All Superinterfaces:

AutoCloseable, AwsClient, SdkAutoCloseable, SdkClient
```
@Generated("software.amazon.awssdk:codegen")
@ThreadSafe
public interface Route53RecoveryControlConfigClient
extends AwsClient
```
Service client for accessing AWS Route53 Recovery Control Config. This can be created using the static builder() method.
Recovery Control Configuration API Reference for Amazon Route 53 Application Recovery Controller

Field Summary

Fields
Modifier and Type Field Description

static String SERVICE_METADATA_ID
Value for looking up the service's metadata from the ServiceMetadataProvider.

static String SERVICE_NAME

Method Summary

All Methods Static Methods Instance Methods Default Methods
Modifier and Type	Method	Description
`static Route53RecoveryControlConfigClientBuilder`	`builder()`	Create a builder that can be used to configure and create a `Route53RecoveryControlConfigClient`.
`static Route53RecoveryControlConfigClient`	`create()`	Create a `Route53RecoveryControlConfigClient` with the region loaded from the `DefaultAwsRegionProviderChain` and credentials loaded from the `DefaultCredentialsProvider`.
`default CreateClusterResponse`	`createCluster(Consumer<CreateClusterRequest.Builder> createClusterRequest)`	Create a new cluster.
`default CreateClusterResponse`	`createCluster(CreateClusterRequest createClusterRequest)`	Create a new cluster.
`default CreateControlPanelResponse`	`createControlPanel(Consumer<CreateControlPanelRequest.Builder> createControlPanelRequest)`	Creates a new control panel.
`default CreateControlPanelResponse`	`createControlPanel(CreateControlPanelRequest createControlPanelRequest)`	Creates a new control panel.
`default CreateRoutingControlResponse`	`createRoutingControl(Consumer<CreateRoutingControlRequest.Builder> createRoutingControlRequest)`	Creates a new routing control.
`default CreateRoutingControlResponse`	`createRoutingControl(CreateRoutingControlRequest createRoutingControlRequest)`	Creates a new routing control.
`default CreateSafetyRuleResponse`	`createSafetyRule(Consumer<CreateSafetyRuleRequest.Builder> createSafetyRuleRequest)`	Creates a safety rule in a control panel.
`default CreateSafetyRuleResponse`	`createSafetyRule(CreateSafetyRuleRequest createSafetyRuleRequest)`	Creates a safety rule in a control panel.
`default DeleteClusterResponse`	`deleteCluster(Consumer<DeleteClusterRequest.Builder> deleteClusterRequest)`	Delete a cluster.
`default DeleteClusterResponse`	`deleteCluster(DeleteClusterRequest deleteClusterRequest)`	Delete a cluster.
`default DeleteControlPanelResponse`	`deleteControlPanel(Consumer<DeleteControlPanelRequest.Builder> deleteControlPanelRequest)`	Deletes a control panel.
`default DeleteControlPanelResponse`	`deleteControlPanel(DeleteControlPanelRequest deleteControlPanelRequest)`	Deletes a control panel.
`default DeleteRoutingControlResponse`	`deleteRoutingControl(Consumer<DeleteRoutingControlRequest.Builder> deleteRoutingControlRequest)`	Deletes a routing control.
`default DeleteRoutingControlResponse`	`deleteRoutingControl(DeleteRoutingControlRequest deleteRoutingControlRequest)`	Deletes a routing control.
`default DeleteSafetyRuleResponse`	`deleteSafetyRule(Consumer<DeleteSafetyRuleRequest.Builder> deleteSafetyRuleRequest)`	Deletes a safety rule.
`default DeleteSafetyRuleResponse`	`deleteSafetyRule(DeleteSafetyRuleRequest deleteSafetyRuleRequest)`	Deletes a safety rule.
`default DescribeClusterResponse`	`describeCluster(Consumer<DescribeClusterRequest.Builder> describeClusterRequest)`	Display the details about a cluster.
`default DescribeClusterResponse`	`describeCluster(DescribeClusterRequest describeClusterRequest)`	Display the details about a cluster.
`default DescribeControlPanelResponse`	`describeControlPanel(Consumer<DescribeControlPanelRequest.Builder> describeControlPanelRequest)`	Displays details about a control panel.
`default DescribeControlPanelResponse`	`describeControlPanel(DescribeControlPanelRequest describeControlPanelRequest)`	Displays details about a control panel.
`default DescribeRoutingControlResponse`	`describeRoutingControl(Consumer<DescribeRoutingControlRequest.Builder> describeRoutingControlRequest)`	Displays details about a routing control.
`default DescribeRoutingControlResponse`	`describeRoutingControl(DescribeRoutingControlRequest describeRoutingControlRequest)`	Displays details about a routing control.
`default DescribeSafetyRuleResponse`	`describeSafetyRule(Consumer<DescribeSafetyRuleRequest.Builder> describeSafetyRuleRequest)`	Returns information about a safety rule.
`default DescribeSafetyRuleResponse`	`describeSafetyRule(DescribeSafetyRuleRequest describeSafetyRuleRequest)`	Returns information about a safety rule.
`default GetResourcePolicyResponse`	`getResourcePolicy(Consumer<GetResourcePolicyRequest.Builder> getResourcePolicyRequest)`	Get information about the resource policy for a cluster.
`default GetResourcePolicyResponse`	`getResourcePolicy(GetResourcePolicyRequest getResourcePolicyRequest)`	Get information about the resource policy for a cluster.
`default ListAssociatedRoute53HealthChecksResponse`	`listAssociatedRoute53HealthChecks(Consumer<ListAssociatedRoute53HealthChecksRequest.Builder> listAssociatedRoute53HealthChecksRequest)`	Returns an array of all Amazon Route 53 health checks associated with a specific routing control.
`default ListAssociatedRoute53HealthChecksResponse`	`listAssociatedRoute53HealthChecks(ListAssociatedRoute53HealthChecksRequest listAssociatedRoute53HealthChecksRequest)`	Returns an array of all Amazon Route 53 health checks associated with a specific routing control.
`default ListAssociatedRoute53HealthChecksIterable`	`listAssociatedRoute53HealthChecksPaginator(Consumer<ListAssociatedRoute53HealthChecksRequest.Builder> listAssociatedRoute53HealthChecksRequest)`	This is a variant of `listAssociatedRoute53HealthChecks(software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListAssociatedRoute53HealthChecksRequest)` operation.
`default ListAssociatedRoute53HealthChecksIterable`	`listAssociatedRoute53HealthChecksPaginator(ListAssociatedRoute53HealthChecksRequest listAssociatedRoute53HealthChecksRequest)`	This is a variant of `listAssociatedRoute53HealthChecks(software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListAssociatedRoute53HealthChecksRequest)` operation.
`default ListClustersResponse`	`listClusters(Consumer<ListClustersRequest.Builder> listClustersRequest)`	Returns an array of all the clusters in an account.
`default ListClustersResponse`	`listClusters(ListClustersRequest listClustersRequest)`	Returns an array of all the clusters in an account.
`default ListClustersIterable`	`listClustersPaginator(Consumer<ListClustersRequest.Builder> listClustersRequest)`	This is a variant of `listClusters(software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListClustersRequest)` operation.
`default ListClustersIterable`	`listClustersPaginator(ListClustersRequest listClustersRequest)`	This is a variant of `listClusters(software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListClustersRequest)` operation.
`default ListControlPanelsResponse`	`listControlPanels(Consumer<ListControlPanelsRequest.Builder> listControlPanelsRequest)`	Returns an array of control panels in an account or in a cluster.
`default ListControlPanelsResponse`	`listControlPanels(ListControlPanelsRequest listControlPanelsRequest)`	Returns an array of control panels in an account or in a cluster.
`default ListControlPanelsIterable`	`listControlPanelsPaginator(Consumer<ListControlPanelsRequest.Builder> listControlPanelsRequest)`	This is a variant of `listControlPanels(software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListControlPanelsRequest)` operation.
`default ListControlPanelsIterable`	`listControlPanelsPaginator(ListControlPanelsRequest listControlPanelsRequest)`	This is a variant of `listControlPanels(software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListControlPanelsRequest)` operation.
`default ListRoutingControlsResponse`	`listRoutingControls(Consumer<ListRoutingControlsRequest.Builder> listRoutingControlsRequest)`	Returns an array of routing controls for a control panel.
`default ListRoutingControlsResponse`	`listRoutingControls(ListRoutingControlsRequest listRoutingControlsRequest)`	Returns an array of routing controls for a control panel.
`default ListRoutingControlsIterable`	`listRoutingControlsPaginator(Consumer<ListRoutingControlsRequest.Builder> listRoutingControlsRequest)`	This is a variant of `listRoutingControls(software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListRoutingControlsRequest)` operation.
`default ListRoutingControlsIterable`	`listRoutingControlsPaginator(ListRoutingControlsRequest listRoutingControlsRequest)`	This is a variant of `listRoutingControls(software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListRoutingControlsRequest)` operation.
`default ListSafetyRulesResponse`	`listSafetyRules(Consumer<ListSafetyRulesRequest.Builder> listSafetyRulesRequest)`	List the safety rules (the assertion rules and gating rules) that you've defined for the routing controls in a control panel.
`default ListSafetyRulesResponse`	`listSafetyRules(ListSafetyRulesRequest listSafetyRulesRequest)`	List the safety rules (the assertion rules and gating rules) that you've defined for the routing controls in a control panel.
`default ListSafetyRulesIterable`	`listSafetyRulesPaginator(Consumer<ListSafetyRulesRequest.Builder> listSafetyRulesRequest)`	This is a variant of `listSafetyRules(software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListSafetyRulesRequest)` operation.
`default ListSafetyRulesIterable`	`listSafetyRulesPaginator(ListSafetyRulesRequest listSafetyRulesRequest)`	This is a variant of `listSafetyRules(software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListSafetyRulesRequest)` operation.
`default ListTagsForResourceResponse`	`listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)`	Lists the tags for a resource.
`default ListTagsForResourceResponse`	`listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)`	Lists the tags for a resource.
`default Route53RecoveryControlConfigServiceClientConfiguration`	`serviceClientConfiguration()`
`static ServiceMetadata`	`serviceMetadata()`
`default TagResourceResponse`	`tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)`	Adds a tag to a resource.
`default TagResourceResponse`	`tagResource(TagResourceRequest tagResourceRequest)`	Adds a tag to a resource.
`default UntagResourceResponse`	`untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)`	Removes a tag from a resource.
`default UntagResourceResponse`	`untagResource(UntagResourceRequest untagResourceRequest)`	Removes a tag from a resource.
`default UpdateControlPanelResponse`	`updateControlPanel(Consumer<UpdateControlPanelRequest.Builder> updateControlPanelRequest)`	Updates a control panel.
`default UpdateControlPanelResponse`	`updateControlPanel(UpdateControlPanelRequest updateControlPanelRequest)`	Updates a control panel.
`default UpdateRoutingControlResponse`	`updateRoutingControl(Consumer<UpdateRoutingControlRequest.Builder> updateRoutingControlRequest)`	Updates a routing control.
`default UpdateRoutingControlResponse`	`updateRoutingControl(UpdateRoutingControlRequest updateRoutingControlRequest)`	Updates a routing control.
`default UpdateSafetyRuleResponse`	`updateSafetyRule(Consumer<UpdateSafetyRuleRequest.Builder> updateSafetyRuleRequest)`	Update a safety rule (an assertion rule or gating rule).
`default UpdateSafetyRuleResponse`	`updateSafetyRule(UpdateSafetyRuleRequest updateSafetyRuleRequest)`	Update a safety rule (an assertion rule or gating rule).
`default Route53RecoveryControlConfigWaiter`	`waiter()`	Create an instance of `Route53RecoveryControlConfigWaiter` using this client.

Methods inherited from interface software.amazon.awssdk.utils.SdkAutoCloseable
close

Methods inherited from interface software.amazon.awssdk.core.SdkClient
serviceName

- Field Detail
  - SERVICE_NAME
```
static final String SERVICE_NAME
```
    See Also:
    
    Constant Field Values
  - SERVICE_METADATA_ID
```
static final String SERVICE_METADATA_ID
```
    Value for looking up the service's metadata from the ServiceMetadataProvider.
    
    See Also:
    
    Constant Field Values
- Method Detail
  - createCluster
```
default CreateClusterResponse createCluster(CreateClusterRequest createClusterRequest)
                                     throws ValidationException,
                                            InternalServerException,
                                            ServiceQuotaExceededException,
                                            AccessDeniedException,
                                            ResourceNotFoundException,
                                            ThrottlingException,
                                            ConflictException,
                                            AwsServiceException,
                                            SdkClientException,
                                            Route53RecoveryControlConfigException
```
    Create a new cluster. A cluster is a set of redundant Regional endpoints against which you can run API calls to update or get the state of one or more routing controls. Each cluster has a name, status, Amazon Resource Name (ARN), and an array of the five cluster endpoints (one for each supported Amazon Web Services Region) that you can use with API calls to the cluster data plane.
    
    Parameters:
    
    createClusterRequest - Creates a cluster.
    
    Returns:
    
    Result of the CreateCluster operation returned by the service.
    
    Throws:
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    ServiceQuotaExceededException - 402 response
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ConflictException - 409 response - ConflictException. You might be using a predefined variable.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createCluster
```
default CreateClusterResponse createCluster(Consumer<CreateClusterRequest.Builder> createClusterRequest)
                                     throws ValidationException,
                                            InternalServerException,
                                            ServiceQuotaExceededException,
                                            AccessDeniedException,
                                            ResourceNotFoundException,
                                            ThrottlingException,
                                            ConflictException,
                                            AwsServiceException,
                                            SdkClientException,
                                            Route53RecoveryControlConfigException
```
    Create a new cluster. A cluster is a set of redundant Regional endpoints against which you can run API calls to update or get the state of one or more routing controls. Each cluster has a name, status, Amazon Resource Name (ARN), and an array of the five cluster endpoints (one for each supported Amazon Web Services Region) that you can use with API calls to the cluster data plane.
    
    This is a convenience which creates an instance of the CreateClusterRequest.Builder avoiding the need to create one manually via CreateClusterRequest.builder()
    
    Parameters:
    
    createClusterRequest - A Consumer that will call methods on CreateClusterRequest.Builder to create a request. Creates a cluster.
    
    Returns:
    
    Result of the CreateCluster operation returned by the service.
    
    Throws:
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    ServiceQuotaExceededException - 402 response
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ConflictException - 409 response - ConflictException. You might be using a predefined variable.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createControlPanel
```
default CreateControlPanelResponse createControlPanel(CreateControlPanelRequest createControlPanelRequest)
                                               throws ValidationException,
                                                      InternalServerException,
                                                      ServiceQuotaExceededException,
                                                      AccessDeniedException,
                                                      ResourceNotFoundException,
                                                      ThrottlingException,
                                                      ConflictException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      Route53RecoveryControlConfigException
```
    Creates a new control panel. A control panel represents a group of routing controls that can be changed together in a single transaction. You can use a control panel to centrally view the operational status of applications across your organization, and trigger multi-app failovers in a single transaction, for example, to fail over an Availability Zone or Amazon Web Services Region.
    
    Parameters:
    
    createControlPanelRequest - The details of the control panel that you're creating.
    
    Returns:
    
    Result of the CreateControlPanel operation returned by the service.
    
    Throws:
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    ServiceQuotaExceededException - 402 response
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ConflictException - 409 response - ConflictException. You might be using a predefined variable.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createControlPanel
```
default CreateControlPanelResponse createControlPanel(Consumer<CreateControlPanelRequest.Builder> createControlPanelRequest)
                                               throws ValidationException,
                                                      InternalServerException,
                                                      ServiceQuotaExceededException,
                                                      AccessDeniedException,
                                                      ResourceNotFoundException,
                                                      ThrottlingException,
                                                      ConflictException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      Route53RecoveryControlConfigException
```
    Creates a new control panel. A control panel represents a group of routing controls that can be changed together in a single transaction. You can use a control panel to centrally view the operational status of applications across your organization, and trigger multi-app failovers in a single transaction, for example, to fail over an Availability Zone or Amazon Web Services Region.
    
    This is a convenience which creates an instance of the CreateControlPanelRequest.Builder avoiding the need to create one manually via CreateControlPanelRequest.builder()
    
    Parameters:
    
    createControlPanelRequest - A Consumer that will call methods on CreateControlPanelRequest.Builder to create a request. The details of the control panel that you're creating.
    
    Returns:
    
    Result of the CreateControlPanel operation returned by the service.
    
    Throws:
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    ServiceQuotaExceededException - 402 response
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ConflictException - 409 response - ConflictException. You might be using a predefined variable.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createRoutingControl
```
default CreateRoutingControlResponse createRoutingControl(CreateRoutingControlRequest createRoutingControlRequest)
                                                   throws ValidationException,
                                                          InternalServerException,
                                                          ServiceQuotaExceededException,
                                                          AccessDeniedException,
                                                          ResourceNotFoundException,
                                                          ThrottlingException,
                                                          ConflictException,
                                                          AwsServiceException,
                                                          SdkClientException,
                                                          Route53RecoveryControlConfigException
```
    Creates a new routing control.
    
    A routing control has one of two states: ON and OFF. You can map the routing control state to the state of an Amazon Route 53 health check, which can be used to control traffic routing.
    
    To get or update the routing control state, see the Recovery Cluster (data plane) API actions for Amazon Route 53 Application Recovery Controller.
    
    Parameters:
    
    createRoutingControlRequest - The details of the routing control that you're creating.
    
    Returns:
    
    Result of the CreateRoutingControl operation returned by the service.
    
    Throws:
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    ServiceQuotaExceededException - 402 response
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ConflictException - 409 response - ConflictException. You might be using a predefined variable.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createRoutingControl
```
default CreateRoutingControlResponse createRoutingControl(Consumer<CreateRoutingControlRequest.Builder> createRoutingControlRequest)
                                                   throws ValidationException,
                                                          InternalServerException,
                                                          ServiceQuotaExceededException,
                                                          AccessDeniedException,
                                                          ResourceNotFoundException,
                                                          ThrottlingException,
                                                          ConflictException,
                                                          AwsServiceException,
                                                          SdkClientException,
                                                          Route53RecoveryControlConfigException
```
    Creates a new routing control.
    
    A routing control has one of two states: ON and OFF. You can map the routing control state to the state of an Amazon Route 53 health check, which can be used to control traffic routing.
    
    To get or update the routing control state, see the Recovery Cluster (data plane) API actions for Amazon Route 53 Application Recovery Controller.
    
    This is a convenience which creates an instance of the CreateRoutingControlRequest.Builder avoiding the need to create one manually via CreateRoutingControlRequest.builder()
    
    Parameters:
    
    createRoutingControlRequest - A Consumer that will call methods on CreateRoutingControlRequest.Builder to create a request. The details of the routing control that you're creating.
    
    Returns:
    
    Result of the CreateRoutingControl operation returned by the service.
    
    Throws:
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    ServiceQuotaExceededException - 402 response
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ConflictException - 409 response - ConflictException. You might be using a predefined variable.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createSafetyRule
```
default CreateSafetyRuleResponse createSafetyRule(CreateSafetyRuleRequest createSafetyRuleRequest)
                                           throws ValidationException,
                                                  InternalServerException,
                                                  AwsServiceException,
                                                  SdkClientException,
                                                  Route53RecoveryControlConfigException
```
    Creates a safety rule in a control panel. Safety rules let you add safeguards around changing routing control states, and for enabling and disabling routing controls, to help prevent unexpected outcomes.
    
    There are two types of safety rules: assertion rules and gating rules.
    
    Assertion rule: An assertion rule enforces that, when you change a routing control state, that a certain criteria is met. For example, the criteria might be that at least one routing control state is On after the transaction so that traffic continues to flow to at least one cell for the application. This ensures that you avoid a fail-open scenario.
    
    Gating rule: A gating rule lets you configure a gating routing control as an overall "on/off" switch for a group of routing controls. Or, you can configure more complex gating scenarios, for example by configuring multiple gating routing controls.
    
    For more information, see Safety rules in the Amazon Route 53 Application Recovery Controller Developer Guide.
    
    Parameters:
    
    createSafetyRuleRequest - The request body that you include when you create a safety rule.
    
    Returns:
    
    Result of the CreateSafetyRule operation returned by the service.
    
    Throws:
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - createSafetyRule
```
default CreateSafetyRuleResponse createSafetyRule(Consumer<CreateSafetyRuleRequest.Builder> createSafetyRuleRequest)
                                           throws ValidationException,
                                                  InternalServerException,
                                                  AwsServiceException,
                                                  SdkClientException,
                                                  Route53RecoveryControlConfigException
```
    Creates a safety rule in a control panel. Safety rules let you add safeguards around changing routing control states, and for enabling and disabling routing controls, to help prevent unexpected outcomes.
    
    There are two types of safety rules: assertion rules and gating rules.
    
    Assertion rule: An assertion rule enforces that, when you change a routing control state, that a certain criteria is met. For example, the criteria might be that at least one routing control state is On after the transaction so that traffic continues to flow to at least one cell for the application. This ensures that you avoid a fail-open scenario.
    
    Gating rule: A gating rule lets you configure a gating routing control as an overall "on/off" switch for a group of routing controls. Or, you can configure more complex gating scenarios, for example by configuring multiple gating routing controls.
    
    For more information, see Safety rules in the Amazon Route 53 Application Recovery Controller Developer Guide.
    
    This is a convenience which creates an instance of the CreateSafetyRuleRequest.Builder avoiding the need to create one manually via CreateSafetyRuleRequest.builder()
    
    Parameters:
    
    createSafetyRuleRequest - A Consumer that will call methods on CreateSafetyRuleRequest.Builder to create a request. The request body that you include when you create a safety rule.
    
    Returns:
    
    Result of the CreateSafetyRule operation returned by the service.
    
    Throws:
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteCluster
```
default DeleteClusterResponse deleteCluster(DeleteClusterRequest deleteClusterRequest)
                                     throws ValidationException,
                                            InternalServerException,
                                            AccessDeniedException,
                                            ResourceNotFoundException,
                                            ThrottlingException,
                                            ConflictException,
                                            AwsServiceException,
                                            SdkClientException,
                                            Route53RecoveryControlConfigException
```
    Delete a cluster.
    
    Parameters:
    
    deleteClusterRequest -
    
    Returns:
    
    Result of the DeleteCluster operation returned by the service.
    
    Throws:
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ConflictException - 409 response - ConflictException. You might be using a predefined variable.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteCluster
```
default DeleteClusterResponse deleteCluster(Consumer<DeleteClusterRequest.Builder> deleteClusterRequest)
                                     throws ValidationException,
                                            InternalServerException,
                                            AccessDeniedException,
                                            ResourceNotFoundException,
                                            ThrottlingException,
                                            ConflictException,
                                            AwsServiceException,
                                            SdkClientException,
                                            Route53RecoveryControlConfigException
```
    Delete a cluster.
    
    This is a convenience which creates an instance of the DeleteClusterRequest.Builder avoiding the need to create one manually via DeleteClusterRequest.builder()
    
    Parameters:
    
    deleteClusterRequest - A Consumer that will call methods on DeleteClusterRequest.Builder to create a request.
    
    Returns:
    
    Result of the DeleteCluster operation returned by the service.
    
    Throws:
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ConflictException - 409 response - ConflictException. You might be using a predefined variable.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteControlPanel
```
default DeleteControlPanelResponse deleteControlPanel(DeleteControlPanelRequest deleteControlPanelRequest)
                                               throws ValidationException,
                                                      InternalServerException,
                                                      AccessDeniedException,
                                                      ResourceNotFoundException,
                                                      ThrottlingException,
                                                      ConflictException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      Route53RecoveryControlConfigException
```
    Deletes a control panel.
    
    Parameters:
    
    deleteControlPanelRequest -
    
    Returns:
    
    Result of the DeleteControlPanel operation returned by the service.
    
    Throws:
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ConflictException - 409 response - ConflictException. You might be using a predefined variable.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteControlPanel
```
default DeleteControlPanelResponse deleteControlPanel(Consumer<DeleteControlPanelRequest.Builder> deleteControlPanelRequest)
                                               throws ValidationException,
                                                      InternalServerException,
                                                      AccessDeniedException,
                                                      ResourceNotFoundException,
                                                      ThrottlingException,
                                                      ConflictException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      Route53RecoveryControlConfigException
```
    Deletes a control panel.
    
    This is a convenience which creates an instance of the DeleteControlPanelRequest.Builder avoiding the need to create one manually via DeleteControlPanelRequest.builder()
    
    Parameters:
    
    deleteControlPanelRequest - A Consumer that will call methods on DeleteControlPanelRequest.Builder to create a request.
    
    Returns:
    
    Result of the DeleteControlPanel operation returned by the service.
    
    Throws:
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ConflictException - 409 response - ConflictException. You might be using a predefined variable.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteRoutingControl
```
default DeleteRoutingControlResponse deleteRoutingControl(DeleteRoutingControlRequest deleteRoutingControlRequest)
                                                   throws ValidationException,
                                                          InternalServerException,
                                                          AccessDeniedException,
                                                          ResourceNotFoundException,
                                                          ThrottlingException,
                                                          ConflictException,
                                                          AwsServiceException,
                                                          SdkClientException,
                                                          Route53RecoveryControlConfigException
```
    Deletes a routing control.
    
    Parameters:
    
    deleteRoutingControlRequest -
    
    Returns:
    
    Result of the DeleteRoutingControl operation returned by the service.
    
    Throws:
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ConflictException - 409 response - ConflictException. You might be using a predefined variable.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteRoutingControl
```
default DeleteRoutingControlResponse deleteRoutingControl(Consumer<DeleteRoutingControlRequest.Builder> deleteRoutingControlRequest)
                                                   throws ValidationException,
                                                          InternalServerException,
                                                          AccessDeniedException,
                                                          ResourceNotFoundException,
                                                          ThrottlingException,
                                                          ConflictException,
                                                          AwsServiceException,
                                                          SdkClientException,
                                                          Route53RecoveryControlConfigException
```
    Deletes a routing control.
    
    This is a convenience which creates an instance of the DeleteRoutingControlRequest.Builder avoiding the need to create one manually via DeleteRoutingControlRequest.builder()
    
    Parameters:
    
    deleteRoutingControlRequest - A Consumer that will call methods on DeleteRoutingControlRequest.Builder to create a request.
    
    Returns:
    
    Result of the DeleteRoutingControl operation returned by the service.
    
    Throws:
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ConflictException - 409 response - ConflictException. You might be using a predefined variable.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteSafetyRule
```
default DeleteSafetyRuleResponse deleteSafetyRule(DeleteSafetyRuleRequest deleteSafetyRuleRequest)
                                           throws ResourceNotFoundException,
                                                  ValidationException,
                                                  InternalServerException,
                                                  AwsServiceException,
                                                  SdkClientException,
                                                  Route53RecoveryControlConfigException
```
    Deletes a safety rule.
    />
    
    Parameters:
    
    deleteSafetyRuleRequest -
    
    Returns:
    
    Result of the DeleteSafetyRule operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - deleteSafetyRule
```
default DeleteSafetyRuleResponse deleteSafetyRule(Consumer<DeleteSafetyRuleRequest.Builder> deleteSafetyRuleRequest)
                                           throws ResourceNotFoundException,
                                                  ValidationException,
                                                  InternalServerException,
                                                  AwsServiceException,
                                                  SdkClientException,
                                                  Route53RecoveryControlConfigException
```
    Deletes a safety rule.
    />
    
    This is a convenience which creates an instance of the DeleteSafetyRuleRequest.Builder avoiding the need to create one manually via DeleteSafetyRuleRequest.builder()
    
    Parameters:
    
    deleteSafetyRuleRequest - A Consumer that will call methods on DeleteSafetyRuleRequest.Builder to create a request.
    
    Returns:
    
    Result of the DeleteSafetyRule operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeCluster
```
default DescribeClusterResponse describeCluster(DescribeClusterRequest describeClusterRequest)
                                         throws ValidationException,
                                                InternalServerException,
                                                AccessDeniedException,
                                                ResourceNotFoundException,
                                                ThrottlingException,
                                                ConflictException,
                                                AwsServiceException,
                                                SdkClientException,
                                                Route53RecoveryControlConfigException
```
    Display the details about a cluster. The response includes the cluster name, endpoints, status, and Amazon Resource Name (ARN).
    
    Parameters:
    
    describeClusterRequest -
    
    Returns:
    
    Result of the DescribeCluster operation returned by the service.
    
    Throws:
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ConflictException - 409 response - ConflictException. You might be using a predefined variable.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeCluster
```
default DescribeClusterResponse describeCluster(Consumer<DescribeClusterRequest.Builder> describeClusterRequest)
                                         throws ValidationException,
                                                InternalServerException,
                                                AccessDeniedException,
                                                ResourceNotFoundException,
                                                ThrottlingException,
                                                ConflictException,
                                                AwsServiceException,
                                                SdkClientException,
                                                Route53RecoveryControlConfigException
```
    Display the details about a cluster. The response includes the cluster name, endpoints, status, and Amazon Resource Name (ARN).
    
    This is a convenience which creates an instance of the DescribeClusterRequest.Builder avoiding the need to create one manually via DescribeClusterRequest.builder()
    
    Parameters:
    
    describeClusterRequest - A Consumer that will call methods on DescribeClusterRequest.Builder to create a request.
    
    Returns:
    
    Result of the DescribeCluster operation returned by the service.
    
    Throws:
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ConflictException - 409 response - ConflictException. You might be using a predefined variable.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeControlPanel
```
default DescribeControlPanelResponse describeControlPanel(DescribeControlPanelRequest describeControlPanelRequest)
                                                   throws ValidationException,
                                                          InternalServerException,
                                                          AccessDeniedException,
                                                          ResourceNotFoundException,
                                                          ThrottlingException,
                                                          ConflictException,
                                                          AwsServiceException,
                                                          SdkClientException,
                                                          Route53RecoveryControlConfigException
```
    Displays details about a control panel.
    
    Parameters:
    
    describeControlPanelRequest -
    
    Returns:
    
    Result of the DescribeControlPanel operation returned by the service.
    
    Throws:
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ConflictException - 409 response - ConflictException. You might be using a predefined variable.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeControlPanel
```
default DescribeControlPanelResponse describeControlPanel(Consumer<DescribeControlPanelRequest.Builder> describeControlPanelRequest)
                                                   throws ValidationException,
                                                          InternalServerException,
                                                          AccessDeniedException,
                                                          ResourceNotFoundException,
                                                          ThrottlingException,
                                                          ConflictException,
                                                          AwsServiceException,
                                                          SdkClientException,
                                                          Route53RecoveryControlConfigException
```
    Displays details about a control panel.
    
    This is a convenience which creates an instance of the DescribeControlPanelRequest.Builder avoiding the need to create one manually via DescribeControlPanelRequest.builder()
    
    Parameters:
    
    describeControlPanelRequest - A Consumer that will call methods on DescribeControlPanelRequest.Builder to create a request.
    
    Returns:
    
    Result of the DescribeControlPanel operation returned by the service.
    
    Throws:
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ConflictException - 409 response - ConflictException. You might be using a predefined variable.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeRoutingControl
```
default DescribeRoutingControlResponse describeRoutingControl(DescribeRoutingControlRequest describeRoutingControlRequest)
                                                       throws ValidationException,
                                                              InternalServerException,
                                                              AccessDeniedException,
                                                              ResourceNotFoundException,
                                                              ThrottlingException,
                                                              ConflictException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              Route53RecoveryControlConfigException
```
    Displays details about a routing control. A routing control has one of two states: ON and OFF. You can map the routing control state to the state of an Amazon Route 53 health check, which can be used to control routing.
    
    To get or update the routing control state, see the Recovery Cluster (data plane) API actions for Amazon Route 53 Application Recovery Controller.
    
    Parameters:
    
    describeRoutingControlRequest -
    
    Returns:
    
    Result of the DescribeRoutingControl operation returned by the service.
    
    Throws:
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ConflictException - 409 response - ConflictException. You might be using a predefined variable.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeRoutingControl
```
default DescribeRoutingControlResponse describeRoutingControl(Consumer<DescribeRoutingControlRequest.Builder> describeRoutingControlRequest)
                                                       throws ValidationException,
                                                              InternalServerException,
                                                              AccessDeniedException,
                                                              ResourceNotFoundException,
                                                              ThrottlingException,
                                                              ConflictException,
                                                              AwsServiceException,
                                                              SdkClientException,
                                                              Route53RecoveryControlConfigException
```
    Displays details about a routing control. A routing control has one of two states: ON and OFF. You can map the routing control state to the state of an Amazon Route 53 health check, which can be used to control routing.
    
    To get or update the routing control state, see the Recovery Cluster (data plane) API actions for Amazon Route 53 Application Recovery Controller.
    
    This is a convenience which creates an instance of the DescribeRoutingControlRequest.Builder avoiding the need to create one manually via DescribeRoutingControlRequest.builder()
    
    Parameters:
    
    describeRoutingControlRequest - A Consumer that will call methods on DescribeRoutingControlRequest.Builder to create a request.
    
    Returns:
    
    Result of the DescribeRoutingControl operation returned by the service.
    
    Throws:
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ConflictException - 409 response - ConflictException. You might be using a predefined variable.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeSafetyRule
```
default DescribeSafetyRuleResponse describeSafetyRule(DescribeSafetyRuleRequest describeSafetyRuleRequest)
                                               throws ValidationException,
                                                      ResourceNotFoundException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      Route53RecoveryControlConfigException
```
    Returns information about a safety rule.
    
    Parameters:
    
    describeSafetyRuleRequest -
    
    Returns:
    
    Result of the DescribeSafetyRule operation returned by the service.
    
    Throws:
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - describeSafetyRule
```
default DescribeSafetyRuleResponse describeSafetyRule(Consumer<DescribeSafetyRuleRequest.Builder> describeSafetyRuleRequest)
                                               throws ValidationException,
                                                      ResourceNotFoundException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      Route53RecoveryControlConfigException
```
    Returns information about a safety rule.
    
    This is a convenience which creates an instance of the DescribeSafetyRuleRequest.Builder avoiding the need to create one manually via DescribeSafetyRuleRequest.builder()
    
    Parameters:
    
    describeSafetyRuleRequest - A Consumer that will call methods on DescribeSafetyRuleRequest.Builder to create a request.
    
    Returns:
    
    Result of the DescribeSafetyRule operation returned by the service.
    
    Throws:
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getResourcePolicy
```
default GetResourcePolicyResponse getResourcePolicy(GetResourcePolicyRequest getResourcePolicyRequest)
                                             throws ResourceNotFoundException,
                                                    InternalServerException,
                                                    AwsServiceException,
                                                    SdkClientException,
                                                    Route53RecoveryControlConfigException
```
    Get information about the resource policy for a cluster.
    
    Parameters:
    
    getResourcePolicyRequest -
    
    Returns:
    
    Result of the GetResourcePolicy operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - getResourcePolicy
```
default GetResourcePolicyResponse getResourcePolicy(Consumer<GetResourcePolicyRequest.Builder> getResourcePolicyRequest)
                                             throws ResourceNotFoundException,
                                                    InternalServerException,
                                                    AwsServiceException,
                                                    SdkClientException,
                                                    Route53RecoveryControlConfigException
```
    Get information about the resource policy for a cluster.
    
    This is a convenience which creates an instance of the GetResourcePolicyRequest.Builder avoiding the need to create one manually via GetResourcePolicyRequest.builder()
    
    Parameters:
    
    getResourcePolicyRequest - A Consumer that will call methods on GetResourcePolicyRequest.Builder to create a request.
    
    Returns:
    
    Result of the GetResourcePolicy operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAssociatedRoute53HealthChecks
```
default ListAssociatedRoute53HealthChecksResponse listAssociatedRoute53HealthChecks(ListAssociatedRoute53HealthChecksRequest listAssociatedRoute53HealthChecksRequest)
                                                                             throws ResourceNotFoundException,
                                                                                    ValidationException,
                                                                                    InternalServerException,
                                                                                    AwsServiceException,
                                                                                    SdkClientException,
                                                                                    Route53RecoveryControlConfigException
```
    Returns an array of all Amazon Route 53 health checks associated with a specific routing control.
    
    Parameters:
    
    listAssociatedRoute53HealthChecksRequest -
    
    Returns:
    
    Result of the ListAssociatedRoute53HealthChecks operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAssociatedRoute53HealthChecks
```
default ListAssociatedRoute53HealthChecksResponse listAssociatedRoute53HealthChecks(Consumer<ListAssociatedRoute53HealthChecksRequest.Builder> listAssociatedRoute53HealthChecksRequest)
                                                                             throws ResourceNotFoundException,
                                                                                    ValidationException,
                                                                                    InternalServerException,
                                                                                    AwsServiceException,
                                                                                    SdkClientException,
                                                                                    Route53RecoveryControlConfigException
```
    Returns an array of all Amazon Route 53 health checks associated with a specific routing control.
    
    This is a convenience which creates an instance of the ListAssociatedRoute53HealthChecksRequest.Builder avoiding the need to create one manually via ListAssociatedRoute53HealthChecksRequest.builder()
    
    Parameters:
    
    listAssociatedRoute53HealthChecksRequest - A Consumer that will call methods on ListAssociatedRoute53HealthChecksRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListAssociatedRoute53HealthChecks operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAssociatedRoute53HealthChecksPaginator
```
default ListAssociatedRoute53HealthChecksIterable listAssociatedRoute53HealthChecksPaginator(ListAssociatedRoute53HealthChecksRequest listAssociatedRoute53HealthChecksRequest)
                                                                                      throws ResourceNotFoundException,
                                                                                             ValidationException,
                                                                                             InternalServerException,
                                                                                             AwsServiceException,
                                                                                             SdkClientException,
                                                                                             Route53RecoveryControlConfigException
```
    This is a variant of listAssociatedRoute53HealthChecks(software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListAssociatedRoute53HealthChecksRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.route53recoverycontrolconfig.paginators.ListAssociatedRoute53HealthChecksIterable responses = client.listAssociatedRoute53HealthChecksPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.route53recoverycontrolconfig.paginators.ListAssociatedRoute53HealthChecksIterable responses = client .listAssociatedRoute53HealthChecksPaginator(request); for (software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListAssociatedRoute53HealthChecksResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.route53recoverycontrolconfig.paginators.ListAssociatedRoute53HealthChecksIterable responses = client.listAssociatedRoute53HealthChecksPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listAssociatedRoute53HealthChecks(software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListAssociatedRoute53HealthChecksRequest) operation.
    Parameters:
    
    listAssociatedRoute53HealthChecksRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listAssociatedRoute53HealthChecksPaginator
```
default ListAssociatedRoute53HealthChecksIterable listAssociatedRoute53HealthChecksPaginator(Consumer<ListAssociatedRoute53HealthChecksRequest.Builder> listAssociatedRoute53HealthChecksRequest)
                                                                                      throws ResourceNotFoundException,
                                                                                             ValidationException,
                                                                                             InternalServerException,
                                                                                             AwsServiceException,
                                                                                             SdkClientException,
                                                                                             Route53RecoveryControlConfigException
```
    This is a variant of listAssociatedRoute53HealthChecks(software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListAssociatedRoute53HealthChecksRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.route53recoverycontrolconfig.paginators.ListAssociatedRoute53HealthChecksIterable responses = client.listAssociatedRoute53HealthChecksPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.route53recoverycontrolconfig.paginators.ListAssociatedRoute53HealthChecksIterable responses = client .listAssociatedRoute53HealthChecksPaginator(request); for (software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListAssociatedRoute53HealthChecksResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.route53recoverycontrolconfig.paginators.ListAssociatedRoute53HealthChecksIterable responses = client.listAssociatedRoute53HealthChecksPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listAssociatedRoute53HealthChecks(software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListAssociatedRoute53HealthChecksRequest) operation.
    
    This is a convenience which creates an instance of the ListAssociatedRoute53HealthChecksRequest.Builder avoiding the need to create one manually via ListAssociatedRoute53HealthChecksRequest.builder()
    Parameters:
    
    listAssociatedRoute53HealthChecksRequest - A Consumer that will call methods on ListAssociatedRoute53HealthChecksRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listClusters
```
default ListClustersResponse listClusters(ListClustersRequest listClustersRequest)
                                   throws ResourceNotFoundException,
                                          ThrottlingException,
                                          ValidationException,
                                          InternalServerException,
                                          AccessDeniedException,
                                          AwsServiceException,
                                          SdkClientException,
                                          Route53RecoveryControlConfigException
```
    Returns an array of all the clusters in an account.
    
    Parameters:
    
    listClustersRequest -
    
    Returns:
    
    Result of the ListClusters operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listClusters
```
default ListClustersResponse listClusters(Consumer<ListClustersRequest.Builder> listClustersRequest)
                                   throws ResourceNotFoundException,
                                          ThrottlingException,
                                          ValidationException,
                                          InternalServerException,
                                          AccessDeniedException,
                                          AwsServiceException,
                                          SdkClientException,
                                          Route53RecoveryControlConfigException
```
    Returns an array of all the clusters in an account.
    
    This is a convenience which creates an instance of the ListClustersRequest.Builder avoiding the need to create one manually via ListClustersRequest.builder()
    
    Parameters:
    
    listClustersRequest - A Consumer that will call methods on ListClustersRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListClusters operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listClustersPaginator
```
default ListClustersIterable listClustersPaginator(ListClustersRequest listClustersRequest)
                                            throws ResourceNotFoundException,
                                                   ThrottlingException,
                                                   ValidationException,
                                                   InternalServerException,
                                                   AccessDeniedException,
                                                   AwsServiceException,
                                                   SdkClientException,
                                                   Route53RecoveryControlConfigException
```
    This is a variant of listClusters(software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListClustersRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.route53recoverycontrolconfig.paginators.ListClustersIterable responses = client.listClustersPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.route53recoverycontrolconfig.paginators.ListClustersIterable responses = client .listClustersPaginator(request); for (software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListClustersResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.route53recoverycontrolconfig.paginators.ListClustersIterable responses = client.listClustersPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listClusters(software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListClustersRequest) operation.
    Parameters:
    
    listClustersRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listClustersPaginator
```
default ListClustersIterable listClustersPaginator(Consumer<ListClustersRequest.Builder> listClustersRequest)
                                            throws ResourceNotFoundException,
                                                   ThrottlingException,
                                                   ValidationException,
                                                   InternalServerException,
                                                   AccessDeniedException,
                                                   AwsServiceException,
                                                   SdkClientException,
                                                   Route53RecoveryControlConfigException
```
    This is a variant of listClusters(software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListClustersRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.route53recoverycontrolconfig.paginators.ListClustersIterable responses = client.listClustersPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.route53recoverycontrolconfig.paginators.ListClustersIterable responses = client .listClustersPaginator(request); for (software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListClustersResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.route53recoverycontrolconfig.paginators.ListClustersIterable responses = client.listClustersPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listClusters(software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListClustersRequest) operation.
    
    This is a convenience which creates an instance of the ListClustersRequest.Builder avoiding the need to create one manually via ListClustersRequest.builder()
    Parameters:
    
    listClustersRequest - A Consumer that will call methods on ListClustersRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listControlPanels
```
default ListControlPanelsResponse listControlPanels(ListControlPanelsRequest listControlPanelsRequest)
                                             throws ResourceNotFoundException,
                                                    ThrottlingException,
                                                    ValidationException,
                                                    InternalServerException,
                                                    AccessDeniedException,
                                                    AwsServiceException,
                                                    SdkClientException,
                                                    Route53RecoveryControlConfigException
```
    Returns an array of control panels in an account or in a cluster.
    
    Parameters:
    
    listControlPanelsRequest -
    
    Returns:
    
    Result of the ListControlPanels operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listControlPanels
```
default ListControlPanelsResponse listControlPanels(Consumer<ListControlPanelsRequest.Builder> listControlPanelsRequest)
                                             throws ResourceNotFoundException,
                                                    ThrottlingException,
                                                    ValidationException,
                                                    InternalServerException,
                                                    AccessDeniedException,
                                                    AwsServiceException,
                                                    SdkClientException,
                                                    Route53RecoveryControlConfigException
```
    Returns an array of control panels in an account or in a cluster.
    
    This is a convenience which creates an instance of the ListControlPanelsRequest.Builder avoiding the need to create one manually via ListControlPanelsRequest.builder()
    
    Parameters:
    
    listControlPanelsRequest - A Consumer that will call methods on ListControlPanelsRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListControlPanels operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listControlPanelsPaginator
```
default ListControlPanelsIterable listControlPanelsPaginator(ListControlPanelsRequest listControlPanelsRequest)
                                                      throws ResourceNotFoundException,
                                                             ThrottlingException,
                                                             ValidationException,
                                                             InternalServerException,
                                                             AccessDeniedException,
                                                             AwsServiceException,
                                                             SdkClientException,
                                                             Route53RecoveryControlConfigException
```
    This is a variant of listControlPanels(software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListControlPanelsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.route53recoverycontrolconfig.paginators.ListControlPanelsIterable responses = client.listControlPanelsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.route53recoverycontrolconfig.paginators.ListControlPanelsIterable responses = client .listControlPanelsPaginator(request); for (software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListControlPanelsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.route53recoverycontrolconfig.paginators.ListControlPanelsIterable responses = client.listControlPanelsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listControlPanels(software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListControlPanelsRequest) operation.
    Parameters:
    
    listControlPanelsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listControlPanelsPaginator
```
default ListControlPanelsIterable listControlPanelsPaginator(Consumer<ListControlPanelsRequest.Builder> listControlPanelsRequest)
                                                      throws ResourceNotFoundException,
                                                             ThrottlingException,
                                                             ValidationException,
                                                             InternalServerException,
                                                             AccessDeniedException,
                                                             AwsServiceException,
                                                             SdkClientException,
                                                             Route53RecoveryControlConfigException
```
    This is a variant of listControlPanels(software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListControlPanelsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.route53recoverycontrolconfig.paginators.ListControlPanelsIterable responses = client.listControlPanelsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.route53recoverycontrolconfig.paginators.ListControlPanelsIterable responses = client .listControlPanelsPaginator(request); for (software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListControlPanelsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.route53recoverycontrolconfig.paginators.ListControlPanelsIterable responses = client.listControlPanelsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listControlPanels(software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListControlPanelsRequest) operation.
    
    This is a convenience which creates an instance of the ListControlPanelsRequest.Builder avoiding the need to create one manually via ListControlPanelsRequest.builder()
    Parameters:
    
    listControlPanelsRequest - A Consumer that will call methods on ListControlPanelsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listRoutingControls
```
default ListRoutingControlsResponse listRoutingControls(ListRoutingControlsRequest listRoutingControlsRequest)
                                                 throws ResourceNotFoundException,
                                                        ThrottlingException,
                                                        ValidationException,
                                                        InternalServerException,
                                                        AccessDeniedException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        Route53RecoveryControlConfigException
```
    Returns an array of routing controls for a control panel. A routing control is an Amazon Route 53 Application Recovery Controller construct that has one of two states: ON and OFF. You can map the routing control state to the state of an Amazon Route 53 health check, which can be used to control routing.
    
    Parameters:
    
    listRoutingControlsRequest -
    
    Returns:
    
    Result of the ListRoutingControls operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listRoutingControls
```
default ListRoutingControlsResponse listRoutingControls(Consumer<ListRoutingControlsRequest.Builder> listRoutingControlsRequest)
                                                 throws ResourceNotFoundException,
                                                        ThrottlingException,
                                                        ValidationException,
                                                        InternalServerException,
                                                        AccessDeniedException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        Route53RecoveryControlConfigException
```
    Returns an array of routing controls for a control panel. A routing control is an Amazon Route 53 Application Recovery Controller construct that has one of two states: ON and OFF. You can map the routing control state to the state of an Amazon Route 53 health check, which can be used to control routing.
    
    This is a convenience which creates an instance of the ListRoutingControlsRequest.Builder avoiding the need to create one manually via ListRoutingControlsRequest.builder()
    
    Parameters:
    
    listRoutingControlsRequest - A Consumer that will call methods on ListRoutingControlsRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListRoutingControls operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listRoutingControlsPaginator
```
default ListRoutingControlsIterable listRoutingControlsPaginator(ListRoutingControlsRequest listRoutingControlsRequest)
                                                          throws ResourceNotFoundException,
                                                                 ThrottlingException,
                                                                 ValidationException,
                                                                 InternalServerException,
                                                                 AccessDeniedException,
                                                                 AwsServiceException,
                                                                 SdkClientException,
                                                                 Route53RecoveryControlConfigException
```
    This is a variant of listRoutingControls(software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListRoutingControlsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.route53recoverycontrolconfig.paginators.ListRoutingControlsIterable responses = client.listRoutingControlsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.route53recoverycontrolconfig.paginators.ListRoutingControlsIterable responses = client .listRoutingControlsPaginator(request); for (software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListRoutingControlsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.route53recoverycontrolconfig.paginators.ListRoutingControlsIterable responses = client.listRoutingControlsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listRoutingControls(software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListRoutingControlsRequest) operation.
    Parameters:
    
    listRoutingControlsRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listRoutingControlsPaginator
```
default ListRoutingControlsIterable listRoutingControlsPaginator(Consumer<ListRoutingControlsRequest.Builder> listRoutingControlsRequest)
                                                          throws ResourceNotFoundException,
                                                                 ThrottlingException,
                                                                 ValidationException,
                                                                 InternalServerException,
                                                                 AccessDeniedException,
                                                                 AwsServiceException,
                                                                 SdkClientException,
                                                                 Route53RecoveryControlConfigException
```
    This is a variant of listRoutingControls(software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListRoutingControlsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.route53recoverycontrolconfig.paginators.ListRoutingControlsIterable responses = client.listRoutingControlsPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.route53recoverycontrolconfig.paginators.ListRoutingControlsIterable responses = client .listRoutingControlsPaginator(request); for (software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListRoutingControlsResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.route53recoverycontrolconfig.paginators.ListRoutingControlsIterable responses = client.listRoutingControlsPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listRoutingControls(software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListRoutingControlsRequest) operation.
    
    This is a convenience which creates an instance of the ListRoutingControlsRequest.Builder avoiding the need to create one manually via ListRoutingControlsRequest.builder()
    Parameters:
    
    listRoutingControlsRequest - A Consumer that will call methods on ListRoutingControlsRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listSafetyRules
```
default ListSafetyRulesResponse listSafetyRules(ListSafetyRulesRequest listSafetyRulesRequest)
                                         throws ResourceNotFoundException,
                                                ThrottlingException,
                                                ValidationException,
                                                InternalServerException,
                                                AccessDeniedException,
                                                AwsServiceException,
                                                SdkClientException,
                                                Route53RecoveryControlConfigException
```
    List the safety rules (the assertion rules and gating rules) that you've defined for the routing controls in a control panel.
    
    Parameters:
    
    listSafetyRulesRequest -
    
    Returns:
    
    Result of the ListSafetyRules operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listSafetyRules
```
default ListSafetyRulesResponse listSafetyRules(Consumer<ListSafetyRulesRequest.Builder> listSafetyRulesRequest)
                                         throws ResourceNotFoundException,
                                                ThrottlingException,
                                                ValidationException,
                                                InternalServerException,
                                                AccessDeniedException,
                                                AwsServiceException,
                                                SdkClientException,
                                                Route53RecoveryControlConfigException
```
    List the safety rules (the assertion rules and gating rules) that you've defined for the routing controls in a control panel.
    
    This is a convenience which creates an instance of the ListSafetyRulesRequest.Builder avoiding the need to create one manually via ListSafetyRulesRequest.builder()
    
    Parameters:
    
    listSafetyRulesRequest - A Consumer that will call methods on ListSafetyRulesRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListSafetyRules operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listSafetyRulesPaginator
```
default ListSafetyRulesIterable listSafetyRulesPaginator(ListSafetyRulesRequest listSafetyRulesRequest)
                                                  throws ResourceNotFoundException,
                                                         ThrottlingException,
                                                         ValidationException,
                                                         InternalServerException,
                                                         AccessDeniedException,
                                                         AwsServiceException,
                                                         SdkClientException,
                                                         Route53RecoveryControlConfigException
```
    This is a variant of listSafetyRules(software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListSafetyRulesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.route53recoverycontrolconfig.paginators.ListSafetyRulesIterable responses = client.listSafetyRulesPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.route53recoverycontrolconfig.paginators.ListSafetyRulesIterable responses = client .listSafetyRulesPaginator(request); for (software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListSafetyRulesResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.route53recoverycontrolconfig.paginators.ListSafetyRulesIterable responses = client.listSafetyRulesPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listSafetyRules(software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListSafetyRulesRequest) operation.
    Parameters:
    
    listSafetyRulesRequest -
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listSafetyRulesPaginator
```
default ListSafetyRulesIterable listSafetyRulesPaginator(Consumer<ListSafetyRulesRequest.Builder> listSafetyRulesRequest)
                                                  throws ResourceNotFoundException,
                                                         ThrottlingException,
                                                         ValidationException,
                                                         InternalServerException,
                                                         AccessDeniedException,
                                                         AwsServiceException,
                                                         SdkClientException,
                                                         Route53RecoveryControlConfigException
```
    This is a variant of listSafetyRules(software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListSafetyRulesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
    
    When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
    
    The following are few ways to iterate through the response pages:
    1) Using a Stream
    software.amazon.awssdk.services.route53recoverycontrolconfig.paginators.ListSafetyRulesIterable responses = client.listSafetyRulesPaginator(request); responses.stream().forEach(....);
    2) Using For loop
    { @code software.amazon.awssdk.services.route53recoverycontrolconfig.paginators.ListSafetyRulesIterable responses = client .listSafetyRulesPaginator(request); for (software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListSafetyRulesResponse response : responses) { // do something; } }
    3) Use iterator directly
    software.amazon.awssdk.services.route53recoverycontrolconfig.paginators.ListSafetyRulesIterable responses = client.listSafetyRulesPaginator(request); responses.iterator().forEachRemaining(....);
    
    Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
    
    Note: If you prefer to have control on service calls, use the listSafetyRules(software.amazon.awssdk.services.route53recoverycontrolconfig.model.ListSafetyRulesRequest) operation.
    
    This is a convenience which creates an instance of the ListSafetyRulesRequest.Builder avoiding the need to create one manually via ListSafetyRulesRequest.builder()
    Parameters:
    
    listSafetyRulesRequest - A Consumer that will call methods on ListSafetyRulesRequest.Builder to create a request.
    
    Returns:
    
    A custom iterable that can be used to iterate through all the response pages.
    
    Throws:
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listTagsForResource
```
default ListTagsForResourceResponse listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)
                                                 throws ResourceNotFoundException,
                                                        ValidationException,
                                                        InternalServerException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        Route53RecoveryControlConfigException
```
    Lists the tags for a resource.
    
    Parameters:
    
    listTagsForResourceRequest -
    
    Returns:
    
    Result of the ListTagsForResource operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - listTagsForResource
```
default ListTagsForResourceResponse listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)
                                                 throws ResourceNotFoundException,
                                                        ValidationException,
                                                        InternalServerException,
                                                        AwsServiceException,
                                                        SdkClientException,
                                                        Route53RecoveryControlConfigException
```
    Lists the tags for a resource.
    
    This is a convenience which creates an instance of the ListTagsForResourceRequest.Builder avoiding the need to create one manually via ListTagsForResourceRequest.builder()
    
    Parameters:
    
    listTagsForResourceRequest - A Consumer that will call methods on ListTagsForResourceRequest.Builder to create a request.
    
    Returns:
    
    Result of the ListTagsForResource operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - tagResource
```
default TagResourceResponse tagResource(TagResourceRequest tagResourceRequest)
                                 throws ResourceNotFoundException,
                                        ValidationException,
                                        InternalServerException,
                                        AwsServiceException,
                                        SdkClientException,
                                        Route53RecoveryControlConfigException
```
    Adds a tag to a resource.
    
    Parameters:
    
    tagResourceRequest - Request of adding tag to the resource
    
    Returns:
    
    Result of the TagResource operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - tagResource
```
default TagResourceResponse tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)
                                 throws ResourceNotFoundException,
                                        ValidationException,
                                        InternalServerException,
                                        AwsServiceException,
                                        SdkClientException,
                                        Route53RecoveryControlConfigException
```
    Adds a tag to a resource.
    
    This is a convenience which creates an instance of the TagResourceRequest.Builder avoiding the need to create one manually via TagResourceRequest.builder()
    
    Parameters:
    
    tagResourceRequest - A Consumer that will call methods on TagResourceRequest.Builder to create a request. Request of adding tag to the resource
    
    Returns:
    
    Result of the TagResource operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - untagResource
```
default UntagResourceResponse untagResource(UntagResourceRequest untagResourceRequest)
                                     throws ResourceNotFoundException,
                                            ValidationException,
                                            InternalServerException,
                                            AwsServiceException,
                                            SdkClientException,
                                            Route53RecoveryControlConfigException
```
    Removes a tag from a resource.
    
    Parameters:
    
    untagResourceRequest -
    
    Returns:
    
    Result of the UntagResource operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - untagResource
```
default UntagResourceResponse untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)
                                     throws ResourceNotFoundException,
                                            ValidationException,
                                            InternalServerException,
                                            AwsServiceException,
                                            SdkClientException,
                                            Route53RecoveryControlConfigException
```
    Removes a tag from a resource.
    
    This is a convenience which creates an instance of the UntagResourceRequest.Builder avoiding the need to create one manually via UntagResourceRequest.builder()
    
    Parameters:
    
    untagResourceRequest - A Consumer that will call methods on UntagResourceRequest.Builder to create a request.
    
    Returns:
    
    Result of the UntagResource operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateControlPanel
```
default UpdateControlPanelResponse updateControlPanel(UpdateControlPanelRequest updateControlPanelRequest)
                                               throws ValidationException,
                                                      InternalServerException,
                                                      AccessDeniedException,
                                                      ResourceNotFoundException,
                                                      ThrottlingException,
                                                      ConflictException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      Route53RecoveryControlConfigException
```
    Updates a control panel. The only update you can make to a control panel is to change the name of the control panel.
    
    Parameters:
    
    updateControlPanelRequest - The details of the control panel that you're updating.
    
    Returns:
    
    Result of the UpdateControlPanel operation returned by the service.
    
    Throws:
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ConflictException - 409 response - ConflictException. You might be using a predefined variable.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateControlPanel
```
default UpdateControlPanelResponse updateControlPanel(Consumer<UpdateControlPanelRequest.Builder> updateControlPanelRequest)
                                               throws ValidationException,
                                                      InternalServerException,
                                                      AccessDeniedException,
                                                      ResourceNotFoundException,
                                                      ThrottlingException,
                                                      ConflictException,
                                                      AwsServiceException,
                                                      SdkClientException,
                                                      Route53RecoveryControlConfigException
```
    Updates a control panel. The only update you can make to a control panel is to change the name of the control panel.
    
    This is a convenience which creates an instance of the UpdateControlPanelRequest.Builder avoiding the need to create one manually via UpdateControlPanelRequest.builder()
    
    Parameters:
    
    updateControlPanelRequest - A Consumer that will call methods on UpdateControlPanelRequest.Builder to create a request. The details of the control panel that you're updating.
    
    Returns:
    
    Result of the UpdateControlPanel operation returned by the service.
    
    Throws:
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ConflictException - 409 response - ConflictException. You might be using a predefined variable.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateRoutingControl
```
default UpdateRoutingControlResponse updateRoutingControl(UpdateRoutingControlRequest updateRoutingControlRequest)
                                                   throws ValidationException,
                                                          InternalServerException,
                                                          AccessDeniedException,
                                                          ResourceNotFoundException,
                                                          ThrottlingException,
                                                          ConflictException,
                                                          AwsServiceException,
                                                          SdkClientException,
                                                          Route53RecoveryControlConfigException
```
    Updates a routing control. You can only update the name of the routing control. To get or update the routing control state, see the Recovery Cluster (data plane) API actions for Amazon Route 53 Application Recovery Controller.
    
    Parameters:
    
    updateRoutingControlRequest - The details of the routing control that you're updating.
    
    Returns:
    
    Result of the UpdateRoutingControl operation returned by the service.
    
    Throws:
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ConflictException - 409 response - ConflictException. You might be using a predefined variable.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateRoutingControl
```
default UpdateRoutingControlResponse updateRoutingControl(Consumer<UpdateRoutingControlRequest.Builder> updateRoutingControlRequest)
                                                   throws ValidationException,
                                                          InternalServerException,
                                                          AccessDeniedException,
                                                          ResourceNotFoundException,
                                                          ThrottlingException,
                                                          ConflictException,
                                                          AwsServiceException,
                                                          SdkClientException,
                                                          Route53RecoveryControlConfigException
```
    Updates a routing control. You can only update the name of the routing control. To get or update the routing control state, see the Recovery Cluster (data plane) API actions for Amazon Route 53 Application Recovery Controller.
    
    This is a convenience which creates an instance of the UpdateRoutingControlRequest.Builder avoiding the need to create one manually via UpdateRoutingControlRequest.builder()
    
    Parameters:
    
    updateRoutingControlRequest - A Consumer that will call methods on UpdateRoutingControlRequest.Builder to create a request. The details of the routing control that you're updating.
    
    Returns:
    
    Result of the UpdateRoutingControl operation returned by the service.
    
    Throws:
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    AccessDeniedException - 403 response - AccessDeniedException. You do not have sufficient access to perform this action.
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ThrottlingException - 429 response - LimitExceededException or TooManyRequestsException.
    
    ConflictException - 409 response - ConflictException. You might be using a predefined variable.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateSafetyRule
```
default UpdateSafetyRuleResponse updateSafetyRule(UpdateSafetyRuleRequest updateSafetyRuleRequest)
                                           throws ResourceNotFoundException,
                                                  ValidationException,
                                                  InternalServerException,
                                                  AwsServiceException,
                                                  SdkClientException,
                                                  Route53RecoveryControlConfigException
```
    Update a safety rule (an assertion rule or gating rule). You can only update the name and the waiting period for a safety rule. To make other updates, delete the safety rule and create a new one.
    
    Parameters:
    
    updateSafetyRuleRequest - A rule that you add to Application Recovery Controller to ensure that recovery actions don't accidentally impair your application's availability.
    
    Returns:
    
    Result of the UpdateSafetyRule operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - updateSafetyRule
```
default UpdateSafetyRuleResponse updateSafetyRule(Consumer<UpdateSafetyRuleRequest.Builder> updateSafetyRuleRequest)
                                           throws ResourceNotFoundException,
                                                  ValidationException,
                                                  InternalServerException,
                                                  AwsServiceException,
                                                  SdkClientException,
                                                  Route53RecoveryControlConfigException
```
    Update a safety rule (an assertion rule or gating rule). You can only update the name and the waiting period for a safety rule. To make other updates, delete the safety rule and create a new one.
    
    This is a convenience which creates an instance of the UpdateSafetyRuleRequest.Builder avoiding the need to create one manually via UpdateSafetyRuleRequest.builder()
    
    Parameters:
    
    updateSafetyRuleRequest - A Consumer that will call methods on UpdateSafetyRuleRequest.Builder to create a request. A rule that you add to Application Recovery Controller to ensure that recovery actions don't accidentally impair your application's availability.
    
    Returns:
    
    Result of the UpdateSafetyRule operation returned by the service.
    
    Throws:
    
    ResourceNotFoundException - 404 response - MalformedQueryString. The query string contains a syntax error or resource not found.
    
    ValidationException - 400 response - Multiple causes. For example, you might have a malformed query string and input parameter might be out of range, or you used parameters together incorrectly.
    
    InternalServerException - 500 response - InternalServiceError. Temporary service error. Retry the request.
    
    SdkException - Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
    
    SdkClientException - If any client side error occurs such as an IO related failure, failure to get credentials, etc.
    
    Route53RecoveryControlConfigException - Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
    
    AwsServiceException
    
    See Also:
    
    AWS API Documentation
  - waiter
```
default Route53RecoveryControlConfigWaiter waiter()
```
    Create an instance of Route53RecoveryControlConfigWaiter using this client.
    Waiters created via this method are managed by the SDK and resources will be released when the service client is closed.
    
    Returns:
    
    an instance of Route53RecoveryControlConfigWaiter
  - create
```
static Route53RecoveryControlConfigClient create()
```
    Create a Route53RecoveryControlConfigClient with the region loaded from the DefaultAwsRegionProviderChain and credentials loaded from the DefaultCredentialsProvider.
  - builder
```
static Route53RecoveryControlConfigClientBuilder builder()
```
    Create a builder that can be used to configure and create a Route53RecoveryControlConfigClient.
  - serviceMetadata
```
static ServiceMetadata serviceMetadata()
```
  - serviceClientConfiguration
```
default Route53RecoveryControlConfigServiceClientConfiguration serviceClientConfiguration()
```
    Specified by:
    
    serviceClientConfiguration in interface AwsClient
    
    Specified by:
    
    serviceClientConfiguration in interface SdkClient

Modifier and Type	Field	Description
`static String`	`SERVICE_METADATA_ID`	Value for looking up the service's metadata from the `ServiceMetadataProvider`.
`static String`	`SERVICE_NAME`

Interface Route53RecoveryControlConfigClient

Field Summary

Method Summary

Methods inherited from interface software.amazon.awssdk.utils.SdkAutoCloseable

Methods inherited from interface software.amazon.awssdk.core.SdkClient

Field Detail

SERVICE_NAME

SERVICE_METADATA_ID

Method Detail

createCluster

createCluster

createControlPanel

createControlPanel

createRoutingControl

createRoutingControl

createSafetyRule

createSafetyRule

deleteCluster

deleteCluster

deleteControlPanel

deleteControlPanel

deleteRoutingControl

deleteRoutingControl

deleteSafetyRule

deleteSafetyRule

describeCluster

describeCluster

describeControlPanel

describeControlPanel

describeRoutingControl

describeRoutingControl

describeSafetyRule

describeSafetyRule

getResourcePolicy

getResourcePolicy

listAssociatedRoute53HealthChecks

listAssociatedRoute53HealthChecks

listAssociatedRoute53HealthChecksPaginator

listAssociatedRoute53HealthChecksPaginator

listClusters

listClusters

listClustersPaginator

listClustersPaginator

listControlPanels

listControlPanels

listControlPanelsPaginator

listControlPanelsPaginator

listRoutingControls

listRoutingControls

listRoutingControlsPaginator

listRoutingControlsPaginator

listSafetyRules

listSafetyRules

listSafetyRulesPaginator

listSafetyRulesPaginator

listTagsForResource

listTagsForResource

tagResource

tagResource

untagResource

untagResource

updateControlPanel

updateControlPanel

updateRoutingControl

updateRoutingControl

updateSafetyRule

updateSafetyRule

waiter

create

builder

serviceMetadata

serviceClientConfiguration