Package software.amazon.awssdk.services.route53resolver.model

Interface ResolverEndpoint.Builder

    • Method Detail

      • id

        ResolverEndpoint.Builder id​(String id)

        The ID of the Resolver endpoint.

        Parameters:
        id - The ID of the Resolver endpoint.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • creatorRequestId

        ResolverEndpoint.Builder creatorRequestId​(String creatorRequestId)

        A unique string that identifies the request that created the Resolver endpoint. The CreatorRequestId allows failed requests to be retried without the risk of running the operation twice.

        Parameters:
        creatorRequestId - A unique string that identifies the request that created the Resolver endpoint. The CreatorRequestId allows failed requests to be retried without the risk of running the operation twice.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • arn

        ResolverEndpoint.Builder arn​(String arn)

        The ARN (Amazon Resource Name) for the Resolver endpoint.

        Parameters:
        arn - The ARN (Amazon Resource Name) for the Resolver endpoint.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • name

        ResolverEndpoint.Builder name​(String name)

        The name that you assigned to the Resolver endpoint when you submitted a CreateResolverEndpoint request.

        Parameters:
        name - The name that you assigned to the Resolver endpoint when you submitted a CreateResolverEndpoint request.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • securityGroupIds

        ResolverEndpoint.Builder securityGroupIds​(Collection<String> securityGroupIds)

        The ID of one or more security groups that control access to this VPC. The security group must include one or more inbound rules (for inbound endpoints) or outbound rules (for outbound endpoints). Inbound and outbound rules must allow TCP and UDP access. For inbound access, open port 53. For outbound access, open the port that you're using for DNS queries on your network.

        Parameters:
        securityGroupIds - The ID of one or more security groups that control access to this VPC. The security group must include one or more inbound rules (for inbound endpoints) or outbound rules (for outbound endpoints). Inbound and outbound rules must allow TCP and UDP access. For inbound access, open port 53. For outbound access, open the port that you're using for DNS queries on your network.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • securityGroupIds

        ResolverEndpoint.Builder securityGroupIds​(String... securityGroupIds)

        The ID of one or more security groups that control access to this VPC. The security group must include one or more inbound rules (for inbound endpoints) or outbound rules (for outbound endpoints). Inbound and outbound rules must allow TCP and UDP access. For inbound access, open port 53. For outbound access, open the port that you're using for DNS queries on your network.

        Parameters:
        securityGroupIds - The ID of one or more security groups that control access to this VPC. The security group must include one or more inbound rules (for inbound endpoints) or outbound rules (for outbound endpoints). Inbound and outbound rules must allow TCP and UDP access. For inbound access, open port 53. For outbound access, open the port that you're using for DNS queries on your network.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • direction

        ResolverEndpoint.Builder direction​(String direction)

        Indicates whether the Resolver endpoint allows inbound or outbound DNS queries:

        • INBOUND: allows DNS queries to your VPC from your network

        • OUTBOUND: allows DNS queries from your VPC to your network

        Parameters:
        direction - Indicates whether the Resolver endpoint allows inbound or outbound DNS queries:

        • INBOUND: allows DNS queries to your VPC from your network

        • OUTBOUND: allows DNS queries from your VPC to your network

        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        ResolverEndpointDirection, ResolverEndpointDirection

      • direction

        ResolverEndpoint.Builder direction​(ResolverEndpointDirection direction)

        Indicates whether the Resolver endpoint allows inbound or outbound DNS queries:

        • INBOUND: allows DNS queries to your VPC from your network

        • OUTBOUND: allows DNS queries from your VPC to your network

        Parameters:
        direction - Indicates whether the Resolver endpoint allows inbound or outbound DNS queries:

        • INBOUND: allows DNS queries to your VPC from your network

        • OUTBOUND: allows DNS queries from your VPC to your network

        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        ResolverEndpointDirection, ResolverEndpointDirection

      • ipAddressCount

        ResolverEndpoint.Builder ipAddressCount​(Integer ipAddressCount)

        The number of IP addresses that the Resolver endpoint can use for DNS queries.

        Parameters:
        ipAddressCount - The number of IP addresses that the Resolver endpoint can use for DNS queries.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • hostVPCId

        ResolverEndpoint.Builder hostVPCId​(String hostVPCId)

        The ID of the VPC that you want to create the Resolver endpoint in.

        Parameters:
        hostVPCId - The ID of the VPC that you want to create the Resolver endpoint in.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • status

        ResolverEndpoint.Builder status​(String status)

        A code that specifies the current status of the Resolver endpoint. Valid values include the following:

        • CREATING: Resolver is creating and configuring one or more Amazon VPC network interfaces for this endpoint.

        • OPERATIONAL: The Amazon VPC network interfaces for this endpoint are correctly configured and able to pass inbound or outbound DNS queries between your network and Resolver.

        • UPDATING: Resolver is associating or disassociating one or more network interfaces with this endpoint.

        • AUTO_RECOVERING: Resolver is trying to recover one or more of the network interfaces that are associated with this endpoint. During the recovery process, the endpoint functions with limited capacity because of the limit on the number of DNS queries per IP address (per network interface). For the current limit, see Limits on Route 53 Resolver.

        • ACTION_NEEDED: This endpoint is unhealthy, and Resolver can't automatically recover it. To resolve the problem, we recommend that you check each IP address that you associated with the endpoint. For each IP address that isn't available, add another IP address and then delete the IP address that isn't available. (An endpoint must always include at least two IP addresses.) A status of ACTION_NEEDED can have a variety of causes. Here are two common causes:

          • One or more of the network interfaces that are associated with the endpoint were deleted using Amazon VPC.

          • The network interface couldn't be created for some reason that's outside the control of Resolver.

        • DELETING: Resolver is deleting this endpoint and the associated network interfaces.

        Parameters:
        status - A code that specifies the current status of the Resolver endpoint. Valid values include the following:

        • CREATING: Resolver is creating and configuring one or more Amazon VPC network interfaces for this endpoint.

        • OPERATIONAL: The Amazon VPC network interfaces for this endpoint are correctly configured and able to pass inbound or outbound DNS queries between your network and Resolver.

        • UPDATING: Resolver is associating or disassociating one or more network interfaces with this endpoint.

        • AUTO_RECOVERING: Resolver is trying to recover one or more of the network interfaces that are associated with this endpoint. During the recovery process, the endpoint functions with limited capacity because of the limit on the number of DNS queries per IP address (per network interface). For the current limit, see Limits on Route 53 Resolver.

        • ACTION_NEEDED: This endpoint is unhealthy, and Resolver can't automatically recover it. To resolve the problem, we recommend that you check each IP address that you associated with the endpoint. For each IP address that isn't available, add another IP address and then delete the IP address that isn't available. (An endpoint must always include at least two IP addresses.) A status of ACTION_NEEDED can have a variety of causes. Here are two common causes:

          • One or more of the network interfaces that are associated with the endpoint were deleted using Amazon VPC.

          • The network interface couldn't be created for some reason that's outside the control of Resolver.

        • DELETING: Resolver is deleting this endpoint and the associated network interfaces.

        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        ResolverEndpointStatus, ResolverEndpointStatus

      • status

        ResolverEndpoint.Builder status​(ResolverEndpointStatus status)

        A code that specifies the current status of the Resolver endpoint. Valid values include the following:

        • CREATING: Resolver is creating and configuring one or more Amazon VPC network interfaces for this endpoint.

        • OPERATIONAL: The Amazon VPC network interfaces for this endpoint are correctly configured and able to pass inbound or outbound DNS queries between your network and Resolver.

        • UPDATING: Resolver is associating or disassociating one or more network interfaces with this endpoint.

        • AUTO_RECOVERING: Resolver is trying to recover one or more of the network interfaces that are associated with this endpoint. During the recovery process, the endpoint functions with limited capacity because of the limit on the number of DNS queries per IP address (per network interface). For the current limit, see Limits on Route 53 Resolver.

        • ACTION_NEEDED: This endpoint is unhealthy, and Resolver can't automatically recover it. To resolve the problem, we recommend that you check each IP address that you associated with the endpoint. For each IP address that isn't available, add another IP address and then delete the IP address that isn't available. (An endpoint must always include at least two IP addresses.) A status of ACTION_NEEDED can have a variety of causes. Here are two common causes:

          • One or more of the network interfaces that are associated with the endpoint were deleted using Amazon VPC.

          • The network interface couldn't be created for some reason that's outside the control of Resolver.

        • DELETING: Resolver is deleting this endpoint and the associated network interfaces.

        Parameters:
        status - A code that specifies the current status of the Resolver endpoint. Valid values include the following:

        • CREATING: Resolver is creating and configuring one or more Amazon VPC network interfaces for this endpoint.

        • OPERATIONAL: The Amazon VPC network interfaces for this endpoint are correctly configured and able to pass inbound or outbound DNS queries between your network and Resolver.

        • UPDATING: Resolver is associating or disassociating one or more network interfaces with this endpoint.

        • AUTO_RECOVERING: Resolver is trying to recover one or more of the network interfaces that are associated with this endpoint. During the recovery process, the endpoint functions with limited capacity because of the limit on the number of DNS queries per IP address (per network interface). For the current limit, see Limits on Route 53 Resolver.

        • ACTION_NEEDED: This endpoint is unhealthy, and Resolver can't automatically recover it. To resolve the problem, we recommend that you check each IP address that you associated with the endpoint. For each IP address that isn't available, add another IP address and then delete the IP address that isn't available. (An endpoint must always include at least two IP addresses.) A status of ACTION_NEEDED can have a variety of causes. Here are two common causes:

          • One or more of the network interfaces that are associated with the endpoint were deleted using Amazon VPC.

          • The network interface couldn't be created for some reason that's outside the control of Resolver.

        • DELETING: Resolver is deleting this endpoint and the associated network interfaces.

        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        ResolverEndpointStatus, ResolverEndpointStatus

      • statusMessage

        ResolverEndpoint.Builder statusMessage​(String statusMessage)

        A detailed description of the status of the Resolver endpoint.

        Parameters:
        statusMessage - A detailed description of the status of the Resolver endpoint.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • creationTime

        ResolverEndpoint.Builder creationTime​(String creationTime)

        The date and time that the endpoint was created, in Unix time format and Coordinated Universal Time (UTC).

        Parameters:
        creationTime - The date and time that the endpoint was created, in Unix time format and Coordinated Universal Time (UTC).
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • modificationTime

        ResolverEndpoint.Builder modificationTime​(String modificationTime)

        The date and time that the endpoint was last modified, in Unix time format and Coordinated Universal Time (UTC).

        Parameters:
        modificationTime - The date and time that the endpoint was last modified, in Unix time format and Coordinated Universal Time (UTC).
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • outpostArn

        ResolverEndpoint.Builder outpostArn​(String outpostArn)

        The ARN (Amazon Resource Name) for the Outpost.

        Parameters:
        outpostArn - The ARN (Amazon Resource Name) for the Outpost.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • preferredInstanceType

        ResolverEndpoint.Builder preferredInstanceType​(String preferredInstanceType)

        The Amazon EC2 instance type.

        Parameters:
        preferredInstanceType - The Amazon EC2 instance type.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • resolverEndpointType

        ResolverEndpoint.Builder resolverEndpointType​(String resolverEndpointType)

        The Resolver endpoint IP address type.

        Parameters:
        resolverEndpointType - The Resolver endpoint IP address type.
        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        ResolverEndpointType, ResolverEndpointType

      • protocolsWithStrings

        ResolverEndpoint.Builder protocolsWithStrings​(Collection<String> protocols)

        Protocols used for the endpoint. DoH-FIPS is applicable for inbound endpoints only.

        For an inbound endpoint you can apply the protocols as follows:

        • Do53 and DoH in combination.

        • Do53 and DoH-FIPS in combination.

        • Do53 alone.

        • DoH alone.

        • DoH-FIPS alone.

        • None, which is treated as Do53.

        For an outbound endpoint you can apply the protocols as follows:

        • Do53 and DoH in combination.

        • Do53 alone.

        • DoH alone.

        • None, which is treated as Do53.

        Parameters:
        protocols - Protocols used for the endpoint. DoH-FIPS is applicable for inbound endpoints only.

        For an inbound endpoint you can apply the protocols as follows:

        • Do53 and DoH in combination.

        • Do53 and DoH-FIPS in combination.

        • Do53 alone.

        • DoH alone.

        • DoH-FIPS alone.

        • None, which is treated as Do53.

        For an outbound endpoint you can apply the protocols as follows:

        • Do53 and DoH in combination.

        • Do53 alone.

        • DoH alone.

        • None, which is treated as Do53.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • protocolsWithStrings

        ResolverEndpoint.Builder protocolsWithStrings​(String... protocols)

        Protocols used for the endpoint. DoH-FIPS is applicable for inbound endpoints only.

        For an inbound endpoint you can apply the protocols as follows:

        • Do53 and DoH in combination.

        • Do53 and DoH-FIPS in combination.

        • Do53 alone.

        • DoH alone.

        • DoH-FIPS alone.

        • None, which is treated as Do53.

        For an outbound endpoint you can apply the protocols as follows:

        • Do53 and DoH in combination.

        • Do53 alone.

        • DoH alone.

        • None, which is treated as Do53.

        Parameters:
        protocols - Protocols used for the endpoint. DoH-FIPS is applicable for inbound endpoints only.

        For an inbound endpoint you can apply the protocols as follows:

        • Do53 and DoH in combination.

        • Do53 and DoH-FIPS in combination.

        • Do53 alone.

        • DoH alone.

        • DoH-FIPS alone.

        • None, which is treated as Do53.

        For an outbound endpoint you can apply the protocols as follows:

        • Do53 and DoH in combination.

        • Do53 alone.

        • DoH alone.

        • None, which is treated as Do53.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • protocols

        ResolverEndpoint.Builder protocols​(Collection<Protocol> protocols)

        Protocols used for the endpoint. DoH-FIPS is applicable for inbound endpoints only.

        For an inbound endpoint you can apply the protocols as follows:

        • Do53 and DoH in combination.

        • Do53 and DoH-FIPS in combination.

        • Do53 alone.

        • DoH alone.

        • DoH-FIPS alone.

        • None, which is treated as Do53.

        For an outbound endpoint you can apply the protocols as follows:

        • Do53 and DoH in combination.

        • Do53 alone.

        • DoH alone.

        • None, which is treated as Do53.

        Parameters:
        protocols - Protocols used for the endpoint. DoH-FIPS is applicable for inbound endpoints only.

        For an inbound endpoint you can apply the protocols as follows:

        • Do53 and DoH in combination.

        • Do53 and DoH-FIPS in combination.

        • Do53 alone.

        • DoH alone.

        • DoH-FIPS alone.

        • None, which is treated as Do53.

        For an outbound endpoint you can apply the protocols as follows:

        • Do53 and DoH in combination.

        • Do53 alone.

        • DoH alone.

        • None, which is treated as Do53.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • protocols

        ResolverEndpoint.Builder protocols​(Protocol... protocols)

        Protocols used for the endpoint. DoH-FIPS is applicable for inbound endpoints only.

        For an inbound endpoint you can apply the protocols as follows:

        • Do53 and DoH in combination.

        • Do53 and DoH-FIPS in combination.

        • Do53 alone.

        • DoH alone.

        • DoH-FIPS alone.

        • None, which is treated as Do53.

        For an outbound endpoint you can apply the protocols as follows:

        • Do53 and DoH in combination.

        • Do53 alone.

        • DoH alone.

        • None, which is treated as Do53.

        Parameters:
        protocols - Protocols used for the endpoint. DoH-FIPS is applicable for inbound endpoints only.

        For an inbound endpoint you can apply the protocols as follows:

        • Do53 and DoH in combination.

        • Do53 and DoH-FIPS in combination.

        • Do53 alone.

        • DoH alone.

        • DoH-FIPS alone.

        • None, which is treated as Do53.

        For an outbound endpoint you can apply the protocols as follows:

        • Do53 and DoH in combination.

        • Do53 alone.

        • DoH alone.

        • None, which is treated as Do53.

        Returns:
        Returns a reference to this object so that method calls can be chained together.