public static interface GetHlsStreamingSessionUrlRequest.Builder extends KinesisVideoArchivedMediaRequest.Builder, SdkPojo, CopyableBuilder<GetHlsStreamingSessionUrlRequest.Builder,GetHlsStreamingSessionUrlRequest>
| Modifier and Type | Method and Description |
|---|---|
GetHlsStreamingSessionUrlRequest.Builder |
containerFormat(ContainerFormat containerFormat)
Specifies which format should be used for packaging the media.
|
GetHlsStreamingSessionUrlRequest.Builder |
containerFormat(String containerFormat)
Specifies which format should be used for packaging the media.
|
GetHlsStreamingSessionUrlRequest.Builder |
discontinuityMode(HLSDiscontinuityMode discontinuityMode)
Specifies when flags marking discontinuities between fragments are added to the media playlists.
|
GetHlsStreamingSessionUrlRequest.Builder |
discontinuityMode(String discontinuityMode)
Specifies when flags marking discontinuities between fragments are added to the media playlists.
|
GetHlsStreamingSessionUrlRequest.Builder |
displayFragmentTimestamp(HLSDisplayFragmentTimestamp displayFragmentTimestamp)
Specifies when the fragment start timestamps should be included in the HLS media playlist.
|
GetHlsStreamingSessionUrlRequest.Builder |
displayFragmentTimestamp(String displayFragmentTimestamp)
Specifies when the fragment start timestamps should be included in the HLS media playlist.
|
GetHlsStreamingSessionUrlRequest.Builder |
expires(Integer expires)
The time in seconds until the requested session expires.
|
default GetHlsStreamingSessionUrlRequest.Builder |
hlsFragmentSelector(Consumer<HLSFragmentSelector.Builder> hlsFragmentSelector)
The time range of the requested fragment and the source of the timestamps.
|
GetHlsStreamingSessionUrlRequest.Builder |
hlsFragmentSelector(HLSFragmentSelector hlsFragmentSelector)
The time range of the requested fragment and the source of the timestamps.
|
GetHlsStreamingSessionUrlRequest.Builder |
maxMediaPlaylistFragmentResults(Long maxMediaPlaylistFragmentResults)
The maximum number of fragments that are returned in the HLS media playlists.
|
GetHlsStreamingSessionUrlRequest.Builder |
overrideConfiguration(AwsRequestOverrideConfiguration overrideConfiguration) |
GetHlsStreamingSessionUrlRequest.Builder |
overrideConfiguration(Consumer<AwsRequestOverrideConfiguration.Builder> builderConsumer) |
GetHlsStreamingSessionUrlRequest.Builder |
playbackMode(HLSPlaybackMode playbackMode)
Whether to retrieve live, live replay, or archived, on-demand data.
|
GetHlsStreamingSessionUrlRequest.Builder |
playbackMode(String playbackMode)
Whether to retrieve live, live replay, or archived, on-demand data.
|
GetHlsStreamingSessionUrlRequest.Builder |
streamARN(String streamARN)
The Amazon Resource Name (ARN) of the stream for which to retrieve the HLS master playlist URL.
|
GetHlsStreamingSessionUrlRequest.Builder |
streamName(String streamName)
The name of the stream for which to retrieve the HLS master playlist URL.
|
buildoverrideConfigurationequalsBySdkFields, sdkFieldscopyapplyMutation, buildGetHlsStreamingSessionUrlRequest.Builder streamName(String streamName)
The name of the stream for which to retrieve the HLS master playlist URL.
You must specify either the StreamName or the StreamARN.
streamName - The name of the stream for which to retrieve the HLS master playlist URL.
You must specify either the StreamName or the StreamARN.
GetHlsStreamingSessionUrlRequest.Builder streamARN(String streamARN)
The Amazon Resource Name (ARN) of the stream for which to retrieve the HLS master playlist URL.
You must specify either the StreamName or the StreamARN.
streamARN - The Amazon Resource Name (ARN) of the stream for which to retrieve the HLS master playlist URL.
You must specify either the StreamName or the StreamARN.
GetHlsStreamingSessionUrlRequest.Builder playbackMode(String playbackMode)
Whether to retrieve live, live replay, or archived, on-demand data.
Features of the three types of sessions include the following:
LIVE : For sessions of this type, the HLS media playlist is continually updated with the
latest fragments as they become available. We recommend that the media player retrieve a new playlist on a
one-second interval. When this type of session is played in a media player, the user interface typically
displays a "live" notification, with no scrubber control for choosing the position in the playback window to
display.
In LIVE mode, the newest available fragments are included in an HLS media playlist, even if
there is a gap between fragments (that is, if a fragment is missing). A gap like this might cause a media
player to halt or cause a jump in playback. In this mode, fragments are not added to the HLS media playlist
if they are older than the newest fragment in the playlist. If the missing fragment becomes available after a
subsequent fragment is added to the playlist, the older fragment is not added, and the gap is not filled.
LIVE_REPLAY : For sessions of this type, the HLS media playlist is updated similarly to
how it is updated for LIVE mode except that it starts by including fragments from a given start
time. Instead of fragments being added as they are ingested, fragments are added as the duration of the next
fragment elapses. For example, if the fragments in the session are two seconds long, then a new fragment is
added to the media playlist every two seconds. This mode is useful to be able to start playback from when an
event is detected and continue live streaming media that has not yet been ingested as of the time of the
session creation. This mode is also useful to stream previously archived media without being limited by the
1,000 fragment limit in the ON_DEMAND mode.
ON_DEMAND : For sessions of this type, the HLS media playlist contains all the fragments
for the session, up to the number that is specified in MaxMediaPlaylistFragmentResults. The
playlist must be retrieved only once for each session. When this type of session is played in a media player,
the user interface typically displays a scrubber control for choosing the position in the playback window to
display.
In all playback modes, if FragmentSelectorType is PRODUCER_TIMESTAMP, and if there
are multiple fragments with the same start timestamp, the fragment that has the largest fragment number (that
is, the newest fragment) is included in the HLS media playlist. The other fragments are not included.
Fragments that have different timestamps but have overlapping durations are still included in the HLS media
playlist. This can lead to unexpected behavior in the media player.
The default is LIVE.
playbackMode - Whether to retrieve live, live replay, or archived, on-demand data.
Features of the three types of sessions include the following:
LIVE : For sessions of this type, the HLS media playlist is continually updated
with the latest fragments as they become available. We recommend that the media player retrieve a new
playlist on a one-second interval. When this type of session is played in a media player, the user
interface typically displays a "live" notification, with no scrubber control for choosing the position
in the playback window to display.
In LIVE mode, the newest available fragments are included in an HLS media playlist, even
if there is a gap between fragments (that is, if a fragment is missing). A gap like this might cause a
media player to halt or cause a jump in playback. In this mode, fragments are not added to the HLS
media playlist if they are older than the newest fragment in the playlist. If the missing fragment
becomes available after a subsequent fragment is added to the playlist, the older fragment is not
added, and the gap is not filled.
LIVE_REPLAY : For sessions of this type, the HLS media playlist is updated
similarly to how it is updated for LIVE mode except that it starts by including fragments
from a given start time. Instead of fragments being added as they are ingested, fragments are added as
the duration of the next fragment elapses. For example, if the fragments in the session are two
seconds long, then a new fragment is added to the media playlist every two seconds. This mode is
useful to be able to start playback from when an event is detected and continue live streaming media
that has not yet been ingested as of the time of the session creation. This mode is also useful to
stream previously archived media without being limited by the 1,000 fragment limit in the
ON_DEMAND mode.
ON_DEMAND : For sessions of this type, the HLS media playlist contains all the
fragments for the session, up to the number that is specified in
MaxMediaPlaylistFragmentResults. The playlist must be retrieved only once for each
session. When this type of session is played in a media player, the user interface typically displays
a scrubber control for choosing the position in the playback window to display.
In all playback modes, if FragmentSelectorType is PRODUCER_TIMESTAMP, and if
there are multiple fragments with the same start timestamp, the fragment that has the largest fragment
number (that is, the newest fragment) is included in the HLS media playlist. The other fragments are
not included. Fragments that have different timestamps but have overlapping durations are still
included in the HLS media playlist. This can lead to unexpected behavior in the media player.
The default is LIVE.
HLSPlaybackMode,
HLSPlaybackModeGetHlsStreamingSessionUrlRequest.Builder playbackMode(HLSPlaybackMode playbackMode)
Whether to retrieve live, live replay, or archived, on-demand data.
Features of the three types of sessions include the following:
LIVE : For sessions of this type, the HLS media playlist is continually updated with the
latest fragments as they become available. We recommend that the media player retrieve a new playlist on a
one-second interval. When this type of session is played in a media player, the user interface typically
displays a "live" notification, with no scrubber control for choosing the position in the playback window to
display.
In LIVE mode, the newest available fragments are included in an HLS media playlist, even if
there is a gap between fragments (that is, if a fragment is missing). A gap like this might cause a media
player to halt or cause a jump in playback. In this mode, fragments are not added to the HLS media playlist
if they are older than the newest fragment in the playlist. If the missing fragment becomes available after a
subsequent fragment is added to the playlist, the older fragment is not added, and the gap is not filled.
LIVE_REPLAY : For sessions of this type, the HLS media playlist is updated similarly to
how it is updated for LIVE mode except that it starts by including fragments from a given start
time. Instead of fragments being added as they are ingested, fragments are added as the duration of the next
fragment elapses. For example, if the fragments in the session are two seconds long, then a new fragment is
added to the media playlist every two seconds. This mode is useful to be able to start playback from when an
event is detected and continue live streaming media that has not yet been ingested as of the time of the
session creation. This mode is also useful to stream previously archived media without being limited by the
1,000 fragment limit in the ON_DEMAND mode.
ON_DEMAND : For sessions of this type, the HLS media playlist contains all the fragments
for the session, up to the number that is specified in MaxMediaPlaylistFragmentResults. The
playlist must be retrieved only once for each session. When this type of session is played in a media player,
the user interface typically displays a scrubber control for choosing the position in the playback window to
display.
In all playback modes, if FragmentSelectorType is PRODUCER_TIMESTAMP, and if there
are multiple fragments with the same start timestamp, the fragment that has the largest fragment number (that
is, the newest fragment) is included in the HLS media playlist. The other fragments are not included.
Fragments that have different timestamps but have overlapping durations are still included in the HLS media
playlist. This can lead to unexpected behavior in the media player.
The default is LIVE.
playbackMode - Whether to retrieve live, live replay, or archived, on-demand data.
Features of the three types of sessions include the following:
LIVE : For sessions of this type, the HLS media playlist is continually updated
with the latest fragments as they become available. We recommend that the media player retrieve a new
playlist on a one-second interval. When this type of session is played in a media player, the user
interface typically displays a "live" notification, with no scrubber control for choosing the position
in the playback window to display.
In LIVE mode, the newest available fragments are included in an HLS media playlist, even
if there is a gap between fragments (that is, if a fragment is missing). A gap like this might cause a
media player to halt or cause a jump in playback. In this mode, fragments are not added to the HLS
media playlist if they are older than the newest fragment in the playlist. If the missing fragment
becomes available after a subsequent fragment is added to the playlist, the older fragment is not
added, and the gap is not filled.
LIVE_REPLAY : For sessions of this type, the HLS media playlist is updated
similarly to how it is updated for LIVE mode except that it starts by including fragments
from a given start time. Instead of fragments being added as they are ingested, fragments are added as
the duration of the next fragment elapses. For example, if the fragments in the session are two
seconds long, then a new fragment is added to the media playlist every two seconds. This mode is
useful to be able to start playback from when an event is detected and continue live streaming media
that has not yet been ingested as of the time of the session creation. This mode is also useful to
stream previously archived media without being limited by the 1,000 fragment limit in the
ON_DEMAND mode.
ON_DEMAND : For sessions of this type, the HLS media playlist contains all the
fragments for the session, up to the number that is specified in
MaxMediaPlaylistFragmentResults. The playlist must be retrieved only once for each
session. When this type of session is played in a media player, the user interface typically displays
a scrubber control for choosing the position in the playback window to display.
In all playback modes, if FragmentSelectorType is PRODUCER_TIMESTAMP, and if
there are multiple fragments with the same start timestamp, the fragment that has the largest fragment
number (that is, the newest fragment) is included in the HLS media playlist. The other fragments are
not included. Fragments that have different timestamps but have overlapping durations are still
included in the HLS media playlist. This can lead to unexpected behavior in the media player.
The default is LIVE.
HLSPlaybackMode,
HLSPlaybackModeGetHlsStreamingSessionUrlRequest.Builder hlsFragmentSelector(HLSFragmentSelector hlsFragmentSelector)
The time range of the requested fragment and the source of the timestamps.
This parameter is required if PlaybackMode is ON_DEMAND or LIVE_REPLAY
. This parameter is optional if PlaybackMode is LIVE. If PlaybackMode is
LIVE, the FragmentSelectorType can be set, but the TimestampRange
should not be set. If PlaybackMode is ON_DEMAND or LIVE_REPLAY, both
FragmentSelectorType and TimestampRange must be set.
hlsFragmentSelector - The time range of the requested fragment and the source of the timestamps.
This parameter is required if PlaybackMode is ON_DEMAND or
LIVE_REPLAY. This parameter is optional if PlaybackMode is LIVE. If
PlaybackMode is LIVE, the FragmentSelectorType can be set, but
the TimestampRange should not be set. If PlaybackMode is
ON_DEMAND or LIVE_REPLAY, both FragmentSelectorType and
TimestampRange must be set.
default GetHlsStreamingSessionUrlRequest.Builder hlsFragmentSelector(Consumer<HLSFragmentSelector.Builder> hlsFragmentSelector)
The time range of the requested fragment and the source of the timestamps.
This parameter is required if PlaybackMode is ON_DEMAND or LIVE_REPLAY
. This parameter is optional if PlaybackMode is LIVE. If PlaybackMode is
LIVE, the FragmentSelectorType can be set, but the TimestampRange
should not be set. If PlaybackMode is ON_DEMAND or LIVE_REPLAY, both
FragmentSelectorType and TimestampRange must be set.
HLSFragmentSelector.Builder avoiding the
need to create one manually via HLSFragmentSelector.builder().
When the Consumer completes, SdkBuilder.build() is called immediately and
its result is passed to hlsFragmentSelector(HLSFragmentSelector).
hlsFragmentSelector - a consumer that will call methods on HLSFragmentSelector.BuilderhlsFragmentSelector(HLSFragmentSelector)GetHlsStreamingSessionUrlRequest.Builder containerFormat(String containerFormat)
Specifies which format should be used for packaging the media. Specifying the FRAGMENTED_MP4
container format packages the media into MP4 fragments (fMP4 or CMAF). This is the recommended packaging
because there is minimal packaging overhead. The other container format option is MPEG_TS. HLS
has supported MPEG TS chunks since it was released and is sometimes the only supported packaging on older HLS
players. MPEG TS typically has a 5-25 percent packaging overhead. This means MPEG TS typically requires 5-25
percent more bandwidth and cost than fMP4.
The default is FRAGMENTED_MP4.
containerFormat - Specifies which format should be used for packaging the media. Specifying the
FRAGMENTED_MP4 container format packages the media into MP4 fragments (fMP4 or CMAF).
This is the recommended packaging because there is minimal packaging overhead. The other container
format option is MPEG_TS. HLS has supported MPEG TS chunks since it was released and is
sometimes the only supported packaging on older HLS players. MPEG TS typically has a 5-25 percent
packaging overhead. This means MPEG TS typically requires 5-25 percent more bandwidth and cost than
fMP4.
The default is FRAGMENTED_MP4.
ContainerFormat,
ContainerFormatGetHlsStreamingSessionUrlRequest.Builder containerFormat(ContainerFormat containerFormat)
Specifies which format should be used for packaging the media. Specifying the FRAGMENTED_MP4
container format packages the media into MP4 fragments (fMP4 or CMAF). This is the recommended packaging
because there is minimal packaging overhead. The other container format option is MPEG_TS. HLS
has supported MPEG TS chunks since it was released and is sometimes the only supported packaging on older HLS
players. MPEG TS typically has a 5-25 percent packaging overhead. This means MPEG TS typically requires 5-25
percent more bandwidth and cost than fMP4.
The default is FRAGMENTED_MP4.
containerFormat - Specifies which format should be used for packaging the media. Specifying the
FRAGMENTED_MP4 container format packages the media into MP4 fragments (fMP4 or CMAF).
This is the recommended packaging because there is minimal packaging overhead. The other container
format option is MPEG_TS. HLS has supported MPEG TS chunks since it was released and is
sometimes the only supported packaging on older HLS players. MPEG TS typically has a 5-25 percent
packaging overhead. This means MPEG TS typically requires 5-25 percent more bandwidth and cost than
fMP4.
The default is FRAGMENTED_MP4.
ContainerFormat,
ContainerFormatGetHlsStreamingSessionUrlRequest.Builder discontinuityMode(String discontinuityMode)
Specifies when flags marking discontinuities between fragments are added to the media playlists.
Media players typically build a timeline of media content to play, based on the timestamps of each fragment.
This means that if there is any overlap or gap between fragments (as is typical if HLSFragmentSelector
is set to SERVER_TIMESTAMP), the media player timeline will also have small gaps between
fragments in some places, and will overwrite frames in other places. Gaps in the media player timeline can
cause playback to stall and overlaps can cause playback to be jittery. When there are discontinuity flags
between fragments, the media player is expected to reset the timeline, resulting in the next fragment being
played immediately after the previous fragment.
The following modes are supported:
ALWAYS: a discontinuity marker is placed between every fragment in the HLS media playlist. It is
recommended to use a value of ALWAYS if the fragment timestamps are not accurate.
NEVER: no discontinuity markers are placed anywhere. It is recommended to use a value of
NEVER to ensure the media player timeline most accurately maps to the producer timestamps.
ON_DISCONTINUITY: a discontinuity marker is placed between fragments that have a gap or overlap
of more than 50 milliseconds. For most playback scenarios, it is recommended to use a value of
ON_DISCONTINUITY so that the media player timeline is only reset when there is a significant
issue with the media timeline (e.g. a missing fragment).
The default is ALWAYS when HLSFragmentSelector is set to SERVER_TIMESTAMP,
and NEVER when it is set to PRODUCER_TIMESTAMP.
discontinuityMode - Specifies when flags marking discontinuities between fragments are added to the media playlists.
Media players typically build a timeline of media content to play, based on the timestamps of each
fragment. This means that if there is any overlap or gap between fragments (as is typical if
HLSFragmentSelector is set to SERVER_TIMESTAMP), the media player timeline will
also have small gaps between fragments in some places, and will overwrite frames in other places. Gaps
in the media player timeline can cause playback to stall and overlaps can cause playback to be
jittery. When there are discontinuity flags between fragments, the media player is expected to reset
the timeline, resulting in the next fragment being played immediately after the previous fragment.
The following modes are supported:
ALWAYS: a discontinuity marker is placed between every fragment in the HLS media
playlist. It is recommended to use a value of ALWAYS if the fragment timestamps are not
accurate.
NEVER: no discontinuity markers are placed anywhere. It is recommended to use a value of
NEVER to ensure the media player timeline most accurately maps to the producer
timestamps.
ON_DISCONTINUITY: a discontinuity marker is placed between fragments that have a gap or
overlap of more than 50 milliseconds. For most playback scenarios, it is recommended to use a value of
ON_DISCONTINUITY so that the media player timeline is only reset when there is a
significant issue with the media timeline (e.g. a missing fragment).
The default is ALWAYS when HLSFragmentSelector is set to
SERVER_TIMESTAMP, and NEVER when it is set to
PRODUCER_TIMESTAMP.
HLSDiscontinuityMode,
HLSDiscontinuityModeGetHlsStreamingSessionUrlRequest.Builder discontinuityMode(HLSDiscontinuityMode discontinuityMode)
Specifies when flags marking discontinuities between fragments are added to the media playlists.
Media players typically build a timeline of media content to play, based on the timestamps of each fragment.
This means that if there is any overlap or gap between fragments (as is typical if HLSFragmentSelector
is set to SERVER_TIMESTAMP), the media player timeline will also have small gaps between
fragments in some places, and will overwrite frames in other places. Gaps in the media player timeline can
cause playback to stall and overlaps can cause playback to be jittery. When there are discontinuity flags
between fragments, the media player is expected to reset the timeline, resulting in the next fragment being
played immediately after the previous fragment.
The following modes are supported:
ALWAYS: a discontinuity marker is placed between every fragment in the HLS media playlist. It is
recommended to use a value of ALWAYS if the fragment timestamps are not accurate.
NEVER: no discontinuity markers are placed anywhere. It is recommended to use a value of
NEVER to ensure the media player timeline most accurately maps to the producer timestamps.
ON_DISCONTINUITY: a discontinuity marker is placed between fragments that have a gap or overlap
of more than 50 milliseconds. For most playback scenarios, it is recommended to use a value of
ON_DISCONTINUITY so that the media player timeline is only reset when there is a significant
issue with the media timeline (e.g. a missing fragment).
The default is ALWAYS when HLSFragmentSelector is set to SERVER_TIMESTAMP,
and NEVER when it is set to PRODUCER_TIMESTAMP.
discontinuityMode - Specifies when flags marking discontinuities between fragments are added to the media playlists.
Media players typically build a timeline of media content to play, based on the timestamps of each
fragment. This means that if there is any overlap or gap between fragments (as is typical if
HLSFragmentSelector is set to SERVER_TIMESTAMP), the media player timeline will
also have small gaps between fragments in some places, and will overwrite frames in other places. Gaps
in the media player timeline can cause playback to stall and overlaps can cause playback to be
jittery. When there are discontinuity flags between fragments, the media player is expected to reset
the timeline, resulting in the next fragment being played immediately after the previous fragment.
The following modes are supported:
ALWAYS: a discontinuity marker is placed between every fragment in the HLS media
playlist. It is recommended to use a value of ALWAYS if the fragment timestamps are not
accurate.
NEVER: no discontinuity markers are placed anywhere. It is recommended to use a value of
NEVER to ensure the media player timeline most accurately maps to the producer
timestamps.
ON_DISCONTINUITY: a discontinuity marker is placed between fragments that have a gap or
overlap of more than 50 milliseconds. For most playback scenarios, it is recommended to use a value of
ON_DISCONTINUITY so that the media player timeline is only reset when there is a
significant issue with the media timeline (e.g. a missing fragment).
The default is ALWAYS when HLSFragmentSelector is set to
SERVER_TIMESTAMP, and NEVER when it is set to
PRODUCER_TIMESTAMP.
HLSDiscontinuityMode,
HLSDiscontinuityModeGetHlsStreamingSessionUrlRequest.Builder displayFragmentTimestamp(String displayFragmentTimestamp)
Specifies when the fragment start timestamps should be included in the HLS media playlist. Typically, media players report the playhead position as a time relative to the start of the first fragment in the playback session. However, when the start timestamps are included in the HLS media playlist, some media players might report the current playhead as an absolute time based on the fragment timestamps. This can be useful for creating a playback experience that shows viewers the wall-clock time of the media.
The default is NEVER. When HLSFragmentSelector is SERVER_TIMESTAMP, the
timestamps will be the server start timestamps. Similarly, when HLSFragmentSelector is
PRODUCER_TIMESTAMP, the timestamps will be the producer start timestamps.
displayFragmentTimestamp - Specifies when the fragment start timestamps should be included in the HLS media playlist. Typically,
media players report the playhead position as a time relative to the start of the first fragment in
the playback session. However, when the start timestamps are included in the HLS media playlist, some
media players might report the current playhead as an absolute time based on the fragment timestamps.
This can be useful for creating a playback experience that shows viewers the wall-clock time of the
media.
The default is NEVER. When HLSFragmentSelector is SERVER_TIMESTAMP,
the timestamps will be the server start timestamps. Similarly, when HLSFragmentSelector is
PRODUCER_TIMESTAMP, the timestamps will be the producer start timestamps.
HLSDisplayFragmentTimestamp,
HLSDisplayFragmentTimestampGetHlsStreamingSessionUrlRequest.Builder displayFragmentTimestamp(HLSDisplayFragmentTimestamp displayFragmentTimestamp)
Specifies when the fragment start timestamps should be included in the HLS media playlist. Typically, media players report the playhead position as a time relative to the start of the first fragment in the playback session. However, when the start timestamps are included in the HLS media playlist, some media players might report the current playhead as an absolute time based on the fragment timestamps. This can be useful for creating a playback experience that shows viewers the wall-clock time of the media.
The default is NEVER. When HLSFragmentSelector is SERVER_TIMESTAMP, the
timestamps will be the server start timestamps. Similarly, when HLSFragmentSelector is
PRODUCER_TIMESTAMP, the timestamps will be the producer start timestamps.
displayFragmentTimestamp - Specifies when the fragment start timestamps should be included in the HLS media playlist. Typically,
media players report the playhead position as a time relative to the start of the first fragment in
the playback session. However, when the start timestamps are included in the HLS media playlist, some
media players might report the current playhead as an absolute time based on the fragment timestamps.
This can be useful for creating a playback experience that shows viewers the wall-clock time of the
media.
The default is NEVER. When HLSFragmentSelector is SERVER_TIMESTAMP,
the timestamps will be the server start timestamps. Similarly, when HLSFragmentSelector is
PRODUCER_TIMESTAMP, the timestamps will be the producer start timestamps.
HLSDisplayFragmentTimestamp,
HLSDisplayFragmentTimestampGetHlsStreamingSessionUrlRequest.Builder expires(Integer expires)
The time in seconds until the requested session expires. This value can be between 300 (5 minutes) and 43200 (12 hours).
When a session expires, no new calls to GetHLSMasterPlaylist, GetHLSMediaPlaylist,
GetMP4InitFragment, GetMP4MediaFragment, or GetTSFragment can be made
for that session.
The default is 300 (5 minutes).
expires - The time in seconds until the requested session expires. This value can be between 300 (5 minutes) and
43200 (12 hours).
When a session expires, no new calls to GetHLSMasterPlaylist,
GetHLSMediaPlaylist, GetMP4InitFragment, GetMP4MediaFragment,
or GetTSFragment can be made for that session.
The default is 300 (5 minutes).
GetHlsStreamingSessionUrlRequest.Builder maxMediaPlaylistFragmentResults(Long maxMediaPlaylistFragmentResults)
The maximum number of fragments that are returned in the HLS media playlists.
When the PlaybackMode is LIVE, the most recent fragments are returned up to this
value. When the PlaybackMode is ON_DEMAND, the oldest fragments are returned, up to
this maximum number.
When there are a higher number of fragments available in a live HLS media playlist, video players often buffer content before starting playback. Increasing the buffer size increases the playback latency, but it decreases the likelihood that rebuffering will occur during playback. We recommend that a live HLS media playlist have a minimum of 3 fragments and a maximum of 10 fragments.
The default is 5 fragments if PlaybackMode is LIVE or LIVE_REPLAY, and
1,000 if PlaybackMode is ON_DEMAND.
The maximum value of 5,000 fragments corresponds to more than 80 minutes of video on streams with 1-second fragments, and more than 13 hours of video on streams with 10-second fragments.
maxMediaPlaylistFragmentResults - The maximum number of fragments that are returned in the HLS media playlists.
When the PlaybackMode is LIVE, the most recent fragments are returned up to
this value. When the PlaybackMode is ON_DEMAND, the oldest fragments are
returned, up to this maximum number.
When there are a higher number of fragments available in a live HLS media playlist, video players often buffer content before starting playback. Increasing the buffer size increases the playback latency, but it decreases the likelihood that rebuffering will occur during playback. We recommend that a live HLS media playlist have a minimum of 3 fragments and a maximum of 10 fragments.
The default is 5 fragments if PlaybackMode is LIVE or
LIVE_REPLAY, and 1,000 if PlaybackMode is ON_DEMAND.
The maximum value of 5,000 fragments corresponds to more than 80 minutes of video on streams with 1-second fragments, and more than 13 hours of video on streams with 10-second fragments.
GetHlsStreamingSessionUrlRequest.Builder overrideConfiguration(AwsRequestOverrideConfiguration overrideConfiguration)
overrideConfiguration in interface AwsRequest.BuilderGetHlsStreamingSessionUrlRequest.Builder overrideConfiguration(Consumer<AwsRequestOverrideConfiguration.Builder> builderConsumer)
overrideConfiguration in interface AwsRequest.BuilderCopyright © 2023. All rights reserved.