch Internet Monitor.
|
default CompletableFuture<ListHealthEventsResponse> |
listHealthEvents(ListHealthEventsRequest listHealthEventsRequest)
Lists all health events for a monitor in Amazon CloudWatch Internet Monitor.
|
default ListHealthEventsPublisher |
listHealthEventsPaginator(Consumer<ListHealthEventsRequest.Builder> listHealthEventsRequest)
Lists all health events for a monitor in Amazon CloudWatch Internet Monitor.
|
default ListHealthEventsPublisher |
listHealthEventsPaginator(ListHealthEventsRequest listHealthEventsRequest)
Lists all health events for a monitor in Amazon CloudWatch Internet Monitor.
|
default CompletableFuture<ListMonitorsResponse> |
listMonitors(Consumer<ListMonitorsRequest.Builder> listMonitorsRequest)
Lists all of your monitors for Amazon CloudWatch Internet Monitor and their statuses, along with the Amazon
Resource Name (ARN) and name of each monitor.
|
default CompletableFuture<ListMonitorsResponse> |
listMonitors(ListMonitorsRequest listMonitorsRequest)
Lists all of your monitors for Amazon CloudWatch Internet Monitor and their statuses, along with the Amazon
Resource Name (ARN) and name of each monitor.
|
default ListMonitorsPublisher |
listMonitorsPaginator(Consumer<ListMonitorsRequest.Builder> listMonitorsRequest)
Lists all of your monitors for Amazon CloudWatch Internet Monitor and their statuses, along with the Amazon
Resource Name (ARN) and name of each monitor.
|
default ListMonitorsPublisher |
listMonitorsPaginator(ListMonitorsRequest listMonitorsRequest)
Lists all of your monitors for Amazon CloudWatch Internet Monitor and their statuses, along with the Amazon
Resource Name (ARN) and name of each monitor.
|
default CompletableFuture<ListTagsForResourceResponse> |
listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)
Lists the tags for a resource.
|
default CompletableFuture<ListTagsForResourceResponse> |
listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)
Lists the tags for a resource.
|
default InternetMonitorServiceClientConfiguration |
serviceClientConfiguration() |
default CompletableFuture<TagResourceResponse> |
tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)
Adds a tag to a resource.
|
default CompletableFuture<TagResourceResponse> |
tagResource(TagResourceRequest tagResourceRequest)
Adds a tag to a resource.
|
default CompletableFuture<UntagResourceResponse> |
untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)
Removes a tag from a resource.
|
default CompletableFuture<UntagResourceResponse> |
untagResource(UntagResourceRequest untagResourceRequest)
Removes a tag from a resource.
|
default CompletableFuture<UpdateMonitorResponse> |
updateMonitor(Consumer<UpdateMonitorRequest.Builder> updateMonitorRequest)
Updates a monitor.
|
default CompletableFuture<UpdateMonitorResponse> |
updateMonitor(UpdateMonitorRequest updateMonitorRequest)
Updates a monitor.
|
serviceNameclosestatic final String SERVICE_NAME
static final String SERVICE_METADATA_ID
ServiceMetadataProvider.default CompletableFuture<CreateMonitorResponse> createMonitor(CreateMonitorRequest createMonitorRequest)
Creates a monitor in Amazon CloudWatch Internet Monitor. A monitor is built based on information from the application resources that you add: VPCs, Network Load Balancers (NLBs), Amazon CloudFront distributions, and Amazon WorkSpaces directories. Internet Monitor then publishes internet measurements from Amazon Web Services that are specific to the city-networks. That is, the locations and ASNs (typically internet service providers or ISPs), where clients access your application. For more information, see Using Amazon CloudWatch Internet Monitor in the Amazon CloudWatch User Guide.
When you create a monitor, you choose the percentage of traffic that you want to monitor. You can also set a maximum limit for the number of city-networks where client traffic is monitored, that caps the total traffic that Internet Monitor monitors. A city-network maximum is the limit of city-networks, but you only pay for the number of city-networks that are actually monitored. You can update your monitor at any time to change the percentage of traffic to monitor or the city-networks maximum. For more information, see Choosing a city-network maximum value in the Amazon CloudWatch User Guide.
createMonitorRequest - default CompletableFuture<CreateMonitorResponse> createMonitor(Consumer<CreateMonitorRequest.Builder> createMonitorRequest)
Creates a monitor in Amazon CloudWatch Internet Monitor. A monitor is built based on information from the application resources that you add: VPCs, Network Load Balancers (NLBs), Amazon CloudFront distributions, and Amazon WorkSpaces directories. Internet Monitor then publishes internet measurements from Amazon Web Services that are specific to the city-networks. That is, the locations and ASNs (typically internet service providers or ISPs), where clients access your application. For more information, see Using Amazon CloudWatch Internet Monitor in the Amazon CloudWatch User Guide.
When you create a monitor, you choose the percentage of traffic that you want to monitor. You can also set a maximum limit for the number of city-networks where client traffic is monitored, that caps the total traffic that Internet Monitor monitors. A city-network maximum is the limit of city-networks, but you only pay for the number of city-networks that are actually monitored. You can update your monitor at any time to change the percentage of traffic to monitor or the city-networks maximum. For more information, see Choosing a city-network maximum value in the Amazon CloudWatch User Guide.
This is a convenience which creates an instance of the CreateMonitorRequest.Builder avoiding the need to
create one manually via CreateMonitorRequest.builder()
createMonitorRequest - A Consumer that will call methods on
CreateMonitorRequest.Builder to create a
request.default CompletableFuture<DeleteMonitorResponse> deleteMonitor(DeleteMonitorRequest deleteMonitorRequest)
Deletes a monitor in Amazon CloudWatch Internet Monitor.
deleteMonitorRequest - default CompletableFuture<DeleteMonitorResponse> deleteMonitor(Consumer<DeleteMonitorRequest.Builder> deleteMonitorRequest)
Deletes a monitor in Amazon CloudWatch Internet Monitor.
This is a convenience which creates an instance of the DeleteMonitorRequest.Builder avoiding the need to
create one manually via DeleteMonitorRequest.builder()
deleteMonitorRequest - A Consumer that will call methods on
DeleteMonitorRequest.Builder to create a
request.default CompletableFuture<GetHealthEventResponse> getHealthEvent(GetHealthEventRequest getHealthEventRequest)
Gets information the Amazon CloudWatch Internet Monitor has created and stored about a health event for a specified monitor. This information includes the impacted locations, and all the information related to the event, by location.
The information returned includes the impact on performance, availability, and round-trip time, information about the network providers (ASNs), the event type, and so on.
Information rolled up at the global traffic level is also returned, including the impact type and total traffic impact.
getHealthEventRequest - default CompletableFuture<GetHealthEventResponse> getHealthEvent(Consumer<GetHealthEventRequest.Builder> getHealthEventRequest)
Gets information the Amazon CloudWatch Internet Monitor has created and stored about a health event for a specified monitor. This information includes the impacted locations, and all the information related to the event, by location.
The information returned includes the impact on performance, availability, and round-trip time, information about the network providers (ASNs), the event type, and so on.
Information rolled up at the global traffic level is also returned, including the impact type and total traffic impact.
This is a convenience which creates an instance of the GetHealthEventRequest.Builder avoiding the need to
create one manually via GetHealthEventRequest.builder()
getHealthEventRequest - A Consumer that will call methods on
GetHealthEventRequest.Builder to create a
request.default CompletableFuture<GetMonitorResponse> getMonitor(GetMonitorRequest getMonitorRequest)
Gets information about a monitor in Amazon CloudWatch Internet Monitor based on a monitor name. The information returned includes the Amazon Resource Name (ARN), create time, modified time, resources included in the monitor, and status information.
getMonitorRequest - default CompletableFuture<GetMonitorResponse> getMonitor(Consumer<GetMonitorRequest.Builder> getMonitorRequest)
Gets information about a monitor in Amazon CloudWatch Internet Monitor based on a monitor name. The information returned includes the Amazon Resource Name (ARN), create time, modified time, resources included in the monitor, and status information.
This is a convenience which creates an instance of the GetMonitorRequest.Builder avoiding the need to
create one manually via GetMonitorRequest.builder()
getMonitorRequest - A Consumer that will call methods on
GetMonitorRequest.Builder to create a
request.default CompletableFuture<ListHealthEventsResponse> listHealthEvents(ListHealthEventsRequest listHealthEventsRequest)
Lists all health events for a monitor in Amazon CloudWatch Internet Monitor. Returns information for health events including the event start and end time and the status.
Health events that have start times during the time frame that is requested are not included in the list of health events.
listHealthEventsRequest - default CompletableFuture<ListHealthEventsResponse> listHealthEvents(Consumer<ListHealthEventsRequest.Builder> listHealthEventsRequest)
Lists all health events for a monitor in Amazon CloudWatch Internet Monitor. Returns information for health events including the event start and end time and the status.
Health events that have start times during the time frame that is requested are not included in the list of health events.
This is a convenience which creates an instance of the ListHealthEventsRequest.Builder avoiding the need
to create one manually via ListHealthEventsRequest.builder()
listHealthEventsRequest - A Consumer that will call methods on
ListHealthEventsRequest.Builder to create a
request.default ListHealthEventsPublisher listHealthEventsPaginator(ListHealthEventsRequest listHealthEventsRequest)
Lists all health events for a monitor in Amazon CloudWatch Internet Monitor. Returns information for health events including the event start and end time and the status.
Health events that have start times during the time frame that is requested are not included in the list of health events.
This is a variant of
listHealthEvents(software.amazon.awssdk.services.internetmonitor.model.ListHealthEventsRequest)
operation. The return type is a custom publisher that can be subscribed to request a stream of response pages.
SDK will internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.internetmonitor.paginators.ListHealthEventsPublisher publisher = client.listHealthEventsPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.internetmonitor.paginators.ListHealthEventsPublisher publisher = client.listHealthEventsPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.internetmonitor.model.ListHealthEventsResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.internetmonitor.model.ListHealthEventsResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listHealthEvents(software.amazon.awssdk.services.internetmonitor.model.ListHealthEventsRequest)
operation.
listHealthEventsRequest - default ListHealthEventsPublisher listHealthEventsPaginator(Consumer<ListHealthEventsRequest.Builder> listHealthEventsRequest)
Lists all health events for a monitor in Amazon CloudWatch Internet Monitor. Returns information for health events including the event start and end time and the status.
Health events that have start times during the time frame that is requested are not included in the list of health events.
This is a variant of
listHealthEvents(software.amazon.awssdk.services.internetmonitor.model.ListHealthEventsRequest)
operation. The return type is a custom publisher that can be subscribed to request a stream of response pages.
SDK will internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.internetmonitor.paginators.ListHealthEventsPublisher publisher = client.listHealthEventsPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.internetmonitor.paginators.ListHealthEventsPublisher publisher = client.listHealthEventsPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.internetmonitor.model.ListHealthEventsResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.internetmonitor.model.ListHealthEventsResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listHealthEvents(software.amazon.awssdk.services.internetmonitor.model.ListHealthEventsRequest)
operation.
This is a convenience which creates an instance of the ListHealthEventsRequest.Builder avoiding the need
to create one manually via ListHealthEventsRequest.builder()
listHealthEventsRequest - A Consumer that will call methods on
ListHealthEventsRequest.Builder to create a
request.default CompletableFuture<ListMonitorsResponse> listMonitors(ListMonitorsRequest listMonitorsRequest)
Lists all of your monitors for Amazon CloudWatch Internet Monitor and their statuses, along with the Amazon Resource Name (ARN) and name of each monitor.
listMonitorsRequest - default CompletableFuture<ListMonitorsResponse> listMonitors(Consumer<ListMonitorsRequest.Builder> listMonitorsRequest)
Lists all of your monitors for Amazon CloudWatch Internet Monitor and their statuses, along with the Amazon Resource Name (ARN) and name of each monitor.
This is a convenience which creates an instance of the ListMonitorsRequest.Builder avoiding the need to
create one manually via ListMonitorsRequest.builder()
listMonitorsRequest - A Consumer that will call methods on
ListMonitorsRequest.Builder to create a
request.default ListMonitorsPublisher listMonitorsPaginator(ListMonitorsRequest listMonitorsRequest)
Lists all of your monitors for Amazon CloudWatch Internet Monitor and their statuses, along with the Amazon Resource Name (ARN) and name of each monitor.
This is a variant of
listMonitors(software.amazon.awssdk.services.internetmonitor.model.ListMonitorsRequest) operation. The
return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will
internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.internetmonitor.paginators.ListMonitorsPublisher publisher = client.listMonitorsPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.internetmonitor.paginators.ListMonitorsPublisher publisher = client.listMonitorsPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.internetmonitor.model.ListMonitorsResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.internetmonitor.model.ListMonitorsResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listMonitors(software.amazon.awssdk.services.internetmonitor.model.ListMonitorsRequest) operation.
listMonitorsRequest - default ListMonitorsPublisher listMonitorsPaginator(Consumer<ListMonitorsRequest.Builder> listMonitorsRequest)
Lists all of your monitors for Amazon CloudWatch Internet Monitor and their statuses, along with the Amazon Resource Name (ARN) and name of each monitor.
This is a variant of
listMonitors(software.amazon.awssdk.services.internetmonitor.model.ListMonitorsRequest) operation. The
return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will
internally handle making service calls for you.
When the operation is called, an instance of this class is returned. At this point, no service calls are made yet
and so there is no guarantee that the request is valid. If there are errors in your request, you will see the
failures only after you start streaming the data. The subscribe method should be called as a request to start
streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe
method will result in a new Subscription i.e., a new contract to stream data from the
starting request.
The following are few ways to use the response class:
1) Using the subscribe helper method
software.amazon.awssdk.services.internetmonitor.paginators.ListMonitorsPublisher publisher = client.listMonitorsPaginator(request);
CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
future.get();
2) Using a custom subscriber
software.amazon.awssdk.services.internetmonitor.paginators.ListMonitorsPublisher publisher = client.listMonitorsPaginator(request);
publisher.subscribe(new Subscriber<software.amazon.awssdk.services.internetmonitor.model.ListMonitorsResponse>() {
public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
public void onNext(software.amazon.awssdk.services.internetmonitor.model.ListMonitorsResponse response) { //... };
});
As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.
Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listMonitors(software.amazon.awssdk.services.internetmonitor.model.ListMonitorsRequest) operation.
This is a convenience which creates an instance of the ListMonitorsRequest.Builder avoiding the need to
create one manually via ListMonitorsRequest.builder()
listMonitorsRequest - A Consumer that will call methods on
ListMonitorsRequest.Builder to create a
request.default CompletableFuture<ListTagsForResourceResponse> listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)
Lists the tags for a resource. Tags are supported only for monitors in Amazon CloudWatch Internet Monitor.
listTagsForResourceRequest - default CompletableFuture<ListTagsForResourceResponse> listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)
Lists the tags for a resource. Tags are supported only for monitors in Amazon CloudWatch Internet Monitor.
This is a convenience which creates an instance of the ListTagsForResourceRequest.Builder avoiding the
need to create one manually via ListTagsForResourceRequest.builder()
listTagsForResourceRequest - A Consumer that will call methods on
ListTagsForResourceRequest.Builder to create
a request.default CompletableFuture<TagResourceResponse> tagResource(TagResourceRequest tagResourceRequest)
Adds a tag to a resource. Tags are supported only for monitors in Amazon CloudWatch Internet Monitor. You can add a maximum of 50 tags in Internet Monitor.
A minimum of one tag is required for this call. It returns an error if you use the TagResource
request with 0 tags.
tagResourceRequest - default CompletableFuture<TagResourceResponse> tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)
Adds a tag to a resource. Tags are supported only for monitors in Amazon CloudWatch Internet Monitor. You can add a maximum of 50 tags in Internet Monitor.
A minimum of one tag is required for this call. It returns an error if you use the TagResource
request with 0 tags.
This is a convenience which creates an instance of the TagResourceRequest.Builder avoiding the need to
create one manually via TagResourceRequest.builder()
tagResourceRequest - A Consumer that will call methods on
TagResourceRequest.Builder to create a
request.default CompletableFuture<UntagResourceResponse> untagResource(UntagResourceRequest untagResourceRequest)
Removes a tag from a resource.
untagResourceRequest - default CompletableFuture<UntagResourceResponse> untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)
Removes a tag from a resource.
This is a convenience which creates an instance of the UntagResourceRequest.Builder avoiding the need to
create one manually via UntagResourceRequest.builder()
untagResourceRequest - A Consumer that will call methods on
UntagResourceRequest.Builder to create a
request.default CompletableFuture<UpdateMonitorResponse> updateMonitor(UpdateMonitorRequest updateMonitorRequest)
Updates a monitor. You can update a monitor to change the percentage of traffic to monitor or the maximum number of city-networks (locations and ASNs), to add or remove resources, or to change the status of the monitor. Note that you can't change the name of a monitor.
The city-network maximum that you choose is the limit, but you only pay for the number of city-networks that are actually monitored. For more information, see Choosing a city-network maximum value in the Amazon CloudWatch User Guide.
updateMonitorRequest - default CompletableFuture<UpdateMonitorResponse> updateMonitor(Consumer<UpdateMonitorRequest.Builder> updateMonitorRequest)
Updates a monitor. You can update a monitor to change the percentage of traffic to monitor or the maximum number of city-networks (locations and ASNs), to add or remove resources, or to change the status of the monitor. Note that you can't change the name of a monitor.
The city-network maximum that you choose is the limit, but you only pay for the number of city-networks that are actually monitored. For more information, see Choosing a city-network maximum value in the Amazon CloudWatch User Guide.
This is a convenience which creates an instance of the UpdateMonitorRequest.Builder avoiding the need to
create one manually via UpdateMonitorRequest.builder()
updateMonitorRequest - A Consumer that will call methods on
UpdateMonitorRequest.Builder to create a
request.default InternetMonitorServiceClientConfiguration serviceClientConfiguration()
serviceClientConfiguration in interface AwsClientserviceClientConfiguration in interface SdkClientstatic InternetMonitorAsyncClient create()
InternetMonitorAsyncClient with the region loaded from the
DefaultAwsRegionProviderChain and credentials loaded from the
DefaultCredentialsProvider.static InternetMonitorAsyncClientBuilder builder()
InternetMonitorAsyncClient.Copyright © 2023. All rights reserved.