public static interface GetInterpolatedAssetPropertyValuesRequest.Builder extends IoTSiteWiseRequest.Builder, SdkPojo, CopyableBuilder<GetInterpolatedAssetPropertyValuesRequest.Builder,GetInterpolatedAssetPropertyValuesRequest>
| Modifier and Type | Method and Description |
|---|---|
GetInterpolatedAssetPropertyValuesRequest.Builder |
assetId(String assetId)
The ID of the asset.
|
GetInterpolatedAssetPropertyValuesRequest.Builder |
endTimeInSeconds(Long endTimeInSeconds)
The inclusive end of the range from which to interpolate data, expressed in seconds in Unix epoch time.
|
GetInterpolatedAssetPropertyValuesRequest.Builder |
endTimeOffsetInNanos(Integer endTimeOffsetInNanos)
The nanosecond offset converted from
endTimeInSeconds. |
GetInterpolatedAssetPropertyValuesRequest.Builder |
intervalInSeconds(Long intervalInSeconds)
The time interval in seconds over which to interpolate data.
|
GetInterpolatedAssetPropertyValuesRequest.Builder |
intervalWindowInSeconds(Long intervalWindowInSeconds)
The query interval for the window, in seconds.
|
GetInterpolatedAssetPropertyValuesRequest.Builder |
maxResults(Integer maxResults)
The maximum number of results to return for each paginated request.
|
GetInterpolatedAssetPropertyValuesRequest.Builder |
nextToken(String nextToken)
The token to be used for the next set of paginated results.
|
GetInterpolatedAssetPropertyValuesRequest.Builder |
overrideConfiguration(AwsRequestOverrideConfiguration overrideConfiguration) |
GetInterpolatedAssetPropertyValuesRequest.Builder |
overrideConfiguration(Consumer<AwsRequestOverrideConfiguration.Builder> builderConsumer) |
GetInterpolatedAssetPropertyValuesRequest.Builder |
propertyAlias(String propertyAlias)
The alias that identifies the property, such as an OPC-UA server data stream path (for example,
/company/windfarm/3/turbine/7/temperature). |
GetInterpolatedAssetPropertyValuesRequest.Builder |
propertyId(String propertyId)
The ID of the asset property.
|
GetInterpolatedAssetPropertyValuesRequest.Builder |
quality(Quality quality)
The quality of the asset property value.
|
GetInterpolatedAssetPropertyValuesRequest.Builder |
quality(String quality)
The quality of the asset property value.
|
GetInterpolatedAssetPropertyValuesRequest.Builder |
startTimeInSeconds(Long startTimeInSeconds)
The exclusive start of the range from which to interpolate data, expressed in seconds in Unix epoch time.
|
GetInterpolatedAssetPropertyValuesRequest.Builder |
startTimeOffsetInNanos(Integer startTimeOffsetInNanos)
The nanosecond offset converted from
startTimeInSeconds. |
GetInterpolatedAssetPropertyValuesRequest.Builder |
type(String type)
The interpolation type.
|
buildoverrideConfigurationequalsBySdkFields, sdkFieldscopyapplyMutation, buildGetInterpolatedAssetPropertyValuesRequest.Builder assetId(String assetId)
The ID of the asset.
assetId - The ID of the asset.GetInterpolatedAssetPropertyValuesRequest.Builder propertyId(String propertyId)
The ID of the asset property.
propertyId - The ID of the asset property.GetInterpolatedAssetPropertyValuesRequest.Builder propertyAlias(String propertyAlias)
The alias that identifies the property, such as an OPC-UA server data stream path (for example,
/company/windfarm/3/turbine/7/temperature). For more information, see Mapping industrial
data streams to asset properties in the IoT SiteWise User Guide.
propertyAlias - The alias that identifies the property, such as an OPC-UA server data stream path (for example,
/company/windfarm/3/turbine/7/temperature). For more information, see Mapping
industrial data streams to asset properties in the IoT SiteWise User Guide.GetInterpolatedAssetPropertyValuesRequest.Builder startTimeInSeconds(Long startTimeInSeconds)
The exclusive start of the range from which to interpolate data, expressed in seconds in Unix epoch time.
startTimeInSeconds - The exclusive start of the range from which to interpolate data, expressed in seconds in Unix epoch
time.GetInterpolatedAssetPropertyValuesRequest.Builder startTimeOffsetInNanos(Integer startTimeOffsetInNanos)
The nanosecond offset converted from startTimeInSeconds.
startTimeOffsetInNanos - The nanosecond offset converted from startTimeInSeconds.GetInterpolatedAssetPropertyValuesRequest.Builder endTimeInSeconds(Long endTimeInSeconds)
The inclusive end of the range from which to interpolate data, expressed in seconds in Unix epoch time.
endTimeInSeconds - The inclusive end of the range from which to interpolate data, expressed in seconds in Unix epoch
time.GetInterpolatedAssetPropertyValuesRequest.Builder endTimeOffsetInNanos(Integer endTimeOffsetInNanos)
The nanosecond offset converted from endTimeInSeconds.
endTimeOffsetInNanos - The nanosecond offset converted from endTimeInSeconds.GetInterpolatedAssetPropertyValuesRequest.Builder quality(String quality)
The quality of the asset property value. You can use this parameter as a filter to choose only the asset property values that have a specific quality.
GetInterpolatedAssetPropertyValuesRequest.Builder quality(Quality quality)
The quality of the asset property value. You can use this parameter as a filter to choose only the asset property values that have a specific quality.
GetInterpolatedAssetPropertyValuesRequest.Builder intervalInSeconds(Long intervalInSeconds)
The time interval in seconds over which to interpolate data. Each interval starts when the previous one ends.
intervalInSeconds - The time interval in seconds over which to interpolate data. Each interval starts when the previous
one ends.GetInterpolatedAssetPropertyValuesRequest.Builder nextToken(String nextToken)
The token to be used for the next set of paginated results.
nextToken - The token to be used for the next set of paginated results.GetInterpolatedAssetPropertyValuesRequest.Builder maxResults(Integer maxResults)
The maximum number of results to return for each paginated request. If not specified, the default value is 10.
maxResults - The maximum number of results to return for each paginated request. If not specified, the default
value is 10.GetInterpolatedAssetPropertyValuesRequest.Builder type(String type)
The interpolation type.
Valid values: LINEAR_INTERPOLATION | LOCF_INTERPOLATION
LINEAR_INTERPOLATION – Estimates missing data using linear interpolation.
For example, you can use this operation to return the interpolated temperature values for a wind turbine every 24 hours over a duration of 7 days. If the interpolation starts July 1, 2021, at 9 AM, IoT SiteWise returns the first interpolated value on July 2, 2021, at 9 AM, the second interpolated value on July 3, 2021, at 9 AM, and so on.
LOCF_INTERPOLATION – Estimates missing data using last observation carried forward interpolation
If no data point is found for an interval, IoT SiteWise returns the last observed data point for the previous interval and carries forward this interpolated value until a new data point is found.
For example, you can get the state of an on-off valve every 24 hours over a duration of 7 days. If the interpolation starts July 1, 2021, at 9 AM, IoT SiteWise returns the last observed data point between July 1, 2021, at 9 AM and July 2, 2021, at 9 AM as the first interpolated value. If a data point isn't found after 9 AM on July 2, 2021, IoT SiteWise uses the same interpolated value for the rest of the days.
type - The interpolation type.
Valid values: LINEAR_INTERPOLATION | LOCF_INTERPOLATION
LINEAR_INTERPOLATION – Estimates missing data using linear interpolation.
For example, you can use this operation to return the interpolated temperature values for a wind turbine every 24 hours over a duration of 7 days. If the interpolation starts July 1, 2021, at 9 AM, IoT SiteWise returns the first interpolated value on July 2, 2021, at 9 AM, the second interpolated value on July 3, 2021, at 9 AM, and so on.
LOCF_INTERPOLATION – Estimates missing data using last observation carried forward
interpolation
If no data point is found for an interval, IoT SiteWise returns the last observed data point for the previous interval and carries forward this interpolated value until a new data point is found.
For example, you can get the state of an on-off valve every 24 hours over a duration of 7 days. If the interpolation starts July 1, 2021, at 9 AM, IoT SiteWise returns the last observed data point between July 1, 2021, at 9 AM and July 2, 2021, at 9 AM as the first interpolated value. If a data point isn't found after 9 AM on July 2, 2021, IoT SiteWise uses the same interpolated value for the rest of the days.
GetInterpolatedAssetPropertyValuesRequest.Builder intervalWindowInSeconds(Long intervalWindowInSeconds)
The query interval for the window, in seconds. IoT SiteWise computes each interpolated value by using data points from the timestamp of each interval, minus the window to the timestamp of each interval plus the window. If not specified, the window ranges between the start time minus the interval and the end time plus the interval.
If you specify a value for the intervalWindowInSeconds parameter, the value for the
type parameter must be LINEAR_INTERPOLATION.
If a data point isn't found during the specified query window, IoT SiteWise won't return an interpolated value for the interval. This indicates that there's a gap in the ingested data points.
For example, you can get the interpolated temperature values for a wind turbine every 24 hours over a duration of 7 days. If the interpolation starts on July 1, 2021, at 9 AM with a window of 2 hours, IoT SiteWise uses the data points from 7 AM (9 AM minus 2 hours) to 11 AM (9 AM plus 2 hours) on July 2, 2021 to compute the first interpolated value. Next, IoT SiteWise uses the data points from 7 AM (9 AM minus 2 hours) to 11 AM (9 AM plus 2 hours) on July 3, 2021 to compute the second interpolated value, and so on.
intervalWindowInSeconds - The query interval for the window, in seconds. IoT SiteWise computes each interpolated value by using
data points from the timestamp of each interval, minus the window to the timestamp of each interval
plus the window. If not specified, the window ranges between the start time minus the interval and the
end time plus the interval.
If you specify a value for the intervalWindowInSeconds parameter, the value for the
type parameter must be LINEAR_INTERPOLATION.
If a data point isn't found during the specified query window, IoT SiteWise won't return an interpolated value for the interval. This indicates that there's a gap in the ingested data points.
For example, you can get the interpolated temperature values for a wind turbine every 24 hours over a duration of 7 days. If the interpolation starts on July 1, 2021, at 9 AM with a window of 2 hours, IoT SiteWise uses the data points from 7 AM (9 AM minus 2 hours) to 11 AM (9 AM plus 2 hours) on July 2, 2021 to compute the first interpolated value. Next, IoT SiteWise uses the data points from 7 AM (9 AM minus 2 hours) to 11 AM (9 AM plus 2 hours) on July 3, 2021 to compute the second interpolated value, and so on.
GetInterpolatedAssetPropertyValuesRequest.Builder overrideConfiguration(AwsRequestOverrideConfiguration overrideConfiguration)
overrideConfiguration in interface AwsRequest.BuilderGetInterpolatedAssetPropertyValuesRequest.Builder overrideConfiguration(Consumer<AwsRequestOverrideConfiguration.Builder> builderConsumer)
overrideConfiguration in interface AwsRequest.BuilderCopyright © 2022. All rights reserved.